mptcp/openmptcprouter
1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-03-09 15:40:20 +00:00
Code Issues Releases Wiki Activity
openmptcprouter/6.1/target/linux/bcm27xx/patches-6.1/950-0794-dts-2712-Update-for-device-tree.patch
Ycarus (Yannick Chabanois) 3743692973 Fix RPI5 support
2023-11-17 17:31:36 +01:00

7672 lines
204 KiB
Diff
Raw Blame History

From 58561ed02aa4c45614edf2bd8dad956ab02220ec Mon Sep 17 00:00:00 2001
From: Dom Cobley <popcornmix@gmail.com>
Date: Tue, 19 Sep 2023 15:55:00 +0100
Subject: [PATCH] dts: 2712: Update for device tree
dtoverlays: Fix up edt5406 entries to match with vc4-kms-dsi-7inch
vc4-kms-dsi-7inch expects the touch fragment to be named ts_i2c_frag,
but edt5406 didn't do this.
Fixes: 736d601fb38c ("dts: 2712: Update for device tree")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 3 +
arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts | 3 +
arch/arm/boot/dts/bcm2708-rpi-b.dts | 3 +
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 3 +
arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 1 +
arch/arm/boot/dts/bcm2708-rpi-zero.dts | 1 +
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 3 +
arch/arm/boot/dts/bcm2709-rpi-cm2.dts | 3 +
arch/arm/boot/dts/bcm270x-rpi.dtsi | 3 +
arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 3 +
arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 3 +
arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 3 +
arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 3 +
arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts | 3 +
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 +
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 3 +
arch/arm/boot/dts/bcm2711-rpi-cm4s.dts | 3 +
arch/arm/boot/dts/bcm2712-rpi-5-b.dts | 824 +++++++++++
arch/arm/boot/dts/bcm2712-rpi.dtsi | 281 ++++
arch/arm/boot/dts/bcm2712.dtsi | 1287 +++++++++++++++++
arch/arm/boot/dts/overlays/Makefile | 23 +
arch/arm/boot/dts/overlays/README | 360 ++++-
.../dts/overlays/adau1977-adc-overlay.dts | 4 +-
.../dts/overlays/adau7002-simple-overlay.dts | 4 +-
.../overlays/akkordion-iqdacplus-overlay.dts | 4 +-
.../allo-boss-dac-pcm512x-audio-overlay.dts | 10 +-
.../overlays/allo-boss2-dac-audio-overlay.dts | 2 +-
.../dts/overlays/allo-digione-overlay.dts | 4 +-
.../allo-katana-dac-audio-overlay.dts | 2 +-
.../allo-piano-dac-pcm512x-audio-overlay.dts | 4 +-
...o-piano-dac-plus-pcm512x-audio-overlay.dts | 4 +-
.../boot/dts/overlays/applepi-dac-overlay.dts | 4 +-
.../dts/overlays/arducam-64mp-overlay.dts | 2 +-
.../overlays/arducam-pivariety-overlay.dts | 2 +-
.../overlays/audioinjector-addons-overlay.dts | 4 +-
.../audioinjector-bare-i2s-overlay.dts | 6 +-
...dioinjector-isolated-soundcard-overlay.dts | 4 +-
.../overlays/audioinjector-ultra-overlay.dts | 6 +-
.../audioinjector-wm8731-audio-overlay.dts | 4 +-
.../dts/overlays/audiosense-pi-overlay.dts | 4 +-
.../boot/dts/overlays/chipdip-dac-overlay.dts | 4 +-
.../dts/overlays/cirrus-wm5102-overlay.dts | 4 +-
.../boot/dts/overlays/dacberry400-overlay.dts | 4 +-
.../dts/overlays/dionaudio-kiwi-overlay.dts | 4 +-
.../dts/overlays/dionaudio-loco-overlay.dts | 4 +-
.../overlays/dionaudio-loco-v2-overlay.dts | 4 +-
.../dts/overlays/disable-bt-pi5-overlay.dts | 17 +
.../dts/overlays/disable-wifi-pi5-overlay.dts | 13 +
arch/arm/boot/dts/overlays/draws-overlay.dts | 6 +-
.../boot/dts/overlays/edt-ft5406-overlay.dts | 22 +-
arch/arm/boot/dts/overlays/edt-ft5406.dtsi | 2 +-
.../boot/dts/overlays/fe-pi-audio-overlay.dts | 4 +-
.../boot/dts/overlays/ghost-amp-overlay.dts | 4 +-
.../googlevoicehat-soundcard-overlay.dts | 4 +-
.../dts/overlays/hifiberry-amp-overlay.dts | 4 +-
.../dts/overlays/hifiberry-amp100-overlay.dts | 11 +-
.../dts/overlays/hifiberry-amp3-overlay.dts | 4 +-
.../dts/overlays/hifiberry-dac-overlay.dts | 4 +-
.../overlays/hifiberry-dacplus-overlay.dts | 11 +-
.../overlays/hifiberry-dacplusadc-overlay.dts | 10 +-
.../hifiberry-dacplusadcpro-overlay.dts | 10 +-
.../overlays/hifiberry-dacplusdsp-overlay.dts | 4 +-
.../overlays/hifiberry-dacplushd-overlay.dts | 4 +-
.../dts/overlays/hifiberry-digi-overlay.dts | 4 +-
.../overlays/hifiberry-digi-pro-overlay.dts | 4 +-
.../boot/dts/overlays/i-sabre-q2m-overlay.dts | 4 +-
.../boot/dts/overlays/i2c0-pi5-overlay.dts | 34 +
.../boot/dts/overlays/i2c1-pi5-overlay.dts | 34 +
.../boot/dts/overlays/i2c2-pi5-overlay.dts | 21 +
.../boot/dts/overlays/i2c3-pi5-overlay.dts | 22 +
.../arm/boot/dts/overlays/i2s-dac-overlay.dts | 4 +-
arch/arm/boot/dts/overlays/imx219-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/imx258-overlay.dts | 2 +-
.../boot/dts/overlays/imx290_327-overlay.dtsi | 2 +-
arch/arm/boot/dts/overlays/imx296-overlay.dts | 2 +-
.../boot/dts/overlays/imx477_378-overlay.dtsi | 2 +-
arch/arm/boot/dts/overlays/imx519-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/imx708-overlay.dts | 4 +-
.../dts/overlays/iqaudio-codec-overlay.dts | 4 +-
.../boot/dts/overlays/iqaudio-dac-overlay.dts | 4 +-
.../dts/overlays/iqaudio-dacplus-overlay.dts | 4 +-
.../iqaudio-digi-wm8804-audio-overlay.dts | 4 +-
.../arm/boot/dts/overlays/irs1125-overlay.dts | 2 +-
.../dts/overlays/justboom-both-overlay.dts | 4 +-
.../dts/overlays/justboom-dac-overlay.dts | 4 +-
.../dts/overlays/justboom-digi-overlay.dts | 4 +-
.../boot/dts/overlays/max98357a-overlay.dts | 6 +-
.../boot/dts/overlays/mbed-dac-overlay.dts | 6 +-
.../boot/dts/overlays/merus-amp-overlay.dts | 4 +-
.../dts/overlays/midi-uart0-pi5-overlay.dts | 35 +
.../dts/overlays/midi-uart1-pi5-overlay.dts | 35 +
.../dts/overlays/midi-uart2-pi5-overlay.dts | 35 +
.../dts/overlays/midi-uart3-pi5-overlay.dts | 35 +
.../dts/overlays/midi-uart4-pi5-overlay.dts | 35 +
arch/arm/boot/dts/overlays/ov2311-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/ov5647-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/ov7251-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/ov9281-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/overlay_map.dts | 226 +++
arch/arm/boot/dts/overlays/pibell-overlay.dts | 6 +-
.../arm/boot/dts/overlays/pifi-40-overlay.dts | 4 +-
.../boot/dts/overlays/pifi-dac-hd-overlay.dts | 4 +-
.../dts/overlays/pifi-dac-zero-overlay.dts | 4 +-
.../dts/overlays/pifi-mini-210-overlay.dts | 4 +-
.../arm/boot/dts/overlays/pisound-overlay.dts | 4 +-
.../boot/dts/overlays/proto-codec-overlay.dts | 4 +-
.../rra-digidac1-wm8741-audio-overlay.dts | 4 +-
.../dts/overlays/spi2-1cs-pi5-overlay.dts | 33 +
.../dts/overlays/spi2-2cs-pi5-overlay.dts | 44 +
.../dts/overlays/spi3-1cs-pi5-overlay.dts | 33 +
.../dts/overlays/spi3-2cs-pi5-overlay.dts | 44 +
.../dts/overlays/spi5-1cs-pi5-overlay.dts | 33 +
.../dts/overlays/spi5-2cs-pi5-overlay.dts | 44 +
.../dts/overlays/superaudioboard-overlay.dts | 6 +-
.../dts/overlays/tc358743-audio-overlay.dts | 10 +-
.../boot/dts/overlays/tc358743-overlay.dts | 2 +-
.../boot/dts/overlays/uart0-pi5-overlay.dts | 17 +
.../boot/dts/overlays/uart1-pi5-overlay.dts | 17 +
.../boot/dts/overlays/uart2-pi5-overlay.dts | 17 +
.../boot/dts/overlays/uart3-pi5-overlay.dts | 17 +
.../boot/dts/overlays/uart4-pi5-overlay.dts | 17 +
arch/arm/boot/dts/overlays/udrc-overlay.dts | 6 +-
.../dts/overlays/ugreen-dabboard-overlay.dts | 10 +-
.../dts/overlays/vc4-fkms-v3d-overlay.dts | 6 +
.../dts/overlays/vc4-fkms-v3d-pi4-overlay.dts | 6 +
.../overlays/vc4-kms-dsi-7inch-overlay.dts | 18 +-
.../vc4-kms-dsi-waveshare-panel-overlay.dts | 8 +-
.../dts/overlays/vc4-kms-v3d-pi5-overlay.dts | 147 ++
.../dts/overlays/vc4-kms-vga666-overlay.dts | 9 +-
.../dts/overlays/wm8960-soundcard-overlay.dts | 4 +-
arch/arm/boot/dts/rp1.dtsi | 1168 +++++++++++++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
.../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 1 +
134 files changed, 5143 insertions(+), 264 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2712-rpi-5-b.dts
create mode 100644 arch/arm/boot/dts/bcm2712-rpi.dtsi
create mode 100644 arch/arm/boot/dts/bcm2712.dtsi
create mode 100644 arch/arm/boot/dts/overlays/disable-bt-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/i2c0-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/i2c1-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/i2c2-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/i2c3-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/midi-uart1-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/midi-uart2-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/midi-uart3-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/midi-uart4-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/uart0-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/uart1-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/uart2-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/uart3-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/uart4-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-pi5-overlay.dts
create mode 100644 arch/arm/boot/dts/rp1.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -18,7 +18,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2709-rpi-cm2.dtb \
bcm2710-rpi-cm3.dtb \
bcm2711-rpi-cm4.dtb \
- bcm2711-rpi-cm4s.dtb
+ bcm2711-rpi-cm4s.dtb \
+ bcm2712-rpi-5-b.dtb
dtb-$(CONFIG_ARCH_ALPINE) += \
alpine-db.dtb
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -192,6 +192,9 @@ i2c_arm: &i2c1 {
i2c_vc: &i2c0 {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
@@ -203,6 +203,9 @@ i2c_arm: &i2c0 {
i2c_vc: &i2c1 {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -185,6 +185,9 @@ i2c_arm: &i2c1 {
i2c_vc: &i2c0 {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -19,6 +19,9 @@ cam0_reg: &cam0_regulator {
gpio = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
+i2c_csi_dsi0: &i2c0 {
+};
+
&uart0 {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
@@ -243,6 +243,7 @@ cam0_reg: &cam_dummy_reg {
i2c_arm: &i2c1 {};
i2c_vc: &i2c0 {};
+i2c_csi_dsi0: &i2c0 {};
/ {
__overrides__ {
--- a/arch/arm/boot/dts/bcm2708-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts
@@ -178,6 +178,7 @@ cam0_reg: &cam_dummy_reg {
i2c_arm: &i2c1 {};
i2c_vc: &i2c0 {};
+i2c_csi_dsi0: &i2c0 {};
/ {
__overrides__ {
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -186,6 +186,9 @@
cam0_reg: &cam_dummy_reg {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2709-rpi-cm2.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-cm2.dts
@@ -20,6 +20,9 @@ cam0_reg: &cam0_regulator {
gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
};
+i2c_csi_dsi0: &i2c0 {
+};
+
&uart0 {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm270x-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm270x-rpi.dtsi
@@ -127,6 +127,9 @@
status = "disabled";
};
+i2s_clk_producer: &i2s {};
+i2s_clk_consumer: &i2s {};
+
&clocks {
firmware = <&firmware>;
};
--- a/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
@@ -186,6 +186,9 @@
cam0_reg: &cam_dummy_reg {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
@@ -274,6 +274,9 @@
cam0_reg: &cam_dummy_reg {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
@@ -283,6 +283,9 @@
cam0_reg: &cam_dummy_reg {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
@@ -19,6 +19,9 @@ cam0_reg: &cam0_regulator {
gpio = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
+i2c_csi_dsi0: &i2c0 {
+};
+
&uart0 {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts
@@ -262,6 +262,9 @@
cam0_reg: &cam_dummy_reg {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -400,6 +400,9 @@
cam0_reg: &cam_dummy_reg {
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
@@ -409,6 +409,9 @@ cam0_reg: &cam1_reg {
gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}";
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts
@@ -282,6 +282,9 @@ cam0_reg: &cam0_regulator {
status = "disabled";
};
+i2c_csi_dsi0: &i2c0 {
+};
+
/ {
__overrides__ {
audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}";
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2712-rpi-5-b.dts
@@ -0,0 +1,824 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/rp1.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/rp1.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+#define i2c0 _i2c0
+#define i2c3 _i2c3
+#define i2c4 _i2c4
+#define i2c5 _i2c5
+#define i2c6 _i2c6
+#define i2c8 _i2c8
+#define i2s _i2s
+#define pwm0 _pwm0
+#define pwm1 _pwm1
+#define spi0 _spi0
+#define spi3 _spi3
+#define spi4 _spi4
+#define spi5 _spi5
+#define spi6 _spi6
+#define uart0 _uart0
+#define uart2 _uart2
+#define uart3 _uart3
+#define uart4 _uart4
+#define uart5 _uart5
+
+#include "bcm2712.dtsi"
+
+#undef i2c0
+#undef i2c3
+#undef i2c4
+#undef i2c5
+#undef i2c6
+#undef i2c8
+#undef i2s
+#undef pwm0
+#undef pwm1
+#undef spi0
+#undef spi3
+#undef spi4
+#undef spi5
+#undef spi6
+#undef uart0
+#undef uart2
+#undef uart3
+#undef uart4
+#undef uart5
+
+/ {
+ compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+ model = "Raspberry Pi 5 Model B";
+
+ /* Will be filled by the bootloader */
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0x28000000>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ pwr_led: led-pwr {
+ label = "PWR";
+ gpios = <&rp1_gpio 44 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "none";
+ };
+
+ act_led: led-act {
+ label = "ACT";
+ gpios = <&gio_aon 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sd_io_1v8_reg: sd_io_1v8_reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-sd-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-settling-time-us = <5000>;
+ gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ status = "okay";
+ };
+
+ sd_vcc_reg: sd_vcc_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ wl_on_reg: wl_on_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "wl-on-regulator";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-0 = <&wl_on_pins>;
+ pinctrl-names = "default";
+
+ gpio = <&gio 28 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <150000>;
+ enable-active-high;
+ };
+
+ clocks: clocks {
+ };
+
+ cam1_clk: cam1_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ status = "disabled";
+ };
+
+ cam0_clk: cam0_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ status = "disabled";
+ };
+
+ cam0_reg: cam0_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam0_reg";
+ enable-active-high;
+ status = "okay";
+ gpio = <&rp1_gpio 34 0>; // CD0_IO0_MICCLK, to MIPI 0 connector
+ };
+
+ cam1_reg: cam1_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam1_reg";
+ enable-active-high;
+ status = "okay";
+ gpio = <&rp1_gpio 46 0>; // CD1_IO0_MICCLK, to MIPI 1 connector
+ };
+
+ cam_dummy_reg: cam_dummy_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam-dummy-reg";
+ status = "okay";
+ };
+
+ dummy: dummy {
+ // A target for unwanted overlay fragments
+ };
+};
+
+rp1_target: &pcie2 {
+ brcm,vdm-qos-map = <0xbbaa9888>;
+ aspm-no-l0s;
+ status = "okay";
+};
+
+// Add some labels to 2712 device
+
+// The system UART
+uart10: &_uart0 { status = "okay"; };
+
+// The system SPI for the bootloader EEPROM
+spi10: &_spi0 { status = "okay"; };
+
+i2c_rp1boot: &_i2c3 { };
+
+#include "rp1.dtsi"
+
+&rp1 {
+ // PCIe address space layout:
+ // 00_00000000-00_00xxxxxx = RP1 peripherals
+ // 10_00000000-1x_xxxxxxxx = up to 64GB system RAM
+
+ // outbound access aimed at PCIe 0_00xxxxxx -> RP1 c0_40xxxxxx
+ // This is the RP1 peripheral space
+ ranges = <0xc0 0x40000000
+ 0x02000000 0x00 0x00000000
+ 0x00 0x00400000>;
+
+ dma-ranges =
+ // inbound RP1 1x_xxxxxxxx -> PCIe 1x_xxxxxxxx
+ <0x10 0x00000000
+ 0x43000000 0x10 0x00000000
+ 0x10 0x00000000>,
+
+ // inbound RP1 c0_40xxxxxx -> PCIe 00_00xxxxxx
+ // This allows the RP1 DMA controller to address RP1 hardware
+ <0xc0 0x40000000
+ 0x02000000 0x0 0x00000000
+ 0x0 0x00400000>,
+
+ // inbound RP1 0x_xxxxxxxx -> PCIe 1x_xxxxxxxx
+ <0x00 0x00000000
+ 0x02000000 0x10 0x00000000
+ 0x10 0x00000000>;
+};
+
+// Expose RP1 nodes as system nodes with labels
+
+&rp1_dma {
+ status = "okay";
+};
+
+&rp1_eth {
+ status = "okay";
+ phy-handle = <&phy1>;
+ phy-reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <5>;
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ brcm,powerdown-enable;
+ };
+};
+
+gpio: &rp1_gpio {
+ status = "okay";
+};
+
+aux: &dummy {};
+
+&rp1_usb0 {
+ pinctrl-0 = <&usb_vbus_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rp1_usb1 {
+ status = "okay";
+};
+
+#include "bcm2712-rpi.dtsi"
+
+// A few extra labels to keep overlays happy
+
+i2c0if: &rp1_gpio {};
+i2c0mux: &rp1_gpio {};
+
+i2c_csi_dsi0: &i2c6 { // Note: This is for MIPI0 connector only
+ pinctrl-0 = <&rp1_i2c6_38_39>;
+ pinctrl-names = "default";
+};
+
+i2c_csi_dsi1: &i2c4 { // Note: This is for MIPI1 connector only
+ pinctrl-0 = <&rp1_i2c4_40_41>;
+ pinctrl-names = "default";
+};
+
+i2c_csi_dsi: &i2c_csi_dsi1 { }; // An alias for compatibility
+
+csi0: &rp1_csi0 { };
+csi1: &rp1_csi1 { };
+dsi0: &rp1_dsi0 { };
+dsi1: &rp1_dsi1 { };
+dpi: &rp1_dpi { };
+vec: &rp1_vec { };
+dpi_gpio0: &rp1_dpi_24bit_gpio0 { };
+dpi_gpio1: &rp1_dpi_24bit_gpio2 { };
+dpi_18bit_cpadhi_gpio0: &rp1_dpi_18bit_cpadhi_gpio0 { };
+dpi_18bit_cpadhi_gpio2: &rp1_dpi_18bit_cpadhi_gpio2 { };
+dpi_18bit_gpio0: &rp1_dpi_18bit_gpio0 { };
+dpi_18bit_gpio2: &rp1_dpi_18bit_gpio2 { };
+dpi_16bit_cpadhi_gpio0: &rp1_dpi_16bit_cpadhi_gpio0 { };
+dpi_16bit_cpadhi_gpio2: &rp1_dpi_16bit_cpadhi_gpio2 { };
+dpi_16bit_gpio0: &rp1_dpi_16bit_gpio0 { };
+dpi_16bit_gpio2: &rp1_dpi_16bit_gpio2 { };
+
+/* Add the IOMMUs for some RP1 bus masters */
+
+&csi0 {
+ iommus = <&iommu5>;
+};
+
+&csi1 {
+ iommus = <&iommu5>;
+};
+
+&dsi0 {
+ iommus = <&iommu5>;
+};
+
+&dsi1 {
+ iommus = <&iommu5>;
+};
+
+&dpi {
+ iommus = <&iommu5>;
+};
+
+&vec {
+ iommus = <&iommu5>;
+};
+
+&ddc0 {
+ status = "disabled";
+};
+
+&ddc1 {
+ status = "disabled";
+};
+
+&hdmi0 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ status = "disabled";
+};
+
+&hdmi1 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ status = "disabled";
+};
+
+&hvs {
+ clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+ clock-names = "core", "disp";
+};
+
+&mop {
+ status = "disabled";
+};
+
+&moplet {
+ status = "disabled";
+};
+
+&pixelvalve0 {
+ status = "disabled";
+};
+
+&pixelvalve1 {
+ status = "disabled";
+};
+
+&disp_intr {
+ status = "disabled";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+ pinctrl-0 = <&emmc_sd_pulls>, <&emmc_aon_cd_pins>;
+ pinctrl-names = "default";
+ vqmmc-supply = <&sd_io_1v8_reg>;
+ vmmc-supply = <&sd_vcc_reg>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ //broken-cd;
+ //no-1-8-v;
+ status = "okay";
+};
+
+&pinctrl_aon {
+ emmc_aon_cd_pins: emmc_aon_cd_pins {
+ function = "sd_card_g";
+ pins = "aon_gpio5";
+ bias-pull-up;
+ };
+
+ /* Slight hack - only one PWM pin (status LED) is usable */
+ aon_pwm_1pin: aon_pwm_1pin {
+ function = "aon_pwm";
+ pins = "aon_gpio9";
+ };
+};
+
+&pinctrl {
+ pwr_button_pins: pwr_button_pins {
+ function = "gpio";
+ pins = "gpio20";
+ bias-pull-up;
+ };
+
+ wl_on_pins: wl_on_pins {
+ function = "gpio";
+ pins = "gpio28";
+ };
+
+ bt_shutdown_pins: bt_shutdown_pins {
+ function = "gpio";
+ pins = "gpio29";
+ };
+
+ emmc_sd_pulls: emmc_sd_pulls {
+ function = "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
+ bias-pull-up;
+ };
+};
+
+/* uarta communicates with the BT module */
+&uarta {
+ uart-has-rtscts;
+ auto-flow-control;
+ status = "okay";
+ clock-frequency = <96000000>;
+ pinctrl-0 = <&uarta_24_pins &bt_shutdown_pins>;
+ pinctrl-names = "default";
+
+ bluetooth: bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+ shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+ local-bd-address = [ 00 00 00 00 00 00 ];
+ };
+};
+
+&i2c_rp1boot {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&i2c3_m4_agpio0_pins>;
+ pinctrl-names = "default";
+};
+
+/ {
+ chosen: chosen {
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
+ stdout-path = "serial10:115200n8";
+ };
+
+ fan: cooling_fan {
+ status = "disabled";
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ cooling-levels = <0 75 125 175 250>;
+ pwms = <&rp1_pwm1 3 41566 PWM_POLARITY_INVERTED>;
+ rpm-regmap = <&rp1_pwm1>;
+ rpm-offset = <0x3c>;
+ };
+
+ pwr_button {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_button_pins>;
+ status = "okay";
+
+ pwr_key: pwr {
+ label = "pwr_button";
+ // linux,code = <205>; // KEY_SUSPEND
+ linux,code = <116>; // KEY_POWER
+ gpios = <&gio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>; // ms
+ };
+ };
+};
+
+&usb {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+/* SDIO2 drives the WLAN interface */
+&sdio2 {
+ pinctrl-0 = <&sdio2_30_pins>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ vmmc-supply = <&wl_on_reg>;
+ sd-uhs-ddr50;
+ non-removable;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+};
+
+&rpivid {
+ status = "okay";
+};
+
+&pinctrl {
+ spi10_gpio2: spi10_gpio2 {
+ function = "vc_spi0";
+ pins = "gpio2", "gpio3", "gpio4";
+ bias-disable;
+ };
+
+ spi10_cs_gpio1: spi10_cs_gpio1 {
+ function = "gpio";
+ pins = "gpio1";
+ bias-pull-up;
+ };
+};
+
+spi10_pins: &spi10_gpio2 {};
+spi10_cs_pins: &spi10_cs_gpio1 {};
+
+&spi10 {
+ pinctrl-names = "default";
+ cs-gpios = <&gio 1 1>;
+ pinctrl-0 = <&spi10_pins &spi10_cs_pins>;
+
+ spidev10: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <20000000>;
+ status = "okay";
+ };
+};
+
+// =============================================
+// Board specific stuff here
+
+&gio_aon {
+ // Don't use GIO_AON as an interrupt controller because it will
+ // clash with the firmware monitoring the PMIC interrupt via the VPU.
+
+ /delete-property/ interrupt-controller;
+};
+
+&main_aon_irq {
+ // Don't use the MAIN_AON_IRQ interrupt controller because it will
+ // clash with the firmware monitoring the PMIC interrupt via the VPU.
+
+ status = "disabled";
+};
+
+&rp1_pwm1 {
+ status = "disabled";
+ pinctrl-0 = <&rp1_pwm1_gpio45>;
+ pinctrl-names = "default";
+};
+
+&thermal_trips {
+ cpu_tepid: cpu-tepid {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+
+ cpu_warm: cpu-warm {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <67500>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+
+ cpu_vhot: cpu-vhot {
+ temperature = <75000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+};
+
+&cooling_maps {
+ tepid {
+ trip = <&cpu_tepid>;
+ cooling-device = <&fan 1 1>;
+ };
+
+ warm {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan 2 2>;
+ };
+
+ hot {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 3 3>;
+ };
+
+ vhot {
+ trip = <&cpu_vhot>;
+ cooling-device = <&fan 4 4>;
+ };
+
+ melt {
+ trip = <&cpu_crit>;
+ cooling-device = <&fan 4 4>;
+ };
+};
+
+&gio {
+ // The GPIOs above 35 are not used on Pi 5, so shrink the upper bank
+ // to reduce the clutter in gpioinfo/pinctrl
+ brcm,gpio-bank-widths = <32 4>;
+
+ gpio-line-names =
+ "-", // GPIO_000
+ "2712_BOOT_CS_N", // GPIO_001
+ "2712_BOOT_MISO", // GPIO_002
+ "2712_BOOT_MOSI", // GPIO_003
+ "2712_BOOT_SCLK", // GPIO_004
+ "-", // GPIO_005
+ "-", // GPIO_006
+ "-", // GPIO_007
+ "-", // GPIO_008
+ "-", // GPIO_009
+ "-", // GPIO_010
+ "-", // GPIO_011
+ "-", // GPIO_012
+ "-", // GPIO_013
+ "PCIE_SDA", // GPIO_014
+ "PCIE_SCL", // GPIO_015
+ "-", // GPIO_016
+ "-", // GPIO_017
+ "-", // GPIO_018
+ "-", // GPIO_019
+ "PWR_GPIO", // GPIO_020
+ "2712_G21_FS", // GPIO_021
+ "-", // GPIO_022
+ "-", // GPIO_023
+ "BT_RTS", // GPIO_024
+ "BT_CTS", // GPIO_025
+ "BT_TXD", // GPIO_026
+ "BT_RXD", // GPIO_027
+ "WL_ON", // GPIO_028
+ "BT_ON", // GPIO_029
+ "WIFI_SDIO_CLK", // GPIO_030
+ "WIFI_SDIO_CMD", // GPIO_031
+ "WIFI_SDIO_D0", // GPIO_032
+ "WIFI_SDIO_D1", // GPIO_033
+ "WIFI_SDIO_D2", // GPIO_034
+ "WIFI_SDIO_D3"; // GPIO_035
+};
+
+&gio_aon {
+ gpio-line-names =
+ "RP1_SDA", // AON_GPIO_00
+ "RP1_SCL", // AON_GPIO_01
+ "RP1_RUN", // AON_GPIO_02
+ "SD_IOVDD_SEL", // AON_GPIO_03
+ "SD_PWR_ON", // AON_GPIO_04
+ "SD_CDET_N", // AON_GPIO_05
+ "SD_FLG_N", // AON_GPIO_06
+ "-", // AON_GPIO_07
+ "2712_WAKE", // AON_GPIO_08
+ "2712_STAT_LED", // AON_GPIO_09
+ "-", // AON_GPIO_10
+ "-", // AON_GPIO_11
+ "PMIC_INT", // AON_GPIO_12
+ "UART_TX_FS", // AON_GPIO_13
+ "UART_RX_FS", // AON_GPIO_14
+ "-", // AON_GPIO_15
+ "-", // AON_GPIO_16
+
+ // Pad bank0 out to 32 entries
+ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+
+ "HDMI0_SCL", // AON_SGPIO_00
+ "HDMI0_SDA", // AON_SGPIO_01
+ "HDMI1_SCL", // AON_SGPIO_02
+ "HDMI1_SDA", // AON_SGPIO_03
+ "PMIC_SCL", // AON_SGPIO_04
+ "PMIC_SDA"; // AON_SGPIO_05
+
+ rp1_run_hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "RP1 RUN pin";
+ };
+};
+
+&rp1_gpio {
+ gpio-line-names =
+ "ID_SD", // GPIO0
+ "ID_SC", // GPIO1
+ "PIN3", // GPIO2
+ "PIN5", // GPIO3
+ "PIN7", // GPIO4
+ "PIN29", // GPIO5
+ "PIN31", // GPIO6
+ "PIN26", // GPIO7
+ "PIN24", // GPIO8
+ "PIN21", // GPIO9
+ "PIN19", // GPIO10
+ "PIN23", // GPIO11
+ "PIN32", // GPIO12
+ "PIN33", // GPIO13
+ "PIN8", // GPIO14
+ "PIN10", // GPIO15
+ "PIN36", // GPIO16
+ "PIN11", // GPIO17
+ "PIN12", // GPIO18
+ "PIN35", // GPIO19
+ "PIN38", // GPIO20
+ "PIN40", // GPIO21
+ "PIN15", // GPIO22
+ "PIN16", // GPIO23
+ "PIN18", // GPIO24
+ "PIN22", // GPIO25
+ "PIN37", // GPIO26
+ "PIN13", // GPIO27
+
+ "PCIE_RP1_WAKE", // GPIO28
+ "FAN_TACH", // GPIO29
+ "HOST_SDA", // GPIO30
+ "HOST_SCL", // GPIO31
+ "ETH_RST_N", // GPIO32
+ "-", // GPIO33
+
+ "CD0_IO0_MICCLK", // GPIO34
+ "CD0_IO0_MICDAT0", // GPIO35
+ "RP1_PCIE_CLKREQ_N", // GPIO36
+ "-", // GPIO37
+ "CD0_SDA", // GPIO38
+ "CD0_SCL", // GPIO39
+ "CD1_SDA", // GPIO40
+ "CD1_SCL", // GPIO41
+ "USB_VBUS_EN", // GPIO42
+ "USB_OC_N", // GPIO43
+ "RP1_STAT_LED", // GPIO44
+ "FAN_PWM", // GPIO45
+ "CD1_IO0_MICCLK", // GPIO46
+ "2712_WAKE", // GPIO47
+ "CD1_IO1_MICDAT1", // GPIO48
+ "EN_MAX_USB_CUR", // GPIO49
+ "-", // GPIO50
+ "-", // GPIO51
+ "-", // GPIO52
+ "-"; // GPIO53
+
+ usb_vbus_pins: usb_vbus_pins {
+ function = "vbus1";
+ pins = "gpio42", "gpio43";
+ };
+};
+
+/ {
+ aliases: aliases {
+ blconfig = &blconfig;
+ bluetooth = &bluetooth;
+ console = &uart10;
+ ethernet0 = &rp1_eth;
+ wifi0 = &wifi;
+ fb = &fb;
+ mailbox = &mailbox;
+ mmc0 = &sdio1;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ uart4 = &uart4;
+ uart10 = &uart10;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial10 = &uart10;
+ i2c = &i2c_arm;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c10 = &i2c_rp1boot;
+ // Bit-bashed i2c_gpios start at 10
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ spi10 = &spi10;
+ gpio0 = &gpio;
+ gpio1 = &gio;
+ gpio2 = &gio_aon;
+ gpio3 = &pinctrl;
+ gpio4 = &pinctrl_aon;
+ usb0 = &rp1_usb0;
+ usb1 = &rp1_usb1;
+ };
+
+ __overrides__ {
+ bdaddr = <&bluetooth>, "local-bd-address[";
+ button_debounce = <&pwr_key>, "debounce-interval:0";
+ cooling_fan = <&fan>, "status", <&rp1_pwm1>, "status";
+ uart0_console = <&uart0>,"status", <&aliases>, "console=",&uart0;
+ i2c0 = <&i2c0>, "status";
+ i2c1 = <&i2c1>, "status";
+ i2c = <&i2c1>, "status";
+ i2c_arm = <&i2c_arm>, "status";
+ i2c_vc = <&i2c_vc>, "status";
+ i2c_csi_dsi = <&i2c_csi_dsi>, "status";
+ i2c_csi_dsi0 = <&i2c_csi_dsi0>, "status";
+ i2c_csi_dsi1 = <&i2c_csi_dsi1>, "status";
+ i2c0_baudrate = <&i2c0>, "clock-frequency:0";
+ i2c1_baudrate = <&i2c1>, "clock-frequency:0";
+ i2c_baudrate = <&i2c_arm>, "clock-frequency:0";
+ i2c_arm_baudrate = <&i2c_arm>, "clock-frequency:0";
+ i2c_vc_baudrate = <&i2c_vc>, "clock-frequency:0";
+ nvme = <&pciex1>, "status";
+ pciex1 = <&pciex1>, "status";
+ pciex1_gen = <&pciex1> , "max-link-speed:0";
+ pciex1_no_l0s = <&pciex1>, "aspm-no-l0s?";
+ random = <&random>, "status";
+ rtc_bbat_vchg = <&rpi_rtc>, "trickle-charge-microvolt:0";
+ spi = <&spi0>, "status";
+ suspend = <&pwr_key>, "linux,code:0=205";
+ uart0 = <&uart0>, "status";
+ wifiaddr = <&wifi>, "local-mac-address[";
+
+ act_led_activelow = <&act_led>, "active-low?";
+ act_led_trigger = <&act_led>, "linux,default-trigger";
+ pwr_led_activelow = <&pwr_led>, "gpios:8";
+ pwr_led_trigger = <&pwr_led>, "linux,default-trigger";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2712-rpi.dtsi
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&soc {
+ firmware: firmware {
+ compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mboxes = <&mailbox>;
+ dma-ranges;
+
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
+
+ vcio: vcio {
+ compatible = "raspberrypi,vcio";
+ };
+ };
+
+ power: power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <&firmware>;
+ #power-domain-cells = <1>;
+ };
+
+ fb: fb {
+ compatible = "brcm,bcm2708-fb";
+ firmware = <&firmware>;
+ status = "okay";
+ };
+
+ rpi_rtc: rpi_rtc {
+ compatible = "raspberrypi,rpi-rtc";
+ firmware = <&firmware>;
+ status = "okay";
+ trickle-charge-microvolt = <0>;
+ };
+
+ /* Define these notional regulators for use by overlays, etc. */
+ vdd_3v3_reg: fixedregulator_3v3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3v3";
+ };
+
+ vdd_5v0_reg: fixedregulator_5v0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "5v0";
+ };
+};
+
+/ {
+ __overrides__ {
+ arm_freq;
+ };
+};
+
+pciex1: &pcie1 { };
+pciex4: &pcie2 { };
+
+&dma32 {
+ /* The VPU firmware uses DMA channel 11 for VCHIQ */
+ brcm,dma-channel-mask = <0x03f>;
+};
+
+&dma40 {
+ /* The VPU firmware DMA channel 11 for VCHIQ */
+ brcm,dma-channel-mask = <0x07c0>;
+};
+
+&hdmi0 {
+ dmas = <&dma40 (10|(1<<30)|(1<<24)|(10<<16)|(15<<20))>;
+};
+
+&hdmi1 {
+ dmas = <&dma40 (17|(1<<30)|(1<<24)|(10<<16)|(15<<20))>;
+};
+
+&spi10 {
+ dmas = <&dma40 6>, <&dma40 7>;
+ dma-names = "tx", "rx";
+};
+
+&usb {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&rmem {
+ /*
+ * RPi4's co-processor will copy the board's bootloader configuration
+ * into memory for the OS to consume. It'll also update this node with
+ * its placement information.
+ */
+ blconfig: nvram@0 {
+ compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x0>;
+ no-map;
+ status = "disabled";
+ };
+};
+
+&rp1_adc {
+ status = "okay";
+};
+
+/* Add some gpiomem nodes to make the devices accessible to userspace.
+ * /dev/gpiomem<n> should expose the registers for the interface with DT alias
+ * gpio<n>.
+ */
+
+&rp1 {
+ gpiomem@d0000 {
+ /* Export IO_BANKs, RIO_BANKs and PADS_BANKs to userspace */
+ compatible = "raspberrypi,gpiomem";
+ reg = <0xc0 0x400d0000 0x0 0x30000>;
+ chardev-name = "gpiomem0";
+ };
+};
+
+&soc {
+ gpiomem@7d508500 {
+ compatible = "raspberrypi,gpiomem";
+ reg = <0x7d508500 0x40>;
+ chardev-name = "gpiomem1";
+ };
+
+ gpiomem@7d517c00 {
+ compatible = "raspberrypi,gpiomem";
+ reg = <0x7d517c00 0x40>;
+ chardev-name = "gpiomem2";
+ };
+
+ gpiomem@7d504100 {
+ compatible = "raspberrypi,gpiomem";
+ reg = <0x7d504100 0x20>;
+ chardev-name = "gpiomem3";
+ };
+
+ gpiomem@7d510700 {
+ compatible = "raspberrypi,gpiomem";
+ reg = <0x7d510700 0x20>;
+ chardev-name = "gpiomem4";
+ };
+};
+
+i2c0: &rp1_i2c0 { };
+i2c1: &rp1_i2c1 { };
+i2c2: &rp1_i2c2 { };
+i2c3: &rp1_i2c3 { };
+i2c4: &rp1_i2c4 { };
+i2c5: &rp1_i2c5 { };
+i2c6: &rp1_i2c6 { };
+i2s: &rp1_i2s0 { };
+i2s_clk_producer: &rp1_i2s0 { };
+i2s_clk_consumer: &rp1_i2s1 { };
+pwm0: &rp1_pwm0 { };
+pwm1: &rp1_pwm1 { };
+pwm: &pwm0 { };
+spi0: &rp1_spi0 { };
+spi1: &rp1_spi1 { };
+spi2: &rp1_spi2 { };
+spi3: &rp1_spi3 { };
+spi4: &rp1_spi4 { };
+spi5: &rp1_spi5 { };
+
+uart0_pins: &rp1_uart0_14_15 {};
+uart0_ctsrts_pins: &rp1_uart0_ctsrts_16_17 {};
+uart0: &rp1_uart0 {
+ pinctrl-0 = <&uart0_pins>;
+};
+
+uart1_pins: &rp1_uart1_0_1 {};
+uart1_ctsrts_pins: &rp1_uart1_ctsrts_2_3 {};
+uart1: &rp1_uart1 { };
+
+uart2_pins: &rp1_uart2_4_5 {};
+uart2_ctsrts_pins: &rp1_uart2_ctsrts_6_7 {};
+uart2: &rp1_uart2 { };
+
+uart3_pins: &rp1_uart3_8_9 {};
+uart3_ctsrts_pins: &rp1_uart3_ctsrts_10_11 {};
+uart3: &rp1_uart3 { };
+
+uart4_pins: &rp1_uart4_12_13 {};
+uart4_ctsrts_pins: &rp1_uart4_ctsrts_14_15 {};
+uart4: &rp1_uart4 { };
+
+i2c_vc: &i2c0 { // This is pins 27,28 on the header (not MIPI)
+ pinctrl-0 = <&rp1_i2c0_0_1>;
+ pinctrl-names = "default";
+};
+
+i2c_arm: &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rp1_i2c1_2_3>;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rp1_i2c2_4_5>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rp1_i2c3_6_7>;
+};
+
+&i2s_clk_producer {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rp1_i2s0_18_21>;
+};
+
+&i2s_clk_consumer {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rp1_i2s1_18_21>;
+};
+
+spi0_pins: &rp1_spi0_gpio9 {};
+spi0_cs_pins: &rp1_spi0_cs_gpio7 {};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+ spidev0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ };
+
+ spidev1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ };
+};
+
+spi2_pins: &rp1_spi2_gpio1 {};
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+};
+
+spi3_pins: &rp1_spi3_gpio5 {};
+&spi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+};
+
+spi4_pins: &rp1_spi4_gpio9 {};
+&spi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins>;
+};
+
+spi5_pins: &rp1_spi5_gpio13 {};
+&spi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_pins>;
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2712.dtsi
@@ -0,0 +1,1287 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ compatible = "brcm,bcm2712", "brcm,bcm2711";
+ model = "BCM2712";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gicv2>;
+
+ rmem: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ atf@0 {
+ reg = <0x0 0x0 0x80000>;
+ no-map;
+ };
+
+ cma: linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x4000000>; /* 64MB */
+ reusable;
+ linux,cma-default;
+
+ /*
+ * arm64 reserves the CMA by default somewhere in
+ * ZONE_DMA32, that's not good enough for the BCM2711
+ * as some devices can only address the lower 1G of
+ * memory (ZONE_DMA).
+ */
+ alloc-ranges = <0x0 0x00000000 0x40000000>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <2000>;
+ polling-delay = <1000>;
+ coefficients = <(-550) 450000>;
+ thermal-sensors = <&thermal>;
+
+ thermal_trips: trips {
+ cpu_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling_maps: cooling-maps {
+ };
+ };
+ };
+
+ clk_27MHz: clk-27M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "27MHz-clock";
+ };
+
+ clk_108MHz: clk-108M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <108000000>;
+ clock-output-names = "108MHz-clock";
+ };
+
+ hvs: hvs@107c580000 {
+ compatible = "brcm,bcm2712-hvs";
+ reg = <0x10 0x7c580000 0x1a000>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <2>, <9>, <16>;
+ interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+ //iommus = <&iommu4>;
+ status = "disabled";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x7c000000 0x10 0x7c000000 0x04000000>;
+ /* Emulate a contiguous 30-bit address range for DMA */
+ dma-ranges = <0xc0000000 0x00 0x00000000 0x40000000>,
+ <0x7c000000 0x10 0x7c000000 0x04000000>;
+
+ system_timer: timer@7c003000 {
+ compatible = "brcm,bcm2835-system-timer";
+ reg = <0x7c003000 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1000000>;
+ };
+
+ firmwarekms: firmwarekms@7d503000 {
+ compatible = "raspberrypi,rpi-firmware-kms";
+ /* SUN_L2 interrupt reg */
+ reg = <0x7d503000 0x18>;
+ interrupt-parent = <&cpu_l2_irq>;
+ interrupts = <19>;
+ brcm,firmware = <&firmware>;
+ status = "disabled";
+ };
+
+ mailbox: mailbox@7c013880 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7c013880 0x40>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+ };
+
+ pixelvalve0: pixelvalve@7c410000 {
+ compatible = "brcm,bcm2712-pixelvalve0";
+ reg = <0x7c410000 0x100>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve1: pixelvalve@7c411000 {
+ compatible = "brcm,bcm2712-pixelvalve1";
+ reg = <0x7c411000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usb: usb@7c480000 {
+ compatible = "brcm,bcm2835-usb";
+ reg = <0x7c480000 0x10000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk_usb>;
+ clock-names = "otg";
+ phys = <&usbphy>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ mop: mop@7c500000 {
+ compatible = "brcm,bcm2712-mop";
+ reg = <0x7c500000 0x20>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ moplet: moplet@7c501000 {
+ compatible = "brcm,bcm2712-moplet";
+ reg = <0x7c501000 0x20>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ disp_intr: interrupt-controller@7c502000 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7c502000 0x30>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ status = "disabled";
+ };
+
+ dvp: clock@7c700000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7c700000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ /*
+ * This node is the provider for the enable-method for
+ * bringing up secondary cores.
+ */
+ local_intc: local_intc@7cd00000 {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x7cd00000 0x100>;
+ };
+
+ uart0: serial@7d001000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001000 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>,
+ <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00241011>;
+ status = "disabled";
+ };
+
+ uart2: serial@7d001400 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001400 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>,
+ <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00241011>;
+ status = "disabled";
+ };
+
+ uart3: serial@7d001600 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001600 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>,
+ <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00241011>;
+ status = "disabled";
+ };
+
+ uart4: serial@7d001800 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001800 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>,
+ <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00241011>;
+ status = "disabled";
+ };
+
+ uart5: serial@7d001a00 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001a00 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>,
+ <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00241011>;
+ status = "disabled";
+ };
+
+ sdhost: mmc@7d002000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7d002000 0x100>;
+ //interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ status = "disabled";
+ };
+
+ i2s: i2s@7d003000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = <0x7d003000 0x24>;
+ //clocks = <&cprman BCM2835_CLOCK_PCM>;
+ status = "disabled";
+ };
+
+ spi0: spi@7d004000 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7d004000 0x200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@7d004600 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7d004600 0x0200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@7d004800 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7d004800 0x0200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@7d004a00 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7d004a00 0x0200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@7d004c00 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7d004c00 0x0200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@7d005000 {
+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+ reg = <0x7d005000 0x20>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@7d005600 {
+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+ reg = <0x7d005600 0x20>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@7d005800 {
+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+ reg = <0x7d005800 0x20>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@7d005a00 {
+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+ reg = <0x7d005a00 0x20>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@7d005c00 {
+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+ reg = <0x7d005c00 0x20>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@7d005e00 {
+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+ reg = <0x7d005e00 0x20>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vpu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@7d00c000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7d00c000 0x28>;
+ assigned-clock-rates = <10000000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@7d00c800 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7d00c800 0x28>;
+ assigned-clock-rates = <10000000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pm: watchdog@7d200000 {
+ compatible = "brcm,bcm2712-pm";
+ reg = <0x7d200000 0x308>;
+ reg-names = "pm";
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ //clocks = <&cprman BCM2835_CLOCK_V3D>,
+ // <&cprman BCM2835_CLOCK_PERI_IMAGE>,
+ // <&cprman BCM2835_CLOCK_H264>,
+ // <&cprman BCM2835_CLOCK_ISP>;
+ clock-names = "v3d", "peri_image", "h264", "isp";
+ system-power-controller;
+ };
+
+ cprman: cprman@7d202000 {
+ compatible = "brcm,bcm2711-cprman";
+ reg = <0x7d202000 0x2000>;
+ #clock-cells = <1>;
+
+ /* CPRMAN derives almost everything from the
+ * platform's oscillator. However, the DSI
+ * pixel clocks come from the DSI analog PHY.
+ */
+ clocks = <&clk_osc>;
+ status = "disabled";
+ };
+
+ random: rng@7d208000 {
+ compatible = "brcm,bcm2711-rng200";
+ reg = <0x7d208000 0x28>;
+ status = "okay";
+ };
+
+ cpu_l2_irq: intc@7d503000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x7d503000 0x18>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pinctrl: pinctrl@7d504100 {
+ compatible = "brcm,bcm2712-pinctrl";
+ reg = <0x7d504100 0x30>;
+
+ uarta_24_pins: uarta_24_pins {
+ pin_rts {
+ function = "uart0";
+ pins = "gpio24";
+ bias-disable;
+ };
+ pin_cts {
+ function = "uart0";
+ pins = "gpio25";
+ bias-pull-up;
+ };
+ pin_txd {
+ function = "uart0";
+ pins = "gpio26";
+ bias-disable;
+ };
+ pin_rxd {
+ function = "uart0";
+ pins = "gpio27";
+ bias-pull-up;
+ };
+ };
+
+ sdio2_30_pins: sdio2_30_pins {
+ pin_clk {
+ function = "sd2";
+ pins = "gpio30";
+ bias-disable;
+ };
+ pin_cmd {
+ function = "sd2";
+ pins = "gpio31";
+ bias-pull-up;
+ };
+ pins_dat {
+ function = "sd2";
+ pins = "gpio32", "gpio33", "gpio34", "gpio35";
+ bias-pull-up;
+ };
+ };
+ };
+
+ ddc0: i2c@7d508200 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508200 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <1>;
+ clock-frequency = <200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ddc1: i2c@7d508280 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508280 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <2>;
+ clock-frequency = <200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bscd: i2c@7d508300 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508300 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <0>;
+ clock-frequency = <200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bsc_irq: intc@7d508380 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d508380 0x10>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ main_irq: intc@7d508400 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d508400 0x10>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gio: gpio@7d508500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x7d508500 0x40>;
+ interrupt-parent = <&main_irq>;
+ interrupts = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ brcm,gpio-bank-widths = <32 22>;
+ brcm,gpio-direct;
+ };
+
+ uarta: serial@7d50c000 {
+ compatible = "brcm,bcm7271-uart";
+ reg = <0x7d50c000 0x20>;
+ reg-names = "uart";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+ skip-init;
+ status = "disabled";
+ };
+
+ uartb: serial@7d50d000 {
+ compatible = "brcm,bcm7271-uart";
+ reg = <0x7d50d000 0x20>;
+ reg-names = "uart";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+ skip-init;
+ status = "disabled";
+ };
+
+ uartc: serial@7d50e000 {
+ compatible = "brcm,bcm7271-uart";
+ reg = <0x7d50e000 0x20>;
+ reg-names = "uart";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ skip-init;
+ status = "disabled";
+ };
+
+ aon_intr: interrupt-controller@7d510600 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7d510600 0x30>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ status = "disabled";
+ };
+
+ pinctrl_aon: pinctrl@7d510700 {
+ compatible = "brcm,bcm2712-aon-pinctrl";
+ reg = <0x7d510700 0x20>;
+
+ i2c3_m4_agpio0_pins: i2c3_m4_agpio0_pins {
+ function = "vc_i2c3";
+ pins = "aon_gpio0", "aon_gpio1";
+ bias-pull-up;
+ };
+
+ bsc_m1_agpio13_pins: bsc_m1_agpio13_pins {
+ function = "bsc_m1";
+ pins = "aon_gpio13", "aon_gpio14";
+ bias-pull-up;
+ };
+
+ bsc_pmu_sgpio4_pins: bsc_pmu_sgpio4_pins {
+ function = "avs_pmu_bsc";
+ pins = "aon_sgpio4", "aon_sgpio5";
+ };
+
+ bsc_m2_sgpio4_pins: bsc_m2_sgpio4_pins {
+ function = "bsc_m2";
+ pins = "aon_sgpio4", "aon_sgpio5";
+ };
+
+ pwm_aon_agpio1_pins: pwm_aon_agpio1_pins {
+ function = "aon_pwm";
+ pins = "aon_gpio1", "aon_gpio2";
+ };
+
+ pwm_aon_agpio4_pins: pwm_aon_agpio4_pins {
+ function = "vc_pwm0";
+ pins = "aon_gpio4", "aon_gpio5";
+ };
+
+ pwm_aon_agpio7_pins: pwm_aon_agpio7_pins {
+ function = "aon_pwm";
+ pins = "aon_gpio7", "aon_gpio9";
+ };
+ };
+
+ intc@7d517000 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d517000 0x10>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ status = "disabled";
+ };
+
+ bscc: i2c@7d517a00 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d517a00 0x58>;
+ interrupt-parent = <&bsc_aon_irq>;
+ interrupts = <0>;
+ clock-frequency = <200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_aon: pwm@7d517a80 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x7d517a80 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&clk_27MHz>;
+ };
+
+ main_aon_irq: intc@7d517ac0 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d517ac0 0x10>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ bsc_aon_irq: intc@7d517b00 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d517b00 0x10>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gio_aon: gpio@7d517c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x7d517c00 0x40>;
+ interrupt-parent = <&main_aon_irq>;
+ interrupts = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ brcm,gpio-bank-widths = <17 6>;
+ brcm,gpio-direct;
+ };
+
+ avs_monitor: avs-monitor@7d542000 {
+ compatible = "brcm,bcm2711-avs-monitor",
+ "syscon", "simple-mfd";
+ reg = <0x7d542000 0xf00>;
+ status = "okay";
+
+ thermal: thermal {
+ compatible = "brcm,bcm2711-thermal";
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
+ bsc_pmu: i2c@7d544000 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d544000 0x58>;
+ interrupt-parent = <&bsc_aon_irq>;
+ interrupts = <1>;
+ clock-frequency = <200000>;
+ status = "disabled";
+ };
+
+ hdmi0: hdmi@7ef00700 {
+ compatible = "brcm,bcm2712-hdmi0";
+ reg = <0x7c701400 0x300>,
+ <0x7c701000 0x200>,
+ <0x7c701d00 0x300>,
+ <0x7c702000 0x80>,
+ <0x7c703800 0x200>,
+ <0x7c704000 0x800>,
+ <0x7c700100 0x80>,
+ <0x7d510800 0x100>,
+ <0x7c720000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ resets = <&dvp 1>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <1>, <2>, <3>,
+ <7>, <8>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "hpd-connected", "hpd-removed";
+ ddc = <&ddc0>;
+ dmas = <&dma32 10>;
+ dma-names = "audio-rx";
+ status = "disabled";
+ };
+
+ hdmi1: hdmi@7ef05700 {
+ compatible = "brcm,bcm2712-hdmi1";
+ reg = <0x7c706400 0x300>,
+ <0x7c706000 0x200>,
+ <0x7c706d00 0x300>,
+ <0x7c707000 0x80>,
+ <0x7c708800 0x200>,
+ <0x7c709000 0x800>,
+ <0x7c700180 0x80>,
+ <0x7d511000 0x100>,
+ <0x7c720000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ ddc = <&ddc1>;
+ resets = <&dvp 2>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <11>, <12>, <13>,
+ <14>, <15>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "hpd-connected", "hpd-removed";
+ dmas = <&dma32 17>;
+ dma-names = "audio-rx";
+ status = "disabled";
+ };
+
+ sound: sound {
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a76-pmu";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ /* This only applies to the ARMv7 stub */
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x000>;
+ enable-method = "psci";
+ next-level-cache = <&l2_cache>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&l2_cache>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x200>;
+ enable-method = "psci";
+ next-level-cache = <&l2_cache>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x300>;
+ enable-method = "psci";
+ next-level-cache = <&l2_cache>;
+ };
+
+ l2_cache: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&l3_cache>;
+ };
+
+ l3_cache: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ method = "smc";
+ compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+ cpu_on = <0xc4000003>;
+ cpu_suspend = <0xc4000001>;
+ cpu_off = <0x84000002>;
+ };
+
+ axi: axi {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ dma-ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ vc4: gpu {
+ compatible = "brcm,bcm2712-vc6";
+ };
+
+ iommu2: iommu@5100 {
+ /* IOMMU2 for PISP-BE, HEVC; and (unused) H264 accelerators */
+ compatible = "brcm,bcm2712-iommu";
+ reg = <0x10 0x5100 0x0 0x80>;
+ cache = <&iommuc>;
+ #iommu-cells = <0>;
+ };
+
+ iommu4: iommu@5200 {
+ /* IOMMU4 for HVS, MPL/TXP; and (unused) Unicam, PISP-FE, MiniBVN */
+ compatible = "brcm,bcm2712-iommu";
+ reg = <0x10 0x5200 0x0 0x80>;
+ cache = <&iommuc>;
+ #iommu-cells = <0>;
+ #interconnect-cells = <0>;
+ };
+
+ iommu5: iommu@5280 {
+ /* IOMMU5 for PCIe2 (RP1); and (unused) BSTM */
+ compatible = "brcm,bcm2712-iommu";
+ reg = <0x10 0x5280 0x0 0x80>;
+ cache = <&iommuc>;
+ #iommu-cells = <0>;
+ dma-iova-offset = <0x10 0x00000000>; // HACK for RP1 masters over PCIe
+ };
+
+ iommuc: iommuc@5b00 {
+ compatible = "brcm,bcm2712-iommuc";
+ reg = <0x10 0x5b00 0x0 0x80>;
+ };
+
+ dma32: dma@10000 {
+ compatible = "brcm,bcm2712-dma";
+ reg = <0x10 0x00010000 0 0x600>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma0",
+ "dma1",
+ "dma2",
+ "dma3",
+ "dma4",
+ "dma5";
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x0035>;
+ };
+
+ dma40: dma@10600 {
+ compatible = "brcm,bcm2712-dma";
+ reg = <0x10 0x00010600 0 0x600>;
+ interrupts =
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, /* dma4 6 */
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dma4 7 */
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dma4 8 */
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 9 */
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 10 */
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; /* dma4 11 */
+ interrupt-names = "dma6",
+ "dma7",
+ "dma8",
+ "dma9",
+ "dma10",
+ "dma11";
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x0fc0>;
+ };
+
+ // Single-lane Gen3 PCIe
+ // Outbound window at 0x14_000000-0x17_ffffff
+ pcie0: pcie@100000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x10 0x00100000 0x0 0x9310>;
+ device_type = "pci";
+ max-link-speed = <2>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ /*
+ * Unused interrupts:
+ * 208: AER
+ * 215: NMI
+ * 216: PME
+ */
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 210
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 211
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 212
+ IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bcm_reset 5>, <&bcm_reset 42>, <&pcie_rescal>;
+ reset-names = "swinit", "bridge", "rescal";
+ msi-controller;
+ msi-parent = <&pcie0>;
+
+ ranges = <0x02000000 0x00 0x00000000
+ 0x17 0x00000000
+ 0x0 0xfffffffc>,
+ <0x43000000 0x04 0x00000000
+ 0x14 0x00000000
+ 0x3 0x00000000>;
+
+ dma-ranges = <0x43000000 0x10 0x00000000
+ 0x00 0x00000000
+ 0x10 0x00000000>;
+
+ status = "disabled";
+ };
+
+ // Single-lane Gen3 PCIe
+ // Outbound window at 0x18_000000-0x1b_ffffff
+ pcie1: pcie@110000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x10 0x00110000 0x0 0x9310>;
+ device_type = "pci";
+ max-link-speed = <2>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ /*
+ * Unused interrupts:
+ * 218: AER
+ * 225: NMI
+ * 226: PME
+ */
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 220
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 221
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 222
+ IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bcm_reset 7>, <&bcm_reset 43>, <&pcie_rescal>;
+ reset-names = "swinit", "bridge", "rescal";
+ msi-controller;
+ msi-parent = <&mip1>;
+
+ ranges = <0x02000000 0x00 0x00000000
+ 0x1b 0x00000000
+ 0x00 0xfffffffc>,
+ <0x43000000 0x04 0x00000000
+ 0x18 0x00000000
+ 0x03 0x00000000>;
+
+ dma-ranges = <0x03000000 0x10 0x00000000
+ 0x00 0x00000000
+ 0x10 0x00000000>;
+
+ brcm,enable-l1ss;
+ status = "disabled";
+ };
+
+ pcie_rescal: reset-controller@119500 {
+ compatible = "brcm,bcm7216-pcie-sata-rescal";
+ reg = <0x10 0x00119500 0x0 0x10>;
+ #reset-cells = <0>;
+ };
+
+ // Quad-lane Gen3 PCIe
+ // Outbound window at 0x1c_000000-0x1f_ffffff
+ pcie2: pcie@120000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x10 0x00120000 0x0 0x9310>;
+ device_type = "pci";
+ max-link-speed = <2>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ /*
+ * Unused interrupts:
+ * 228: AER
+ * 235: NMI
+ * 236: PME
+ */
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 230
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 231
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 232
+ IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bcm_reset 32>, <&bcm_reset 44>, <&pcie_rescal>;
+ reset-names = "swinit", "bridge", "rescal";
+ msi-controller;
+ msi-parent = <&mip0>;
+
+ // ~4GB, 32-bit, not-prefetchable at PCIe 00_00000000
+ ranges = <0x02000000 0x00 0x00000000
+ 0x1f 0x00000000
+ 0x0 0xfffffffc>,
+ // 12GB, 64-bit, prefetchable at PCIe 04_00000000
+ <0x43000000 0x04 0x00000000
+ 0x1c 0x00000000
+ 0x03 0x00000000>;
+
+ // 64GB system RAM space at PCIe 10_00000000
+ dma-ranges = <0x02000000 0x00 0x00000000
+ 0x1f 0x00000000
+ 0x00 0x00400000>,
+ <0x43000000 0x10 0x00000000
+ 0x00 0x00000000
+ 0x10 0x00000000>;
+
+ brcm,enable-mps-rcb;
+ brcm,enable-l1ss;
+ status = "disabled";
+ };
+
+ mip0: msi-controller@130000 {
+ compatible = "brcm,bcm2712-mip-intc";
+ reg = <0x10 0x00130000 0x0 0xc0>;
+ msi-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ brcm,msi-base-spi = <128>;
+ brcm,msi-num-spis = <64>;
+ brcm,msi-offset = <0>;
+ brcm,msi-pci-addr = <0xff 0xfffff000>;
+ };
+
+ mip1: msi-controller@131000 {
+ compatible = "brcm,bcm2712-mip-intc";
+ reg = <0x10 0x00131000 0x0 0xc0>;
+ msi-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ brcm,msi-base-spi = <247>;
+ /* Actually 20 total, but the others are
+ * both sparse and non-consecutive */
+ brcm,msi-num-spis = <8>;
+ brcm,msi-offset = <8>;
+ brcm,msi-pci-addr = <0xff 0xffffe000>;
+ };
+
+ genet: ethernet@1300000 {
+ compatible = "brcm,bcm2711-genet-v5";
+ reg = <0x10 0x01300000 0x0 0x20010>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ phy-mode = "rgmii";
+ fixed-link = <0x0 0x1 0x3e8 0x0 0x0>;
+ phy-speed = <0x3e8>;
+ phy-id = <0x101>;
+ phy-type = <0x6>;
+ local-mac-address = [ 00 10 18 d8 45 de ];
+ device_type = "network";
+
+ genet_mdio: mdio@e14 {
+ compatible = "brcm,genet-mdio-v5";
+ reg = <0xe14 0x8>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+ };
+
+ syscon_piarbctl: syscon@400018 {
+ compatible = "brcm,syscon-piarbctl", "syscon", "simple-mfd";
+ reg = <0x10 0x00400018 0x0 0x18>;
+ };
+
+ rpivid: codec@800000 {
+ compatible = "raspberrypi,rpivid-vid-decoder";
+ reg = <0x10 0x00800000 0x0 0x10000>, /* HEVC */
+ <0x10 0x00840000 0x0 0x1000>; /* INTC */
+ reg-names = "hevc",
+ "intc";
+
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&firmware_clocks 11>;
+ clock-names = "hevc";
+ status = "disabled";
+ };
+
+ sdio1: mmc@fff000 {
+ compatible = "brcm,bcm2712-sdhci";
+ reg = <0x10 0x00fff000 0x0 0x260>,
+ <0x10 0x00fff400 0x0 0x200>,
+ <0x10 0x015040b0 0x0 0x4>, // Bus isolation control
+ <0x10 0x015200f0 0x0 0x24>; // LCPLL control misc0-8
+ reg-names = "host", "cfg", "busisol", "lcpll";
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_emmc2>;
+ sdhci-caps-mask = <0x0000C000 0x0>;
+ sdhci-caps = <0x0 0x0>;
+ supports-cqe;
+ mmc-ddr-3_3v;
+ };
+
+ sdio2: mmc@1100000 {
+ compatible = "brcm,bcm2712-sdhci";
+ reg = <0x10 0x01100000 0x0 0x260>,
+ <0x10 0x01100400 0x0 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_emmc2>;
+ sdhci-caps-mask = <0x0000C000 0x0>;
+ sdhci-caps = <0x0 0x0>;
+ supports-cqe;
+ mmc-ddr-3_3v;
+ status = "disabled";
+ };
+
+ sdio0: mmc@1108000 {
+ compatible = "brcm,bcm2711-emmc2";
+ reg = <0x10 0x01108000 0x0 0x100>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_emmc2>;
+ mmc-ddr-3_3v;
+ status = "disabled";
+ };
+
+ bcm_reset: reset-controller@1504318 {
+ compatible = "brcm,brcmstb-reset";
+ reg = <0x10 0x01504318 0x0 0x30>;
+ #reset-cells = <1>;
+ };
+
+ v3d: v3d@2000000 {
+ compatible = "brcm,2712-v3d";
+ reg = <0x10 0x02000000 0x0 0x4000>,
+ <0x10 0x02008000 0x0 0x6000>;
+ reg-names = "hub", "core0";
+
+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+ resets = <&pm BCM2835_RESET_V3D>;
+ clocks = <&firmware_clocks 5>;
+ clocks-names = "v3d";
+ interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gicv2: interrupt-controller@7fff9000 {
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "arm,gic-400";
+ reg = <0x10 0x7fff9000 0x0 0x1000>,
+ <0x10 0x7fffa000 0x0 0x2000>,
+ <0x10 0x7fffc000 0x0 0x2000>,
+ <0x10 0x7fffe000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pisp_be: pisp_be@880000 {
+ compatible = "raspberrypi,pispbe";
+ reg = <0x10 0x00880000 0x0 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&firmware_clocks 7>;
+ clocks-names = "isp_be";
+ status = "okay";
+ iommus = <&iommu2>;
+ };
+ };
+
+ clocks {
+ /* The oscillator is the root of the clock tree. */
+ clk_osc: clk-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <54000000>;
+ };
+
+ clk_usb: clk-usb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "otg";
+ clock-frequency = <480000000>;
+ };
+
+ clk_vpu: clk_vpu {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <750000000>;
+ clock-output-names = "vpu-clock";
+ };
+
+ clk_uart: clk_uart {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <9216000>;
+ clock-output-names = "uart-clock";
+ };
+
+ clk_emmc2: clk_emmc2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <54000000>;
+ clock-output-names = "emmc2-clock";
+ };
+ };
+
+ usbphy: phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -49,8 +49,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
dionaudio-loco.dtbo \
dionaudio-loco-v2.dtbo \
disable-bt.dtbo \
+ disable-bt-pi5.dtbo \
disable-emmc2.dtbo \
disable-wifi.dtbo \
+ disable-wifi-pi5.dtbo \
dpi18.dtbo \
dpi18cpadhi.dtbo \
dpi24.dtbo \
@@ -106,8 +108,12 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
i2c-rtc-gpio.dtbo \
i2c-sensor.dtbo \
i2c0.dtbo \
+ i2c0-pi5.dtbo \
i2c1.dtbo \
+ i2c1-pi5.dtbo \
+ i2c2-pi5.dtbo \
i2c3.dtbo \
+ i2c3-pi5.dtbo \
i2c4.dtbo \
i2c5.dtbo \
i2c6.dtbo \
@@ -150,10 +156,15 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
media-center.dtbo \
merus-amp.dtbo \
midi-uart0.dtbo \
+ midi-uart0-pi5.dtbo \
midi-uart1.dtbo \
+ midi-uart1-pi5.dtbo \
midi-uart2.dtbo \
+ midi-uart2-pi5.dtbo \
midi-uart3.dtbo \
+ midi-uart3-pi5.dtbo \
midi-uart4.dtbo \
+ midi-uart4-pi5.dtbo \
midi-uart5.dtbo \
minipitft13.dtbo \
miniuart-bt.dtbo \
@@ -231,14 +242,20 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
spi1-2cs.dtbo \
spi1-3cs.dtbo \
spi2-1cs.dtbo \
+ spi2-1cs-pi5.dtbo \
spi2-2cs.dtbo \
+ spi2-2cs-pi5.dtbo \
spi2-3cs.dtbo \
spi3-1cs.dtbo \
+ spi3-1cs-pi5.dtbo \
spi3-2cs.dtbo \
+ spi3-2cs-pi5.dtbo \
spi4-1cs.dtbo \
spi4-2cs.dtbo \
spi5-1cs.dtbo \
+ spi5-1cs-pi5.dtbo \
spi5-2cs.dtbo \
+ spi5-2cs-pi5.dtbo \
spi6-1cs.dtbo \
spi6-2cs.dtbo \
ssd1306.dtbo \
@@ -253,10 +270,15 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
tpm-slb9670.dtbo \
tpm-slb9673.dtbo \
uart0.dtbo \
+ uart0-pi5.dtbo \
uart1.dtbo \
+ uart1-pi5.dtbo \
uart2.dtbo \
+ uart2-pi5.dtbo \
uart3.dtbo \
+ uart3-pi5.dtbo \
uart4.dtbo \
+ uart4-pi5.dtbo \
uart5.dtbo \
udrc.dtbo \
ugreen-dabboard.dtbo \
@@ -276,6 +298,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
vc4-kms-kippah-7inch.dtbo \
vc4-kms-v3d.dtbo \
vc4-kms-v3d-pi4.dtbo \
+ vc4-kms-v3d-pi5.dtbo \
vc4-kms-vga666.dtbo \
vga666.dtbo \
vl805.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -151,6 +151,9 @@ Params:
bdaddr=06:05:04:03:02:01
will set the BDADDR to 01:02:03:04:05:06.
+ button_debounce Set the debounce delay (in ms) on the power/
+ shutdown button (default 50ms)
+
cam0_reg Enables CAM 0 regulator.
Only required on CM1 & 3.
@@ -167,6 +170,9 @@ Params:
Default of GPIO expander 5 on CM4, but override
switches to normal GPIO.
+ cooling_fan Enables the Pi 5 cooling fan (enabled
+ automatically by the firmware)
+
eee Enable Energy Efficient Ethernet support for
compatible devices (default "on"). See also
"tx_lpi_timer". Pi3B+ only.
@@ -206,23 +212,29 @@ Params:
hdmi Set to "off" to disable the HDMI interface
(default "on")
+ i2c An alias for i2c_arm
+
i2c_arm Set to "on" to enable the ARM's i2c interface
(default "off")
+ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface
+ (default "100000")
+
+ i2c_baudrate An alias for i2c_arm_baudrate
+
+ i2c_csi_dsi Set to "on" to enable the i2c_csi_dsi interface
+
+ i2c_csi_dsi0 Set to "on" to enable the i2c_csi_dsi0 interface
+
+ i2c_csi_dsi1 Set to "on" to enable the i2c_csi_dsi1 interface
+
i2c_vc Set to "on" to enable the i2c interface
usually reserved for the VideoCore processor
(default "off")
- i2c An alias for i2c_arm
-
- i2c_arm_baudrate Set the baudrate of the ARM's i2c interface
- (default "100000")
-
i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface
(default "100000")
- i2c_baudrate An alias for i2c_arm_baudrate
-
i2s Set to "on" to enable the i2s interface
(default "off")
@@ -237,11 +249,23 @@ Params:
krnbt_baudrate Set the baudrate of the PL011 UART when used
with krnbt=on
+ nvme Alias for "pciex1" (2712 only)
+
pcie Set to "off" to disable the PCIe interface
(default "on")
(2711 only, but not applicable on CM4S)
N.B. USB-A ports on 4B are subsequently disabled
+ pciex1 Set to "on" to enable the external PCIe link
+ (2712 only, default "off")
+
+ pciex1_gen Sets the PCIe "GEN"/speed for the external PCIe
+ link (2712 only, default "2")
+
+ pciex1_no_l0s Set to "on" to disable ASPM L0s on the external
+ PCIe link for devices that have broken
+ implementations (2712 only, default "off")
+
spi Set to "on" to enable the spi interfaces
(default "off")
@@ -252,6 +276,11 @@ Params:
random Set to "on" to enable the hardware random
number generator (default "on")
+ rtc_bbat_vchg Set the RTC backup battery charging voltage in
+ microvolts. If set to 0 or not specified, the
+ trickle charger is disabled.
+ (2712 only, default "0")
+
sd Set to "off" to disable the SD card (or eMMC on
non-lite SKU of CM4).
(default "on")
@@ -276,18 +305,30 @@ Params:
sdio_overclock Clock (in MHz) to use when the MMC framework
requests 50MHz for the SDIO/WLAN interface.
+ suspend Make the power button trigger a suspend rather
+ than a power-off (2712 only, default "off")
+
tx_lpi_timer Set the delay in microseconds between going idle
and entering the low power state (default 600).
Requires EEE to be enabled - see "eee".
uart0 Set to "off" to disable uart0 (default "on")
+ uart0_console Move the kernel boot console to UART0 on pins
+ 6, 8 and 10 of the 40-way header (2712 only,
+ default "off")
+
uart1 Set to "on" or "off" to enable or disable uart1
(default varies)
watchdog Set to "on" to enable the hardware watchdog
(default "off")
+ wifiaddr Set an alternative WiFi MAC address.
+ The value should be a 6-byte hexadecimal value,
+ with or without colon separators, written in the
+ natural (big-endian) order.
+
act_led_trigger Choose which activity the LED tracks.
Use "heartbeat" for a nice load indicator.
(default "mmc")
@@ -919,14 +960,16 @@ Params: 24db_digital_gain Allow ga
Name: disable-bt
-Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring
- UART0/ttyAMA0 over GPIOs 14 & 15.
- N.B. To disable the systemd service that initialises the modem so it
- doesn't use the UART, use 'sudo systemctl disable hciuart'.
+Info: Disable onboard Bluetooth on Bluetooth-capable Raspberry Pis. On Pis
+ prior to Pi 5 this restores UART0/ttyAMA0 over GPIOs 14 & 15.
Load: dtoverlay=disable-bt
Params: <None>
+Name: disable-bt-pi5
+Info: See disable-bt
+
+
Name: disable-emmc2
Info: Disable EMMC2 controller on BCM2711.
The allows the onboard EMMC storage on Compute Module 4 to be disabled
@@ -936,11 +979,15 @@ Params: <None>
Name: disable-wifi
-Info: Disable onboard WLAN on Pi 3B, 3B+, 3A+, 4B and Zero W.
+Info: Disable onboard WLAN on WiFi-capable Raspberry Pis.
Load: dtoverlay=disable-wifi
Params: <None>
+Name: disable-wifi-pi5
+Info: See disable-wifi
+
+
Name: dpi18
Info: Overlay for a generic 18-bit DPI display
This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output
@@ -2233,6 +2280,15 @@ Info: Deprecated, legacy version of i2
Load: <Deprecated>
+Name: i2c0-pi5
+Info: Enable i2c0 (Pi 5 only)
+Load: dtoverlay=i2c0-pi5,<param>=<val>
+Params: pins_0_1 Use GPIOs 0 and 1 (default)
+ pins_8_9 Use GPIOs 8 and 9
+ baudrate Set the baudrate for the interface (default
+ "100000")
+
+
Name: i2c1
Info: Change i2c1 pin usage. Not all pin combinations are usable on all
platforms - platforms other then Compute Modules can only use this
@@ -2249,6 +2305,24 @@ Info: Deprecated, legacy version of i2
Load: <Deprecated>
+Name: i2c1-pi5
+Info: Enable i2c1 (Pi 5 only)
+Load: dtoverlay=i2c1-pi5,<param>=<val>
+Params: pins_2_3 Use GPIOs 2 and 3 (default)
+ pins_10_11 Use GPIOs 10 and 11
+ baudrate Set the baudrate for the interface (default
+ "100000")
+
+
+Name: i2c2-pi5
+Info: Enable i2c2 (Pi 5 only)
+Load: dtoverlay=i2c2-pi5,<param>=<val>
+Params: pins_4_5 Use GPIOs 4 and 5 (default)
+ pins_12_13 Use GPIOs 12 and 13
+ baudrate Set the baudrate for the interface (default
+ "100000")
+
+
Name: i2c3
Info: Enable the i2c3 bus. BCM2711 only.
Load: dtoverlay=i2c3,<param>
@@ -2258,6 +2332,16 @@ Params: pins_2_3 Use GPIO
"100000")
+Name: i2c3-pi5
+Info: Enable i2c3 (Pi 5 only)
+Load: dtoverlay=i2c3-pi5,<param>=<val>
+Params: pins_6_7 Use GPIOs 6 and 7 (default)
+ pins_14_15 Use GPIOs 14 and 15
+ pins_22_23 Use GPIOs 22 and 23
+ baudrate Set the baudrate for the interface (default
+ "100000")
+
+
Name: i2c4
Info: Enable the i2c4 bus. BCM2711 only.
Load: dtoverlay=i2c4,<param>
@@ -2869,6 +2953,10 @@ Load: dtoverlay=midi-uart0
Params: <None>
+Name: midi-uart0-pi5
+Info: See midi-uart0 (this is the Pi 5 version)
+
+
Name: midi-uart1
Info: Configures UART1 (ttyS0) so that a requested 38.4kbaud actually gets
31.25kbaud, the frequency required for MIDI
@@ -2876,29 +2964,45 @@ Load: dtoverlay=midi-uart1
Params: <None>
+Name: midi-uart1-pi5
+Info: See midi-uart1 (this is the Pi 5 version)
+
+
Name: midi-uart2
-Info: Configures UART2 (ttyAMA1) so that a requested 38.4kbaud actually gets
+Info: Configures UART2 (ttyAMA2) so that a requested 38.4kbaud actually gets
31.25kbaud, the frequency required for MIDI
Load: dtoverlay=midi-uart2
Params: <None>
+Name: midi-uart2-pi5
+Info: See midi-uart2 (this is the Pi 5 version)
+
+
Name: midi-uart3
-Info: Configures UART3 (ttyAMA2) so that a requested 38.4kbaud actually gets
+Info: Configures UART3 (ttyAMA3) so that a requested 38.4kbaud actually gets
31.25kbaud, the frequency required for MIDI
Load: dtoverlay=midi-uart3
Params: <None>
+Name: midi-uart3-pi5
+Info: See midi-uart3 (this is the Pi 5 version)
+
+
Name: midi-uart4
-Info: Configures UART4 (ttyAMA3) so that a requested 38.4kbaud actually gets
+Info: Configures UART4 (ttyAMA4) so that a requested 38.4kbaud actually gets
31.25kbaud, the frequency required for MIDI
Load: dtoverlay=midi-uart4
Params: <None>
+Name: midi-uart4-pi5
+Info: See midi-uart4 (this is the Pi 5 version)
+
+
Name: midi-uart5
-Info: Configures UART5 (ttyAMA4) so that a requested 38.4kbaud actually gets
+Info: Configures UART5 (ttyAMA5) so that a requested 38.4kbaud actually gets
31.25kbaud, the frequency required for MIDI
Load: dtoverlay=midi-uart5
Params: <None>
@@ -3921,105 +4025,131 @@ Name: spi1-1cs
Info: Enables spi1 with a single chip select (CS) line and associated spidev
dev node. The gpio pin number for the CS line and spidev device node
creation are configurable.
- N.B.: spi1 is only accessible on devices with a 40pin header, eg:
- A+, B+, Zero and PI2 B; as well as the Compute Module.
+ N.B.: spi1 is not accessible on old Pis without a 40-pin header.
Load: dtoverlay=spi1-1cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
- cs0_spidev Set to 'disabled' to stop the creation of a
+ cs0_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev1.0 (default
- is 'okay' or enabled).
+ is 'on' or enabled).
Name: spi1-2cs
Info: Enables spi1 with two chip select (CS) lines and associated spidev
dev nodes. The gpio pin numbers for the CS lines and spidev device node
creation are configurable.
- N.B.: spi1 is only accessible on devices with a 40pin header, eg:
- A+, B+, Zero and PI2 B; as well as the Compute Module.
+ N.B.: spi1 is not accessible on old Pis without a 40-pin header.
Load: dtoverlay=spi1-2cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
- cs0_spidev Set to 'disabled' to stop the creation of a
+ cs0_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev1.0 (default
- is 'okay' or enabled).
- cs1_spidev Set to 'disabled' to stop the creation of a
+ is 'on' or enabled).
+ cs1_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev1.1 (default
- is 'okay' or enabled).
+ is 'on' or enabled).
Name: spi1-3cs
Info: Enables spi1 with three chip select (CS) lines and associated spidev
dev nodes. The gpio pin numbers for the CS lines and spidev device node
creation are configurable.
- N.B.: spi1 is only accessible on devices with a 40pin header, eg:
- A+, B+, Zero and PI2 B; as well as the Compute Module.
+ N.B.: spi1 is not accessible on old Pis without a 40-pin header.
Load: dtoverlay=spi1-3cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2).
- cs0_spidev Set to 'disabled' to stop the creation of a
+ cs0_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev1.0 (default
- is 'okay' or enabled).
- cs1_spidev Set to 'disabled' to stop the creation of a
+ is 'on' or enabled).
+ cs1_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev1.1 (default
- is 'okay' or enabled).
- cs2_spidev Set to 'disabled' to stop the creation of a
+ is 'on' or enabled).
+ cs2_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev1.2 (default
- is 'okay' or enabled).
+ is 'on' or enabled).
Name: spi2-1cs
-Info: Enables spi2 with a single chip select (CS) line and associated spidev
- dev node. The gpio pin number for the CS line and spidev device node
- creation are configurable.
- N.B.: spi2 is only accessible with the Compute Module.
+Info: Enables spi2 on GPIOs 40-42 with a single chip select (CS) line and
+ associated spidev dev node. The gpio pin number for the CS line and
+ spidev device node creation are configurable. spi2-2cs-pi5 is
+ substituted on a Pi 5.
+ N.B.: spi2 is only accessible with the Compute Module or Pi 5.
Load: dtoverlay=spi2-1cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
- cs0_spidev Set to 'disabled' to stop the creation of a
+ cs0_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev2.0 (default
- is 'okay' or enabled).
+ is 'on' or enabled).
+
+
+Name: spi2-1cs-pi5
+Info: Enables spi2 on GPIOs 1-3 with a single chip select (CS) line and
+ associated spidev dev node. The gpio pin number for the CS line and
+ spidev device node creation are configurable. Pi 5 only.
+Load: dtoverlay=spi2-1cs-pi5,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 0).
+ cs0_spidev Set to 'off' to stop the creation of a
+ userspace device node /dev/spidev2.0 (default
+ is 'on' or enabled).
Name: spi2-2cs
-Info: Enables spi2 with two chip select (CS) lines and associated spidev
- dev nodes. The gpio pin numbers for the CS lines and spidev device node
- creation are configurable.
- N.B.: spi2 is only accessible with the Compute Module.
+Info: Enables spi2 on GPIOs 40-42 with two chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. spi2-2cs-pi5 is
+ substituted on a Pi 5.
+ N.B.: spi2 is only accessible with the Compute Module or Pi 5.
Load: dtoverlay=spi2-2cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
- cs0_spidev Set to 'disabled' to stop the creation of a
+ cs0_spidev Set to 'off' to stop the creation of a
+ userspace device node /dev/spidev2.0 (default
+ is 'on' or enabled).
+ cs1_spidev Set to 'off' to stop the creation of a
+ userspace device node /dev/spidev2.1 (default
+ is 'on' or enabled).
+
+
+Name: spi2-2cs-pi5
+Info: Enables spi2 on GPIOs 1-3 with two chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. Pi 5 only.
+Load: dtoverlay=spi2-2cs-pi5,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 0).
+ cs1_pin GPIO pin for CS1 (default 24).
+ cs0_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev2.0 (default
- is 'okay' or enabled).
- cs1_spidev Set to 'disabled' to stop the creation of a
+ is 'on' or enabled).
+ cs1_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev2.1 (default
- is 'okay' or enabled).
+ is 'on' or enabled).
Name: spi2-3cs
-Info: Enables spi2 with three chip select (CS) lines and associated spidev
- dev nodes. The gpio pin numbers for the CS lines and spidev device node
- creation are configurable.
- N.B.: spi2 is only accessible with the Compute Module.
+Info: Enables spi2 on GPIOs 40-42 with three chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable.
+ N.B.: spi2 is only accessible with the Compute Module or Pi 5.
Load: dtoverlay=spi2-3cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2).
- cs0_spidev Set to 'disabled' to stop the creation of a
+ cs0_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev2.0 (default
- is 'okay' or enabled).
- cs1_spidev Set to 'disabled' to stop the creation of a
+ is 'on' or enabled).
+ cs1_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev2.1 (default
- is 'okay' or enabled).
- cs2_spidev Set to 'disabled' to stop the creation of a
+ is 'on' or enabled).
+ cs2_spidev Set to 'off' to stop the creation of a
userspace device node /dev/spidev2.2 (default
- is 'okay' or enabled).
+ is 'on' or enabled).
Name: spi3-1cs
-Info: Enables spi3 with a single chip select (CS) line and associated spidev
- dev node. The gpio pin number for the CS line and spidev device node
- creation are configurable. BCM2711 only.
+Info: Enables spi3 on GPIOs 1-3 with a single chip select (CS) line and
+ associated spidev dev node. The gpio pin number for the CS line and
+ spidev device node creation are configurable. BCM2711 only,
+ spi3-1cs-pi5 is substituted on Pi 5.
Load: dtoverlay=spi3-1cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0).
cs0_spidev Set to 'off' to prevent the creation of a
@@ -4027,10 +4157,22 @@ Params: cs0_pin GPIO pin
is 'on' or enabled).
+Name: spi3-1cs-pi5
+Info: Enables spi3 on GPIOs 5-7 with a single chip select (CS) line and
+ associated spidev dev node. The gpio pin number for the CS line and
+ spidev device node creation are configurable. Pi 5 only.
+Load: dtoverlay=spi3-1cs-pi5,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 4).
+ cs0_spidev Set to 'off' to prevent the creation of a
+ userspace device node /dev/spidev3.0 (default
+ is 'on' or enabled).
+
+
Name: spi3-2cs
-Info: Enables spi3 with two chip select (CS) lines and associated spidev
- dev nodes. The gpio pin numbers for the CS lines and spidev device node
- creation are configurable. BCM2711 only.
+Info: Enables spi3 on GPIO2 1-3 with two chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. BCM2711 only,
+ spi3-2cs-pi5 is substituted on Pi 5.
Load: dtoverlay=spi3-2cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0).
cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1).
@@ -4042,10 +4184,25 @@ Params: cs0_pin GPIO pin
is 'on' or enabled).
+Name: spi3-2cs-pi5
+Info: Enables spi3 on GPIOs 5-7 with two chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. Pi 5 only.
+Load: dtoverlay=spi3-2cs-pi5,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 4).
+ cs1_pin GPIO pin for CS1 (default 25).
+ cs0_spidev Set to 'off' to prevent the creation of a
+ userspace device node /dev/spidev3.0 (default
+ is 'on' or enabled).
+ cs1_spidev Set to 'off' to prevent the creation of a
+ userspace device node /dev/spidev3.1 (default
+ is 'on' or enabled).
+
+
Name: spi4-1cs
-Info: Enables spi4 with a single chip select (CS) line and associated spidev
- dev node. The gpio pin number for the CS line and spidev device node
- creation are configurable. BCM2711 only.
+Info: Enables spi4 on GPIOs 5-7 with a single chip select (CS) line and
+ associated spidev dev node. The gpio pin number for the CS line and
+ spidev device node creation are configurable. BCM2711 only.
Load: dtoverlay=spi4-1cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0).
cs0_spidev Set to 'off' to prevent the creation of a
@@ -4054,9 +4211,9 @@ Params: cs0_pin GPIO pin
Name: spi4-2cs
-Info: Enables spi4 with two chip select (CS) lines and associated spidev
- dev nodes. The gpio pin numbers for the CS lines and spidev device node
- creation are configurable. BCM2711 only.
+Info: Enables spi4 on GPIOs 5-6 with two chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. BCM2711 only.
Load: dtoverlay=spi4-2cs,<param>=<val>
Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0).
cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1).
@@ -4069,23 +4226,27 @@ Params: cs0_pin GPIO pin
Name: spi5-1cs
-Info: Enables spi5 with a single chip select (CS) line and associated spidev
- dev node. The gpio pin numbers for the CS lines and spidev device node
- creation are configurable. BCM2711 only.
+Info: Enables spi5 on GPIOs 13-15 with a single chip select (CS) line and
+ associated spidev dev node. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. BCM2711 and Pi 5.
Load: dtoverlay=spi5-1cs,<param>=<val>
-Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0).
+Params: cs0_pin GPIO pin for CS0 (default 12).
cs0_spidev Set to 'off' to prevent the creation of a
userspace device node /dev/spidev5.0 (default
is 'on' or enabled).
+Name: spi5-1cs-pi5
+Info: See spi5-1cs
+
+
Name: spi5-2cs
-Info: Enables spi5 with two chip select (CS) lines and associated spidev
- dev nodes. The gpio pin numbers for the CS lines and spidev device node
- creation are configurable. BCM2711 only.
+Info: Enables spi5 on GPIOs 13-15 with two chip select (CS) lines and
+ associated spidev dev nodes. The gpio pin numbers for the CS lines and
+ spidev device node creation are configurable. BCM2711 and Pi 5.
Load: dtoverlay=spi5-2cs,<param>=<val>
-Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0).
- cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1).
+Params: cs0_pin GPIO pin for CS0 (default 12).
+ cs1_pin GPIO pin for CS1 (default 26).
cs0_spidev Set to 'off' to prevent the creation of a
userspace device node /dev/spidev5.0 (default
is 'on' or enabled).
@@ -4094,6 +4255,10 @@ Params: cs0_pin GPIO pin
is 'on' or enabled).
+Name: spi5-2cs-pi5
+Info: See spi5-2cs
+
+
Name: spi6-1cs
Info: Enables spi6 with a single chip select (CS) line and associated spidev
dev node. The gpio pin number for the CS line and spidev device node
@@ -4296,6 +4461,12 @@ Params: txd0_pin GPIO pin
7(Alt3) for 32&33, 6(Alt2) for 36&37
+Name: uart0-pi5
+Info: Enable uart 0 on GPIOs 14-15. Pi 5 only.
+Load: dtoverlay=uart0-pi5,<param>
+Params: ctsrts Enable CTS/RTS on GPIOs 16-17 (default off)
+
+
Name: uart1
Info: Change the pin usage of uart1
Load: dtoverlay=uart1,<param>=<val>
@@ -4304,24 +4475,48 @@ Params: txd1_pin GPIO pin
rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15)
+Name: uart1-pi5
+Info: Enable uart 1 on GPIOs 0-1. Pi 5 only.
+Load: dtoverlay=uart1-pi5,<param>
+Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off)
+
+
Name: uart2
Info: Enable uart 2 on GPIOs 0-3. BCM2711 only.
Load: dtoverlay=uart2,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off)
+Name: uart2-pi5
+Info: Enable uart 2 on GPIOs 4-5. Pi 5 only.
+Load: dtoverlay=uart2-pi5,<param>
+Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off)
+
+
Name: uart3
Info: Enable uart 3 on GPIOs 4-7. BCM2711 only.
Load: dtoverlay=uart3,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off)
+Name: uart3-pi5
+Info: Enable uart 3 on GPIOs 8-9. Pi 5 only.
+Load: dtoverlay=uart3-pi5,<param>
+Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off)
+
+
Name: uart4
Info: Enable uart 4 on GPIOs 8-11. BCM2711 only.
Load: dtoverlay=uart4,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off)
+Name: uart4-pi5
+Info: Enable uart 4 on GPIOs 12-13. Pi 5 only.
+Load: dtoverlay=uart4-pi5,<param>
+Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off)
+
+
Name: uart5
Info: Enable uart 5 on GPIOs 12-15. BCM2711 only.
Load: dtoverlay=uart5,<param>
@@ -4530,6 +4725,8 @@ Params: sizex Touchscr
invy Touchscreen inverted y axis
swapxy Touchscreen swapped x y axis
disable_touch Disables the touch screen overlay driver
+ dsi0 Use DSI0 and i2c_csi_dsi0 (rather than
+ the default DSI1 and i2c_csi_dsi).
Name: vc4-kms-dsi-lt070me05000
@@ -4579,6 +4776,8 @@ Params: 2_8_inch 2.8" 480
invx Touchscreen inverted x axis
invy Touchscreen inverted y axis
swapxy Touchscreen swapped x y axis
+ dsi0 Use DSI0 and i2c_csi_dsi0 (rather than
+ the default DSI1 and i2c_csi_dsi).
Name: vc4-kms-kippah-7inch
@@ -4633,6 +4832,9 @@ Params: cma-512 CMA is 5
nohdmi1 Disable HDMI 1 output
+Name: vc4-kms-v3d-pi5
+Info: See vc4-kms-v3d-pi4 (this is the Pi 5 version)
+
Name: vc4-kms-vga666
Info: Enable the VGA666 (resistor ladder ADC) for the vc4-kms-v3d driver.
--- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts
@@ -23,7 +23,7 @@
};
fragment@1 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -33,7 +33,7 @@
target = <&sound>;
__overlay__ {
compatible = "adi,adau1977-adc";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts
+++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts
@@ -5,7 +5,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -37,7 +37,7 @@
"PDM_DAT", "Microphone Jack";
status = "okay";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
dailink0_slave: simple-audio-card,codec {
sound-dai = <&adau7002_codec>;
--- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts
+++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -38,7 +38,7 @@
card_name = "Akkordion";
dai_name = "IQaudIO DAC";
dai_stream_name = "IQaudIO DAC HiFi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts
@@ -18,8 +18,8 @@
};
};
- fragment@1 {
- target = <&i2s>;
+ frag1: fragment@1 {
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -46,7 +46,7 @@
target = <&sound>;
boss_dac: __overlay__ {
compatible = "allo,boss-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
mute-gpios = <&gpio 6 1>;
status = "okay";
};
@@ -54,6 +54,8 @@
__overrides__ {
24db_digital_gain = <&boss_dac>,"allo,24db_digital_gain?";
- slave = <&boss_dac>,"allo,slave?";
+ slave = <&boss_dac>,"allo,slave?",
+ <&frag1>,"target:0=",<&i2s_clk_producer>,
+ <&boss_dac>,"i2s-controller:0=",<&i2s_clk_producer>;
};
};
--- a/arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts
@@ -8,7 +8,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
--- a/arch/arm/boot/dts/overlays/allo-digione-overlay.dts
+++ b/arch/arm/boot/dts/overlays/allo-digione-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -35,7 +35,7 @@
target = <&sound>;
__overlay__ {
compatible = "allo,allo-digione";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
clock44-gpio = <&gpio 5 0>;
clock48-gpio = <&gpio 6 0>;
--- a/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts
@@ -9,7 +9,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
--- a/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts
@@ -16,7 +16,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -42,7 +42,7 @@
target = <&sound>;
piano_dac: __overlay__ {
compatible = "allo,piano-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -41,7 +41,7 @@
piano_dac: __overlay__ {
compatible = "allo,piano-dac-plus";
audio-codec = <&allo_pcm5122_4c &allo_pcm5122_4d>;
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
mute1-gpios = <&gpio 6 1>;
mute2-gpios = <&gpio 25 1>;
status = "okay";
--- a/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts
@@ -16,7 +16,7 @@
format = "i2s";
p_cpu_dai: cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
@@ -40,7 +40,7 @@
};
fragment@2 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
--- a/arch/arm/boot/dts/overlays/arducam-64mp-overlay.dts
+++ b/arch/arm/boot/dts/overlays/arducam-64mp-overlay.dts
@@ -67,7 +67,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/arducam-pivariety-overlay.dts
+++ b/arch/arm/boot/dts/overlays/arducam-pivariety-overlay.dts
@@ -85,7 +85,7 @@
rotation = <&arducam_pivariety>,"rotation:0";
orientation = <&arducam_pivariety>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&arducam_pivariety>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -48,7 +48,7 @@
mult-gpios = <&gpio 27 0>, <&gpio 22 0>, <&gpio 23 0>,
<&gpio 24 0>;
reset-gpios = <&gpio 5 0>;
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
codec = <&cs42448>;
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/audioinjector-bare-i2s-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audioinjector-bare-i2s-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -27,7 +27,7 @@
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
simple-audio-card,name = "audioinjector-bare";
@@ -37,7 +37,7 @@
simple-audio-card,frame-master = <&dailink0_master>;
dailink0_master: simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
--- a/arch/arm/boot/dts/overlays/audioinjector-isolated-soundcard-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audioinjector-isolated-soundcard-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -47,7 +47,7 @@
snd: __overlay__ {
compatible = "ai,audioinjector-isolated-soundcard";
mute-gpios = <&gpio 17 0>;
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
codec = <&cs4272>;
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -33,7 +33,7 @@
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
simple-audio-card,name = "audioinjector-ultra";
@@ -57,7 +57,7 @@
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_consumer>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
--- a/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "ai,audioinjector-pi-soundcard";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts
@@ -8,7 +8,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -75,7 +75,7 @@
target = <&sound>;
__overlay__ {
compatible = "as,audiosense-pi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/chipdip-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/chipdip-dac-overlay.dts
@@ -9,7 +9,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "chipdip,chipdip-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
sr0-gpios = <&gpio 5 0>;
sr1-gpios = <&gpio 6 0>;
sr2-gpios = <&gpio 12 0>;
--- a/arch/arm/boot/dts/overlays/cirrus-wm5102-overlay.dts
+++ b/arch/arm/boot/dts/overlays/cirrus-wm5102-overlay.dts
@@ -9,7 +9,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -165,7 +165,7 @@
target = <&sound>;
__overlay__ {
compatible = "wlf,rpi-cirrus";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/dacberry400-overlay.dts
+++ b/arch/arm/boot/dts/overlays/dacberry400-overlay.dts
@@ -5,7 +5,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -62,7 +62,7 @@
target = <&sound>;
__overlay__ {
compatible = "osaelectronics,dacberry400";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/dionaudio-kiwi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/dionaudio-kiwi-overlay.dts
@@ -11,7 +11,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "dionaudio,dionaudio-kiwi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts
+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts
@@ -11,7 +11,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "dionaudio,loco-pcm5242-tpa3118";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts
+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts
@@ -15,13 +15,13 @@
target = <&sound>;
frag0: __overlay__ {
compatible = "dionaudio,dionaudio-loco-v2";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
fragment@1 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/disable-bt-pi5-overlay.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/plugin/;
+
+/* Disable Bluetooth */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&bluetooth>;
+ __overlay__ {
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/disable-wifi-pi5-overlay.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&sdio2>;
+ __overlay__ {
+ status = "disabled";
+ };
+ };
+};
--- a/arch/arm/boot/dts/overlays/draws-overlay.dts
+++ b/arch/arm/boot/dts/overlays/draws-overlay.dts
@@ -9,7 +9,7 @@
/ {
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -131,7 +131,7 @@
target = <&sound>;
snd: __overlay__ {
compatible = "simple-audio-card";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
simple-audio-card,name = "draws";
@@ -153,7 +153,7 @@
"Line Out", "LOL";
dailink0_master: simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
simple-audio-card,codec {
--- a/arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts
+++ b/arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts
@@ -25,21 +25,21 @@
};
__overrides__ {
- i2c0 = <&frag13>,"target:0=",<&i2c0>;
- i2c1 = <&frag13>, "target?=0",
- <&frag13>, "target-path=i2c1",
+ i2c0 = <&ts_i2c_frag>,"target:0=",<&i2c0>;
+ i2c1 = <&ts_i2c_frag>, "target?=0",
+ <&ts_i2c_frag>, "target-path=i2c1",
<0>,"-0-1";
- i2c3 = <&frag13>, "target?=0",
- <&frag13>, "target-path=i2c3",
+ i2c3 = <&ts_i2c_frag>, "target?=0",
+ <&ts_i2c_frag>, "target-path=i2c3",
<0>,"-0-1";
- i2c4 = <&frag13>, "target?=0",
- <&frag13>, "target-path=i2c4",
+ i2c4 = <&ts_i2c_frag>, "target?=0",
+ <&ts_i2c_frag>, "target-path=i2c4",
<0>,"-0-1";
- i2c5 = <&frag13>, "target?=0",
- <&frag13>, "target-path=i2c5",
+ i2c5 = <&ts_i2c_frag>, "target?=0",
+ <&ts_i2c_frag>, "target-path=i2c5",
<0>,"-0-1";
- i2c6 = <&frag13>, "target?=0",
- <&frag13>, "target-path=i2c6",
+ i2c6 = <&ts_i2c_frag>, "target?=0",
+ <&ts_i2c_frag>, "target-path=i2c6",
<0>,"-0-1";
addr = <&ft5406>,"reg:0";
};
--- a/arch/arm/boot/dts/overlays/edt-ft5406.dtsi
+++ b/arch/arm/boot/dts/overlays/edt-ft5406.dtsi
@@ -37,7 +37,7 @@
};
};
- frag13: fragment@13 {
+ ts_i2c_frag: fragment@13 {
target = <&i2c_csi_dsi>;
i2cbus: __overlay__ {
status = "okay";
--- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts
@@ -53,7 +53,7 @@
};
fragment@3 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -63,7 +63,7 @@
target = <&sound>;
__overlay__ {
compatible = "fe-pi,fe-pi-audio";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/ghost-amp-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ghost-amp-overlay.dts
@@ -14,7 +14,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -43,7 +43,7 @@
target = <&sound>;
iqaudio_dac: __overlay__ {
compatible = "iqaudio,iqaudio-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
mute-gpios = <&amp 0 0>;
iqaudio-dac,auto-mute-amp;
status = "okay";
--- a/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts
+++ b/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -42,7 +42,7 @@
target = <&sound>;
__overlay__ {
compatible = "googlevoicehat,googlevoicehat-soundcard";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberry,hifiberry-amp";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-amp100-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-amp100-overlay.dts
@@ -15,8 +15,8 @@
};
};
- fragment@1 {
- target = <&i2s>;
+ frag1: fragment@1 {
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -46,7 +46,7 @@
target = <&sound>;
hifiberry_dacplus: __overlay__ {
compatible = "hifiberry,hifiberry-dacplus";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
mute-gpio = <&gpio 4 0>;
reset-gpio = <&gpio 17 0x11>;
@@ -56,7 +56,10 @@
__overrides__ {
24db_digital_gain =
<&hifiberry_dacplus>,"hifiberry,24db_digital_gain?";
- slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?";
+ slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?",
+ <&frag1>,"target:0=",<&i2s_clk_producer>,
+ <&hifiberry_dacplus>,"i2s-controller:0=",<&i2s_clk_producer>;
+
leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?";
mute_ext_ctl = <&hifiberry_dacplus>,"hifiberry-dacplus,mute_ext_ctl:0";
auto_mute = <&hifiberry_dacplus>,"hifiberry-dacplus,auto_mute?";
--- a/arch/arm/boot/dts/overlays/hifiberry-amp3-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-amp3-overlay.dts
@@ -10,7 +10,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -50,7 +50,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberry,hifiberry-amp3";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -27,7 +27,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberry,hifiberry-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts
@@ -15,8 +15,8 @@
};
};
- fragment@1 {
- target = <&i2s>;
+ frag1: fragment@1 {
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -51,7 +51,7 @@
target = <&sound>;
hifiberry_dacplus: __overlay__ {
compatible = "hifiberry,hifiberry-dacplus";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
@@ -59,7 +59,10 @@
__overrides__ {
24db_digital_gain =
<&hifiberry_dacplus>,"hifiberry,24db_digital_gain?";
- slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?";
+ slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?",
+ <&frag1>,"target:0=",<&i2s_clk_producer>,
+ <&hifiberry_dacplus>,"i2s-controller:0=",<&i2s_clk_producer>;
+
leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts
@@ -15,8 +15,8 @@
};
};
- fragment@1 {
- target = <&i2s>;
+ frag1: fragment@1 {
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -58,7 +58,7 @@
target = <&sound>;
hifiberry_dacplusadc: __overlay__ {
compatible = "hifiberry,hifiberry-dacplusadc";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
@@ -66,7 +66,9 @@
__overrides__ {
24db_digital_gain =
<&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?";
- slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?";
+ slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?",
+ <&frag1>,"target:0=",<&i2s_clk_producer>,
+ <&hifiberry_dacplusadc>,"i2s-controller:0=",<&i2s_clk_producer>;
leds_off = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,leds_off?";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts
@@ -15,8 +15,8 @@
};
};
- fragment@1 {
- target = <&i2s>;
+ frag1: fragment@1 {
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -56,7 +56,7 @@
hifiberry_dacplusadcpro: __overlay__ {
compatible = "hifiberry,hifiberry-dacplusadcpro";
audio-codec = <&hb_dac &hb_adc>;
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
@@ -64,7 +64,9 @@
__overrides__ {
24db_digital_gain =
<&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?";
- slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?";
+ slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?",
+ <&frag1>,"target:0=",<&i2s_clk_producer>,
+ <&hifiberry_dacplusadcpro>,"i2s-controller:0=",<&i2s_clk_producer>;
leds_off = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,leds_off?";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -27,7 +27,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts
@@ -8,7 +8,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -84,7 +84,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberry,hifiberry-dacplushd";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
clocks = <&pll 0>;
reset-gpio = <&gpio 16 GPIO_ACTIVE_LOW>;
status = "okay";
--- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -34,7 +34,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberry,hifiberry-digi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -34,7 +34,7 @@
target = <&sound>;
__overlay__ {
compatible = "hifiberry,hifiberry-digi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
clock44-gpio = <&gpio 5 0>;
clock48-gpio = <&gpio 6 0>;
--- a/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts
@@ -9,13 +9,13 @@
target = <&sound>;
frag0: __overlay__ {
compatible = "audiophonics,i-sabre-q2m";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
fragment@1 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/i2c0-pi5-overlay.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&i2c0>;
+ frag0: __overlay__ {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+ };
+
+ fragment@1 {
+ target = <&frag0>;
+ __overlay__ {
+ pinctrl-0 = <&rp1_i2c0_0_1>;
+ };
+ };
+
+ fragment@2 {
+ target = <&frag0>;
+ __dormant__ {
+ pinctrl-0 = <&rp1_i2c0_8_9>;
+ };
+ };
+
+ __overrides__ {
+ pins_0_1 = <0>,"+1-2";
+ pins_8_9 = <0>,"-1+2";
+ baudrate = <&frag0>, "clock-frequency:0";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/i2c1-pi5-overlay.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&i2c1>;
+ frag0: __overlay__ {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+ };
+
+ fragment@1 {
+ target = <&frag0>;
+ __overlay__ {
+ pinctrl-0 = <&rp1_i2c1_2_3>;
+ };
+ };
+
+ fragment@2 {
+ target = <&frag0>;
+ __dormant__ {
+ pinctrl-0 = <&rp1_i2c1_10_11>;
+ };
+ };
+
+ __overrides__ {
+ pins_2_3 = <0>,"+1-2";
+ pins_10_11 = <0>,"-1+2";
+ baudrate = <&frag0>, "clock-frequency:0";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/i2c2-pi5-overlay.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&i2c2>;
+ frag0: __overlay__ {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&rp1_i2c2_4_5>;
+ };
+ };
+
+ __overrides__ {
+ pins_4_5 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c2_4_5>;
+ pins_12_13 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c2_12_13>;
+ baudrate = <&frag0>, "clock-frequency:0";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/i2c3-pi5-overlay.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&i2c3>;
+ frag0: __overlay__ {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&rp1_i2c3_6_7>;
+ };
+ };
+
+ __overrides__ {
+ pins_6_7 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c3_6_7>;
+ pins_14_15 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c3_14_15>;
+ pins_22_23 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c3_22_23>;
+ baudrate = <&frag0>, "clock-frequency:0";
+ };
+};
--- a/arch/arm/boot/dts/overlays/i2s-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2s-dac-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -27,7 +27,7 @@
target = <&sound>;
__overlay__ {
compatible = "rpi,rpi-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/imx219-overlay.dts
+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts
@@ -69,7 +69,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/imx258-overlay.dts
+++ b/arch/arm/boot/dts/overlays/imx258-overlay.dts
@@ -110,7 +110,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&reg_frag>, "target:0=",<&cam0_reg>,
--- a/arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi
+++ b/arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi
@@ -95,7 +95,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/imx296-overlay.dts
+++ b/arch/arm/boot/dts/overlays/imx296-overlay.dts
@@ -94,7 +94,7 @@
rotation = <&imx296>,"rotation:0";
orientation = <&imx296>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&imx296>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/imx477_378-overlay.dtsi
+++ b/arch/arm/boot/dts/overlays/imx477_378-overlay.dtsi
@@ -65,7 +65,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&reg_frag>, "target:0=",<&cam0_reg>,
--- a/arch/arm/boot/dts/overlays/imx519-overlay.dts
+++ b/arch/arm/boot/dts/overlays/imx519-overlay.dts
@@ -69,7 +69,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/imx708-overlay.dts
+++ b/arch/arm/boot/dts/overlays/imx708-overlay.dts
@@ -79,12 +79,12 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&reg_frag>, "target:0=",<&cam0_reg>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
- <&cam_node>, "VANA1-supply:0=",<&cam0_reg>,
+ <&cam_node>, "vana1-supply:0=",<&cam0_reg>,
<&vcm_node>, "VDD-supply:0=",<&cam0_reg>;
vcm = <&vcm_node>, "status",
<0>, "=4";
--- a/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts
+++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
iqaudio_dac: __overlay__ {
compatible = "iqaudio,iqaudio-codec";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -35,7 +35,7 @@
target = <&sound>;
frag2: __overlay__ {
compatible = "iqaudio,iqaudio-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts
+++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -35,7 +35,7 @@
target = <&sound>;
iqaudio_dac: __overlay__ {
compatible = "iqaudio,iqaudio-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
mute-gpios = <&gpio 22 0>;
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -34,7 +34,7 @@
target = <&sound>;
wm8804_digi: __overlay__ {
compatible = "iqaudio,wm8804-digi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/irs1125-overlay.dts
+++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts
@@ -82,7 +82,7 @@
__overrides__ {
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&irs1125>, "clocks:0=",<&cam0_clk>;
--- a/arch/arm/boot/dts/overlays/justboom-both-overlay.dts
+++ b/arch/arm/boot/dts/overlays/justboom-both-overlay.dts
@@ -7,7 +7,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -54,7 +54,7 @@
target = <&sound>;
frag3: __overlay__ {
compatible = "justboom,justboom-both";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -35,7 +35,7 @@
target = <&sound>;
frag2: __overlay__ {
compatible = "justboom,justboom-dac";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -34,7 +34,7 @@
target = <&sound>;
__overlay__ {
compatible = "justboom,justboom-digi";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/max98357a-overlay.dts
+++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts
@@ -12,7 +12,7 @@
/* Enable I2S */
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -52,7 +52,7 @@
simple-audio-card,name = "MAX98357A";
status = "okay";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
simple-audio-card,codec {
sound-dai = <&max98357a_dac>;
@@ -69,7 +69,7 @@
simple-audio-card,name = "MAX98357A";
status = "okay";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
simple-audio-card,codec {
sound-dai = <&max98357a_nsd>;
--- a/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
simple-audio-card,name = "mbed-DAC";
@@ -52,7 +52,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
sound_master: simple-audio-card,codec {
--- a/arch/arm/boot/dts/overlays/merus-amp-overlay.dts
+++ b/arch/arm/boot/dts/overlays/merus-amp-overlay.dts
@@ -9,7 +9,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -52,7 +52,7 @@
target = <&sound>;
__overlay__ {
compatible = "merus,merus-amp";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/midi-uart0-pi5-overlay.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rp1.h>
+
+/*
+ * Fake a higher clock rate to get a larger divisor, and thereby a lower
+ * baudrate. The real clock is 100MHz, which we scale so that requesting
+ * 38.4kHz results in an actual 31.25kHz.
+ *
+ * 100000000*38400/31250 = 122880000
+ */
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target-path = "/";
+ __overlay__ {
+ midi_clk: midi_clk0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "uart0_pclk";
+ clock-frequency = <122880000>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&uart0>;
+ __overlay__ {
+ clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/midi-uart1-pi5-overlay.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rp1.h>
+
+/*
+ * Fake a higher clock rate to get a larger divisor, and thereby a lower
+ * baudrate. The real clock is 100MHz, which we scale so that requesting
+ * 38.4kHz results in an actual 31.25kHz.
+ *
+ * 100000000*38400/31250 = 122880000
+ */
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target-path = "/";
+ __overlay__ {
+ midi_clk: midi_clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "uart1_pclk";
+ clock-frequency = <122880000>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&uart1>;
+ __overlay__ {
+ clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/midi-uart2-pi5-overlay.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rp1.h>
+
+/*
+ * Fake a higher clock rate to get a larger divisor, and thereby a lower
+ * baudrate. The real clock is 100MHz, which we scale so that requesting
+ * 38.4kHz results in an actual 31.25kHz.
+ *
+ * 100000000*38400/31250 = 122880000
+ */
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target-path = "/";
+ __overlay__ {
+ midi_clk: midi_clk2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "uart2_pclk";
+ clock-frequency = <122880000>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&uart2>;
+ __overlay__ {
+ clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/midi-uart3-pi5-overlay.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rp1.h>
+
+/*
+ * Fake a higher clock rate to get a larger divisor, and thereby a lower
+ * baudrate. The real clock is 100MHz, which we scale so that requesting
+ * 38.4kHz results in an actual 31.25kHz.
+ *
+ * 100000000*38400/31250 = 122880000
+ */
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target-path = "/";
+ __overlay__ {
+ midi_clk: midi_clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "uart3_pclk";
+ clock-frequency = <122880000>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&uart3>;
+ __overlay__ {
+ clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/midi-uart4-pi5-overlay.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rp1.h>
+
+/*
+ * Fake a higher clock rate to get a larger divisor, and thereby a lower
+ * baudrate. The real clock is 100MHz, which we scale so that requesting
+ * 38.4kHz results in an actual 31.25kHz.
+ *
+ * 100000000*38400/31250 = 122880000
+ */
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target-path = "/";
+ __overlay__ {
+ midi_clk: midi_clk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "uart4_pclk";
+ clock-frequency = <122880000>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&uart4>;
+ __overlay__ {
+ clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/overlays/ov2311-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ov2311-overlay.dts
@@ -60,7 +60,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts
@@ -72,7 +72,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&reg_frag>, "target:0=",<&cam0_reg>,
<&clk_frag>, "target:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/ov7251-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ov7251-overlay.dts
@@ -60,7 +60,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/ov9281-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ov9281-overlay.dts
@@ -61,7 +61,7 @@
rotation = <&cam_node>,"rotation:0";
orientation = <&cam_node>,"orientation:0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&cam_node>, "clocks:0=",<&cam0_clk>,
--- a/arch/arm/boot/dts/overlays/overlay_map.dts
+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
@@ -1,32 +1,100 @@
/dts-v1/;
/ {
+ audremap {
+ bcm2835;
+ bcm2711;
+ };
+
+ balena-fin {
+ bcm2835;
+ bcm2711;
+ };
+
bmp085_i2c-sensor {
deprecated = "use i2c-sensor,bmp085";
};
+ cm-swap-i2c0 {
+ bcm2835;
+ bcm2711;
+ };
+
cutiepi-panel {
bcm2711;
};
+ disable-bt {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "disable-bt-pi5";
+ };
+
+ disable-bt-pi5 {
+ bcm2712;
+ };
+
disable-emmc2 {
bcm2711;
};
+ disable-wifi {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "disable-wifi-pi5";
+ };
+
+ disable-wifi-pi5 {
+ bcm2712;
+ };
+
highperi {
bcm2711;
};
+ i2c0 {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "i2c0-pi5";
+ };
+
i2c0-bcm2708 {
deprecated = "use i2c0";
};
+ i2c0-pi5 {
+ bcm2712;
+ };
+
+ i2c1 {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "i2c1-pi5";
+ };
+
i2c1-bcm2708 {
deprecated = "use i2c1";
};
+ i2c1-pi5 {
+ bcm2712;
+ };
+
+ i2c2 {
+ bcm2712 = "i2c2-pi5";
+ };
+
+ i2c2-pi5 {
+ bcm2712;
+ };
+
i2c3 {
bcm2711;
+ bcm2712 = "i2c3-pi5";
+ };
+
+ i2c3-pi5 {
+ bcm2712;
};
i2c4 {
@@ -41,26 +109,76 @@
bcm2711;
};
+ i2s-gpio28-31 {
+ bcm2835;
+ bcm2711;
+ };
+
lirc-rpi {
deprecated = "use gpio-ir";
};
+ midi-uart0 {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "midi-uart0-pi5";
+ };
+
+ midi-uart0-pi5 {
+ bcm2712;
+ };
+
+ midi-uart1 {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "midi-uart1-pi5";
+ };
+
+ midi-uart1-pi5 {
+ bcm2712;
+ };
+
midi-uart2 {
bcm2711;
+ bcm2712 = "midi-uart2-pi5";
+ };
+
+ midi-uart2-pi5 {
+ bcm2712;
};
midi-uart3 {
bcm2711;
+ bcm2712 = "midi-uart3-pi5";
+ };
+
+ midi-uart3-pi5 {
+ bcm2712;
};
midi-uart4 {
bcm2711;
+ bcm2712 = "midi-uart4-pi5";
+ };
+
+ midi-uart4-pi5 {
+ bcm2712;
};
midi-uart5 {
bcm2711;
};
+ miniuart-bt {
+ bcm2835;
+ bcm2711;
+ };
+
+ mmc {
+ bcm2835;
+ bcm2711;
+ };
+
mpu6050 {
deprecated = "use i2c-sensor,mpu6050";
};
@@ -118,6 +236,16 @@
deprecated = "no longer necessary";
};
+ sdhost {
+ bcm2835;
+ bcm2711;
+ };
+
+ sdio {
+ bcm2835;
+ bcm2711;
+ };
+
sdio-1bit {
deprecated = "use sdio,bus_width=1,gpios_22_25";
};
@@ -126,6 +254,21 @@
deprecated = "use 'dtparam=sd_poll_once' etc.";
};
+ smi {
+ bcm2835;
+ bcm2711;
+ };
+
+ smi-dev {
+ bcm2835;
+ bcm2711;
+ };
+
+ smi-nand {
+ bcm2835;
+ bcm2711;
+ };
+
spi0-cs {
renamed = "spi0-2cs";
};
@@ -134,12 +277,42 @@
deprecated = "no longer necessary";
};
+ spi2-1cs {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "spi2-1cs-pi5";
+ };
+
+ spi2-1cs-pi5 {
+ bcm2712;
+ };
+
+ spi2-2cs {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "spi2-2cs-pi5";
+ };
+
+ spi2-2cs-pi5 {
+ bcm2712;
+ };
+
spi3-1cs {
bcm2711;
+ bcm2712 = "spi3-1cs-pi5";
+ };
+
+ spi3-1cs-pi5 {
+ bcm2712;
};
spi3-2cs {
bcm2711;
+ bcm2712 = "spi3-2cs-pi5";
+ };
+
+ spi3-2cs-pi5 {
+ bcm2712;
};
spi4-1cs {
@@ -152,10 +325,20 @@
spi5-1cs {
bcm2711;
+ bcm2712 = "spi5-1cs-pi5";
+ };
+
+ spi5-1cs-pi5 {
+ bcm2712;
};
spi5-2cs {
bcm2711;
+ bcm2712 = "spi5-2cs-pi5";
+ };
+
+ spi5-2cs-pi5 {
+ bcm2712;
};
spi6-1cs {
@@ -166,16 +349,51 @@
bcm2711;
};
+ uart0 {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "uart0-pi5";
+ };
+
+ uart0-pi5 {
+ bcm2712;
+ };
+
+ uart1 {
+ bcm2835;
+ bcm2711;
+ bcm2712 = "uart1-pi5";
+ };
+
+ uart1-pi5 {
+ bcm2712;
+ };
+
uart2 {
bcm2711;
+ bcm2712 = "uart2-pi5";
+ };
+
+ uart2-pi5 {
+ bcm2712;
};
uart3 {
bcm2711;
+ bcm2712 = "uart3-pi5";
+ };
+
+ uart3-pi5 {
+ bcm2712;
};
uart4 {
bcm2711;
+ bcm2712 = "uart4-pi5";
+ };
+
+ uart4-pi5 {
+ bcm2712;
};
uart5 {
@@ -198,10 +416,12 @@
vc4-fkms-v3d {
bcm2835;
bcm2711 = "vc4-fkms-v3d-pi4";
+ bcm2712 = "vc4-fkms-v3d-pi4";
};
vc4-fkms-v3d-pi4 {
bcm2711;
+ bcm2712;
};
vc4-kms-dpi-at056tn53v1 {
@@ -211,10 +431,16 @@
vc4-kms-v3d {
bcm2835;
bcm2711 = "vc4-kms-v3d-pi4";
+ bcm2712 = "vc4-kms-v3d-pi5";
};
vc4-kms-v3d-pi4 {
bcm2711;
+ bcm2712 = "vc4-kms-v3d-pi5";
+ };
+
+ vc4-kms-v3d-pi5 {
+ bcm2712;
};
vl805 {
--- a/arch/arm/boot/dts/overlays/pibell-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pibell-overlay.dts
@@ -24,7 +24,7 @@
};
fragment@1 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
@@ -43,7 +43,7 @@
format = "i2s";
r_cpu_dai: cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
/* example TDM slot configuration
dai-tdm-slot-num = <2>;
@@ -60,7 +60,7 @@
format = "i2s";
p_cpu_dai: cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
/* example TDM slot configuration
dai-tdm-slot-num = <2>;
--- a/arch/arm/boot/dts/overlays/pifi-40-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pifi-40-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -42,7 +42,7 @@
pifi_40: __overlay__ {
compatible = "pifi,pifi-40";
audio-codec = <&tas5711l &tas5711r>;
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
pdn-gpios = <&gpio 23 1>;
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/pifi-dac-hd-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pifi-dac-hd-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -38,7 +38,7 @@
simple-audio-card,dai-link@1 {
format = "i2s";
cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
codec {
sound-dai = <&pcm5142>;
--- a/arch/arm/boot/dts/overlays/pifi-dac-zero-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pifi-dac-zero-overlay.dts
@@ -16,7 +16,7 @@
format = "i2s";
cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
@@ -40,7 +40,7 @@
};
fragment@2 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
--- a/arch/arm/boot/dts/overlays/pifi-mini-210-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pifi-mini-210-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -34,7 +34,7 @@
target = <&sound>;
__overlay__ {
compatible = "pifi,pifi-mini-210";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/pisound-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts
@@ -75,7 +75,7 @@
target = <&sound>;
__overlay__ {
compatible = "blokaslabs,pisound";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
pinctrl-names = "default";
@@ -108,7 +108,7 @@
};
fragment@7 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/proto-codec-overlay.dts
+++ b/arch/arm/boot/dts/overlays/proto-codec-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -32,7 +32,7 @@
target = <&sound>;
__overlay__ {
compatible = "rpi,rpi-proto";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -42,7 +42,7 @@
target = <&sound>;
__overlay__ {
compatible = "rra,digidac1-soundcard";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
};
};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-1cs-pi5-overlay.dts
@@ -0,0 +1,33 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&spi2>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio 0 1>;
+ status = "okay";
+
+ spidev2_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&frag1>,"cs-gpios:4";
+ cs0_spidev = <&spidev2_0>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-2cs-pi5-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&spi2>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio 0 1>, <&gpio 24 1>;
+ status = "okay";
+
+ spidev2_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+
+ spidev2_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&frag1>,"cs-gpios:4";
+ cs1_pin = <&frag1>,"cs-gpios:16";
+ cs0_spidev = <&spidev2_0>,"status";
+ cs1_spidev = <&spidev2_1>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi3-1cs-pi5-overlay.dts
@@ -0,0 +1,33 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&spi3>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio 4 1>;
+ status = "okay";
+
+ spidev3_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&frag1>,"cs-gpios:4";
+ cs0_spidev = <&spidev3_0>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi3-2cs-pi5-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&spi3>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio 4 1>, <&gpio 25 1>;
+ status = "okay";
+
+ spidev3_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+
+ spidev3_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&frag1>,"cs-gpios:4";
+ cs1_pin = <&frag1>,"cs-gpios:16";
+ cs0_spidev = <&spidev3_0>,"status";
+ cs1_spidev = <&spidev3_1>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi5-1cs-pi5-overlay.dts
@@ -0,0 +1,33 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&spi5>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio 12 1>;
+ status = "okay";
+
+ spidev5_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&frag1>,"cs-gpios:4";
+ cs0_spidev = <&spidev5_0>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi5-2cs-pi5-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&spi5>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio 12 1>, <&gpio 26 1>;
+ status = "okay";
+
+ spidev5_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+
+ spidev5_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ status = "okay";
+ };
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&frag1>,"cs-gpios:4";
+ cs1_pin = <&frag1>,"cs-gpios:16";
+ cs0_spidev = <&spidev5_0>,"status";
+ cs1_spidev = <&spidev5_1>,"status";
+ };
+};
--- a/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts
+++ b/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts
@@ -9,7 +9,7 @@
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_consumer>;
status = "okay";
simple-audio-card,name = "SuperAudioBoard";
@@ -32,7 +32,7 @@
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_consumer>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
@@ -45,7 +45,7 @@
};
fragment@1 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts
@@ -8,7 +8,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -31,16 +31,16 @@
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "tc358743";
- simple-audio-card,bitclock-master = <&dailink0_slave>;
- simple-audio-card,frame-master = <&dailink0_slave>;
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
status = "okay";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_consumer>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
- dailink0_slave: simple-audio-card,codec {
+ dailink0_master: simple-audio-card,codec {
sound-dai = <&tc358743_codec>;
};
};
--- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts
+++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts
@@ -101,7 +101,7 @@
4lane = <0>, "-2+3-7+8";
link-frequency = <&tc358743_0>,"link-frequencies#0";
media-controller = <&csi>,"brcm,media-controller?";
- cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>,
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
<&csi_frag>, "target:0=",<&csi0>,
<&clk_frag>, "target:0=",<&cam0_clk>,
<&tc358743>, "clocks:0=",<&cam0_clk>;
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/uart0-pi5-overlay.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&uart0>;
+ frag0: __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ ctsrts = <&frag0>,"pinctrl-0:4=",<&uart0_ctsrts_pins>;
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/uart1-pi5-overlay.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&uart1>;
+ frag0: __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ ctsrts = <&frag0>,"pinctrl-0:4=",<&uart1_ctsrts_pins>;
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/uart2-pi5-overlay.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&uart2>;
+ frag0: __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ ctsrts = <&frag0>,"pinctrl-0:4=",<&uart2_ctsrts_pins>;
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/uart3-pi5-overlay.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&uart3>;
+ frag0: __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ ctsrts = <&frag0>,"pinctrl-0:4=",<&uart3_ctsrts_pins>;
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/uart4-pi5-overlay.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2712";
+
+ fragment@0 {
+ target = <&uart4>;
+ frag0: __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ ctsrts = <&frag0>,"pinctrl-0:4=",<&uart4_ctsrts_pins>;
+ };
+};
--- a/arch/arm/boot/dts/overlays/udrc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts
@@ -9,7 +9,7 @@
/ {
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
clocks = <&clocks BCM2835_CLOCK_PCM>;
clock-names = "pcm";
@@ -71,7 +71,7 @@
target = <&sound>;
snd: __overlay__ {
compatible = "simple-audio-card";
- i2s-controller = <&i2s>;
+ i2s-controller = <&i2s_clk_producer>;
status = "okay";
simple-audio-card,name = "udrc";
@@ -93,7 +93,7 @@
"Line Out", "LOL";
dailink0_master: simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
simple-audio-card,codec {
--- a/arch/arm/boot/dts/overlays/ugreen-dabboard-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ugreen-dabboard-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_consumer>;
__overlay__ {
status = "okay";
};
@@ -29,14 +29,14 @@
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "dabboard";
- simple-audio-card,bitclock-master = <&dailink0_slave>;
- simple-audio-card,frame-master = <&dailink0_slave>;
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
simple-audio-card,widgets = "Microphone", "Microphone Jack";
status = "okay";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_consumer>;
};
- dailink0_slave: simple-audio-card,codec {
+ dailink0_master: simple-audio-card,codec {
#sound-dai-cells = <0>;
sound-dai = <&dmic_codec>;
};
--- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts
@@ -37,4 +37,10 @@
status = "okay";
};
};
+ fragment@5 {
+ target-path = "/chosen";
+ __overlay__ {
+ bootargs = "clk_ignore_unused";
+ };
+ };
};
--- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-pi4-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-pi4-overlay.dts
@@ -41,4 +41,10 @@
status = "okay";
};
};
+ fragment@5 {
+ target-path = "/chosen";
+ __overlay__ {
+ bootargs = "clk_ignore_unused";
+ };
+ };
};
--- a/arch/arm/boot/dts/overlays/vc4-kms-dsi-7inch-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dsi-7inch-overlay.dts
@@ -11,7 +11,7 @@
/ {
/* No compatible as it will have come from edt-ft5406.dtsi */
- fragment@0 {
+ dsi_frag: fragment@0 {
target = <&dsi1>;
__overlay__ {
#address-cells = <1>;
@@ -51,8 +51,8 @@
fragment@1 {
target-path = "/";
__overlay__ {
- panel_disp1: panel_disp1@0 {
- reg = <0>;
+ panel_disp: panel_disp@1 {
+ reg = <1>;
compatible = "raspberrypi,7inch-dsi", "simple-panel";
backlight = <&reg_display>;
power-supply = <&reg_display>;
@@ -64,8 +64,8 @@
};
};
- reg_bridge: reg_bridge@0 {
- reg = <0>;
+ reg_bridge: reg_bridge@1 {
+ reg = <1>;
compatible = "regulator-fixed";
regulator-name = "bridge_reg";
gpio = <&reg_display 0 0>;
@@ -75,7 +75,7 @@
};
};
- fragment@2 {
+ i2c_frag: fragment@2 {
target = <&i2c_csi_dsi>;
__overlay__ {
#address-cells = <1>;
@@ -113,6 +113,12 @@
};
__overrides__ {
+ dsi0 = <&dsi_frag>, "target:0=",<&dsi0>,
+ <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
+ <&ts_i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
+ <&panel_disp>, "reg:0=0",
+ <&reg_bridge>, "reg:0=0",
+ <&reg_bridge>, "regulator-name=bridge_reg_0";
disable_touch = <0>, "-10-11-12";
};
};
--- a/arch/arm/boot/dts/overlays/vc4-kms-dsi-waveshare-panel-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dsi-waveshare-panel-overlay.dts
@@ -9,7 +9,7 @@
/ {
compatible = "brcm,bcm2835";
- fragment@0 {
+ dsi_frag: fragment@0 {
target = <&dsi1>;
__overlay__ {
#address-cells = <1>;
@@ -29,7 +29,7 @@
};
};
- frag2: fragment@2 {
+ i2c_frag: fragment@2 {
target = <&i2c_csi_dsi>;
__overlay__ {
#address-cells = <1>;
@@ -112,12 +112,14 @@
<&touch>, "touchscreen-size-y:0=1480",
<&touch>, "touchscreen-inverted-x?",
<&touch>, "touchscreen-swapped-x-y?";
- i2c1 = <&frag2>, "target:0=",<&i2c1>,
+ i2c1 = <&i2c_frag>, "target:0=",<&i2c1>,
<0>, "-3-4+5";
disable_touch = <&touch>, "status=disabled";
rotation = <&panel>, "rotation:0";
invx = <&touch>,"touchscreen-inverted-x?";
invy = <&touch>,"touchscreen-inverted-y?";
swapxy = <&touch>,"touchscreen-swapped-x-y?";
+ dsi0 = <&dsi_frag>, "target:0=",<&dsi0>,
+ <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>;
};
};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-pi5-overlay.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "cma-overlay.dts"
+
+&frag0 {
+ size = <((320-4)*1024*1024)>;
+};
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ fragment@1 {
+ target = <&fb>;
+ __overlay__ {
+ status = "disabled";
+ };
+ };
+
+ fragment@2 {
+ target = <&aon_intr>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@3 {
+ target = <&ddc0>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@4 {
+ target = <&ddc1>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@5 {
+ target = <&hdmi0>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@6 {
+ target = <&hdmi1>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@7 {
+ target = <&hvs>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@8 {
+ target = <&mop>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@9 {
+ target = <&moplet>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@10 {
+ target = <&pixelvalve0>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@11 {
+ target = <&pixelvalve1>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@12 {
+ target = <&v3d>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@13 {
+ target = <&vec>;
+ frag13: __overlay__ {
+ status = "disabled";
+ };
+ };
+
+ fragment@14 {
+ target = <&hdmi0>;
+ __dormant__ {
+ dmas;
+ };
+ };
+
+ fragment@15 {
+ target = <&hdmi1>;
+ __dormant__ {
+ dmas;
+ };
+ };
+
+ fragment@16 {
+ target = <&disp_intr>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@17 {
+ target = <&vc4>;
+ __overlay__ {
+ /* IOMMU attaches here, where we allocate DMA buffers */
+ iommus = <&iommu4>;
+ };
+ };
+
+ __overrides__ {
+ audio = <0>,"!14";
+ audio1 = <0>,"!15";
+ noaudio = <0>,"=14", <0>,"=15";
+ composite = <0>, "!3",
+ <0>, "!4",
+ <0>, "!5",
+ <0>, "!6",
+ <0>, "!10",
+ <0>, "!11",
+ <&frag13>, "status";
+ nohdmi0 = <0>, "-3-5-10";
+ nohdmi1 = <0>, "-4-6-11";
+ nohdmi = <0>, "-3-4-5-6-10-11";
+ };
+};
--- a/arch/arm/boot/dts/overlays/vc4-kms-vga666-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-kms-vga666-overlay.dts
@@ -94,7 +94,14 @@
};
};
+ fragment@5 {
+ target = <&i2c_vc>;
+ __dormant__ {
+ status = "okay";
+ };
+ };
+
__overrides__ {
- ddc = <0>,"=2", <0>,"=3", <0>,"=4";
+ ddc = <0>,"=2", <0>,"=3", <0>,"=4", <0>,"=5";
};
};
--- a/arch/arm/boot/dts/overlays/wm8960-soundcard-overlay.dts
+++ b/arch/arm/boot/dts/overlays/wm8960-soundcard-overlay.dts
@@ -6,7 +6,7 @@
compatible = "brcm,bcm2835";
fragment@0 {
- target = <&i2s>;
+ target = <&i2s_clk_producer>;
__overlay__ {
status = "okay";
};
@@ -65,7 +65,7 @@
"RINPUT2", "Mic Jack";
simple-audio-card,cpu {
- sound-dai = <&i2s>;
+ sound-dai = <&i2s_clk_producer>;
};
dailink0_slave: simple-audio-card,codec {
sound-dai = <&wm8960>;
--- /dev/null
+++ b/arch/arm/boot/dts/rp1.dtsi
@@ -0,0 +1,1168 @@
+#include <dt-bindings/clock/rp1.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/rp1.h>
+
+&rp1_target {
+ rp1: rp1 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&rp1>;
+
+ // ranges and dma-ranges must be provided by the includer
+
+ rp1_clocks: clocks@18000 {
+ compatible = "raspberrypi,rp1-clocks";
+ #clock-cells = <1>;
+ reg = <0xc0 0x40018000 0x0 0x10038>;
+ clocks = <&clk_xosc>;
+
+ assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+ <&rp1_clocks RP1_PLL_AUDIO_CORE>,
+ // RP1_PLL_VIDEO_CORE and dividers are now managed by VEC,DPI drivers
+ <&rp1_clocks RP1_PLL_SYS>,
+ <&rp1_clocks RP1_PLL_SYS_SEC>,
+ <&rp1_clocks RP1_PLL_AUDIO>,
+ <&rp1_clocks RP1_PLL_AUDIO_SEC>,
+ <&rp1_clocks RP1_CLK_SYS>,
+ <&rp1_clocks RP1_PLL_SYS_PRI_PH>,
+ // RP1_CLK_SLOW_SYS is used for the frequency counter (FC0)
+ <&rp1_clocks RP1_CLK_SLOW_SYS>,
+ <&rp1_clocks RP1_CLK_SDIO_TIMER>,
+ <&rp1_clocks RP1_CLK_SDIO_ALT_SRC>,
+ <&rp1_clocks RP1_CLK_ETH_TSU>;
+
+ assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+ <1536000000>, // RP1_PLL_AUDIO_CORE
+ <200000000>, // RP1_PLL_SYS
+ <125000000>, // RP1_PLL_SYS_SEC
+ <61440000>, // RP1_PLL_AUDIO
+ <192000000>, // RP1_PLL_AUDIO_SEC
+ <200000000>, // RP1_CLK_SYS
+ <100000000>, // RP1_PLL_SYS_PRI_PH
+ // Must match the XOSC frequency
+ <50000000>, // RP1_CLK_SLOW_SYS
+ <1000000>, // RP1_CLK_SDIO_TIMER
+ <200000000>, // RP1_CLK_SDIO_ALT_SRC
+ <50000000>; // RP1_CLK_ETH_TSU
+ };
+
+ rp1_uart0: serial@30000 {
+ compatible = "arm,pl011-axi";
+ reg = <0xc0 0x40030000 0x0 0x100>;
+ interrupts = <RP1_INT_UART0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ clock-names = "uartclk", "apb_pclk";
+ dmas = <&rp1_dma RP1_DMA_UART0_TX>,
+ <&rp1_dma RP1_DMA_UART0_RX>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ arm,primecell-periphid = <0x00541011>;
+ uart-has-rtscts;
+ cts-event-workaround;
+ skip-init;
+ status = "disabled";
+ };
+
+ rp1_uart1: serial@34000 {
+ compatible = "arm,pl011-axi";
+ reg = <0xc0 0x40034000 0x0 0x100>;
+ interrupts = <RP1_INT_UART1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ clock-names = "uartclk", "apb_pclk";
+ // dmas = <&rp1_dma RP1_DMA_UART1_TX>,
+ // <&rp1_dma RP1_DMA_UART1_RX>;
+ // dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ arm,primecell-periphid = <0x00541011>;
+ uart-has-rtscts;
+ cts-event-workaround;
+ skip-init;
+ status = "disabled";
+ };
+
+ rp1_uart2: serial@38000 {
+ compatible = "arm,pl011-axi";
+ reg = <0xc0 0x40038000 0x0 0x100>;
+ interrupts = <RP1_INT_UART2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ clock-names = "uartclk", "apb_pclk";
+ // dmas = <&rp1_dma RP1_DMA_UART2_TX>,
+ // <&rp1_dma RP1_DMA_UART2_RX>;
+ // dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ arm,primecell-periphid = <0x00541011>;
+ uart-has-rtscts;
+ cts-event-workaround;
+ skip-init;
+ status = "disabled";
+ };
+
+ rp1_uart3: serial@3c000 {
+ compatible = "arm,pl011-axi";
+ reg = <0xc0 0x4003c000 0x0 0x100>;
+ interrupts = <RP1_INT_UART3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ clock-names = "uartclk", "apb_pclk";
+ // dmas = <&rp1_dma RP1_DMA_UART3_TX>,
+ // <&rp1_dma RP1_DMA_UART3_RX>;
+ // dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ arm,primecell-periphid = <0x00541011>;
+ uart-has-rtscts;
+ cts-event-workaround;
+ skip-init;
+ status = "disabled";
+ };
+
+ rp1_uart4: serial@40000 {
+ compatible = "arm,pl011-axi";
+ reg = <0xc0 0x40040000 0x0 0x100>;
+ interrupts = <RP1_INT_UART4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ clock-names = "uartclk", "apb_pclk";
+ // dmas = <&rp1_dma RP1_DMA_UART4_TX>,
+ // <&rp1_dma RP1_DMA_UART4_RX>;
+ // dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ arm,primecell-periphid = <0x00541011>;
+ uart-has-rtscts;
+ cts-event-workaround;
+ skip-init;
+ status = "disabled";
+ };
+
+ rp1_uart5: serial@44000 {
+ compatible = "arm,pl011-axi";
+ reg = <0xc0 0x40044000 0x0 0x100>;
+ interrupts = <RP1_INT_UART5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
+ clock-names = "uartclk", "apb_pclk";
+ // dmas = <&rp1_dma RP1_DMA_UART5_TX>,
+ // <&rp1_dma RP1_DMA_UART5_RX>;
+ // dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ arm,primecell-periphid = <0x00541011>;
+ uart-has-rtscts;
+ cts-event-workaround;
+ skip-init;
+ status = "disabled";
+ };
+
+ rp1_spi8: spi@4c000 {
+ reg = <0xc0 0x4004c000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ dmas = <&rp1_dma RP1_DMA_SPI8_TX>,
+ <&rp1_dma RP1_DMA_SPI8_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ rp1_spi0: spi@50000 {
+ reg = <0xc0 0x40050000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ dmas = <&rp1_dma RP1_DMA_SPI0_TX>,
+ <&rp1_dma RP1_DMA_SPI0_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ rp1_spi1: spi@54000 {
+ reg = <0xc0 0x40054000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ dmas = <&rp1_dma RP1_DMA_SPI1_TX>,
+ <&rp1_dma RP1_DMA_SPI1_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ rp1_spi2: spi@58000 {
+ reg = <0xc0 0x40058000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ dmas = <&rp1_dma RP1_DMA_SPI2_TX>,
+ <&rp1_dma RP1_DMA_SPI2_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ rp1_spi3: spi@5c000 {
+ reg = <0xc0 0x4005c000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ dmas = <&rp1_dma RP1_DMA_SPI3_TX>,
+ <&rp1_dma RP1_DMA_SPI3_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ // SPI4 is a target/slave interface
+ rp1_spi4: spi@60000 {
+ reg = <0xc0 0x40060000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ spi-slave;
+ dmas = <&rp1_dma RP1_DMA_SPI4_TX>,
+ <&rp1_dma RP1_DMA_SPI4_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+
+ slave {
+ compatible = "spidev";
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ rp1_spi5: spi@64000 {
+ reg = <0xc0 0x40064000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ dmas = <&rp1_dma RP1_DMA_SPI5_TX>,
+ <&rp1_dma RP1_DMA_SPI5_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ // SPI7 is a target/slave interface
+ rp1_spi7: spi@6c000 {
+ reg = <0xc0 0x4006c000 0x0 0x130>;
+ compatible = "snps,dw-apb-ssi";
+ interrupts = <RP1_INT_SPI7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ clock-names = "ssi_clk";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ spi-slave;
+ dmas = <&rp1_dma RP1_DMA_SPI7_TX>,
+ <&rp1_dma RP1_DMA_SPI7_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+
+ slave {
+ compatible = "spidev";
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ rp1_i2c0: i2c@70000 {
+ reg = <0xc0 0x40070000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_i2c1: i2c@74000 {
+ reg = <0xc0 0x40074000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_i2c2: i2c@78000 {
+ reg = <0xc0 0x40078000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_i2c3: i2c@7c000 {
+ reg = <0xc0 0x4007c000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_i2c4: i2c@80000 {
+ reg = <0xc0 0x40080000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_i2c5: i2c@84000 {
+ reg = <0xc0 0x40084000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_i2c6: i2c@88000 {
+ reg = <0xc0 0x40088000 0x0 0x1000>;
+ compatible = "snps,designware-i2c";
+ interrupts = <RP1_INT_I2C6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>;
+ status = "disabled";
+ };
+
+ rp1_pwm0: pwm@98000 {
+ compatible = "raspberrypi,rp1-pwm";
+ reg = <0xc0 0x40098000 0x0 0x100>;
+ #pwm-cells = <3>;
+ clocks = <&rp1_clocks RP1_CLK_PWM0>;
+ assigned-clocks = <&rp1_clocks RP1_CLK_PWM0>;
+ assigned-clock-rates = <6144000>;
+ status = "disabled";
+ };
+
+ rp1_pwm1: pwm@9c000 {
+ compatible = "raspberrypi,rp1-pwm";
+ reg = <0xc0 0x4009c000 0x0 0x100>;
+ #pwm-cells = <3>;
+ clocks = <&rp1_clocks RP1_CLK_PWM1>;
+ assigned-clocks = <&rp1_clocks RP1_CLK_PWM1>;
+ assigned-clock-rates = <6144000>;
+ status = "disabled";
+ };
+
+ rp1_i2s0: i2s@a0000 {
+ reg = <0xc0 0x400a0000 0x0 0x1000>;
+ compatible = "snps,designware-i2s";
+ // Providing an interrupt disables DMA
+ // interrupts = <RP1_INT_I2S0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_I2S>;
+ clock-names = "i2sclk";
+ #sound-dai-cells = <0>;
+ dmas = <&rp1_dma RP1_DMA_I2S0_TX>,<&rp1_dma RP1_DMA_I2S0_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ rp1_i2s1: i2s@a4000 {
+ reg = <0xc0 0x400a4000 0x0 0x1000>;
+ compatible = "snps,designware-i2s";
+ // Providing an interrupt disables DMA
+ // interrupts = <RP1_INT_I2S1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_I2S>;
+ clock-names = "i2sclk";
+ #sound-dai-cells = <0>;
+ dmas = <&rp1_dma RP1_DMA_I2S1_TX>,<&rp1_dma RP1_DMA_I2S1_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ rp1_i2s2: i2s@a8000 {
+ reg = <0xc0 0x400a8000 0x0 0x1000>;
+ compatible = "snps,designware-i2s";
+ // Providing an interrupt disables DMA
+ // interrupts = <RP1_INT_I2S2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_I2S>;
+ status = "disabled";
+ };
+
+ rp1_sdio_clk0: sdio_clk0@b0004 {
+ compatible = "raspberrypi,rp1-sdio-clk";
+ reg = <0xc0 0x400b0004 0x0 0x1c>;
+ clocks = <&sdio_src &sdhci_core>;
+ clock-names = "src", "base";
+ #clock-cells = <0>;
+ status = "disabled";
+ };
+
+ rp1_sdio_clk1: sdio_clk1@b4004 {
+ compatible = "raspberrypi,rp1-sdio-clk";
+ reg = <0xc0 0x400b4004 0x0 0x1c>;
+ clocks = <&sdio_src &sdhci_core>;
+ clock-names = "src", "base";
+ #clock-cells = <0>;
+ status = "disabled";
+ };
+
+ rp1_adc: adc@c8000 {
+ compatible = "raspberrypi,rp1-adc";
+ reg = <0xc0 0x400c8000 0x0 0x4000>;
+ clocks = <&rp1_clocks RP1_CLK_ADC>;
+ clock-names = "adcclk";
+ #clock-cells = <0>;
+ vref-supply = <&rp1_vdd_3v3>;
+ status = "disabled";
+ };
+
+ rp1_gpio: gpio@d0000 {
+ reg = <0xc0 0x400d0000 0x0 0xc000>,
+ <0xc0 0x400e0000 0x0 0xc000>,
+ <0xc0 0x400f0000 0x0 0xc000>;
+ compatible = "raspberrypi,rp1-gpio";
+ interrupts = <RP1_INT_IO_BANK0 IRQ_TYPE_LEVEL_HIGH>,
+ <RP1_INT_IO_BANK1 IRQ_TYPE_LEVEL_HIGH>,
+ <RP1_INT_IO_BANK2 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ rp1_uart0_14_15: rp1_uart0_14_15 {
+ pin_txd {
+ function = "uart0";
+ pins = "gpio14";
+ bias-disable;
+ };
+ pin_rxd {
+ function = "uart0";
+ pins = "gpio15";
+ bias-pull-up;
+ };
+ };
+ rp1_uart0_ctsrts_16_17: rp1_uart0_ctsrts_16_17 {
+ pin_cts {
+ function = "uart0";
+ pins = "gpio16";
+ bias-pull-up;
+ };
+ pin_rts {
+ function = "uart0";
+ pins = "gpio17";
+ bias-disable;
+ };
+ };
+ rp1_uart1_0_1: rp1_uart1_0_1 {
+ pin_txd {
+ function = "uart1";
+ pins = "gpio0";
+ bias-disable;
+ };
+ pin_rxd {
+ function = "uart1";
+ pins = "gpio1";
+ bias-pull-up;
+ };
+ };
+ rp1_uart1_ctsrts_2_3: rp1_uart1_ctsrts_2_3 {
+ pin_cts {
+ function = "uart1";
+ pins = "gpio2";
+ bias-pull-up;
+ };
+ pin_rts {
+ function = "uart1";
+ pins = "gpio3";
+ bias-disable;
+ };
+ };
+ rp1_uart2_4_5: rp1_uart2_4_5 {
+ pin_txd {
+ function = "uart2";
+ pins = "gpio4";
+ bias-disable;
+ };
+ pin_rxd {
+ function = "uart2";
+ pins = "gpio5";
+ bias-pull-up;
+ };
+ };
+ rp1_uart2_ctsrts_6_7: rp1_uart2_ctsrts_6_7 {
+ pin_cts {
+ function = "uart2";
+ pins = "gpio6";
+ bias-pull-up;
+ };
+ pin_rts {
+ function = "uart2";
+ pins = "gpio7";
+ bias-disable;
+ };
+ };
+ rp1_uart3_8_9: rp1_uart3_8_9 {
+ pin_txd {
+ function = "uart3";
+ pins = "gpio8";
+ bias-disable;
+ };
+ pin_rxd {
+ function = "uart3";
+ pins = "gpio9";
+ bias-pull-up;
+ };
+ };
+ rp1_uart3_ctsrts_10_11: rp1_uart3_ctsrts_10_11 {
+ pin_cts {
+ function = "uart3";
+ pins = "gpio10";
+ bias-pull-up;
+ };
+ pin_rts {
+ function = "uart3";
+ pins = "gpio11";
+ bias-disable;
+ };
+ };
+ rp1_uart4_12_13: rp1_uart4_12_13 {
+ pin_txd {
+ function = "uart4";
+ pins = "gpio12";
+ bias-disable;
+ };
+ pin_rxd {
+ function = "uart4";
+ pins = "gpio13";
+ bias-pull-up;
+ };
+ };
+ rp1_uart4_ctsrts_14_15: rp1_uart4_ctsrts_14_15 {
+ pin_cts {
+ function = "uart4";
+ pins = "gpio14";
+ bias-pull-up;
+ };
+ pin_rts {
+ function = "uart4";
+ pins = "gpio15";
+ bias-disable;
+ };
+ };
+
+ rp1_sdio0_22_27: rp1_sdio0_22_27 {
+ pin_clk {
+ function = "sd0";
+ pins = "gpio22";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+ pin_cmd {
+ function = "sd0";
+ pins = "gpio23";
+ bias-pull-up;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+ pins_dat {
+ function = "sd0";
+ pins = "gpio24", "gpio25", "gpio26", "gpio27";
+ bias-pull-up;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+ };
+
+ rp1_sdio1_28_33: rp1_sdio1_28_33 {
+ pin_clk {
+ function = "sd1";
+ pins = "gpio28";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+ pin_cmd {
+ function = "sd1";
+ pins = "gpio29";
+ bias-pull-up;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+ pins_dat {
+ function = "sd1";
+ pins = "gpio30", "gpio31", "gpio32", "gpio33";
+ bias-pull-up;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+ };
+
+ rp1_i2s0_18_21: rp1_i2s0_18_21 {
+ function = "i2s0";
+ pins = "gpio18", "gpio19", "gpio20", "gpio21";
+ bias-disable;
+ };
+
+ rp1_i2s1_18_21: rp1_i2s1_18_21 {
+ function = "i2s1";
+ pins = "gpio18", "gpio19", "gpio20", "gpio21";
+ bias-disable;
+ };
+
+ rp1_i2c4_34_35: rp1_i2c4_34_35 {
+ function = "i2c4";
+ pins = "gpio34", "gpio35";
+ bias-pull-up;
+ };
+ rp1_i2c6_38_39: rp1_i2c6_38_39 {
+ function = "i2c6";
+ pins = "gpio38", "gpio39";
+ bias-pull-up;
+ };
+ rp1_i2c4_40_41: rp1_i2c4_40_41 {
+ function = "i2c4";
+ pins = "gpio40", "gpio41";
+ bias-pull-up;
+ };
+ rp1_i2c5_44_45: rp1_i2c5_44_45 {
+ function = "i2c5";
+ pins = "gpio44", "gpio45";
+ bias-pull-up;
+ };
+ rp1_i2c0_0_1: rp1_i2c0_0_1 {
+ function = "i2c0";
+ pins = "gpio0", "gpio1";
+ bias-pull-up;
+ };
+ rp1_i2c0_8_9: rp1_i2c0_8_9 {
+ function = "i2c0";
+ pins = "gpio8", "gpio9";
+ bias-pull-up;
+ };
+ rp1_i2c1_2_3: rp1_i2c1_2_3 {
+ function = "i2c1";
+ pins = "gpio2", "gpio3";
+ bias-pull-up;
+ };
+ rp1_i2c1_10_11: rp1_i2c1_10_11 {
+ function = "i2c1";
+ pins = "gpio10", "gpio11";
+ bias-pull-up;
+ };
+ rp1_i2c2_4_5: rp1_i2c2_4_5 {
+ function = "i2c2";
+ pins = "gpio4", "gpio5";
+ bias-pull-up;
+ };
+ rp1_i2c2_12_13: rp1_i2c2_12_13 {
+ function = "i2c2";
+ pins = "gpio12", "gpio13";
+ bias-pull-up;
+ };
+ rp1_i2c3_6_7: rp1_i2c3_6_7 {
+ function = "i2c3";
+ pins = "gpio6", "gpio7";
+ bias-pull-up;
+ };
+ rp1_i2c3_14_15: rp1_i2c3_14_15 {
+ function = "i2c3";
+ pins = "gpio14", "gpio15";
+ bias-pull-up;
+ };
+ rp1_i2c3_22_23: rp1_i2c3_22_23 {
+ function = "i2c3";
+ pins = "gpio22", "gpio23";
+ bias-pull-up;
+ };
+
+ // DPI mappings with HSYNC,VSYNC but without PIXCLK,DE
+ rp1_dpi_16bit_gpio2: rp1_dpi_16bit_gpio2 { /* Mode 2, not fully supported by RP1 */
+ function = "dpi";
+ pins = "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9",
+ "gpio10", "gpio11", "gpio12", "gpio13",
+ "gpio14", "gpio15", "gpio16", "gpio17",
+ "gpio18", "gpio19";
+ bias-disable;
+ };
+ rp1_dpi_16bit_cpadhi_gpio2: rp1_dpi_16bit_cpadhi_gpio2 { /* Mode 3 */
+ function = "dpi";
+ pins = "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17",
+ "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24";
+ bias-disable;
+ };
+ rp1_dpi_16bit_pad666_gpio2: rp1_dpi_16bit_pad666_gpio2 { /* Mode 4 */
+ function = "dpi";
+ pins = "gpio2", "gpio3",
+ "gpio5", "gpio6", "gpio7", "gpio8",
+ "gpio9",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17",
+ "gpio21", "gpio22", "gpio23", "gpio24",
+ "gpio25";
+ bias-disable;
+ };
+ rp1_dpi_18bit_gpio2: rp1_dpi_18bit_gpio2 { /* Mode 5, not fully supported by RP1 */
+ function = "dpi";
+ pins = "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9",
+ "gpio10", "gpio11", "gpio12", "gpio13",
+ "gpio14", "gpio15", "gpio16", "gpio17",
+ "gpio18", "gpio19", "gpio20", "gpio21";
+ bias-disable;
+ };
+ rp1_dpi_18bit_cpadhi_gpio2: rp1_dpi_18bit_cpadhi_gpio2 { /* Mode 6 */
+ function = "dpi";
+ pins = "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17",
+ "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24", "gpio25";
+ bias-disable;
+ };
+ rp1_dpi_24bit_gpio2: rp1_dpi_24bit_gpio2 { /* Mode 7 */
+ function = "dpi";
+ pins = "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9",
+ "gpio10", "gpio11", "gpio12", "gpio13",
+ "gpio14", "gpio15", "gpio16", "gpio17",
+ "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25",
+ "gpio26", "gpio27";
+ bias-disable;
+ };
+ rp1_dpi_hvsync: rp1_dpi_hvsync { /* Sync only, for use with int VDAC */
+ function = "dpi";
+ pins = "gpio2", "gpio3";
+ bias-disable;
+ };
+
+ // More DPI mappings, including PIXCLK,DE on GPIOs 0,1
+ rp1_dpi_16bit_gpio0: rp1_dpi_16bit_gpio0 { /* Mode 2, not fully supported by RP1 */
+ function = "dpi";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17", "gpio18", "gpio19";
+ bias-disable;
+ };
+ rp1_dpi_16bit_cpadhi_gpio0: rp1_dpi_16bit_cpadhi_gpio0 { /* Mode 3 */
+ function = "dpi";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17",
+ "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24";
+ bias-disable;
+ };
+ rp1_dpi_16bit_pad666_gpio0: rp1_dpi_16bit_pad666_gpio0 { /* Mode 4 */
+ function = "dpi";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio5", "gpio6", "gpio7", "gpio8",
+ "gpio9",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17",
+ "gpio21", "gpio22", "gpio23", "gpio24",
+ "gpio25";
+ bias-disable;
+ };
+ rp1_dpi_18bit_gpio0: rp1_dpi_18bit_gpio0 { /* Mode 5, not fully supported by RP1 */
+ function = "dpi";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17", "gpio18", "gpio19",
+ "gpio20", "gpio21";
+ bias-disable;
+ };
+ rp1_dpi_18bit_cpadhi_gpio0: rp1_dpi_18bit_cpadhi_gpio0 { /* Mode 6 */
+ function = "dpi";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17",
+ "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24", "gpio25";
+ bias-disable;
+ };
+ rp1_dpi_24bit_gpio0: rp1_dpi_24bit_gpio0 { /* Mode 7 -- All GPIOs used! */
+ function = "dpi";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17", "gpio18", "gpio19",
+ "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24", "gpio25", "gpio26", "gpio27";
+ bias-disable;
+ };
+
+ rp1_pwm1_gpio45: rp1_pwm1_gpio45 {
+ function = "pwm1";
+ pins = "gpio45";
+ bias-pull-down;
+ };
+
+ rp1_spi0_gpio9: rp1_spi0_gpio9 {
+ function = "spi0";
+ pins = "gpio9", "gpio10", "gpio11";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi0_cs_gpio7: rp1_spi0_cs_gpio7 {
+ function = "spi0";
+ pins = "gpio7", "gpio8";
+ bias-pull-up;
+ };
+
+ rp1_spi1_gpio19: rp1_spi1_gpio19 {
+ function = "spi1";
+ pins = "gpio19", "gpio20", "gpio21";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi2_gpio1: rp1_spi2_gpio1 {
+ function = "spi2";
+ pins = "gpio1", "gpio2", "gpio3";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi3_gpio5: rp1_spi3_gpio5 {
+ function = "spi3";
+ pins = "gpio5", "gpio6", "gpio7";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi4_gpio9: rp1_spi4_gpio9 {
+ function = "spi4";
+ pins = "gpio9", "gpio10", "gpio11";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi5_gpio13: rp1_spi5_gpio13 {
+ function = "spi5";
+ pins = "gpio13", "gpio14", "gpio15";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi8_gpio49: rp1_spi8_gpio49 {
+ function = "spi8";
+ pins = "gpio49", "gpio50", "gpio51";
+ bias-disable;
+ drive-strength = <12>;
+ slew-rate = <1>;
+ };
+
+ rp1_spi8_cs_gpio52: rp1_spi8_cs_gpio52 {
+ function = "spi0";
+ pins = "gpio52", "gpio53";
+ bias-pull-up;
+ };
+ };
+
+ rp1_eth: ethernet@100000 {
+ reg = <0xc0 0x40100000 0x0 0x4000>;
+ compatible = "cdns,macb";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <RP1_INT_ETH IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&macb_pclk &macb_hclk &rp1_clocks RP1_CLK_ETH_TSU>;
+ clock-names = "pclk", "hclk", "tsu_clk";
+ phy-mode = "rgmii-id";
+ cdns,aw2w-max-pipe = /bits/ 8 <8>;
+ cdns,ar2r-max-pipe = /bits/ 8 <8>;
+ cdns,use-aw2b-fill;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ rp1_csi0: csi@110000 {
+ compatible = "raspberrypi,rp1-cfe";
+ reg = <0xc0 0x40110000 0x0 0x100>, // CSI2 DMA address
+ <0xc0 0x40114000 0x0 0x100>, // PHY/CSI Host address
+ <0xc0 0x40120000 0x0 0x100>, // MIPI CFG address
+ <0xc0 0x40124000 0x0 0x1000>; // PiSP FE address
+
+ // interrupts must match rp1_pisp_fe setup
+ interrupts = <RP1_INT_MIPI0 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>;
+ assigned-clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>;
+ assigned-clock-rates = <25000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rp1_csi1: csi@128000 {
+ compatible = "raspberrypi,rp1-cfe";
+ reg = <0xc0 0x40128000 0x0 0x100>, // CSI2 DMA address
+ <0xc0 0x4012c000 0x0 0x100>, // PHY/CSI Host address
+ <0xc0 0x40138000 0x0 0x100>, // MIPI CFG address
+ <0xc0 0x4013c000 0x0 0x1000>; // PiSP FE address
+
+ // interrupts must match rp1_pisp_fe setup
+ interrupts = <RP1_INT_MIPI1 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>;
+ assigned-clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>;
+ assigned-clock-rates = <25000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rp1_mmc0: mmc@180000 {
+ reg = <0xc0 0x40180000 0x0 0x100>;
+ compatible = "snps,dwcmshc-sdhci";
+ interrupts = <RP1_INT_SDIO0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS &sdhci_core
+ &rp1_clocks RP1_CLK_SDIO_TIMER
+ &rp1_sdio_clk0>;
+ clock-names = "bus", "core", "timeout", "sdio";
+ /* Bank 0 VDDIO is fixed */
+ no-1-8-v;
+ bus-width = <4>;
+ vmmc-supply = <&rp1_vdd_3v3>;
+ broken-cd;
+ status = "disabled";
+ };
+
+ rp1_mmc1: mmc@184000 {
+ reg = <0xc0 0x40184000 0x0 0x100>;
+ compatible = "snps,dwcmshc-sdhci";
+ interrupts = <RP1_INT_SDIO1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS &sdhci_core
+ &rp1_clocks RP1_CLK_SDIO_TIMER
+ &rp1_sdio_clk1>;
+ clock-names = "bus", "core", "timeout", "sdio";
+ bus-width = <4>;
+ vmmc-supply = <&rp1_vdd_3v3>;
+ /* Nerf SDR speeds */
+ sdhci-caps-mask = <0x3 0x0>;
+ broken-cd;
+ status = "disabled";
+ };
+
+ rp1_dma: dma@188000 {
+ reg = <0xc0 0x40188000 0x0 0x1000>;
+ compatible = "snps,axi-dma-1.01a";
+ interrupts = <RP1_INT_DMA IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_core &rp1_clocks RP1_CLK_SYS>;
+ clock-names = "core-clk", "cfgr-clk";
+
+ #dma-cells = <1>;
+ dma-channels = <8>;
+ snps,dma-masters = <1>;
+ snps,dma-targets = <64>;
+ snps,data-width = <4>; // (8 << 4) == 128 bits
+ snps,block-size = <0x40000 0x40000 0x40000 0x40000 0x40000 0x40000 0x40000 0x40000>;
+ snps,priority = <0 1 2 3 4 5 6 7>;
+ snps,axi-max-burst-len = <8>;
+ status = "disabled";
+ };
+
+ rp1_usb0: usb@200000 {
+ reg = <0xc0 0x40200000 0x0 0x100000>;
+ compatible = "snps,dwc3";
+ dr_mode = "host";
+ usb3-lpm-capable;
+ snps,axi-pipe-limit = /bits/ 8 <8>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,tx-max-burst-prd = <8>;
+ snps,tx-thr-num-pkt-prd = <2>;
+ interrupts = <RP1_INT_USBHOST0_0 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ rp1_usb1: usb@300000 {
+ reg = <0xc0 0x40300000 0x0 0x100000>;
+ compatible = "snps,dwc3";
+ dr_mode = "host";
+ usb3-lpm-capable;
+ snps,axi-pipe-limit = /bits/ 8 <8>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,tx-max-burst-prd = <8>;
+ snps,tx-thr-num-pkt-prd = <2>;
+ interrupts = <RP1_INT_USBHOST1_0 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ rp1_dsi0: dsi@110000 {
+ compatible = "raspberrypi,rp1dsi";
+ status = "disabled";
+ reg = <0xc0 0x40118000 0x0 0x1000>, // MIPI0 DSI DMA (ArgonDPI)
+ <0xc0 0x4011c000 0x0 0x1000>, // MIPI0 DSI Host (SNPS)
+ <0xc0 0x40120000 0x0 0x1000>; // MIPI0 CFG
+
+ interrupts = <RP1_INT_MIPI0 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>, // required, config bus clock
+ <&rp1_clocks RP1_CLK_MIPI0_DPI>, // required, pixel clock
+ <&clksrc_mipi0_dsi_byteclk>, // internal, parent for divide
+ <&clk_xosc>; // hardwired to DSI "refclk"
+ clock-names = "cfgclk", "dpiclk", "byteclk", "refclk";
+
+ assigned-clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>,
+ <&rp1_clocks RP1_CLK_MIPI0_DPI>;
+ assigned-clock-rates = <25000000>;
+ assigned-clock-parents = <0>, <&clksrc_mipi0_dsi_byteclk>;
+ };
+
+ rp1_dsi1: dsi@128000 {
+ compatible = "raspberrypi,rp1dsi";
+ status = "disabled";
+ reg = <0xc0 0x40130000 0x0 0x1000>, // MIPI1 DSI DMA (ArgonDPI)
+ <0xc0 0x40134000 0x0 0x1000>, // MIPI1 DSI Host (SNPS)
+ <0xc0 0x40138000 0x0 0x1000>; // MIPI1 CFG
+
+ interrupts = <RP1_INT_MIPI1 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>, // required, config bus clock
+ <&rp1_clocks RP1_CLK_MIPI1_DPI>, // required, pixel clock
+ <&clksrc_mipi1_dsi_byteclk>, // internal, parent for divide
+ <&clk_xosc>; // hardwired to DSI "refclk"
+ clock-names = "cfgclk", "dpiclk", "byteclk", "refclk";
+
+ assigned-clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>,
+ <&rp1_clocks RP1_CLK_MIPI1_DPI>;
+ assigned-clock-rates = <25000000>;
+ assigned-clock-parents = <0>, <&clksrc_mipi1_dsi_byteclk>;
+ };
+
+ /* VEC and DPI both need to control PLL_VIDEO and cannot work together; */
+ /* config.txt should enable one or other using dtparam=vec or an overlay. */
+ rp1_vec: vec@144000 {
+ compatible = "raspberrypi,rp1vec";
+ status = "disabled";
+ reg = <0xc0 0x40144000 0x0 0x1000>, // VIDEO_OUT_VEC
+ <0xc0 0x40140000 0x0 0x1000>; // VIDEO_OUT_CFG
+
+ interrupts = <RP1_INT_VIDEO_OUT IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rp1_clocks RP1_CLK_VEC>;
+
+ assigned-clocks = <&rp1_clocks RP1_PLL_VIDEO_CORE>,
+ <&rp1_clocks RP1_PLL_VIDEO_SEC>,
+ <&rp1_clocks RP1_CLK_VEC>;
+ assigned-clock-rates = <1188000000>,
+ <108000000>,
+ <108000000>;
+ assigned-clock-parents = <0>,
+ <&rp1_clocks RP1_PLL_VIDEO_CORE>,
+ <&rp1_clocks RP1_PLL_VIDEO_SEC>;
+ };
+
+ rp1_dpi: dpi@148000 {
+ compatible = "raspberrypi,rp1dpi";
+ status = "disabled";
+ reg = <0xc0 0x40148000 0x0 0x1000>, // VIDEO_OUT DPI
+ <0xc0 0x40140000 0x0 0x1000>; // VIDEO_OUT_CFG
+
+ interrupts = <RP1_INT_VIDEO_OUT IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rp1_clocks RP1_CLK_DPI>, // DPI pixel clock
+ <&rp1_clocks RP1_PLL_VIDEO>, // PLL primary divider, and
+ <&rp1_clocks RP1_PLL_VIDEO_CORE>; // VCO, which we also control
+ clock-names = "dpiclk", "plldiv", "pllcore";
+
+ assigned-clocks = <&rp1_clocks RP1_CLK_DPI>;
+ assigned-clock-parents = <&rp1_clocks RP1_PLL_VIDEO>;
+ };
+ };
+};
+
+&clocks {
+ clk_xosc: clk_xosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "xosc";
+ clock-frequency = <50000000>;
+ };
+ macb_pclk: macb_pclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "pclk";
+ clock-frequency = <200000000>;
+ };
+ macb_hclk: macb_hclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "hclk";
+ clock-frequency = <200000000>;
+ };
+ sdio_src: sdio_src {
+ // 400 MHz on FPGA. PLL sys VCO on asic
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "src";
+ clock-frequency = <1000000000>;
+ };
+ sdhci_core: sdhci_core {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "core";
+ clock-frequency = <50000000>;
+ };
+ clksrc_mipi0_dsi_byteclk: clksrc_mipi0_dsi_byteclk {
+ // This clock is synthesized by MIPI0 D-PHY, when DSI is running.
+ // Its frequency is not known a priori (until a panel driver attaches)
+ // so assign a made-up frequency of 72MHz so it can be divided for DPI.
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "clksrc_mipi0_dsi_byteclk";
+ clock-frequency = <72000000>;
+ };
+ clksrc_mipi1_dsi_byteclk: clksrc_mipi1_dsi_byteclk {
+ // This clock is synthesized by MIPI1 D-PHY, when DSI is running.
+ // Its frequency is not known a priori (until a panel driver attaches)
+ // so assign a made-up frequency of 72MHz so it can be divided for DPI.
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "clksrc_mipi1_dsi_byteclk";
+ clock-frequency = <72000000>;
+ };
+};
+
+/ {
+ rp1_vdd_3v3: rp1_vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rp
dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4s.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2712-rpi-5-b.dtb
subdir-y += bcmbca
subdir-y += northstar2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -0,0 +1 @@
+#include "../../../../arm/boot/dts/bcm2712-rpi-5-b.dts"
Reference in a new issue View git blame Copy permalink