This reduces the bin/package script by more than half!
bin/package, src/cmd/INIT/package.sh:
- Remove obsolete and unused package commands: admin, contents,
license, list, remote, regress, setup, update, verify, write.
- Remove associated documentation.
- Replace install command with a dummy. It'll come back when we
reintroduce the building of dynamic libaries.
- Update the test command to run the regression tests properly
and capture the output in arch/*/lib/package/gen/tests.out, as
documented. Arguments are simply passed to bin/shtests.
src/cmd/INIT/{ditto.sh,hurl.sh,release.c}:
- Removed. These were support scripts for some of the removed
package commands.
src/cmd/ksh93/tests/pty.sh:
- Avoid failure when capturing output via 'bin/package test' by
redirecting standard error to /dev/tty when running the tests.
This bug was first reported at <https://www.illumos.org/issues/3782>.
The chown builtin when used on illumos can fail with different error
messages after running the same command twice:
$ touch /tmp/x
$ /opt/ast/bin/chown -h 433:434 /tmp/px
chown: /tmp/x: cannot change owner and group [Not owner]
$ /opt/ast/bin/chown -h 433:434 /tmp/px
chown: /tmp/x: cannot change owner and group [Invalid argument]
The error messages differ because the libast struid and strgid
functions will return -2 if the same nonexistent ID is used twice.
The fix for this bug has been ported from here:
https://github.com/illumos/illumos-gate/commit/4162633a7c5961f388fd
src/lib/libcmd/chgrp.c:
- Remove NOID macro and check for a < 0 error status instead.
This is different from the Illumos fix at
<https://github.com/illumos/illumos-gate/commit/4162633a7c59>
which added another macro.
src/lib/libast/man/{strgid,struid}.3:
- Correct errors in the strgid and struid documentation.
- Document that the strgid and struid functions will return -2 if
the same invalid name is used twice.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
The standards macros consistency fix for iffe exposed breakage on
illumos: the standards flags aren't set properly. Back in 580ff616,
I set _XPG6 from features/common, which is the wrong place; the
correct place is features/standards -- especially now that iffe
uses its results.
In addition, to get header declarations that aren't somehow in
conflict with themselves on illumos, don't result in "implicit
function declaration" warnings, and expose all the functionality,
we need to define *all* the _XPG[4-7] macros *and* __EXTENSIONS__
*and* _XOPEN_SOURCE. Welp. Thankfully, that's just fine with
Solaris, too.
Thanks to @JohnoKing for the heads-up.
Running 'bin/package environment' should only show what will happen
during the build process, but in it's current state the feature has
some bugs:
1. Errors can occur relating to the failed creation of files and a
failed attempt to change the directory. Various errors from
'bin/package environment make' and 'bin/package environment make
CC=tcc':
bin/package[5632]: cd: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen: [No such file or directory]
bin/package: line 5869: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen/CC: cannot create [No such file or directory]
bin/package: line 5869: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen/CCFLAGS: cannot create [No such file or directory]
bin/package: line 5869: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen/CCLDFLAGS: cannot create [No such file or directory]
bin/package: line 5869: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen/LDFLAGS: cannot create [No such file or directory]
bin/package: line 5869: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen/KSH_RELFLAGS: cannot create [No such file or directory]
bin/package[5888]: /home/johno/GitRepos/KornShell/ksh/arch/linux.i386-64/lib/package/gen/host: cannot create [No such file or directory]
2. The package script may in some scenarios create a temporary file
at the root of the repository, such as 'pkg77213.c'.
bin/package, src/cmd/INIT/package.sh:
- Avoid creating files or changing the directory while the
environment qualifier is on (this also affects the debug
qualifier). Part of this fix is based on a patch from Marcin
Cieślak[*], with other fixes applied for similar problems the
environment qualifier had.
I'm now taking another small step towards extricating this build
system from the long-dead AT&T AST universe.
This commit modifies/reduces the tool called proto. AT&T used proto
for two purposes:
1. To convert ANSI C code to a form compatible with ancient
(pre-ANSI) K&R C compilers using extremely complex macro
voodo. It was similarly capable of translating to C++.
Theoretically, this entire code base should compile on
anything from a 1980s K&R C compiler to a modern C++ compiler.
In practice, given the massive amount of bit rot we inherited,
I am 99.9% sure that this has been broken for many years.
2. To automagically insert license comments into source files
based on an extremely complicated license database system.
(In all-too-typical AT&T fashion, this second function of
proto is completely unrelated to the first.)
Function 2 has now been removed because, unlike the AT&T legal
department, I don't think it's worth going to unspeakably extreme
lengths to avoid maintaining license information in source code
files by hand.
In the process, proto.c was cleaned up to look halfway like actual
C code, but it's still processed code: most macros have been
expanded to their numeric value, all comments were stripped, etc.
So don't expect to understand this code. The actual source code is
in these two directories in the ast-open-history repo:
https://github.com/ksh93/ast-open-history/tree/master/src/cmd/protohttps://github.com/ksh93/ast-open-history/tree/master/src/lib/libpp
Meanwhile, nobody wants to compile ksh with a pre-ANSI K&R C
compiler in 2021 -- and there's no good reason to be compatible
with C++ because standard C compilers are universally available.
So, proto will go away when I manage to figure out how to pry it
loose from the innards of this build system.
src/lib/libast/port/astlicense.c:
- Removed. This is al the license handling code that was
incorporated in proto.c in stripped form. It was not used
anywhere else, and the environment where it was useful is gone.
src/cmd/INIT/proto.c:
- Cleanup to make this halfway maintainable: indentation, huge
blocks of empty lines, #line directives, etc.
- Delete all the code corresponding to astlicense.c. This was
actually easy as it was in a discrete block.
- proto(), pppopen(): Remove 'license'/'notice' and 'options'
arguments.
- main(): Remove processing of -l (license) and -o (license
options) flags.
**/Mamfile:
- Update all the proto invocations to remove the -l and -o flags.
bin/package, src/cmd/INIT/package.sh:
- Delete the 'copyright' command, which used the -l and -o
options to tell proto to extract copyright information from
*.lic/*.def files in lib/package.
COPYRIGHT:
- Added. This has the information from 'bin/package copyright', with
the copyright years corrected to plausible values as the AST code
used the current year (2021) for all of them. It adds ksh 93u+m
copyright and contributor information at the top as well.
(Yes, some of the lines in the old non-AT&T copyright notices
are clipped. This is the actual output of the 'bin/package
copyright' command as generated by 'proto' in the AST
distribution. For all that extreme complexity, they couldn't even
reproduce the notices correctly. But it's officially sanctioned
by AT&T in exactly this form, so there you have it.)
lib/package/**:
- Removed. All these files are now obsolete and redundant.
This commit fixes an issue with how ksh was obtaining the value of
NGROUPS_MAX. On some systems this setting can be changed (e.g., on
illumos adding 'set ngroups_max=32' to /etc/system then rebooting
changes NGROUPS_MAX from 16 to 32). Ksh was using NGROUPS_MAX with
the assumption it's a static value, which could cause issues on
systems where it isn't static. This bugfix is inspired by the one
from <https://github.com/lkujaw/ast/commit/b1362c3a5>, although it
has been expanded a bit to account for OPEN_MAX as well.
src/cmd/ksh93/sh/init.c, src/lib/libcmd/fds.c:
- Rename the getconf() macro to astconf_long() and move it to ast.h
to prevent redundancy. Other sections of the code have been
modified to use this macro for astconf() to account for
dynamic settings.
- An equivalent macro for unsigned long values (astconf_ulong) has
been added.
- Prefer sysconf(3) where available. It has better performance as it
returns a numeric value directly instead of via string
conversion.
- The astconf_long and astconf_ulong macros have been documented in
the ast(3) man page.
Turns out there is a bona fide, honest-to-goodness use case for
matching '.' and '..' in globbing after all. It's when globbing is
used as the backend mechanism for file name completion in
interactive shell editors. A tab invisibly adds a * at the end of
the word to the left of your cursor and the resulting pattern is
expanded. In 5312a59d, this broke for '.' and '..'.
Typing '.' followed by two tabs should result in a menu that
includes './' and '../'. Typing '..' followed by a tab should
result in '../', (or a menu that includes it if there are files
with names starting with '..'). This is the behaviour in 93u+ and
we should maintain this.
To restore this functionality without reintroducing the harmful
behaviour fixed in the referenced commits, we should special-case
this, allowing '.' and '..' to match only for file name completion.
src/lib/libast/include/glob.h:
- Fix an inaccurate comment: the GLOB_COMPLETE flag is used for
command completion, not file name completion. This is very clear
from reading the path_expand() function in sh/expand.c.
- Add new GLOB_FCOMPLETE flag for file name completion.
src/lib/libast/misc/glob.c:
- Adapt flags mask to fit the new flag.
- glob_dir(): If GLOB_FCOMPLETE is passed, allow '.' and '..' to
match even if expanded from a pattern.
- Clarify the fix from aad74597 with an extended comment based on
<https://github.com/ksh93/ksh/issues/146#issuecomment-790991990>.
src/cmd/ksh93/sh/expand.c: path_expand():
- If we're in the SH_FCOMPLETE (file name completion) state, then
pass the new GLOB_FCOMPLETE flag to AST glob(3).
Fixes: https://github.com/ksh93/ksh/issues/372
Thanks to @fbrau for the bug report.
This commit adds onto <https://github.com/ksh93/ksh/pull/353> by porting
over two additional improvements to the shell linter:
1) The changes in the aforementioned pull request were merged into
illumos-gate with an additional change.[*] The illumos revision of
the patch improved the warning for (( $foo = $? )) to specify '$foo'
causes the warning.[**] Example:
$ ksh -n -c '(( $? != $bar ))'
ksh: warning: line 1: in '(( $? != $bar ))', using '$' as in '$bar' is slower and can introduce rounding errors
While I was porting the illumos patch I did notice one problem. The
string it uses from paramsub() skips over the initial '{' in
'${var}', resulting in the warning printing '$var}' instead:
$ ksh -n -c '(( ${.sh.pid} != $$ ))'
... in '(( ${.sh.pid} != $$ ))', using '$' as in '$.sh.pid}' is slower ...
This was fixed by including the missing '{' in the string returned by
paramsub for ${var} variables.
2) In ksh93v-, parsing x=$((expr)) with the shell linter will cause ksh
to warn the user x=$((expr)) is slower than ((x=expr)). This
improvement has been backported with a modified warning:
# Result from this commit
$ ksh -n -c 'x=$((1 + 2))'
ksh: warning: line 1: x=$((1 + 2)) is slower than ((x=1 + 2))
# Result from ksh93v-
$ ksh93v -n -c 'x=$((1 + 2))'
ksh93v: warning: line 1: ((x=1 + 2)) is more efficient than x=$((1 + 2))
Minor note: the ksh93v- patch had an invalid use of memcmp; this
version of the patch uses strncmp instead.
References:
be548e87bchttps://code.illumos.org/c/illumos-gate/+/1834/comment/65722363_22fdf8e7/
The "fd is first arg to poll()" and "fd is second arg to poll()" tests
use write() but don't include the system header in which that function
is declared, leading to "error: implicit declaration of function 'write'
is invalid in C99'" when trying to compile the test. By including the
header, the test can now compile and run as intended.
The "mmap is worth using" test uses memcpy but doesn't include the
system header in which that function is declared, leading to
"error: implicitly declaring library function 'memcpy'" when trying
to compile the test. By including the header, the test can now
compile and run as intended.
On macOS, the result is still negative. The test seems to time
using mmap and another method and only picks mmap if it's faster.
Editing the test to print out timing information on a few runs, I
see that mmap is 2–3✕ slower than the other method:
$ for i in $(seq 1 5); do ./mmap_worth_using; done
/* mmtm=11 rdtm=3 */
/* 4*mmtm=44 3*rdtm=9 */
/* 4*mmtm=44 5*rdtm=15 */
/* mmtm=9 rdtm=5 */
/* 4*mmtm=36 3*rdtm=15 */
/* 4*mmtm=36 5*rdtm=25 */
/* mmtm=10 rdtm=4 */
/* 4*mmtm=40 3*rdtm=12 */
/* 4*mmtm=40 5*rdtm=20 */
/* mmtm=12 rdtm=4 */
/* 4*mmtm=48 3*rdtm=12 */
/* 4*mmtm=48 5*rdtm=20 */
/* mmtm=12 rdtm=4 */
/* 4*mmtm=48 3*rdtm=12 */
/* 4*mmtm=48 5*rdtm=20 */
If you passed CC=/some/compiler, the build broke on macOS because the
cc.darwin compiler wrapper wasn't used. Among other things, this
wrapper adds a -D_lib_memccpy flag, defining _lib_memccpy as 1
during the build. That was used to override a false negative result
of the lib_memccpy feature test. This commit fixes that feature
test instead, so it correctly returns positive on macOS.
Thanks to Ryan Smith (@ryandesign) for the bug report and for the
fix to the lib_memccpy test.
src/lib/libast/features/lib:
- Fix the lib_memccpy feature test. It was checking the result of
mmap(2) incorrectly, resulting in the test crashing on macOS.
Failure does not return NULL, it returns MAP_FAILED which is
usually -1.
src/cmd/INIT/cc.darwin*:
- Removed. Any other flags in these wrappers are either related to
building dynamic libraries, which is not currently supported, or
were determined to be unnecessary. See the GitHub issue for
discussion. This now makes it possible to pass `CC` to use any
compiler you like on the Mac. Notes:
- Apple's -D_ast_int8_t=int64_t is a no-op; another AST feature
test already defines _ast_int8_t a 64-bit integer type, even on
32-bit systems (on which it is defined as 'long long').
- The -search_paths_first linker flag is the default since 2010.
But even on my museum-grade Power Mac G5 with Mac OS X 10.3
(from 2004), it builds and runs just fine without.
- DCLK_TCK=100 is a no-op as even that ancient Mac system already
defines it as 100. Plus, it's not even actually used.
If a need is found for any of these, please report this in a new
issue so I can special-case it elsewhere in the code.
Resolves: https://github.com/ksh93/ksh/issues/373
*** Crash 1: ***
ksh crashed if the PS1 prompt contains one or more command
substitutions and you enter a multi-line command substitution
on the command line, then interrupt while on the PS2 prompt.
$ ENV=/./dev/null /usr/local/bin/ksh -o emacs
$ PS1='$(echo foo) $(echo bar) $(echo baz) ! % '
foo bar baz 16999 % echo $(
> true <-- here, press Ctrl+C instead of Return
Memory fault
The crash occurred due to a corrupted lexer state while trying to
display the PS1 prompt.
Analysis: My fix for the crashing bug with Ctrl+C in commit
3023d53b is incorrect and only worked accidentally. sh_fault() is
not the right place to reset the lexer state because, when we press
Ctrl+C on a PS2 prompt, ksh had been waiting for input to finish
lexing a multi-line command, so sh_lex() and other lexer functions
are on the function call stack and will be returned to.
src/cmd/ksh93/sh/fault.c: sh_fault():
- Remove incorrect SIGINT fix.
src/cmd/ksh93/sh/io.c: io_prompt():
- Reset the lexer state immediately before printing every PS1
prompt. Even in situations where this is redundant it should be
perfectly safe, the overhead is negligible, and it resolves this
crash. It may pre-empt other problems as well.
*** Crash 2: ***
If an INT trap is set, and you start entering a multi-line command
substitution, then press Ctrl+C on the PS2 prompt to trigger the
crash, the lexer state is corrupted because the lexer is invoked to
eval the trap action. A crash then occurs on entering the final ')'
of the command substitution.
$ trap 'echo TRAPPED' INT
$ echo $(
> trueTRAPPED <-- press Ctrl+C to output "TRAPPED"
> )
Memory fault
Technically, as SIGINT is trapped, it should not interrupt, so ksh
should execute the trap, then continue with the PS2 prompt to let
the user finish inputting the command. But I have been unsuccessful
in many different attempts to make this work properly. I managed to
get multi-line command substitutions to lex correctly by saving and
restoring the lexer state, but command substitutions were still
corrupted at the parser and/or execution level and I have not
managed to trace the cause of that.
My testing showed that all other shells interrupt the PS2 prompt
and return to PS1 when the user presses Ctrl+C, even if SIGINT is
trapped. I think that is a reasonable alternative, and it is
something I managed to make work.
src/cmd/ksh93/sh/fault.c: sh_chktrap():
- Immediately after invoking sh_trap() to run a trap action, check
if we're in a PS2 prompt (sh.nextprompt == 2). If so, assume the
lexer state is now overwritten. Closing the fcin stream with
fcclose() seems to reliably force the lexer to stop doing
anything else. Then we can just reset the prompt to PS1 and
invoke sh_exit() to start new command line, which will now reset
the lexer state as per above.
ksh crashed if you pressed Ctrl+C or Ctrl+D on a PS2 prompt while
you haven't finished entering a $(command substitution). It
corrupts subsequent command substitutions. Sometimes the situation
recovers, sometimes the shell crashes.
Simple crash reproducer:
$ PS1="\$(echo foo) \$(echo bar) \$(echo baz) > "
foo bar baz > echo $( <-- now press Ctrl+D
> ksh: syntax error: `(' unmatched
Memory fault
The same happens with Ctrl+C, minus the syntax error message.
The problem is that the lexer state becomes inconsistent when the
lexer is interrupted in the middle of reading a command
substitution of the form $( ... ). This is tracked in the
'lexd.dolparen' variable in the lexer state struct.
Resetting that variable is sufficient to fix this issue. However,
in this commit I prefer to just reinitialise the lexer state
completely to pre-empt any other possible issues. Whether there was
a syntax error or the user pressed Ctrl+C, we just interrupted all
lexing and parsing, so the lexer *should* restart from scratch.
src/cmd/ksh93/sh/fault.c: sh_fault():
- If the shell is in an interactive state (e.g. not a subshell) and
SIGINT was received, reinitialise the lexer state. This fixes the
crash with Ctrl+C.
src/cmd/ksh93/sh/lex.c: sh_syntax():
- When handling a syntax error, reset the lexer state. This fixes
the crash with Ctrl+D.
NEWS:
- Also add the forgotten item for the previous fix (re: 2322f939).
This reverts c0334e32, thereby restoring 936a1939.
After the fixes in 0a343244 and a2bc49be, the tilde expansion
disciplines work nicely, so they can come back to the 1.0 branch.
This should fix various crashes that remain, at least:
* when running a PS2 discipline at parse time
* when pressing Ctrl+C on a PS2 prompt
* when a special builtin within a discipline throws an error within
a virtual subshell
src/cmd/ksh93/sh/nvdisc.c:
- In both assign() which handles .set disciplines and lookup()
which handles .get disciplines, to stop errors in discipline
functions from wreaking havoc:
- Save, reinitialise and restore the lexer state in case the
discipline is run at parse time. This happens with PS2; I'm not
currently aware of other contexts but that doesn't mean there
aren't any or that there won't be any. Plus, I determined by
experimenting that doing this here seems to be the only way to
make it work reliably. Thankfully the overhead is low.
- Check the topfd redirection state and run sh_iorestore() if
needed. Without this, if a special builtin with a redirection
throws an error in a discipline function, its redirection(s)
remain permanent. For example, 'trap --bad-option 2>/dev/null'
in a PS2.get() discipline would kill standard error, including
all your prompts.
src/cmd/ksh93/sh/io.c: io_prompt():
- Before getting the value of the PS2 prompt, save the stack state
and restore it after. This stops a PS2.get discipline function
from corrupting a command substitution that the user is typing.
Doing this in assign()/lookup() is ineffective, so do it here.
Fixes: https://github.com/ksh93/ksh/issues/347
- tests/basic.sh: Fix a regression test that was failing under dtksh by
allowing the error message to name ksh 'lt-dtksh'. Additionally, fix
the test's inaccurate failure message (a version string is not what
the regression test expects).
- test/builtins.sh: Exclude the expr builtin from the unrecognized
options test because it's incompatible. Additionally, put the
unrecognized options test inside of a function to ensure that it works
with the future local builtin (https://github.com/ksh93/ksh/issues/123).
- tests/io.sh: The long seek test may fail to seek past the 2 GiB
boundary on 32-bit systems, so only allow it to run on 64-bit.
References:
3222ac2b59/f/ksh-1.0.0-beta.1-regre-tests.patcha5c692e1bd
- tests/substring.sh: Add a regression test for the ${.sh.match}
crashing bug fixed in commit 1bf1d2f8.
src/cmd/ksh93/sh/Mamfile:
- For edit/edit.c, add include/shlex.h (re: f99ce517).
- For sh/shcomp.c, add include/{path,terminal}.h (re: 141fa68e).
Thanks to @JohnoKing for flagging these up.
Once upon a time it might have been possible to build certain parts
of ksh, such as the emacs and vi editors and possibly even the
name/value library (nval(3)) as independent libraries. But given
the depressing amount of bit rot in the code that we inherited, I
am certain that disabling either of these macros had been resulting
in a broken build for many years before AT&T abandoned this code
base. These are certainly not going to be useful now.
Meanwhile the KSHELL macro got in the way of me today, because the
Mamfile did not define it for all the .c files, but some headers
declared some functionality conditionally upon that macro. So
including <io.h> in, e.g., nvdisc.c did not declare the same
functions as including that header in files with KSHELL defined.
This inconsistency is now gone as well, for various files.
I'm currently working on making it possible once again to build
libshell as a dynamic library; that should be good enough. And that
never involved disabling either of these macros.
The head and tail builtins don't correctly handle files that lack
newlines[*]:
$ print -n foo > /tmp/bar
$ /opt/ast/bin/head -1 /tmp/bar # No output
$ print -n 'foo\nbar' > /tmp/bar
$ /opt/ast/bin/tail -1 /tmp/bar
foo
bar$
This commit backports the required changes from ksh93v- to handle files
without a newline in the head and tail builtins. (Also note that the
required fix to sfmove was already backported in commit 1bd06207.)
src/lib/libcmd/{head,tail}.c:
- Backport the relevant ksh93v- code for handling files
without newlines.
src/cmd/ksh93/tests/builtins.sh:
- Add a few regression tests for using 'head -1' and 'tail -1' on a file
missing and ending newline.
[*]: https://www.illumos.org/issues/4149
List of changes:
- Fixed some -Wuninitialized warnings and removed some unused variables.
- Removed the unused extern for B_login (re: d8eba9d1).
- The libcmd builtins and the vmalloc memfatal function now handle
memory errors with 'ERROR_SYSTEM|ERROR_PANIC' for consistency with how
ksh itself handles out of memory errors.
- Added usage of UNREACHABLE() where it was missing from error handling.
- Extend many variables from short to int to prevent overflows (most
variables involve file descriptors).
- Backported a ksh2020 patch to fix unused value Coverity issues
(https://github.com/att/ast/pull/740).
- Note in src/cmd/ksh93/README that ksh compiles with Cygwin on
Windows 10 and Windows 11, albeit with many test failures.
- Add comments to detail some sections of code. Extensive list of
commits related to this change:
ca2443b5, 7e7f1372, 2db9953a, 7003aba4, 6f50ff64, b1a41311,
222515bf, a0dcdeea, 0aa9e03f, 61437b27, 352e68da, 88e8fa67,
bc8b36fa, 6e515f1d, 017d088c, 035a4cb3, 588a1ff7, 6d63b57d,
a2f13c19, 794d1c86, ab98ec65, 1026006d
- Removed a lot of dead ifdef code.
- edit/emacs.c: Hide an assignment to avoid a -Wunused warning. (See
also https://github.com/att/ast/pull/753, which removed the assignment
because ksh2020 removed the !SHOPT_MULTIBYTE code.)
- sh/nvdisc.c: The sh_newof macro cannot return a null pointer because
it will instead cause the shell to exit if memory cannot be allocated.
That makes the if statement here a no-op, so remove it.
- sh/xec.c: Fixed one unused variable warning in sh_funscope().
- sh/xec.c: Remove a fallthrough comment added in commit ed478ab7
because the TFORK code doesn't fall through (GCC also produces no
-Wimplicit-fallthrough warning here).
- data/builtins.c: The cd and pwd man pages state that these builtins
default to -P if PATH_RESOLVE is 'physical', which isn't accurate:
$ /opt/ast/bin/getconf PATH_RESOLVE
physical
$ mkdir /tmp/dir; ln -s /tmp/dir /tmp/sym
$ cd /tmp/sym
$ pwd
/tmp/sym
$ cd -P /tmp/sym
$ pwd
/tmp/dir
The behavior described by these man pages isn't specified in the ksh
man page or by POSIX, so to avoid changing these builtin's behavior
the inaccurate PATH_RESOLVE information has been removed.
- Mamfiles: Preserve multi-line errors by quoting the $x variable.
This fix was backported from 93v-.
(See also <https://github.com/lkujaw/ast/commit/a7e9cc82>.)
- sh/subshell.c: Remove set but not used sp->errcontext variable.
When a global EXIT trap is set, and a ksh-style function exits with
a status > 256 that could have been the result of a signal, then
the shell incorrectly issues that signal to itself. Depending on
the signal, this causes ksh to terminate itself ungracefully:
$ cat /tmp/exit267
trap 'echo OK' EXIT # This trap triggers the crash
function foo { return 267; }
foo
$ bash /tmp/exit267
OK
$ ksh-3aee10d7 /tmp/exit267
OK
$ ksh /tmp/exit267
Memory fault(coredump)
On most systems, status 267 corresponds to SIGSEGV. The reported
memory fault is not real; it results from ksh incorrectly killing
itself with that signal.
The problem is caused by two factors:
1. As of 93u+ 2012-08-01, ksh explicitly allows 'return' to use an
exit status corresponding to a signal (from 257 to end of signal
range). The rest of the integer range is trunctated to 8 bits.
This is contrary to both 'man ksh' and 'return --man' which both
say it's always truncated to 8 bits. Plus, combined with point 2
below, this new behaviour is nonsensical, as 'return' has no
business actually generating signals. However, a couple of
regression tests now depend on this, as may some scripts.
2. When a ksh-style function does not handle a signal, the signal
is passed down to the parent environment and ksh does this by
reissuing the signal to its own process after leaving the
function scope. However, it does this by checking the exit
status, which is very bad practice as there is no guarantee
that an exit status corresponding to a signal was in fact
produced by a signal, particularly after they changed the
behaviour of 'return' per 1 above.
This commit fixes both issues. It also takes a proper decision on
allowable 'return' exit status arguments. Since 93u+ was released
nearly a decade ago and some scripts may now rely on being able to
pass certain exit statuses out of the 8-bit range, we should not
disallow this now. But neither should we be half-hearted in
allowing only some arbitrary selection of 9-bit statuses; 'return'
values categorically should have nothing to do with signals, so
this is no basis for limiting them. We're now allowing the full
unsigned integer range, which is usually 32 bits. This is like zsh,
and may create some interesting possibilities for scripts.
Just don't forget that $? will still lose all but its 8 least
significant bits when leaving the current (sub)shell environment.
src/cmd/ksh93/sh/xec.c: sh_funscope():
- Fix passing down unhandled signals from interrupted ksh functions
(jumpval==SH_JMPFUN) to the parent environment. Do not pay any
attention to the exit status. Instead, use sh.lastsig (a.k.a.
shp->lastsig). It is set by sh_fault() in fault.c for just this
purpose and contains the last signal handled for the current
command. It is reset in sh_exec() before running any new command.
So if it contains a signal, that is the one that interrupted the
ksh function, so it's the correct one to pass down. (Further
evidence: sh_subshell() was already using this in the same way.)
src/cmd/ksh93/bltins/cflow.c: b_return():
- Allow any signed int return value when invoked as and behaving
like 'return'.
- Add warning if a passed value is out of int range. Set the exit
status to 128 in that case; int overflow is undefined behaviour
in C and we want consistent behaviour across platforms. It should
be safe enough to check if the long and int values are equal.
- Refactor for clarity.
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- If a function returns with a status out of the 8 bit range in a
virtual subshell, this status could be passed down to the parent
shell in full. However, if the subshell forks, then the kernel
will enforce an 8-bit exit status. That is inconsistent. Scripts
should not be able to tell the difference between forked and
non-forked subshells, so artificially enforce that limit here.
Other changed files:
- Documentation updates and copy-edits.
- Update an AT&T functions.sh regress test to allow arbitrary
integer return values for functions.
- Add regression tests based in part on @JohnoKing's reproducers.
- Rework some vaguely related regression tests to fail gracefully.
Thanks to Johnothan King for the report and the testing.
Fixes: https://github.com/ksh93/ksh/issues/364
In iffe tests, some C functions are found in system libraries, but
then are not declared by the system headers on some systems because
the expected standards macros aren't defined, causing the system
headers to hide the function declarations. This may cause warnings
about invalid implicit function declarations in some tests (which
only show up if you export IFFEFLAGS=-d1), but may also cause false
negative test results. The iffe tests should be given the same
environment that their test results are going to be used in.
libast's first-run and most central feature test, 'standards',
figures out what standards macros need to be used on the current
system to get the system headers to declare the expected
functionality. All code that links to libast depends on the header
generated by this feature test. So iffe should use this result for
the tests as well, as soon as it's available (which is early in
libast's compilation cycle).
Concrete example: on Cygwin, in src/cmd/builtin/features/pty, the
'lib ptsname' test detects ptsname(3) in the system library, but
the output{...}end block that uses the _lib_ptsname feature test
result throws an 'implicit function definition' warning because
Cygwin's stdlib.h does not define this function without the
appropriate standards macros being defined first.
src/cmd/INIT/iffe.sh:
- If ${INSTALLROOT}/src/lib/libast/FEATURE/standards is available,
incorporate it directly into iffe's own block of compiler
massaging macros. Do not use #include as the necessary -I flags
are not added for every test.
- Centrally define the iffe version once, not twice.
- Update and tweak getopts self-documentation (iffe --man).
- While we're here, add macOS/Darwin's DYLD_LIBRARY_PATH to the
supported dynamic library search variables. On macOS, this is
normally disabled by System Integrity Protection, plus this
distribution uses static libraries at build time, so this is for
completeness' sake and not much else. This was ported from
@lkujaw's fork: https://github.com/lkujaw/ast/commit/48ff05442994
(thanks to @JohnoKing for pointing it out).
src/lib/libast/features/standards:
- Add a comment. This is to update the file's timestamp, ensuring
that everything will be recompiled after this commit.
Another day, another attempt to quash regress test fails caused by
implausibly small memory "leaks".
Apparently, on later macOS versions, 'ps' got more unreliable, so
increase tolerance from 8 to 12 bytes. Maximum reported leaks.sh
failure was 188 KiB after 16384 iterations (11 bytes/iteration).
And on some Linux versions, /proc sometimes acts weird. The
following is apparently consistent on Arch Linux:
shcomp-leaks.ksh[177]: memory leak with read -C when using
<<< (leaked approx 65536 bytes after 4096 iterations)
...which is 16 bytes per iteration, still not large enough to make
a real leak plausible.
Resolves: https://github.com/ksh93/ksh/issues/363
src/lib/libast/features/standards:
- Add heuristic (u_long availability) for systems that hide rather
than reveal functionality in the presence of _POSIX_SOURCE, etc.
- Define _DARWIN_C_SOURCE, like _GNU_SOURCE, to enable the full
range of definitions on macOS systems.
- Due to the above, remove MACH (macOS)-specific hack.
- These changes ported from https://github.com/att/ast/pull/1492 -
thanks to Lev Kujawski (@lkujaw). His PR indicates that this
fixes the standards macros on UnixWare, too. Therefore, no longer
exclude UnixWare from standards macros (re: ff70c27f).
src/lib/libast/comp/conf.sh:
- Promote the 'op' member in Conf_t (struct Conf_s) from short to
int. This allows some Darwin/macOS values, now exposed, to fit
that would otherwise be truncated, namely:
_CS_DARWIN_USER_CACHE_DIR 65538
_CS_DARWIN_USER_DIR 65536
_CS_DARWIN_USER_TEMP_DIR 65537
Thus, the following AST getconf values are now correct on macOS:
$ /opt/ast/bin/getconf | grep ^DARWIN
DARWIN_USER_CACHE_DIR=/var/folders/nx/(REDACTED)/C/
DARWIN_USER_DIR=/var/folders/nx/(REDACTED)/0/
DARWIN_USER_TEMP_DIR=/var/folders/nx/(REDACTED)/T/
src/lib/libast/features/tty:
- Include <sys/ioctl.h> if available. This silences a compiler
warning in src/lib/libast/misc/procopen.c about an invalid
implicit declaration of ioctl(2).
The information about an out of memory error does not apply
to the version of the PR that was eventually committed since
it does not use getcwd() which might cause such an error.
See https://github.com/ksh93/ksh/pull/358#issuecomment-986294934
This change adds the -e flag to the cd builtin, as specified in
<https://www.austingroupbugs.net/view.php?id=253>. The -e flag is
used to verify if the the current working directory after 'cd -P'
successfully changes the directory, and returns with exit status 1
if the cwd couldn't be determined. Additionally, it causes all
other errors to return with exit status >1 (i.e., status 2 unless
ENOMEM occurs) if -e and -P are both active.
src/cmd/ksh93/bltins/cd_pwd.c:
- Add -e option to the cd builtin command. It verifies $PWD by
using test_inode() to execute the equivalent of [[ . -ef $PWD ]].
- The check for restricted mode has been moved after optget to
allow 'cd -eP' to return with exit status 2 when in restricted
mode. To avoid changing the previous behavior of cd when -e isn't
passed, extra checks have been added to prevent cd from printing
usage information in restricted mode.
src/cmd/ksh93/tests/builtins.sh:
- Add regression tests for the exit status when using the cd -P
flag with and without -e.
src/cmd/ksh93/data/builtins.c,
src/cmd/ksh93/sh.1:
- Document the addition of -e to the cd builtin.
This commit ports over two of Andy Fiddaman's bugfixes to conf.sh
on illumos:
- The compiler isn't passed on to an invocation of iffe. The bugfix is
from this commit: <https://github.com/citrus-it/ast/commit/63563232>
- The getconf builtin is missing several parameters on illumos.
Reproducer:
$ /opt/ast/bin/getconf ADDRESS_WIDTH
getconf: Invalid argument (ADDRESS_WIDTH) # Should output '64'
This bug occurs because conf.sh expects GNU sed and fails to work
properly with other sed implementations. The bugfix and original bug
report can be found here:
https://www.illumos.org/issues/14044https://github.com/citrus-it/ast/commit/ba443cfd
Vmalloc is incompatible with Cygwin, but the code to disable it on
Cygwin did not work properly, somehow causing the build to freeze
at a seemingly unrelated point (i.e., when iffe feature tests
attempt to write to sfstdout).
Vmalloc has wasted my time for the last time, so now it's getting
disabled by default even on development builds and you'll have to
pass -D_AST_vmalloc in CCFLAGS to enable it for testing purposes.
This commit has a few other build tweaks as well.
src/lib/libast/features/vmalloc:
- tst map_malloc: Remove no-op #if __CYGWIN__ block which was in
the #else clause of another #if __CYGWIN__ block.
- Output block ('cat{'):
- Instead of disabling vmalloc for certain systems, disable it
unless _AST_vmalloc is defined.
- To disable it, set _AST_std_malloc as well as _std_malloc, just
to be sure.
src/lib/libast/vmalloc/malloc.c:
- Remove ineffective Cygwin special-casing.
src/lib/libcmd/vmstate.c:
- This is only useful for vmalloc, so do not pointlessly compile it
if vmalloc is disabled.
src/lib/libast/man/vmalloc.3:
- Add deprecation notice.
Resolves: https://github.com/ksh93/ksh/issues/360
This patch fixes the crashes experienced when a discipline function
exited because of a signal or an error from a special builtin. The
crashes were caused by ksh entering an inconsistent state after
performing a longjmp away from the assign() and lookup() functions in
nvdisc.c. Fixing the crash requires entering a new context, then setting
a nonlocal goto with sigsetjmp(3). Any longjmps that happen while
running the discipline function will go back to assign/lookup, allowing
ksh to do a proper cleanup afterwards.
Resolves: https://github.com/ksh93/ksh/issues/346
If a bug is ever introduced that causes a [[ ... ]] operator to be
unhandled by the linter, we should at least avoid writing random
memory contents to standard error. In non-release builds, let's
abort() so the problem can be more easily backtraced.
This commit ports over two improvements to the shell linter from
illumos (original patch written by Andy Fiddaman). Links to the
relevant bug reports and the original patch:
https://www.illumos.org/issues/13601https://www.illumos.org/issues/13631c7b656fc71
The first improvement is to the lint warning for arithmetic
operators in [[ ... ]]. The ksh linter now suggests the correct
equivalent operator to use in ((...)). Example:
$ ksh -nc '[[ 30 -gt 25 ]]'
# Original warning
warning: line 1: -gt within [[ ... ]] obsolete, use ((...))
# New warning
warning: line 1: [[ ... -gt ... ]] obsolete, use ((... > ...))
The second improvement pertains to variable expansion in arithmetic
expressions. The ksh linter now suggests referencing variable names
directly:
$ ksh -nc 'integer foo=40; (($foo < 50 ))'
# Old warning
warning: line 1: variable expansion makes arithmetic evaluation less efficient
# New warning
warning: line 1: in '(($foo < 50))', using '$' is slower and can introduce rounding errors
src/cmd/ksh93/{data/lexstates,sh/lex,sh/parse}.c:
- Port the improved shell lint warnings from illumos to ksh93u+m.
- The original checks for arithmetic operators involved a bunch of
if statements with inefficient calls to strcmp(3). These were
replaced with a more efficient switch statement that avoids
strcmp.
This change fixes a crash that can occur after setting a KEYBD trap
then inputting a multi-line command substitution. The crash is
similar to issue #347, but it's easier to reproduce since it
doesn't require you to setup a kshrc file. Reproducer for the
crash:
$ ENV=/./dev/null ksh
$ trap : KEYBD
$ : $(
> true)
Memory fault(coredump)
The bugfix was backported (with considerable changes) from ksh93v-
2013-10-08. The crash was first reported on the old mailing list:
https://www.mail-archive.com/ast-users@lists.research.att.com/msg00313.html
src/cmd/ksh93/{include/shlex.h,sh/lex.c}:
- To fix this properly, we need sizeof(Lex_t) to work as expected
in edit.c, but that is thwarted by the _SHLEX_PRIVATE macro in
lex.c which shlex.h uses to add private structs to the Lex_t type
in lex.c only. So get rid of that _SHLEX_PRIVATE macro and make
those members part of the centrally defined struct, renaming them
to make it clear they're considered private to lex.c.
src/cmd/ksh93/edit/edit.c:
- Now that we can get its size, save and restore the shell lexing
context when a KEYBD trap is present.
src/cmd/ksh93/tests/pty.sh:
- Add a regression test for the KEYBD trap crash.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
Ksh segfaults on M1 Macs, apparently because Apple's compiler
optimizer can't cope with overriding bzero(3) with libast's
implementation (though it's nothing more than "memset(b, 0, n);").
Apple has disabled libast's bzero function since 2018-12-04:
https://opensource.apple.com/source/ksh/ksh-27/patches/src__lib__libast__comp__omitted.c.diff.auto.html
src/lib/libast/comp/omitted.c:
- Only fall back to the libast bzero function if the OS lacks an
implementation of bzero.
- Remove the bzero undef since this fallback is only reached if the
OS doesn't have bzero.
NEWS:
- Add compat info for macOS on ARM64. This notes that macOS
Monterey can now compile and run ksh, although there is one
regression test failure:
builtins.sh[345]: printf %H: invalid UTF-8 characters
(expected %3F%C2%86%3F%3F%3F; got %3F%C2%86%3F%3Fv%3F%3F)
Thanks to @DesantBucie for the report and the testing.
Resolves: https://github.com/ksh93/ksh/issues/329
This bug was first reported in <https://www.illumos.org/issues/7694>.
The time keyword currently overrides the errexit shell option,
allowing failing scripts to continue after an error:
$ cat 1.sh
#!/bin/sh
time false # This should cause the script to exit
echo FAILURE
true
$ ksh -o errexit 1.sh
real 0m0.00s
user 0m0.00s
sys 0m0.00s
FAILURE
src/cmd/ksh93/sh/xec.c:
- When the time keyword runs a command, pass the errexit state flag
to the sh_exec call. This state flag is required for ksh to exit
when a command fails while the errexit option is on.
src/cmd/ksh93/tests/basic.sh:
- Add a regression test based on the reproducer.
This reverts commit 2b9cbbbc8e.
This is not ready for prime time. Crashses when running a $PS2
discipline function. This needs fixing and more testing in
development before making it into the 1.0 branch. In the meantime,
that terrible problem with types is back, sorry about that.
This commit mitigates the effects of the hack explained in the
referenced commit so that dummy built-in command nodes added by the
parser for declaration/assignment purposes do not leak out into the
execution level, except in a relatively harmless corner case.
Something like
if false; then
typeset -T Foo_t=(integer -i bar)
fi
will no longer leave a broken dummy Foo_t declaration command. The
same applies to declaration commands created with enum.
The corner case remaining is:
$ ksh -c 'false && enum E_t=(a b c); E_t -a x=(b b a c)'
ksh: E_t: not found
Since the 'enum' command is not executed, this should have thrown
a syntax error on the 'E_t -a' declaration:
ksh: syntax error at line 1: `(' unexpected
This is because the -c script is parsed entirely before being
executed, so E_t is recognised as a declaration built-in at parse
time. However, the 'not found' error shows that it was successfully
eliminated at execution time, so the inconsistent state will no
longer persist.
This fix now allows another fix to be effective as well: since
built-ins do not know about virtual subshells, fork a virtual
subshell into a real subshell before adding any built-ins.
src/cmd/ksh93/sh/parse.c:
- Add a pair of functions, dcl_hactivate() and dcl_dehacktivate(),
that (de)activate an internal declaration built-ins tree into
which check_typedef() can pre-add dummy type declaration command
nodes. A viewpath from the main built-ins tree to this internal
tree is added, unifying the two for search purposes and causing
new nodes to be added to the internal tree. When parsing is done,
we close that viewpath. This hides those pre-added nodes at
execution time. Since the parser is sometimes called recursively
(e.g. for command substitutions), keep track of this and only
activate and deactivate at the first level.
- We also need to catch errors. This is done by setting libast's
error_info.exit variable to a dcl_exit() function that tidies up
and then passes control to the original (usually sh_exit()).
- sh_cmd(): This is the most central function in the parser. You'd
think it was sh_parse(), but $(modern)-form command substitutions
use sh_dolparen() instead. Both call sh_cmd(). So let's simply
add a dcl_hacktivate() call at the beginning and a
dcl_deactivate() call at the end.
- assign(): This function calls path_search(), which among many
other things executes an FATH search, which may execute arbitrary
code at parse time (!!!). So, regardless of recursion level,
forcibly dehacktivate() to avoid those ugly parser side effects
returning in that context.
src/cmd/ksh93/bltins/enum.c: b_enum():
- Fork a virtual subshell before adding a built-in.
src/cmd/ksh93/sh/xec.c: sh_exec():
- Fork a virtual subshell when detecting typeset's -T option.
Improves fix to https://github.com/ksh93/ksh/issues/256
Symptom:
$ ksh -c 'command enum -i P_t=(a b); P_t -A v=([f]=b); typeset -p v'
ksh: syntax error at line 1: `(' unexpected
Expected: no syntax error, and output of 'P_t -A v=([f]=b)'.
src/cmd/ksh93/sh/parse.c: check_typedef():
- For enum, skip over any possible 'command' prefixes before
pre-parsing options with optget (or, technically, skip anything
else that might come before 'enum', though I don't think anything
else is possible).
- The sh_addbuiltin() call at the end to pre-add the builtin
obtained the node pointer to the built-in and the node flags from
the parser tree. This did not work if a 'command' prefix was
present. However, we don't actually need this. For parsing
purposes, the BLT_DCL flag for a declaration built-in is
sufficient; this is what gets the parser to accept
assignment-arguments including parentheses. So just apply that.
In addition, let's point it to an actual dummy built-in, 'true'
(SYSTRUE), so that if a user does run something like 'if false;
then enum Foo_t=(...); fi', the leaked Foo_t dummy at least won't
do anything (not even crash).
When giving an invalid or incompatible option to a typeset option
equivalent command (former default alias) such as 'compound' or
'integer', the resulting usage messages are incorrect. Example:
$ ksh -c 'compound -T foo=(typeset -a bar[1]=23)'
ksh: compound: -T cannot be used with other options
Usage: compound [-bflmnprstuxACHS] [-a[[type]]] [-i[base]] [-E[n]]
[-F[n]] [-L[n]] [-M[mapping]] [-R[n]] [-X[n]]
[-h string] [-T[tname]] [-Z[n]] [name[=value]...]
Or: compound -f [name...]
Or: compound -m [name=name...]
Or: compound -n [name=name...]
Or: compound -T [tname[=(type definition)]...]
Help: compound [ --help | --man ] 2>&1
The error message is wrong (there were no other options) and some
of the listed usages are invalid, like 'compound -f'.
Typeset option equivalent commands should just use 'typeset' in all
their error messages to avoid confusion. This is done by setting
error_info.id to the name of the typeset builtin.
There is quite a bit of no-op code in the job_hup() function due
to conditions that always test false. This commit removes that code
and clarifies the rest, making the purpose of this function clear.
job_hup() (before 62cf88d0: job_terminate()) is called via
job_walk() by sh_done() in fault.c to issue SIGHUP, the "hang up"
signal, to every background job's process group when the current
session is ungracefully disconnected. (One way to trigger such a
disconnection is to forcibly terminate a ssh session by typing '~.'
on a new prompt.)
The bug that Solaris patch 260-22964338 fixed is that ksh then
killed all non-disowned jobs' process groups without considering
that ksh still remembers a job even when all its processes are
finished (have the P_DONE flag). In that condition, the process
group ID may well be reused by another process by now, so it is
dangerous to killpg() it; we risk killing unrelated processes!
This is *not* a hypothetical problem; the Solaris patch exists
because this happened to a Solaris customer. However, the bug
exists on all operating systems. It's rarely triggered but serious,
and it's more likely to occur on heavy workloads that re-use
process/group IDs a lot. And it's on every currently released
non-Solaris version of ksh93. Eesh.
src/cmd/ksh93/sh/jobs.c:
src/cmd/ksh93/include/jobs.h:
- Remove job_terminate() which was unused as of 62cf88d0.
It could have been fixed instead of replaced. Oh well.
- Refactor job_hup():
- Remove code that will never be executed because, at
those points, it is known that pw->p_pgrp != 0.
- Simplify the loop that checks that there is at least
one non-P_DONE process so it doesn't need a flag.
For documentation purposes, below is a reproducer for the bug
before the Solaris patch. It is rather involved.
1. Compile the C program below (cpid).
2. In one terminal, 'ssh localhost'.
3. Within the ssh session:
- 'exec -a-ksh /path/to/buggy/ksh' to get a ksh login shell.
- 'sleep 1 &' and let it finish. Note down the reported PID.
That is the one we will reuse. Let's say 26650.
4. In another terminal, run: ./cpid 26650 (the PID from the
previous step). Now wait until it says "PID 26650 is ready"; it
has now succeeded at re-using that PID, and will just sit there.
This process will never voluntarily terminate. If we have the
bug, the termination of this process will be the symptom.
5. In the first terminal, forcibly terminate the ssh session by
typing, on a new prompt: ~. (tilde, dot). This triggers the
buggy routine to issue SIGHUP to all of ksh's background jobs.
6. In the second terminal, the bug is reproduced if cpid has been
terminated, reporting 'waitpid return 26650, status 0x0001', so
ksh just killed this process that it had nothing to do with.
(Note that status 0x0001 refers to being killed by signal 1
which is SIGHUP.)
cpid.c follows (written by George Lijo, tweaked by me):
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
pid_t pid, rpid, opid;
int i, status, npid;
if (argc != 2)
{
fprintf(stderr, "Usage: cpid <PID to re-use>\n");
exit(1);
}
rpid = atoi(argv[1]);
opid = getpid();
for (;;)
{
if ((pid = fork()) == 0)
{
setpgrp();
pause();
_exit(0);
}
if (pid == rpid)
break;
kill(pid, SIGKILL);
waitpid(pid, NULL, 0);
if (opid < rpid && pid > rpid)
printf("Cannot create PID %d\n", rpid);
opid = pid;
}
printf("PID %d is ready\n", pid);
i = waitpid(pid, &status, 0);
printf("waitpid return %d, status 0x%4.4x\n", i, status);
return status;
}
Since the arithmetic recursion level only becomes incorrect when
an error interrupts the arithmetic subsystem, and all such error
messages call sh_exit(), it should be good enough to reset it
there, so we don't need to do that for nearly every sh_exec() run.
The -d flag implemented in the rm builtin is completely broken. No
matter what you do it refuses to remove directories, even if -r is
also passed. Reproducer:
$ mkdir /tmp/empty
$ PATH=/opt/ast/bin rm -d /tmp/empty
rm: /tmp/empty: directory
$ PATH=/opt/ast/bin rm -dr /tmp/empty
rm: /tmp/empty: directory not removed [Is a directory]
Additionally, the description of 'rm -d' in the man page contradicts
how it's specified in <https://www.austingroupbugs.net/view.php?id=802>.
The ksh93v- rm builtin fixed nearly all of these issues, so I've
backported it to 93u+m and applied one additional fix for 'rm -rd'.
src/lib/libcmd/rm.c:
- Backported the fixes from the ksh93v- rm builtin's -d flag when
used on empty directories.
- Backported the man page update for rm(1) from ksh93v-.
- The ksh93v- rm builtin had one additional bug that caused the -r
option to fail when combined with -d. This was fixed by
overriding -d if -r is also passed.
src/cmd/ksh93/tests/builtins.sh:
- Add regression tests for the rm builtin's -d option.
This function adds the NV_ADD flag to its 'flags' variable for
nv_serach() calls subject to some checks. However, every call that
uses that variable explicitly turns off the NV_ADD bit again.
A search in the ast-open-history repo reveals that this check
briefly made a difference between versions 2010-06-25 and
2010-08-11, but it's been a complete no-op ever since.
src/cmd/ksh93/sh/arith.c: scope():
- Remove no-op code.
- Resolve the constant expressions involving the 'flags' variable,
get rid of the variable, and just indicate the flag bitmasks
directly in the nv_search() calls.
- Detangle and split up the excessively long 'if' construct.
No change in behaviour.
Previously noticed by Kurtis Rader for ksh2020:
https://github.com/att/ast/commit/d5ce3b05
POSIXly, '.' loads only files, not functions.
This only applies to '.', not 'source' (which is not in POSIX).
src/cmd/ksh93/bltins/misc.c: b_source():
- For ksh function lookup, add an additional check that we're not
in POSIX mode and running the '.' (SYSDOT) builtin.
Defining a .sh.tilde.get or .sh.tilde.set discipline function to
extend tilde expansion works well as long as the discipline
function doesn't get interrupted (e.g. with Crtl+C) or produce an
error message. Either of those will cause the shell to become
unstable and crash.
This feature is now removed from the 1.0 branch as it is not ready
for prime time. It can return to a release branch if/when we manage
to fix it on the master branch.
Related: https://github.com/ksh93/ksh/issues/346
In 93v-/ksh2020, namespace defs in any function are a syntax error.
This commit blocks namespace defs for ksh functions only, at the
execution level. This follows some of AT&T original intention while
working around some of the known bugs with namespaces.
Related: https://github.com/ksh93/ksh/issues/325
