Reproducer:
$ ksh -c 'unset PWD; (cd /); :'
Memory fault
The shell crashes because b_cd() is testing the value of the PWD
variable without checking if there is one.
src/cmd/ksh93/sh/path.c: path_pwd():
- Never return an unfreeable pointer to e_dot; always return a
freeable pointer. This fixes another corner-case crashing bug.
- Make sure the PWD variable gets assigned a value if it doesn't
have one, even if it's the "." fallback. However, if the PWD is
inaccessible but we did inherit a $PWD value that starts with a
/, then use the existing $PWD value as this will help the shell
fail gracefully.
src/cmd/ksh93/bltins/cd_pwd.c:
- b_cd(): When checking if the PWD is valid, use the sh.pwd copy
instead of the PWD variable. This fixes the crash above.
- b_cd(): Since path_pwd() now always returns a freeable value,
free sh.pwd unconditionally before setting the new value.
- b_pwd(): Not only check that path_pwd() returns a value starting
with a slash, but also verify it with test_inode() and error out
if it's wrong. This makes the 'pwd' command useful for checking
that the PWD is currently accessible.
src/cmd/ksh93/data/msg.c:
- Change e_pwd error message for accuracy and clarity.
This backports two minor additions to the 'read' built-in from ksh
93v-: '-a' is now the same as '-A' and '-u p' is the same as '-p'.
This is for compatibility with some 93v- or ksh2020 scripts.
Note that their change to the '-p' option to support both prompts
and reading from the coprocess was *not* backported because we
found it to be broken and unfixable. Discussoin at:
https://github.com/ksh93/ksh/issues/463
src/cmd/ksh93/bltins/read.c: b_read():
- Backport as described above.
- Rename the misleadingly named 'name' variable to 'prompt'.
It points to the prompt string, not to a variable name.
src/cmd/ksh93/data/builtins.c: sh_optpwd[]:
- Add -a as an alterative to -A. All that is needed is adding '|a'
and optget(3) will automatically convert it to 'A'.
- Change -u from a '#' (numeric) to ':' option to support 'p'. Note
that b_read() now needs a corresponding strtol() to convert file
descriptor strings to numbers where applicable.
- Tweaks.
src/cmd/ksh93/sh.1:
- Update accordingly.
- Tidy up the unreadable mess that was the 'read' documentation.
The options are now shown in a list.
From README:
FILESCAN on Experimental option that allows fast reading of files
using while < file;do ...; done and allowing fields in
each line to be accessed as positional parameters.
As SHOPT_FILESCAN has been enabled by default since ksh 93l
2001-06-01, the filescan loop is now documented in the manual page
and the compile-time option is no longer considered experimental.
We must disable this at runtime if --posix is active because it
breaks a portable use case: POSIXly, 'while <file; do stuff; done'
repeatedly excutes 'stuff' while 'file' can successfully be opened
for reading, without actually reading from 'file'.
This also backports a bugfix from the 93v- beta. Reproducer:
$ echo 'one two three' >foo
$ while <foo; do printf '[%s] ' "$@"; echo; done
[one two three]
Expected output:
[one] [two] [three]
The bug is that "$@" acts like "$*", joining all the positional
parameters into one word though it should be generating one word
for each.
src/cmd/ksh93/sh/macro.c: varsub():
- Backport fix for the bug described above. I do not understand the
opaque macro.c code well enough yet to usefully describe the fix.
src/cmd/ksh93/sh/xec.c: sh_exec():
- Improved sanity check for filescan loop: do not recognise it if
the simple command includes variable assignments, more than one
redirection, or an output or append redirection.
- Disable filescan loops if --posix is active.
- Another 93v- fix: handle interrupts (errno==EINTR) when closing
the input file.
In UTF-8 locales, ksh breaks when a KEYBD trap is active, even a
dummy no-op one like 'trap : KEYBD'. Entering multi-byte characters
fails (the input is interrupted and a new prompt is displayed) and
pasting content with multi-byte characters produces corrupted
results.
The cause is that the KEYBD trap code is not multibyte-ready.
Unfortunately nobody yet understands the edit.c code well enough
to implement a proper fix. Pending that, this commit implements
a workaround that at least avoids breaking the shell.
src/cmd/ksh93/edit/edit.c: ed_getchar():
- When a multi-byte locale is active, do not trigger the the KEYBD
trap except for ASCII characters (1-127).
Resolves: https://github.com/ksh93/ksh/issues/307
The -f/--noglob shell option is documented simply as: "Disables
pathname expansion." But after 'set -f' on an interactive shell,
command completion and file name completion also stop working. This
is because they internally use the pathname expansion mechanism.
But it is not documented anywhere that 'set -f' disables
completion; it's just a side effect of an implementation detail.
Though ksh has always acted like this, I think it should change
because it's not useful or expected behaviour. Other shells like
bash, yash or zsh don't act like this.
src/cmd/ksh93/sh/expand.c,
src/cmd/ksh93/sh/macro.c:
- Allow the SH_COMPLETE (command completion) or SH_FCOMPLETE
(file name completion) state bit to override SH_NOGLOB in
path_generate() and in sh_macexpand().
Reproducer:
exec 9>&1
( { exec 9>&1; } 9>&- )
echo "test" >&9 # => 9: cannot open [Bad file descriptor]
The 9>&- incorrectly persists beyond the { } block that it
was attached to *and* beyond the ( ) subshell. This is yet another
bug with non-forking subshells; forking it with something like
'ulimit -t unlimited' works around the bug.
In over a year we have not been able to find a real fix, but I came
up with a workaround that forks a virtual subshell whenever it
executes a code block with a >&- or <&- redirection attached. That
use case is obscure enough that it should not cause any performance
regression except in very rare corner cases.
src/cmd/ksh93/sh/xec.c: sh_exec(): TSETIO:
- This is where redirections attached to code blocks are handled.
Check for a >&- or <&- redirection using bit flaggery from
shnodes.h and fork if we're executing such in a virtual subshell.
Resolves: https://github.com/ksh93/ksh/issues/161
Thanks to @ko1nksm for the bug report.
This commit backports all of the relevant .sh.match bugfixes from
ksh93v-. Most of the .sh.match rewrite is from versions 2012-08-24
and 2012-10-04, with patches from later releases of 93v- and
ksh2020 also applied. Note that there are still some remaining bugs
in .sh.match, although now the total count of .sh.match bugs should
be less that before.
These are the relevant changes in the ksh93v- changelog that were
backported:
12-08-07 .sh.match no longer gets set for patterns in PS4 during
set -x.
12-08-10 Rewrote .sh.match expansions fixing several bugs and
improving performance.
12-08-22 .sh.match now handles subpatterns that had no matches with
${var//pattern} correctly.
12-08-21 A bug in setting .sh.match after ${var//pattern/string}
when string is empty has been fixed.
12-08-21 A bug in setting .sh.match after [[ string == pattern ]]
has been fixed.
12-08-31 A bug that could cause a core dump after
typeset -m var=.sh.match has been fixed.
12-09-10 Fixed a bug in typeset -m the .sh.match is being renamed.
12-09-07 Fixed a bug in .sh.match code that coud cause the shell
to quitely
13-02-21 The 12-01-16 bug fix prevented .sh.match from being used
in the replacement string. The previous code was restored
and a different fix which prevented .sh.match from being
computed for nested replacement has been used instead.
13-05-28 Fixed two bug for typeset -c and typeset -m for variable
.sh.match.
Changes:
- The SHOPT_2DMATCH option has been removed. This was already the
default behavior previously, and now it's documented in the man
page.
- init.c: Backported the sh_setmatch() rewrite from 93v- 2012-08-24
and 2012-10-04.
- Backported the libast 93v- strngrpmatch() function, as the
.sh.match rewrite requires this API.
- Backported the sh_match regression tests from ksh93v-, with many
other sh_match tests backported from ksh2020. Much of the sh_match
script is based on code from Roland Mainz:
https://marc.info/?l=ast-developers&m=134606574109162&w=2https://marc.info/?l=ast-developers&m=134490505607093
- tests/{substring,treemove}.sh: Backported other relevant .sh.match
fixes, with tests added to the substring and treemove test scripts.
- tests/types.sh: One of the (now reverted) memory leak bugfixes
introduced a CI test failure in this script, so for that test the
error message has been improved.
- string/strmatch.c: The original ksh93v- code for the strngrpmatch()
changes introduced a crash that could occur because strlen would
be used on a null pointer. This has been fixed by avoiding strlen
if the string is null.
One nice side effect of these changes is a considerable performance
improvement in the shbench[1] gsub benchmark (results from 20
iterations with CCFLAGS=-Os):
--------------------------------------------------
name /tmp/ksh-current /tmp/ksh-matchfixes
--------------------------------------------------
gsub.ksh 0.883 [0.822-0.959] 0.457 [0.442-0.505]
--------------------------------------------------
Despite all of the many fixes and improvements in the backported
93v- .sh.match code, there are a few remaining bugs:
- .sh.match is printed with a default [0] subscript (see also
https://github.com/ksh93/ksh/issues/308#issuecomment-1025016088):
$ arch/*/bin/ksh -c 'echo ${!.sh.match}'
.sh.match[0]
This bug appears to have been introduced by the changes from
ksh93v- 2012-08-24.
- The wrong variable name is given for 'parameter not set' errors
(from https://marc.info/?l=ast-developers&m=134489094602596):
$ arch/*/bin/ksh -u
$ x=1234
$ true "${x//~(X)([012])|([345])/}"
$ compound co
$ typeset -m co.array=.sh.match
$ printf "%q\n" "${co.array[2][0]}"
arch/linux.i386-64/bin/ksh: co.array[2][(null)]: parameter not set
- .sh.match leaks out of subshells. Further information and a
reproducer can be found here:
https://marc.info/?l=ast-developers&m=136292897330187
[1]: https://github.com/ksh-community/shbench
When executing a script without a hashbang path like #!/bin/ksh,
ksh forks itself, longjmps back to sh_main(), and then (among other
things) calling sh_reinit() which is the function that tries to
reinitialise as much of the shell as it can. This is its way of
ensuring the child script is run in ksh and not some other shell.
However, this appraoch is incredibly buggy. Among other things,
changes in built-in commands and custom type definitions survived
the reinitialisation, "exporting" variables didn't work properly,
and the hash table and ${.sh.stats} weren't reset. As a result,
depending on what the invoking script did, the invoked script could
easily fail or malfunction.
It is not actually possible to reinitialise the shell correctly,
because some of the shell state is in locally scoped static
variables that cannot simply be reinitialised. There are probably
huge memory leaks with this approach as well. At some point, all
this is going to need a total redesign. Clearly, the only reliable
way involves execve(2) and a start from scratch.
For now though, this seems to fix the known bugs at least. I'm sure
there are more to be discovered.
This commit makes another change: instead of the -h/trackall option
(which has been a no-op for decades), the posix option is now
inherited by the child script. Since there is no hashbang path from
which to decide whether the shell should run in POSIX mode nor not,
the best guess is probably the invoking script's setting.
src/cmd/ksh93/sh/init.c: sh_reinit():
- Keep the SH_INIT state on during the entire procedure.
- Delete remaining non-exported, non-default variables.
- Remove attributes from exported variables. In POSIX mode, remove
all attributes; otherwise, only remove readonly.
- Unset discipline function pointers for variables.
- Delete all custom types.
- Delete all functions and built-ins, then reinitialise the built-ins
table from scatch.
- Free the alias values before clearing the alias table.
- Same with hash table entries (tracked aliases).
- Reset statistics.
- Inherit SH_POSIX instead of SH_TRACKALL.
- Call user init function last, not somewhere in the middle.
src/cmd/ksh93/sh/name.c: sh_envnolocal():
- Be sure to preserve the export attribute of kept variables.
Resolves: https://github.com/ksh93/ksh/issues/350
This bugfix was backported from ksh93v- 2012-10-04. The bug fixed
by this change is one that causes 'typeset -p' to omit the -C flag
when listing compound arrays belonging to a type:
$ typeset -T Foo_t=(compound -a bar)
$ Foo_t baz
$ typeset -p baz.bar
typeset -a baz.bar='' # This should be 'typeset -C -a'
src/cmd/ksh93/sh/nvtype.c:
- Backport change from 93v- 2012-10-04 that sets the array nvalue to
a pointer named Null (which is "") in nv_mktype(), then to Empty
in fixnode().
- Change the Null name from the 93v- code to AltEmpty to avoid
misleading code readers into thinking that it's a null pointer.
src/cmd/ksh93/tests/types.sh:
- Backport the relevant 93v- changes to the types regression tests.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
In ksh93v- 2012-10-04 the following bugfix is noted in the changelog
(this fix was most likely part of ksh93v- 2012-09-27, although that
version is not archived anywhere):
12-09-21 A bug in which the output of a two dimensional sparse
indexed array would cause the second subscript be treated
as an associative array when read back in has been fixed.
Elements that are sparse indexed arrays now are prefixed
type "typeset -a".
Below is a before and after of this change:
# Before
$ typeset -a foo[1][2]=bar
$ typeset -p foo
typeset -a foo=([1]=([2]=bar) )
# After
$ typeset -a foo[1][2]=bar
$ typeset -p foo
typeset -a foo=(typeset -a [1]=([2]=bar) )
src/cmd/ksh93/sh/*.c:
- Backport changes from ksh93v- to print 'typeset -a' before sparse
indexed arrays and properly handle 'typeset -a' in reinput
commands from 'typeset -p'.
src/cmd/ksh93/tests:
- Add two regression tests to arrays.sh for this change.
- Update the existing regression tests for compatibility with the
new printed typeset output.
Special builtins are undeleteable for a reason. But 'enum' and
'typeset -T' allow overriding them, causing an inconsistent state.
@JohnoKing writes:
| The behavior is rather buggy, as it appears to successfully
| override normal builtins but fails to delete the special
| builtins, leading to scenarios where both the original builtin
| and type are run:
|
| $ typeset -T eval=(typeset BAD; typeset TYPE) # This should have failed
| $ eval foo=BAD
| /usr/bin/ksh: eval: line 1: foo: not found
| $ enum trap=(BAD TYPE) # This also should have failed
| $ trap foo=BAD
| /usr/bin/ksh: trap: condition(s) required
| $ enum umask=(BAD TYPE)
| $ umask foo=BAD
| $ echo $foo
| BAD
|
| # Examples of general bugginess
| $ trap bar=TYPE
| /usr/bin/ksh: trap: condition(s) required
| $ echo $bar
| TYPE
| $ eval var=TYPE
| /usr/bin/ksh: eval: line 1: var: not found
| $ echo $var
| TYPE
This commit fixes the following:
The 'enum' and 'typeset -T' commands are no longer allowed to
override and replace special built-in commands, except for type
definition commands previously created by these commands; these
are already (dis)allowed elsewhere.
A command like 'typeset -T foo_t' without any assignments no longer
creates an incompletely defined 'foo_t' built-in comamnd. Instead,
it is now silently ignored for backwards compatibility. This did
have a regression test checking for it, but I'm changing it because
that's just not a valid use case. An incomplete type definition
command does nothing useful and only crashes the shell when run.
src/cmd/ksh93/bltins/enum.c: b_enum():
- Do not allow overriding non-type special built-ins.
src/cmd/ksh93/sh/name.c: nv_setlist():
- Do not allow 'typeset -T' to override non-type special built-ins.
To avoid an inconsistent state, this must be checked for while
processing the assignments list before typeset is really invoked.
src/cmd/ksh93/bltins_typeset.c: b_typeset():
- Only create a type command if sh.envlist is set, i.e., if some
shell assignment(s) were passed to the 'typeset -T' command.
Progresses: https://github.com/ksh93/ksh/issues/350
$ unset foo
$ echo ${foo[42]=bar}
(empty line)
Instead of the empty line, 'bar' was expected. As foo[42] was
unset, the conditional assignment should have worked.
$ unset foo
$ : ${foo[42]?error: unset}
(no output)
The expansion should have thrown an error with the given message.
This bug was introduced in ksh 93t 2008-10-01. Thanks to @JohnoKing
for finding the breaking change.
Analysis: The problem was experimenally determined to be in in the
following lines of nv_putsub(). If the array member is unset (i.e.
null), the value is set to the empty string instead:
src/cmd/ksh93/sh/array.c
1250: else
1251: ap->val[size].cp = Empty;
It makes some sense: if there is a value (even an empty one), the
variable is set and these expansions should behave accordingly.
Sure enough, deleting these lines fixes the bug, but at the expense
of introducing a lot of other array-related regressions. So we need
a way to special-case the affected expansions.
Where to do this? If we replace line 1251 with an abort(3) call, we
get this stack trace:
0 libsystem_kernel.dylib __pthread_kill + 10
1 libsystem_pthread.dylib pthread_kill + 284
2 libsystem_c.dylib abort + 127
3 ksh nv_putsub + 1411 (array.c:1255)
4 ksh nv_endsubscript + 940 (array.c:1547)
5 ksh nv_create + 4732 (name.c:1066)
6 ksh nv_open + 1951 (name.c:1425)
7 ksh varsub + 4934 (macro.c:1322)
[rest omitted]
The special-casing needs to be done on line 1250 of array.c, but
flagged in varsub() which processes these expansions. So, varsub()
calls nv_open() calls nv_create() calls nv_endsubscript() calls
nv_putsub(). That's a fairly deep call stack, so passing an extra
flag argument does not seem doable. I did try an approach using a
couple of new bit flags passed via these functions' flags and mode
parameters, but the way this code base uses bit flags is so
intricate, it does not seem to be possible to add or change
anything without unwanted side effects in all sorts of places.
So the only fix I can think of adds yet another global flag
variable for a very special case. It's ugly, but it works.
An elegant fix would probably involve a fairly comprehensive
redesign, which is simply not going to happen.
src/cmd/ksh93/include/shell.h:
- Add global sh.cond_expan flag.
src/cmd/ksh93/sh/array.c: nv_putsub():
- Do not set value to empty string if sh.cond_expan is set.
src/cmd/ksh93/sh/macro.c: varsub():
- Set sh.cond_expan flag while calling nv_open() for one of the
affected expansions.
- Minor refactoring for legibility and to make the fix fit better.
- SSOT: Instead of repeating string "REPLY", use the node's nvname.
- Do not pointlessly add an extra 0 byte when saving id for error
message; sfstruse() already adds this.
Thanks to @oguz-ismail for the bug report.
Resolves: https://github.com/ksh93/ksh/issues/383
Variables with a dot in their name, such as those declared in
namespace { ... } blocks, are usually stored in a separate tree
with their actual names not containing any dots. But under some
circumstances, including at least direct assignment of a
non-preexisting dot variable, dot variables are stored in the main
sh.var_tree with names actually containing dots. With allexport
active, those could end up exported to the environment. This bug
was also present in previous release versions of ksh.
src/cmd/ksh93/sh/name.c: pushnam():
- Check for a dot in the name before pushing a variable to export.
This fix was backported from ksh 93v- 2012-10-04.
src/cmd/ksh93/sh/nvtree.c: nv_outnode():
- If the array is supposed to be empty, do not continue. This
avoids outputting a nonexistent [0]= element for empty arrays.
Resolves: https://github.com/ksh93/ksh/issues/420
Co-authored-by: Martijn Dekker <martijn@inlv.org>
This commit adds a fix for the trap command, backported from a fork
of ksh2020: https://github.com/l0stman/ksh/commit/2033375f
src/cmd/ksh93/sh/jobs.c: job_chldtrap():
- Fixed a use after free bug in the for loop. The string pointed to
by sh.st.trapcom[SIGCHLD] may be freed from memory after
sh_trap(), so it must be reobtained each time sh_trap() is called
from within the for loop.
All variables that are assigned a value should be exported while
the allexport shell option is enabled. This works in most cases,
but variables assigned to with ${var:=foo} or $((var=123)) aren't
exported while allexport is on.
src/cmd/ksh93/sh/name.c:
- nv_putval(): This is the central assignment function; all forms
of variable assignment end up here. So this is the best place
to check for SH_ALLEXPORT and turn on the export attribute.
- nv_setlist(): Remove allexport handling, now redundant.
src/cmd/ksh93/bltins/read.c: sh_readline():
- Remove allexport handling, now redundant.
src/cmd/ksh93/sh/main.c: sh_main():
- nv_putval() is used to initialize PS4 and IFS using nv_putval();
this is after an -a/--allexport specified on the ksh command
line has been processed, so temporarily turn that off.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
If the VISUAL or EDITOR environment variable is not set to a value
matching *[Vv][Ii]* or *macs* at initialisation time, then ksh does
not turn on any line editor.
This is user-hostile. New users on Unix-like systems typically have
a simple editor like nano preconfigured as their default, or may
not have the VISUAL or EDITOR variable set at all. So if they try
ksh, they find themselves without basic functionality such as arrow
keys and probably go straight back to bash.
The emacs line editor is by far the most widely used, especially
among new users, so ksh should default to that. Most other shells
already do this.
src/cmd/ksh93/sh/main.c: sh_main():
- On an interactive shell, if on editor was turned on based on
$VISUAL or $EDITOR, turn on emacs before reading input.
Reproducer:
$ ksh -c 'bash -c '\''kill -s INT $$'\''; echo "$?, continuing"'
Expected result: output "258, continuing"; exit status 0.
Actual result: no output; exit status 258. The child process sent
SIGINT only to itself and not to the process group, so the parent
script was wrongly interrupted.
Every shell except ksh93 produces the expected result. ksh93 also
gave the expected result before version 2008-01-31 93s+, which
introduced the code below.
Analysis: The problem is in these lines of code in xec.c,
sh_exec(), TFORK case, parent branch of fork:
1649: if(!sh_isstate(SH_MONITOR))
1650: {
1651: if(!(sh.sigflag[SIGINT]&(SH_SIGFAULT|SH_SIGOFF)))
1652: sh_sigtrap(SIGINT);
1653: sh.trapnote |= SH_SIGIGNORE;
1654: }
[...pipe and I/O handling, wait for command to finish...]
1667: if(!sh_isstate(SH_MONITOR))
1668: {
1669: sh.trapnote &= ~SH_SIGIGNORE;
1700: if(sh.exitval == (SH_EXITSIG|SIGINT))
1701: kill(sh.current_pid,SIGINT);
1702: }
When a user presses Ctrl+C, SIGINT is sent to the entire process
group. If job control is fully off (i.e., !sh_isstate(SH_MONITOR)),
then the process group includes the parent script. Therefore, in a
script such as
$ ksh -c 'bash -c '\''read x'\''; echo "$?, continuing"'
when the user presses Ctrl+C while bash waits for 'read x' input,
the parent ksh script should be interrupted as well.
Now, the code above ignores SIGINT while bash is running. (This is
done using special-casing in sh_fault() to handle that SH_SIGIGNORE
flag for SIGINT.) So, when Ctrl+C interrupts the process group, the
parent script is not getting interrupted as it should.
To compensate for that, the code then detects, using sh.exitval
(the child process' exit status), whether the child process was
killed by SIGINT. If so, it simply assumes that the signal was
meant for the process group including the parent script, so it
reissues SIGINT to itself after unignoring it.
But, as we can see from the broken reproducer above, that
assumption is not valid. Scripts are perfectly free to send SIGINT
to themselves only, and that must work as expected.
src/cmd/ksh93/sh/xec.c: sh_exec(): TFORK: parent branch:
- Instead of ignoring SIGINT, sigblock() it, which delays handling
the signal until sigrelease(). (Note that these are macros
defined in src/cmd/ksh93/features/sigfeatures according to OS
capabilities.)
- This makes reissuing SIGINT redundant, so delete that, which
fixes the bug.
src/cmd/ksh93/sh/fault.c:
- Nothing now sets the SH_SIGIGNORE flag in sh.trapnote, so remove
special-casing added in 2008-01-31 93s+.
Add extra key bindings to the emacs and vi modes
This patch adds the following key bindings to the emacs and vi
editing modes:
- Support for Home key sequences ^[[1~ and ^[[7~ as well as End key
sequences ^[[4~ and ^[[8~.
- Support for arrow key sequences ^[OA, ^[OB, ^[OC and ^[OD.
- Support for the following keyboard shortcuts (if the platform
supports the expected escape sequence):
- Ctrl-Left Arrow: Go back one word
- Alt-Left Arrow: Go back one word (Not supported on Haiku)
- Ctrl-Right Arrow: Go forward one word
- Alt-Right Arrow: Go forward one word (Not supported on Haiku)
- Ctrl-G: Cancel reverse search
- Ctrl-Delete: Delete next word (Not supported on Haiku)
- Added a key binding for the Insert key, which differs in the
emacs and vi editing modes:
- In emacs mode, Insert escapes the next character.
- In vi mode, Insert will switch the editor to insert mode (like
in vim).
src/cmd/ksh93/edit/{emacs,vi}.c:
- Add support for the <M-Left> and <M-Right> sequences. Like in
bash and mksh, these shortcuts move the cursor one word backward
or forward (like the <Ctrl-Left> and <Ctrl-Right> shortcuts).
- Only attempt to process these shortcuts if the escape sequence
begins with $'\E[1;'.
src/cmd/ksh93/edit/vi.c:
- If the shell isn't doing a reverse search, insert the bell
character when Ctrl+G is input.
- Add the Ctrl-Delete shortcut as an alias of 'dw'. Calling
ed_ungetchar twice does not work for 'dw', so Ctrl-Delete was
implemented by using a vp->del_word variable.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
Currently, running ksh under ASan without the ASAN_OPTIONS variable
set to 'detect_leaks=0' usually ends with ASan complaining about a
memory leak in defpathinit() (this leak doesn't grow in a loop, so
no regression test was added to leaks.sh). Reproducer:
$ ENV=/dev/null arch/*/bin/ksh
$ cp -?
cp: invalid option -- '?'
Try 'cp --help' for more information.
$ exit
=================================================================
==225132==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 85 byte(s) in 1 object(s) allocated from:
#0 0x7f6dab42d459 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x5647b77fe144 in sh_calloc /home/johno/GitRepos/KornShell/ksh/src/cmd/ksh93/sh/init.c:265
#2 0x5647b788fea9 in path_addcomp /home/johno/GitRepos/KornShell/ksh/src/cmd/ksh93/sh/path.c:1567
#3 0x5647b78911ed in path_addpath /home/johno/GitRepos/KornShell/ksh/src/cmd/ksh93/sh/path.c:1705
#4 0x5647b7888e82 in defpathinit /home/johno/GitRepos/KornShell/ksh/src/cmd/ksh93/sh/path.c:442
#5 0x5647b78869f3 in ondefpath /home/johno/GitRepos/KornShell/ksh/src/cmd/ksh93/sh/path.c:67
--- cut ---
SUMMARY: AddressSanitizer: 174 byte(s) leaked in 2 allocation(s).
Analysis: The previous code was leaking memory because
defpathinit() returns a pointer from path_addpath(), which has
memory allocated to it in path_addcomp(). This is the code ASan
traced as having allocated memory:
442: return(path_addpath((Pathcomp_t*)0,(defpath),PATH_PATH));
In path_addpath():
1705: first = path_addcomp(first,old,cp,type);
[...]
1729: return(first);
In path_addcomp():
1567: pp = sh_newof((Pathcomp_t*)0,Pathcomp_t,1,len+1);
The ondefpath() function doesn't save a reference to the pointer
returned by defpathinit(), which causes the memory leak:
66: if(!defpath)
67: defpathinit();
The changes in this commit avoid this problem by setting the
defpath variable without also calling path_addpath().
src/cmd/ksh93/sh/path.c:
- Move the code for allocating defpath from defpathinit() into its
own dedicated function called std_path(). This function is called
by defpathinit() and ondefpath() to obtain the current string
stored in the defpath variable. This bugfix is adapted from a
fork of ksh2020: https://github.com/l0stman/ksh/commit/db5c83a6
'eval' suffers from the same bug. Reproducer:
$ eval vi
then suspend vi, then try to resume it -- the same as in the
reproducer shown in the previous commit.
src/cmd/ksh93/bltins/misc.c: b_eval():
- Same fix. Do *not* turn off SH_MONITOR.
This fixes yet another whopper of a bug in job control. And it's
been in every version of ksh93 back to 1995, the beginning of
ast-open-archive. <sigh>
This is also bug number 23 that is fixed by simply removing code.
Reproducer:
1. Run vi, or another suspendable program, from a dot script or
POSIX function (ksh handles them the same way). So either:
$ echo vi >v
$ . ./v
or:
$ v() { vi; }
$ v
2. Suspend vi by typing Ctrl+Z.
3. Not one but two jobs are registered:
$ jobs -l
[2] + 85513 Stopped . ./v
[1] - 85512 Stopped . ./v
4. 'fg' does not work on either of them, just printing the job
command name but not resuming the editor. The second job
disappears from the table after 'fg'.
$ fg %2
. ./v
$ fg %2
ksh: fg: no such job
$ fg %1
. ./v
$ fg %1
. ./v
Either way, you're stuck with an unresumable vi that you have to
'kill -9' manually.
src/cmd/ksh93/sh/xec.c: sh_exec(): TFORK:
- Do *not* turn off the SH_MONITOR state flag (which tells ksh to
keep track of jobs) when running an external command from a
profile script or dot script/POSIX function. It's obvious that
this results in an inconsistent job control state as ksh will not
update it when the external command is suspended. The purpose of
this nonsense is surely lost to history as it's been there since
1995 or before. My testing says that removing it doesn't break
anything. If that turns out to be wrong, then the breakage will
have to be fixed in a correct way instead.
Attempting to use array subscript expansion with variables that
aren't set currently causes a spurious syntax error (in ksh93u+ and
older commits the reproducer crashes):
$ ksh -c 'echo ${foo[${bar}..${baz}]}' # Shouldn't print anything
ksh: : arithmetic syntax error
src/cmd/ksh93/sh/macro.c:
- Backport a parser bugfix from ksh93v- 2012-08-24 that avoids
setting mp->dotdot until the copyto() function's loop is
finished.
src/cmd/ksh93/tests/arrays.sh:
- Add regression tests for this bug.
On Cygwin, ksh does not execute scripts without a #! path in a fork
of the ksh process as it does on other systems. Reproducer (run
from ksh):
$ cat test.sh
echo "${BASH_VERSION:-not bash}"
echo "${.sh.version}"
$ chmod +x test.sh
$ ./test.sh
4.4.12(3)-release
./test.sh: line 2: ${.sh.version}: bad substitution
The script was executed in bash instead of ksh.
After this fix, the output on Cygwin is like ksh on other systems:
not bash
Version AJM 93u+m/1.1.0-alpha+dev 2022-01-26
This also fixes a number of regression test failures, as quite a
few tests create and execute temp scripts without a hashbang path.
Analysis: On Cygwin, execve(2) happily executes shell scripts
without a #! path with /bin/sh (which is bash --posix). However,
ksh relies on execve(2) executing binaries or #! only, as it uses
an ENOEXEC failure to decide whether to fork and execute a #!-less
shell script with a reinitialized copy of itself via exscript().
src/cmd/ksh93/sh/path.c: path_spawn():
- Look at the magic first two bytes of the file; if it is "MZ"
(Mark Zbikowski, originator of the .exe format) or "#!", continue
as normal, otherwise simulate an ENOEXEC failure from execve(2)
which will cause ksh to fall back on #!-less script execution.
src/cmd/ksh93/sh.1:
- Add a new section on history expansion mostly adapted from the
"History substitution" section from the tcsh(1) man page. This
has the standard BSD license which is already in the COPYRIGHT
file. Inapplicable stuff was removed, some new stuff added.
src/cmd/ksh93/edit/hexpand.c,
src/cmd/ksh93/sh/io.c:
- Set '#' as the default history comment character as on bash;
no longer disable it by default.
- Add the 'a' modifier as a synonym for 'g', as on bash.
- Remove pointless static keyword from np variable; since the
value from previous calls is never used it can just be local.
- Use NV_NOADD flag with nv_open() to avoid pointlessly creating
the node if the variable doesn't exist yet.
- Fix a bug in history expansion where the 'p' modifier had no
effect if the 'histverify' option is on.
Reproducer:
$ set -H -o histv
$ true a b c
$ !!:p
$ true a b c▁ <= instead of printed, the line is re-edited
Expected:
$ set -H -o histv
$ true a b c
$ !!:p
true a b c
$ ▁
This is fixed by making 'p' remove the HIST_EVENT bit from the
returned flag bits in hist_expand(), leaving only the HIST_PRINT
flag, then adding special handling for this case to slowread()
in io.c (print the line, then instead of executing it, continue
and read the next line).
Reproducer:
$ set -o histexpand
$ echo foo !#^:h !#^:&
/usr/local/bin/ksh: :&: no previous substitution
ksh(80822,0x10bc2a5c0) malloc: *** error for object 0x10a13bae3: pointer being freed was not allocated
ksh(80822,0x10bc2a5c0) malloc: *** set a breakpoint in malloc_error_break to debug
Abort
Analysis: In hist_expand(), the 'cc' variable has two functions:
it holds a pointer to a malloc'ed copy of the current line, and is
also used as a temporary pointer with functions like strchr().
After that temporary use, it is set to NULL again, because the
'done:' routine checks if it non-NULL to decide whether to free the
pointer. But if an error occurs, the function may jump straight to
'done' without first setting cc to NULL if it had been used as a
temporary pointer. It then tries to free an unallocated pointer.
src/cmd/ksh93/edit/hexpand.c: hist_expand():
- Eliminate this bad practice by using a separate variable for
temporary pointer purposes.
(I was unable to reproduce the crash in a pty regression test,
though it is consistently reproducible in a real interactive
session. So I haven't added that test.)
So far all ksh versions accept event numbers referring to
nonexistent history events in history expansion (-H/-o histexpand),
e.g. !9999 is accepted even if the history file has no item 9999.
These expansions seem to show random content from the history file,
sometimes including binary data. Of course an "event not found"
error should have been thrown instead.
hist_expand() in hexpand.c calls hist_seek() (from history.c)
without any bounds checking except verifying the history event
number is greater than zero. This commit adds a bounds check
to hist_seek() itself as it's called from three other places
in history.c, so perhaps this fixes a few other bugs as well.
src/cmd/ksh93/edit/history.c: hist_seek():
- Use the hist_min() and hist_max() macros provided in history.h
to check bounds. Note that hist_max() yields the number of the
command line currently being entered, so the maximum for seeking
purposes is actually its result minus 1.
History expansion currently crashes under ASan due to a buffer
overflow. Reproducer:
$ set -H
$ !!:s/old/new/
Explanation from <https://github.com/att/ast/issues/1369>:
> The problem is the code assumes the buffer allocated for a string
> stream is zero initialized. But the SFIO code uses malloc() to
> allocate the buffer and does not explicitly initialize it with
> memset(). That it works at all, even without ASAN enabled, is
> purely accidental. It will fail if that malloc() returns a block
> that had been previously allocated, used, and freed. Under ASAN
> the buffer is initialized (at least on my system) to a sequence
> of 0xBE bytes. So the strdup() happily tries to duplicate a
> string that is the size of that buffer and fails when it reads
> past the end of the buffer looking for the terminating zero byte.
src/cmd/ksh93/edit/hexpand.c:
- Backport ksh2020 bugfix that avoids assuming the string stream
has been initialized to zeros:
https://github.com/att/ast/commit/cf16bcca
(minus the incorrect change to the static wm variable).
This adds two long-form shell options that modify history expansion
(-H/--histexpand). If --histreedit is on and a history expansion
fails, the command line is reloaded into the next prompt's edit
buffer, allowing corrections. If --histverify is on, the results of
a history expansion are not immediately executed but instead loaded
into the next prompt's edit buffer, allowing further changes.
SH_HISTREEDIT and SH_HISTVERIFY were already handled all along in
slowread() in io.c and via 'reedit' arguments to functions called
there, but could not be turned on as they were only ever exposed as
shopt options in the removed bash compatibility mode (in theory
only, as it failed to compile). I had overlooked them until now.
So, since the code is there, let's expose these options through the
normal long options interface. They're working fine, and activating
them actually makes history expansion tolerable to use.
src/cmd/ksh93/data/options.c:
- Make these options available as "histreedit" and "histverify".
src/cmd/ksh93/data/builtins.c,
src/cmd/ksh93/sh.1:
- Document the "new" options.
src/cmd/ksh93/include/defs.h:
- Remove unused SH_HISTAPPEND and SH_HISTORY2 macros which were
part of the removed bash compatibility code. Note that ksh does
not need a histappend option as it never overwrites the history
file (in the bash mode, this shopt option was a no-op).
Attempting to complete file names in vi mode using tab completion can
fail if the last character on the command line is a space. Reproducer
(note that this bug doesn't occur in emacs mode):
$ set -o vi
$ mkdir '/tmp/foo bar'
$ test -d /tmp/foo\ <Tab>
src/cmd/ksh93/edit/vi.c:
- Don't disable tab completion or reset the tab count just because the
last character on the command line is a space. This bugfix was
backported from ksh93v- 2014-06-06.
src/cmd/ksh93/tests/pty.sh:
- Add a regression test for the tab completion bug.
This commit implements the build fixes required to get ksh running on
Haiku. Note that while ksh does compile, it has a ton of regression test
failures on Haiku.
src/cmd/ksh93/data/signals.c,
src/lib/libast/features/signal.c:
- Add support for the SIGKILLTHR signal, which is supported by BeOS and
Haiku.
- SIGINFO was missing an entry in the libast feature test, so add one
(re: 658bba74).
src/cmd/ksh93/RELEASE:
- Add an entry noting that ksh now compiles on Haiku, albeit with many
regression test failures.
src/cmd/ksh93/{include/terminal.h,sh/path.c}:
- Silence compiler warnings on Haiku.
src/lib/libast/features/mmap:
- The mmap feature test freezes on Haiku, so modify the test to fail
immediately on that OS.
src/lib/libast/misc/signal.c:
- Avoid redefining the signal definition on Haiku to fix a compiler
error.
src/lib/libast/features/nl_types:
- For some reason the nl_item typedef on Haiku doesn't work correctly.
Work around that by creating the nl_item type in the libast nl_types
feature test.
After 'unset CDPATH', CDPATH continued to work as if nothing
happened. Unsetting it should be a valid way to deactivate it.
This bug is in every ksh93 version.
src/cmd/ksh93/bltins/cd_pwd.c: b_cd():
- Fix a manifest logic error: first check if CDPATH (CDPNOD) is
unset before assigning to 'cdpath', not the other way around.
Setting the 'cdpath' pointer is what activates the CDPATH search.
This commit ports performance optimizations from illumos for the libsum
code (used by the cksum and sum builtins):
98bea71f0d
The new codepath in libsum uses prefetching and loop unrolling to
improve performance (prefetching is done with __builtin_prefetch()
or sun_prefetch_read_many() if either is available).
Script for testing (note that cksum must be enabled in
src/cmd/ksh93/data/builtins.c):
#!/bin/ksh
builtin cksum || exit 1
for ((i=0; i!=50000; i++)) do
cksum -x att /etc/hosts
done >/dev/null
Results on Linux x86_64 (using CCFLAGS=-O2):
$ echo 'UNPATCHED:'; time arch/linux.i386-64/bin/ksh /tmp/foo; echo 'PATCHED'; time /tmp/ksh /tmp/foo
UNPATCHED:
real 0m09.989s
user 0m07.582s
sys 0m02.406s
PATCHED:
real 0m06.536s
user 0m04.331s
sys 0m02.204s
src/lib/libsum/{sum-att.c,sum-crc.c,Mamfile}:
- Port the performance optimizations from illumos to 93u+m libsum. To
prevent problems with older versions of GCC, avoid the new codepath
if GCC is older than the 3.1 release series. Additionally, the ast.h
header must be included to handle tcc defining __GNUC__ on FreeBSD.
- Apply some build fixes to allow the new codepath to build with Clang
3.6 and newer (my own testing indicates an even better performance
improvement with Clang than with GCC).
This patch adds a few extra options to the ulimit command (if the OS
supports them). These options are also present in Bash, although in ksh
additional long forms of each option are available:
ulimit -k/--kqueues This is the maximum number of kqueues.
ulimit -P/--npts This is the maximum number of pseudo-terminals.
ulimit -R/--rttime This is the time a real-time process can run
before blocking, in microseconds. When the
limit is exceeded, the process is sent SIGXCPU.
Other changes:
- bltins/ulimit.c: Change the formatting from sfprintf and increase the
size of the tmp buffer to prevent text from being cut off in ulimit
-a (this was required to add ulimit -R).
- data/limits.c: Add support for using microseconds as a unit.
The unused mkservice and eloop builtins are currently not built, and if
an attempt to compile them is made the build ends in failure. This
commit backports a few build fixes from ksh93v- 2012-08-24 that allow
mkservice and eloop to build (plus an additional compiler warning fix
not in ksh93v-). I've also added a new SHOPT_MKSERVICE setting (turned
off by default) so that mkservice and eloop can be built if the user
chooses to include them in their build of ksh.
This commit backports the whence '-t' option from ksh93v-. The '-t'
option is useful when one needs to identify the type of a command.
The '-t' flag was added by ksh93v- for compatibility with Bash.
It should be noted the ksh93v- patch had one bug, which this commit
fixes. Path-bound builtins from /opt/ast/bin were classified as
files if loaded from /opt/ast/bin in the PATH. Reproducer:
$ PATH=/opt/ast/bin whence -t cat
file
src/cmd/ksh93/bltins/whence.c:
- Simplify the bitmask values for the command and whence builtin
flags.
- Add the -t flag to the whence and type builtins. To prevent bugs,
-t will always override -v if both of those flags were passed.
src/cmd/ksh93/data/builtins.c,
src/cmd/ksh93/sh.1:
- Add documentation for the new -t option.
Depending on the OS, the heredoc.sh regression tests, and possibly
others, still crashed with the -x option (xtrace) on.
Analysis: The lexer crashes in lex_advance(). Something has caused
an inconsistent lexer state, and it happened earlier on, so the
backtrace is useless for figuring out where that happened.
But I think I've found it. It's the sh_mactry() call here:
src/cmd/ksh93/sh/xec.c, lines 2800 to 2807 in f7213f03
2800: if(!(cp=nv_getval(sh_scoped(shp,PS4NOD))))
2801: cp = "+ ";
2802: else
2803: {
2804: sh_offoption(SH_XTRACE);
2805: cp = sh_mactry(shp,cp);
2806: sh_onoption(SH_XTRACE);
2807: }
sh_mactry() needs to parse the contents of $PS4 to perform
expansions and command substitutions in it, which involves the
lexer. If that happens in a here-document, the lexer is in the C
function call stack, in the middle of parsing the here-document.
Result: inconsistent lexer state. Solution: save and restore lexer
state in sh_mactry().
After this commit, all regression tests should pass with the
'-x'/'--xtrace' option in use, with no errors or crashes.
Note for backporters: this fix depends both on on d7cada7b and on
the consistency fix for the Lex_t type's size applied in a7ed5d9f.
src/cmd/ksh93/include/shlex.h:
- Cosmetic fix: remove a copied & pasted backslash. (re: a7ed5d9f)
src/cmd/ksh93/sh/macro.c: sh_mactry():
- Save and restore the lexer state before letting sh_mactrim()
indirectly parse and execute code.
src/cmd/ksh93/tests/*.sh:
- Turn off xtrace in various command substitutions that contain
2>&1 redirections, so that the xtrace output is not caught by
the command substitutions, causing tests to fail incorrectly.
- Turn off xtrace for a few code blocks with 2>&1 redirections,
stopping xtrace output from being written to standard output.
Resolves: https://github.com/ksh93/ksh/issues/306 (again)
On some systems (at least Linux and macOS):
1. Run on a command line: t=$(sleep 10|while :; do :; done)
2. Press Ctrl+C in the first 10 seconds.
3. Execute any other command substitution. The shell crashes.
Analysis: Something in the job_wait() call in the sh_subshell()
restore routine may be interrupted by a signal such as SIGINT on
Linux and macOS. Exactly what that interruptible thing is remains
to be determined. In any case, since job_wait() was invoked after
sh_popcontext(), interrupting it caused the sh_subshell() restore
routine to be aborted, resulting in an inconsistent state of the
shell. The fix is to sh_popcontext() at a later stage instead.
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- Rename struct checkpt buff to checkpoint because it's clearer.
- Move the sh_popcontext() call to near the end, just after
decreasing the subshell level counters and restoring the global
subshell data struct to its parent. This seems like a logical
place for it and could allow other things to be interrupted, too.
- Get rid of the if(shp->subshell) because it is known that the
value is > 0 at this point.
- The short exit routine run if the subshell forked now needs a new
sh_popcontext() call, because this is handled before restoring
the virtual subshell state.
- While we're here, do a little more detransitioning from all those
pointless shp pointers.
Fixes: https://github.com/ksh93/ksh/issues/397
This commit was originally intended to fix just one bug with shcomp's
handling of 'alias -p', but while fixing that I found a large number
of related issues in the alias command's -p, -t and -x options. The
current patch provides bugfixes for all of the bugs listed below:
1) Listing aliases in a script with 'alias -p' or 'alias' broke
shcomp's bytecode output:
https://github.com/ksh93/ksh/issues/87#issuecomment-813819122
2) Listing individual aliases with the -p option doesn't work:
$ alias foo=bar bar=foo
$ alias foo
foo=bar
$ alias -p foo # No output
3) Listing specific tracked aliases with -pt does not display them
in a reusable format, but rather adds another tracked alias:
$ hash -r cat vi
$ alias -pt vi # No output
$ alias -pt rm
$ alias -t
cat=/usr/bin/cat
rm=/usr/bin/rm
vi=/usr/bin/vi
4) Listing all tracked aliases with -pt does not output them in a
reusable format (the resulting command printed only creates a
normal alias, which is different from a tracked alias):
$ hash -r cat
$ alias -pt
alias cat=/usr/bin/cat # Expected 'alias -t cat'
5) Listing a non-existent alias with -p doesn't cause an error:
$ unalias -a
$ alias -p notanalias # No output
$ echo $?
0
$ alias notanalias
notanalias: alias not found
$ echo $?
1
$ hash -r
$ alias -pt notacommand # No output
$ echo $?
0
6) Attempting to list 256 non-existent aliases results in exit
status zero:
$ unalias -a
$ alias $(awk -v ORS= 'BEGIN { for(i=0;i<256;i++) print "x "; }')
x: alias not found
--cut error message--
$ echo $?
0
Changes:
- typeset.c: Avoid printing anything while shcomp is compiling a
script. This is needed because the alias command is run by shcomp
to prevent parsing issues.
- b_alias(): To avoid adding tracked aliases with -pt, set
tdata.aflag to '+' so that setall() and other related functions
only list tracked aliases.
- b_alias(): Set tdata.pflag to 1 so that setall() and other
functions recognize -p was passed.
- print_value(): Add support for listing specific aliases with
'alias -p'.
- setall(): To avoid any issues with zombie tracked aliases (see also
the regression tests) ignore tracked alias nodes marked with the
NV_NOALIAS attribute. This bit is set for tracked alias nodes by
the nv_rehash() function.
- setall(): For backward compatibility, continue incrementing the
exit status for each invalid alias and tracked alias passed. This
was already how alias behaved when listing aliases without -p, so
using -p shouldn't cause a change in behavior:
$ unalias -a
$ alias foo bar
foo: alias not found
bar: alias not found
$ echo $?
2
To fix bug 6, the exit status is set to one if an enforced 8-bit
exit status would be zero.
- print_namval(): Set the prefix to 'alias -t' so that listing
tracked aliases with 'alias -pt' works correctly.
- data/msg.c and include/name.h: Add an error message for when
'alias -pt' doesn't find a tracked alias.
- tests/alias.sh: Add a ton of regression tests for the bugs fixed in
this commit.
- sh/args.c: A process substitution run in a profile script may print
its PID as if it was a command spawned with '&'. Reproducer:
$ cat /tmp/env
true >(false)
$ ENV=/tmp/env ksh
[1] 730227
$
This bug is fixed by turning off the SH_PROFILE state while running
a process substitution.
- sh/subshell.c: The SH_INTERACTIVE fix in 3525535e renders the extra
check for SH_PROFILE redundant, so it has been removed.
- tests/io.sh: Update the procsub PIDs test to also check the result
after using process substitution in a profile script.
Reproducer: run vi in a subshell:
$ (vi)
vi opens; now press Ctrl+Z to suspend. The output is as expected:
[2] + Stopped (vi)
…but the exit status is 18 (SIGTSTP's signal number) instead of 0.
Now do:
$ fg
(vi)
$
The exit status is 18 again, vi is not resumed, and the job is
lost. You have to find vi's pid manually using ps and kill it.
Forking all non-command substitution subshells invoked from the
interactive main shell is the only reliable and effective fix I've
found. I've tried to fork the subshell conditionally in every other
remotely plausible place I can think of in fault.c and xec.c, but I
can't get anything to work properly. If anyone can get this to work
without forking as much (or at all), please do submit a patch or PR
that supersedes this fix.
At least subshells of subshells don't need to fork, so the
performance impact can be limited. Plus, it's not as if most people
need maximum speed on the interactive command line. Scripts
(including login/profile scripts) are not affected at all.
Command substitutions can be handled differently. My testing shows
that all shells except ksh93 simply block SIGTSTP (the ^Z signal)
while they run. We should do the same, so they don't need to fork.
NOTE for any backporters: the subshell.c and fault.c changes depend
on commits 35b02626 and 48ba6964 to work correctly.
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- If the interactive shell state bit is on, then before executing
the subshell's code:
- for command substitutions, block SIGTSTP;
- for other subshells, fork.
- For command substitutions, release SIGTSTP if the interactive
shell state bit was on upon invoking the subshell.
src/cmd/ksh93/sh/fault.c:
- Instead of checking for a virtual subshell, check the shell's
interactive state bit to decide whether to handle SIGTSTP, as
that is only turned on in the interactive main shell.
src/cmd/ksh93/sh/main.c: sh_main():
- To avoid bugs, ignore SIGTSTP while running profile scripts.
Blocking it doesn't work because delaying it until after
sigrelease() will cause a crash. Thanks to @JohnoKing for this.
- While we're here, prevent a possible overflow of the 'beenhere'
static char variable by only incrementing it once.
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
Resolves: https://github.com/ksh93/ksh/issues/390
Reproducer:
$ (sleep 1& echo done)
done
$ (eval "echo hi"; sleep 1& echo done)
hi
[1] 30587
done
No job control output should be printed for a background process
invoked from a subshell, not even after 'eval'.
The cause: sh_parse() turns on the shell's interactive state bit
(sh_state(SH_INTERACTIVE)) if the interactive shell option is on.
This is incorrect. The parser should have no involvement with shell
interactivity in principle because that's not its domain.
Not only that, the parser may need to run in a subshell, e.g. when
executing traps or 'eval' commands (as above). By definition, a
subshell can never be interactive.
We already fixed many bugs related to job control and the shell's
interactive state. Even if these two lines previously papered over
some breakage, I can't find any now after simply removing them. If
any is found later, then it'll need to be fixed properly instead.
Related: https://github.com/ksh93/ksh/issues/390
Announcing: KornShell 93u+m 1.0.0-beta.2
https://github.com/ksh93/ksh
In May 2020, when every KornShell (ksh93) development project was
abandoned, development was rebooted in a new fork based on the last
stable AT&T version: ksh 93u+. This new fork is called ksh 93u+m as a
permanent nod to its origin. We're restarting it at version 1.0. Seven
months after the first beta, the second one is ready. Please test this
second beta and report any bugs you find, or help us fix known bugs.
We're now the default ksh93 in some OS distributions, at least Debian
and Slackware! Even though we don't think it's stable release quality
yet, the consensus seems to be that 93u+m is already much better than
the last AT&T release.
Main developers: Martijn Dekker, Johnothan King, hyenias
Contributors: Andy Fiddaman, Anuradha Weeraman, Chase, Gordon Woodhull,
Govind Kamat, Harald van Dijk, Lev Kujawski, Marc Wilson, Ryan Schmidt,
Sterling Jensen
HOW TO GET IT
Please download the source code tarball from our GitHub releases page:
https://github.com/ksh93/ksh/releases
To build, follow the instructions in README.md or src/cmd/ksh93/README.
HOW TO GET INVOLVED
To report a bug, please open an issue at our GitHub page (see above).
Alternatively, email me at martijn@inlv.org with your report.
To get involved in development, read the brief policy information in
README.md and then jump right in with a pull request or email a patch.
See the TODO file in the top-level directory for a to-do list.
*** MAIN CHANGES between 1.0.0-beta.1 and 1.0.0-beta.2 ***
New features in built-in commands:
- 'cd' now supports an -e option that, when combined with -P, verifies
that $PWD is correct after changing directories; this helps detect
access permission problems. See:
https://www.austingroupbugs.net/view.php?id=253
- 'printf' now supports a -v option as in bash. This assigns formatted
output directly to variables, which is very fast and will not strip
final newline (\n) characters.
- The 'return' command, when used to return from a function, can now
return any status value in the 32-bit signed integer range, like on
zsh. However, due to a traditional Unix kernel limitation, $? is
still trimmed to its least significant 8 bits whenever leaving a
(sub)shell environment.
- 'test'/'[' now supports all the same operators as [[ (including =~,
\<, \>) except for the different 'and'/'or' operators. Note that
'test'/'[' remains deprecated due to its unfixable pitfalls;
[[ ... ]] is recommended instead.
Shell language changes:
- Several improvements were made to the --noexec shell code linter.
- Arithmetic expressions in native ksh mode no longer interpret a
number with a leading zero as octal in any context. Use 8#octalnumber
instead (e.g. 8#400 == 256). Arithmetic expressions now also behave
identically within and outside ((...)) and $((...)).
- POSIX compatibility mode fixes (only applicable with the --posix shell
option on):
- A leading zero is now consistently recognised as introducing an octal
number in all arithmetic contexts.
- $((inf)) and $((nan)) are now interpreted as regular variables.
- The '.' built-in no longer runs ksh functions and now only runs
files.
Bugs fixed:
- '.' and '..' are now once again completed by tab completion.
- If SIGINT is set to ignore, the interactive shell no longer exits on
Ctrl+C.
- ksh now builds and runs on Apple's new M1 hardware.
- The 'return' and 'exit' commands no longer risk triggering actual
signals by returning or exiting with a status > 256.
- Ksh no longer behaves badly when parsing a type definition command
('typeset -T' or 'enum') without executing it or when executing it in
a subshell. Types can now safely be defined in subshells and defined
conditionally as in 'if condition; then enum ...; fi'.
- Discipline functions, especially those applied to PS2 or .sh.tilde,
will no longer crash your shell upon being interrupted or throwing an
error.
- Fixed a bug that could corrupt output if standard output is closed
upon initialising the shell.
- Fixed a bug in the [[ ... ]] compound command: the '!' logical
negation operator now correctly negates another '!', e.g.,
[[ ! ! 1 -eq 1 ]] now returns 0/true. Note that this has always been
the case for 'test'/'['.
- Fixed SHLVL so that replacing ksh by itself (exec ksh) will not
increase it.
- Arithmetic expressions are no longer allowed to assign out-of-range
values to variables of types declared with enum.
- The 'time' keyword no longer makes the --errexit shell option
ineffective.
- Various bugs in libcmd built-in commands (those bound to the
/opt/ast/bin path by default) have been fixed.
- Various other crashing bugs have been fixed.
Fixes for the shcomp byte code compiler:
- shcomp is now able to compile scripts that define types using enum.
- shcomp now refuses to mess up your terminal by writing bytecode
to it.
*** MAIN CHANGES between ksh 93u+ 2012-08-01 and 93u+m 1.0.0-beta.1 ***
Hundreds of bugs have been fixed, including many serious/critical bugs.
This includes upstreamed patches from OpenSUSE, Red Hat, and Solaris, fixes
backported from the abandoned 93v- beta and ksh2020 fork, as well as many
new fixes from the community. See the NEWS file for more information, and
the git commit log for complete documentation of every fix. Incompatible
changes have been minimised, but not at the expense of fixing bugs. For a
list of potentially incompatible changes, see src/cmd/ksh93/COMPATIBILITY.
Though there was a "no new features, bugfixes only" policy, some new
features were found necessary, either to fix serious design flaws or to
complete functionality that was evidently intended, but not finished.
Below is a summary of these new features.
New command line editor features:
- The forward-delete and End keys are now handled as expected in the
emacs and vi built-in line editors.
- In the vi and emacs line editors, repeat count parameters can now also
be used for the arrow keys and the forward-delete key. E.g., in emacs
mode, <ESC> 7 <left-arrow> will now move the cursor seven positions to
the left. In vi control mode, this would be entered as: 7 <left-arrow>.
New shell language features:
- The &>file redirection shorthand (for >file 2>&1) is now available for
all scripts and interactive sessions and not only for profile/login
scripts, bringing ksh 93u+m in line with mksh, bash, and zsh.
- File name generation (a.k.a. pathname expansion, a.k.a. globbing) now
never matches the special navigational names '.' (current directory)
and '..' (parent directory). This change makes a pattern like .*
useful; it now matches all hidden files (dotfiles) in the current
directory, without the harmful inclusion of '.' and '..'.
- Tilde expansion can now be extended or modified by defining a
.sh.tilde.get or .sh.tilde.set discipline function. This replaces a
2004 undocumented attempt to add this functionality via a .sh.tilde
command, which never worked and crashed the shell. See the manual for
details on the new method.
New features in built-in commands:
- Usage error messages now show the --help/--man self-documentation options.
- Path-bound built-ins (such as /opt/ast/bin/cat) can now be executed by
invoking the canonical path, so the following will now work as expected:
$ /opt/ast/bin/cat --version
version cat (AT&T Research) 2012-05-31
- 'command -x' now looks for external commands only, skipping built-ins.
In addition, its xargs-like functionality no longer freezes the shell on
Linux and macOS, making it effectively a new feature on these systems.
- 'redirect' now checks if all arguments are valid redirections before
performing them. If an error occurs, it issues an error message instead
of terminating the shell.
- 'suspend' now refuses to suspend a login shell, as there is probably no
parent shell to return to and the login session would freeze.
- 'times' now gives high precision output in a POSIX compliant format.
- 'typeset' now gives an informative error message if an incompatible
combination of options is given.
- 'whence -v/-a' now reports the location of autoloadable functions.
New features in shell options:
- A new --globcasedetect shell option is added on OSs where we can
check for a case-insensitive file system (currently Windows/Cygwin,
macOS, Linux and QNX 7.0+). When this option is turned on, file name
generation (globbing), as well as file name tab completion on
interactive shells, automatically become case-insensitive on file
systems where the difference between upper and lower case is ignored
for file names. This is transparently determined for each directory, so
a path pattern that spans multiple file systems can be part
case-sensitive and part case-insensitive.
- A new --nobackslashctrl shell option disables the special escaping
behaviour of the backslash character in the emacs and vi built-in
editors. Particularly in the emacs editor, this makes it much easier to
go backward, insert a forgotten backslash into a command, and then
continue editing without having your next cursor key replace your
backslash with garbage. Note that Ctrl+V (or whatever other character
was set using 'stty lnext') always escapes all control characters in
either editing mode.
- A new --posix shell option has been added to ksh 93u+m that makes the
ksh language more compatible with other shells by following the POSIX
standard more closely. See the manual page for details. It is enabled by
default if ksh is invoked as sh, otherwise it is disabled by default.
- Enhancement to -G/--globstar: symbolic links to directories are now
followed if they match a normal (non-**) glob pattern. For example, if
'/lnk' is a symlink to a directory, '/lnk/**' and '/l?k/**' now work as
you would expect.
Strings compared in [[ with the > and < operators should be compared
lexically. This does not work when the strings are single digits, as
the parser interprets it as a syntax error:
$ [[ 10<2 ]] # 10 lexically sorts before 2
$ echo $?
0
$ [[ 1<2 ]]
/usr/bin/ksh: syntax error: `<' unexpected
$ echo $?
3
src/cmd/ksh93/sh/lex.c:
- Don't interpret numbers next to > and < as a redirection while
inside of [[. This bugfix was backported from ksh93v- 2014-06-25.
src/cmd/ksh93/tests/bracket.sh:
- Add regression tests for the > and < operators.
New version. I'm pretty sure the problems that forced me to revert
it earlier are fixed.
This commit mitigates the effects of the hack explained in the
referenced commit so that dummy built-in command nodes added by the
parser for declaration/assignment purposes do not leak out into the
execution level, except in a relatively harmless corner case.
Something like
if false; then
typeset -T Foo_t=(integer -i bar)
fi
will no longer leave a broken dummy Foo_t declaration command. The
same applies to declaration commands created with enum.
The corner case remaining is:
$ ksh -c 'false && enum E_t=(a b c); E_t -a x=(b b a c)'
ksh: E_t: not found
Since the 'enum' command is not executed, this should have thrown
a syntax error on the 'E_t -a' declaration:
ksh: syntax error at line 1: `(' unexpected
This is because the -c script is parsed entirely before being
executed, so E_t is recognised as a declaration built-in at parse
time. However, the 'not found' error shows that it was successfully
eliminated at execution time, so the inconsistent state will no
longer persist.
This fix now allows another fix to be effective as well: since
built-ins do not know about virtual subshells, fork a virtual
subshell into a real subshell before adding any built-ins.
src/cmd/ksh93/sh/parse.c:
- Add a pair of functions, dcl_hactivate() and dcl_dehacktivate(),
that (de)activate an internal declaration built-ins tree into
which check_typedef() can pre-add dummy type declaration command
nodes. A viewpath from the main built-ins tree to this internal
tree is added, unifying the two for search purposes and causing
new nodes to be added to the internal tree. When parsing is done,
we close that viewpath. This hides those pre-added nodes at
execution time. Since the parser is sometimes called recursively
(e.g. for command substitutions), keep track of this and only
activate and deactivate at the first level.
(Fixed compared to previous version of this commit: calling
dcl_dehacktivate() when the recursion level is already zero is
now a harmless no-op. Since this only occurs in error handling
conditions, who cares.)
- We also need to catch errors. This is done by setting libast's
error_info.exit variable to a dcl_exit() function that tidies up
and then passes control to the original (usually sh_exit()).
(Fixed compared to previous version of this commit: dcl_exit()
immediately deactivates the hack, no matter the recursion level,
and restores the regular sh_exit(). This is the right thing to
do when we're in the process of erroring out.)
- sh_cmd(): This is the most central function in the parser. You'd
think it was sh_parse(), but $(modern)-form command substitutions
use sh_dolparen() instead. Both call sh_cmd(). So let's simply
add a dcl_hacktivate() call at the beginning and a
dcl_deactivate() call at the end.
- assign(): This function calls path_search(), which among many
other things executes an FPATH search, which may execute
arbitrary code at parse time (!!!). So, regardless of recursion
level, forcibly dehacktivate() to avoid those ugly parser side
effects returning in that context.
src/cmd/ksh93/bltins/enum.c: b_enum():
- Fork a virtual subshell before adding a built-in.
src/cmd/ksh93/sh/xec.c: sh_exec():
- Fork a virtual subshell when detecting typeset's -T option.
Improves fix to https://github.com/ksh93/ksh/issues/256
The killpg(getpgrp(),SIGINT) call added to ed_getchar() in that
commit caused the interactive shell to exit on ^C even if SIGINT is
being ignored. We cannot revert or remove that call without
breaking job control. This commit applies a new fix instead.
Reproducers fixed by this commit:
SIGINT ignored by child:
$ PS1='childshell$ ' ksh
childshell$ trap '' INT
childshell$ (press Ctrl+C)
$
SIGINT ignored by parent:
$ (trap '' INT; ENV=/./dev/null PS1='childshell$ ' ksh)
childshell$ (press Ctrl+C)
$
SIGINT ignored by parent, trapped in child:
$ (trap '' INT; ENV=/./dev/null PS1='childshell$ ' ksh)
childshell$ trap 'echo test' INT
childshell$ (press Ctrl+C)
$
I've experimentally determined that, under these conditions, the
SFIO stream error state is set to 256 == 0400 == SH_EXITSIG.
src/cmd/ksh93/sh/main.c: exfile():
- On EOF or error, do not return (exiting the shell) if the shell
state is interactive and if sferror(iop)==SH_EXITSIG.
- Refactor that block a little to make the new check fit in nicely.
src/cmd/ksh93/tests/pty.sh:
- Test the above three reproducers.
Fixes: https://github.com/ksh93/ksh/issues/343
Note that this is only about the /opt/ast/bin built-in commands,
not about the regular pathless builtins such as printf.
To use these, either add /opt/ast/bin to your $PATH or use a
command like 'builtin cp'. As usual, --man provides info.
Removed as defaults for lack of convincing advantages over the OS's
external commands:
- chmod, cmp, head, logname, mkdir, sync, uname, wc
Remain as useful defaults:
- basename, cat, cut, dirname. These are commonly used in
performance-sensitive code paths in scripts and having them as
built-ins can be good for performance.
- getconf: This is the only interface to some libast internals that
is available to ksh. It's also has better functionality than most
OS-shipped 'getconf' commands, e.g., it can list and query all
the configuration values.
Added as defaults:
- cp, ln, mv: Having these built in can speed up scripts that
manage files. Also the AST versions have extended functionality
(see cp --man, etc.).
- mktemp: External mktemp commands vary too widely and are
incompatible, but it's important that scripts can securely make
temporary files, so it's good to ship a known interface to this
functionality.
As a result, the statically linked ksh binary is very slightly
smaller than before.
Resolves: https://github.com/ksh93/ksh/issues/349
This bug was first reported at <https://www.illumos.org/issues/3782>.
The chown builtin when used on illumos can fail with different error
messages after running the same command twice:
$ touch /tmp/x
$ /opt/ast/bin/chown -h 433:434 /tmp/px
chown: /tmp/x: cannot change owner and group [Not owner]
$ /opt/ast/bin/chown -h 433:434 /tmp/px
chown: /tmp/x: cannot change owner and group [Invalid argument]
The error messages differ because the libast struid and strgid
functions will return -2 if the same nonexistent ID is used twice.
The fix for this bug has been ported from here:
https://github.com/illumos/illumos-gate/commit/4162633a7c5961f388fd
src/lib/libcmd/chgrp.c:
- Remove NOID macro and check for a < 0 error status instead.
This is different from the Illumos fix at
<https://github.com/illumos/illumos-gate/commit/4162633a7c59>
which added another macro.
src/lib/libast/man/{strgid,struid}.3:
- Correct errors in the strgid and struid documentation.
- Document that the strgid and struid functions will return -2 if
the same invalid name is used twice.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
Turns out there is a bona fide, honest-to-goodness use case for
matching '.' and '..' in globbing after all. It's when globbing is
used as the backend mechanism for file name completion in
interactive shell editors. A tab invisibly adds a * at the end of
the word to the left of your cursor and the resulting pattern is
expanded. In 5312a59d, this broke for '.' and '..'.
Typing '.' followed by two tabs should result in a menu that
includes './' and '../'. Typing '..' followed by a tab should
result in '../', (or a menu that includes it if there are files
with names starting with '..'). This is the behaviour in 93u+ and
we should maintain this.
To restore this functionality without reintroducing the harmful
behaviour fixed in the referenced commits, we should special-case
this, allowing '.' and '..' to match only for file name completion.
src/lib/libast/include/glob.h:
- Fix an inaccurate comment: the GLOB_COMPLETE flag is used for
command completion, not file name completion. This is very clear
from reading the path_expand() function in sh/expand.c.
- Add new GLOB_FCOMPLETE flag for file name completion.
src/lib/libast/misc/glob.c:
- Adapt flags mask to fit the new flag.
- glob_dir(): If GLOB_FCOMPLETE is passed, allow '.' and '..' to
match even if expanded from a pattern.
- Clarify the fix from aad74597 with an extended comment based on
<https://github.com/ksh93/ksh/issues/146#issuecomment-790991990>.
src/cmd/ksh93/sh/expand.c: path_expand():
- If we're in the SH_FCOMPLETE (file name completion) state, then
pass the new GLOB_FCOMPLETE flag to AST glob(3).
Fixes: https://github.com/ksh93/ksh/issues/372
Thanks to @fbrau for the bug report.
