The Mac runner is still broken: intermittent pipe- and
signal-related regressions that do not occur on any real Mac.
https://github.com/ksh93/ksh/runs/1892358749
.github/workflows/ci.yml:
- Remove the macOS runner.
src/cmd/ksh93/tests/pty.sh:
- Do not skip pty tests if there is no tty. (On FreeBSD with no
tty, the tty builtin would need to be enabled in builtins.c.)
src/cmd/ksh93/tests/bracket.sh:
- Don't be noisy when skipping unavailable locales.
It is desirable to be able to run the tests on a system without
a functioning tty. Since this distribution comes with its own
pseudo-tty facility, pty, it should be possible to run the few
tests that require a tty on the pseudo-tty instead. I've verified
that they fail as expected on older ksh93.
Discussion: https://github.com/ksh93/ksh/pull/171
src/cmd/ksh93/tests/basic.sh,
src/cmd/ksh93/tests/bracket.sh:
- Remove tests that require a tty.
src/cmd/ksh93/tests/pty.sh:
- Put them here, adapted to work as interactive pty scripts.
src/cmd/ksh93/tests/shtests:
- No longer refuse to run if there is no functioning tty.
.github/workflows/ci.yml:
- Since the tests no longer require a tty, no longer use script(1)
to get a pseudo-tty. Let's see if this works...
- Re-enable the Mac runner (re: 14632361). Maybe it has improved.
src/cmd/ksh93/tests/leaks.sh: Read vsz from UnixWare's ps
UnixWare's ps reports an accurate virtual size, so collecting that is
preferable to trying to parse the real resident size.
The GitHub runners apparently provide a non-working /dev/tty. To
avoid failures and confusion, shtests shold refuse to run the tests
and tell people to use script(1) to simulate a tty. On Linux, it
goes like this:
script -q -e -c 'bin/shtests --your-options-here'
On macOS and FreeBSD, the invocation is:
script -q /dev/null bin/shtests --your-options-here
The NetBSD and OpenBSD variants of script(1) need different
invocations again. They also don't pass down the command's exit
status, so would need a workaround for that.
It would be nice if we could use pty for this as this comes with
the distribution, so would work the same on every OS, but it seems
to be broken for this use case.
src/cmd/ksh93/tests/shtest:
- Use 'test -t 1' with stdout (fd 1) redirected to /dev/tty to
ensure the tty is actually on a terminal.
src/cmd/ksh93/tests/basic.sh:
- Remove superflous check for tty. All tests run through shtests.
Resolves: https://github.com/ksh93/ksh/pull/171
src/cmd/ksh93/features/externs: ARG_EXTRA_BYTES detection:
- Improve detection of extra bytes per argument: on every loop
iteration, recalculate the size of the environment while taking
the amount extra bytes we're currently trying into account. Also
count arguments (argv[]) as they are stored in the same buffer.
On 64-bit Linux with glibc, this now detects 9 extra bytes per
argument instead of 8. An odd number (literally and figuratively)
but apparently it needs it; I do think my method is correct now.
On 64-bit Solaris and macOS, this still detects 8 extra bytes.
(On 64-bit Linux with musl C library, it detects 0 bytes. Nice.)
src/cmd/ksh93/sh/path.c: path_xargs():
- Remove the kludge subtracting twice the size of the environment.
With the feature test fixed, this should no longer fail on Linux.
- Take into account the size of the final null element in the
argument and environment lists.
src/cmd/ksh93/tests/path.sh:
- Do not use awk for the test due to breakage in the system awks
on Solaris/Illumos (hangs) and AIX & UnixWare (drops arguments).
Instead, use (wait for it...) ksh. It's a bit slower, but works.
src/cmd/ksh93/tests/bracket.sh:
- Read the list of installed locales to ensure the locale to be tested
actually exists on the system under test.
- Produce a warning diagnostic for skipped locales.
- Additionally test the en_US.ISO8859-1 and en_US.UTF-8 locales.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
src/cmd/ksh93/features/math.sh:
- Specify ast_float.h within iffehdrs instead of math.h, so that iffe
will pick up on macro substitutions within libast. This should make
any future efforts to remedy floating point behavior easier as well.
- Always include ast_float.h within the generated math header file,
not just on IA64 platforms.
src/cmd/ksh93/tests/arith.sh:
- Test pow(1.0,-Inf) and pow(1.0,NaN) for IEEE compliance as well.
- Test the exponentiation operator (**) in addition, as streval.c,
which processes the same, calls pow() separately.
src/lib/libast/features/float:
- Test the IEEE compliance of the underlying math library's pow()
function and substitute macros producing compliant behavior if
necessary.
If I haven't missed anything, this should make the non-interactive
aspects of job control in scripts work as expected, except for the
"<command unknown>" issue in the output of 'bg', 'fg' and 'jobs'
(which is not such a high priority as those commands are really
designed for interactive use).
Plus, I believe I now finally understand what these three are for:
* The job.jobcontrol variable is set to nonzero by job_init() in
jobs.c if, and only if, the shell is interactive *and* managed to
get control of the terminal. Therefore, any changing of terminal
settings (tcsetpgrp(3), tty_set()) should only be done if
job.jobcontrol is nonzero. This commit changes several checks for
sh_isoption(SH_INTERACTIVE) to checks for job.jobcontrol for
better consistency with this.
* The state flag, sh_isstate(SH_MONITOR), determines whether the
bits of job control that are relevant for both scripts and
interactive shells are active, which is mostly making sure that a
background job gets its own process group (setpgid(3)).
* The shell option, sh_isoption(SH_MONITOR), is just that. When the
user turns it on or off, the state flag is synched with it. It
should usually not be directly checked for, as the state may be
temporarily turned off without turning off the option.
Prior discussion:
https://www.mail-archive.com/austin-group-l@opengroup.org/msg06456.html
src/cmd/ksh93/bltins/typeset.c, src/cmd/ksh93/sh/args.c:
- Move synching the SH_MONITOR state flag with the SH_MONITOR
shell option from b_set() (the 'set' builtin) to sh_applyopts()
which is indirectly called from b_set() and is also used when
parsing the shell invocation command line. This ensures -m is
properly enabled in both scenarios.
src/cmd/ksh93/sh/jobs.c:
- job_init(): Do not refuse to initialise job control on
non-interactive shells. Instead, skip everything that should only
be done on interactive shells (i.e., everything to do with the
terminal). This function is now even more of a mess than it was
before, so refactoring may be desirabe at some point.
- job_close(), job_set(), job_reset(), job_wait(): Do not reset the
terminal process group (tcsetpgrp()) if job.jobcontrol isn't on.
src/cmd/ksh93/sh/xec.c:
- sh_exec(): TFORK: For SIGINT handling, check the SH_MONITOR
state flag, not the shell option.
- sh_exec(): TFORK: Do not turn off the SH_MONITOR state flag in
forked children. The non-interactive part of job control should
stay active. Instead, turn off the SH_INTERACTIVE state flag so
we don't get interactive shell behaviour (i.e. job control noise
on the terminal) in forked subshells.
- _sh_fork(), sh_ntfork(): Do not reset the terminal process group
(tcsetpgrp()) if job.jobcontrol isn't on. Do not turn off the
SH_MONITOR state flag in forked children.
src/cmd/ksh93/sh/subshell.c: sh_subfork():
- Do not turn off the monitor option and state in forked subshells.
The non-interactive part of job control should stay active.
src/cmd/ksh93/bltins/misc.c: b_bg():
- Check isstate(SH_MONITOR) instead of sh_isoption(SH_MONITOR) &&
job.jobcontrol before throwing a 'no job control' error.
This fixes a minor bug: fg, bg and disown could quietly fail.
src/cmd/ksh93/tests/jobs.sh:
- Add tests for 'fg' with job control IDs (%%, %1) in scripts.
- Add test checking that a background job launched from a subsell
with job control enabled correctly becomes the leader of its own
process group.
Makes progress on: https://github.com/ksh93/ksh/issues/119
Another longstanding whopper of a bug in basic ksh93 functionality:
run a ${ shared-state; } command substitution twice and job control
promptly loses track of all your running jobs. New jobs are tracked
again until you run another two shared-state command substitutions.
This is in at least 93t+, 93u-, 93u+, 93v- and ksh2020.
$ sleep 300 &
[1] 56883
$ jobs # OK
[1] + Running sleep 300 &
$ v=${ echo hi1; }
$ jobs # OK
[1] + Running sleep 300 &
$ v=${ echo hi2; }
$ jobs # Nothing!
$ fg
ksh: fg: no such job
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- The current environment number shp->curenv (a.k.a. sh.curenv) was
not being restored if the virtual subshell we're leaving is of
the shared-state command substitution variety as it was wrongly
considered to be part of the environment that didn't need
restoring. This caused it to be out of sync with shp->jobenv
(a.k.a. sh.jobenv) which did get restored from savedcurenv.
Restore both from savedcurenv at the same time for any subshell.
(How these numbers are used exactly remains to be discovered.)
src/cmd/ksh93/tests/jobs.sh:
- Added, with a test for this bug to start it off. There is no
other test script where job control fits, and a lot more related
fixes are anticipated: https://github.com/ksh93/ksh/issues/119
It was easier than expected to fix this one. The many regression
test failures caused by disabling it were all due to one bug:
'typeset -p' output broke when building without this option.
src/cmd/ksh93/sh/nvtree.c: nv_attribute():
- In this function to print the attributes of a name-value pair,
move four lines of code out of #if SHOPT_FIXEDARRAY...#endif that
were inadvertently moved into the #if block in ksh93 2012-05-18.
See the changes to nvtree.c in this multishell repo commit:
https://github.com/multishell/ksh93/commit/aabab56a
src/cmd/ksh93/data/builtins.c:
- Update/rewrite 'typeset -a' documentation.
- Make it adapt to SHOPT_FIXEDARRAY.
- Fix a few typos.
src/cmd/ksh93/tests/arrays2.sh:
- Only one regression test needs a SHOPT_FIXEDARRAY check.
.github/workflows/ci.yml:
- Disable SHOPT_FIXEDARRAY when regression-testing without SHOPTs.
- Enable xtrace, add ':' commands for traced comments. This should
make the CI runner output logs a little more readable.
Many compile-time options were broken so that they could not be
turned off without causing compile errors and/or regression test
failures. This commit now allows the following to be disabled:
SHOPT_2DMATCH # two dimensional ${.sh.match} for ${var//pat/str}
SHOPT_BGX # one SIGCHLD trap per completed job
SHOPT_BRACEPAT # C-shell {...,...} expansions (, required)
SHOPT_ESH # emacs/gmacs edit mode
SHOPT_HISTEXPAND # csh-style history file expansions
SHOPT_MULTIBYTE # multibyte character handling
SHOPT_NAMESPACE # allow namespaces
SHOPT_STATS # add .sh.stats variable
SHOPT_VSH # vi edit mode
The following still break ksh when disabled:
SHOPT_FIXEDARRAY # fixed dimension indexed array
SHOPT_RAWONLY # make viraw the only vi mode
SHOPT_TYPEDEF # enable typeset type definitions
Compiling without SHOPT_RAWONLY just gives four regression test
failures in pty.sh, but turning off SHOPT_FIXEDARRAY and
SHOPT_TYPEDEF causes compilation to fail. I've managed to tweak the
code to make it compile without those two options, but then dozens
of regression test failures occur, often in things nothing directly
to do with those options. It looks like the separation between the
code for these options and the rest was never properly maintained.
Making it possible to disable SHOPT_FIXEDARRAY and SHOPT_TYPEDEF
may involve major refactoring and testing and may not be worth it.
This commit has far too many tweaks to list. Notables fixes are:
src/cmd/ksh93/data/builtins.c,
src/cmd/ksh93/data/options.c:
- Do not compile in the shell options and documentation for
disabled features (braceexpand, emacs/gmacs, vi/viraw), so the
shell is not left with no-op options and inaccurate self-doc.
src/cmd/ksh93/data/lexstates.c:
- Comment the state tables to associte them with their IDs.
- In the ST_MACRO table (sh_lexstate9[]), do not make the S_BRACE
state for position 123 (ASCII for '{') conditional upon
SHOPT_BRACEPAT (brace expansion), otherwise disabling this causes
glob patterns of the form {3}(x) (matching 3 x'es) to stop
working as well -- and that is ksh globbing, not brace expansion.
src/cmd/ksh93/edit/edit.c: ed_read():
- Fixed a bug: SIGWINCH was not handled by the gmacs edit mode.
src/cmd/ksh93/sh/name.c: nv_putval():
- The -L/-R left/right adjustment options to typeset do not count
zero-width characters. This is the behaviour with SHOPT_MULTIBYTE
enabled, regardless of locale. Of course, what a zero-width
character is depends on the locale, but control characters are
always considered zero-width. So, to avoid a regression, add some
fallback code for non-SHOPT_MULTIBYTE builds that skips ASCII
control characters (as per iscntrl(3)) so they are still
considered to have zero width.
src/cmd/ksh93/tests/shtests:
- Export the SHOPT_* macros from SHOPT.sh to the tests as
environment variables, so the tests can check for them and decide
whether or how to run tests based on the compile-time options
that the tested binary was presumably compiled with.
- Do not run the C.UTF-8 tests if SHOPT_MULTIBYTE is not enabled.
src/cmd/ksh93/tests/*.sh:
- Add a bunch of checks for SHOPT_* env vars. Since most should
have a value 0 (off) or 1 (on), the form ((SHOPT_FOO)) is a
convenient way to use them as arithmetic booleans.
.github/workflows/ci.yml:
- Make GitHub do more testing: run two locale tests (Dutch and
Japanese UTF-8 locales), then disable all the SHOPTs that we can
currently disable, recompile ksh, and run the tests again.
The >;word and <>;word redirection operators cannot be used with
the 'exec' builtin, but the 'redirect' builtin (which used to be
an alias of 'command exec') permitted them. However, they do not
have the documented effect of the added ';'. So this commit blocks
those operators for 'redirect' as they are blocked for 'exec'.
It also tweaks redirect's error message if a non-redirection
argument is encountered.
src/cmd/ksh93/sh/parse.c: simple():
- Set the lexp->inexec flag for SYSREDIR (redirect) as well as
SYSEXEC (exec). This flag is checked for in sh_lex() (lex.c) to
throw a syntax error if one of these two operators is used.
src/cmd/ksh93/sh.1, src/cmd/ksh93/data/builtins.c:
- Documentation tweaks.
src/cmd/ksh93/sh/xec.c, src/cmd/ksh93/bltins/misc.c:
- When 'redirect' gives an 'incorrect syntax' (e_badsyntax) error
message, include the first word that was found not to be a valid
redirection. This is simply the first argument, as redirections
are removed from the arguments list.
src/cmd/ksh93/tests/io.sh:
- Update test to reflect new error message format.
Permanent redirections of that form broke in subshells when used
with the 'redirect' command, because I had overlooked one instance
where the new 'redirect' builtin needs to match the behaviour of
the 'exec' builtin.
src/cmd/ksh93/tests/io.sh: sh_exec():
- Do not restore file descriptors in (virtual) subshells for
'redirect' just as this isn't done for 'exec'.
src/cmd/ksh93/tests/io.sh:
- Add regression test for this bug.
- Complete the test for f9427909 which I committed prematurely.
Fixes: https://github.com/ksh93/ksh/issues/167
This is some nonsense: redirections that store a file descriptor
greater than 9 in a variable, like {var}<&2 and the like, stopped
working if brace expansion was turned off. '{var}' is not a brace
expansion as it doesn't contain ',' or '..'; something like 'echo
{var}' is always output unexpanded. And redirections and brace
expansion are two completely unrelated things. It wasn't documented
that these redirections require the -B/braceexpand option, either.
src/cmd/ksh93/sh/lex.c: sh_lex():
- Remove incorrect check for braceexpand option before processing
redirections of this form.
src/cmd/ksh93/COMPATIBILITY:
- Insert a brief item mentioning this.
src/cmd/ksh93/sh.1:
- Correction: these redirections do not yield a file descriptor >
10, but > 9, a.k.a. >= 10.
- Add a brief example showing how these redirections can be used.
src/cmd/ksh93/tests/io.sh:
- Add a quick regression test.
It was trivial to crash ksh by making an autoloaded function
definition file autoload itself, causing a stack overflow due to
infinite recursion. This commit adds loop detection that stops a
function that is being autoloaded from autoloading itself either
directly or indirectly, without removing the ability of autoloaded
function definition files to autoload other functions.
src/cmd/ksh93/sh/path.c: funload():
- Detect loops by checking if the path of a function to be
autoloaded was already added to a new internal static tree,
and if not, adding it while the function is being loaded.
src/cmd/ksh93/tests/path.sh:
- Add regression test.
- Tweak a couple of others to be freeze- and crash-proof.
NEWS:
- Add this fix + a forgotten entry for the previous fix (6f3b23e6).
Fixes: https://github.com/ksh93/ksh/issues/136
Reproducer from @Saikiran-m:
| ~# sh -c `perl -e 'print "a"x100000'`
| genunix: NOTICE: core_log: sh[1221] core dumped: /var/cores/core.sh.0.1602153496
| Memory fault(coredump)
The crash was in trying to decide whether the name was suitable for
autoloading as a function on $FPATH. This calls strmatch() to check
the name against a regex for valid function name. But the libast
regex code is not designed optimally and uses too much recursion,
limiting the length of the strings it's able to cope with.
src/cmd/ksh93/sh/path.c: path_search():
- Before calling strmatch(), check that the name is shorter than
256 bytes. The maximum length of file names on Linux and macOS is
255 bytes, so an autoload function can't have a name longer than
that anyway.
src/cmd/ksh93/tests/path.sh:
- Add test for this bug.
- Tweak 'command -x' test to not leave a hanging process on Ctrl+C.
Fixes: https://github.com/ksh93/ksh/issues/144
This fixes the following regressions marked TODO in attributes.sh:
$ typeset -L 13 bar; readonly bar; typeset -p bar
typeset -r -L 0 foo # exp.: typeset -r -L 13 foo
$ typeset -R 13 bar; readonly bar; typeset -p bar
typeset -r -R 0 bar # exp.: typeset -r -R 13 bar
$ typeset -Z 13 baz; readonly baz; typeset -p baz
typeset -r -Z 0 -R 0 baz # exp.: typeset -r Z 13 -R 13 baz
I've discovered that these were briefly fixed between fdb9781e (Red
Hat patch for typeset -xu/-xl) and 95fe07d8 (reversal of patch,
different -xu/-xl fix, but reintroduced these regressions).
src/cmd/ksh93/sh/name.c: nv_newattr():
- Replace check from 95fe07d8 with a new one that combines its
approach with that of fdb9781e: do not change size (and hence
return early) if NV_RDONLY and/or NV_EXPORT are the only
attributes that are changing.
src/cmd/ksh93/tests/attributes.sh:
- Enable the TODO regression tests.
This commit corrects how shortint was being applied to various
possible typeset variables in error. The short integer option
modifier 'typeset -s' should only be able to be applied if the
the variable is also an integer. Several issues were resolved
with this fix:
- 'typeset -s': created a short integer having an invalid base
of zero. 'typeset -s foo' created 'typeset -s -i 0 foo=0' and
now will result in an empty string.
- 'typeset -sL': previously resulted in a segmentation fault.
The following are the various incorrect 'typeset' instances
that have been fixed:
$ 'export foo; typeset -s foo; readonly foo; typeset -p foo'
(before) typeset -x -r -s -i 0 foo=0
( after) typeset -x -r foo
$ 'typeset -sL foo=1*2; typeset -p foo'
(before) Segmentation fault (core dumped)
( after) typeset -L 3 foo='1*2'
$ 'typeset -sR foo=1*2; typeset -p foo'
(before) typeset -s -i foo=2
( after) typeset -R 3 foo='1*2'
$ 'typeset -sZ foo=1*2; typeset -p foo'
(before) typeset -F 0 foo=2
( after) typeset -Z 3 -R 3 foo='1*2'
src/cmd/ksh93/bltins/typeset.c: b_typeset():
- Add conditional check within the 's' option to only
apply NV_SHORT as well as remove any NV_LONG flag
if NV_INTEGER flag was set.
- Relocate shortint conditional logic to the 'i' option.
src/cmd/ksh93/tests/attributes.sh:
- Adjust regression tests for '-s' and add '-si' check.
This fixes part of https://github.com/ksh93/ksh/issues/87:
Scalar arrays (-a) and associative arrays (-A) of a type created by
'enum' did not consistently block values not specified by the enum
type, yielding corrupted results.
An expansion of type "${array[@]}" yielded random numbers instead
of values for associative arrays of a type created by 'enum'.
This does not yet fix another problem: ${array[@]} does not yield
all values for associative enum arrays.
src/cmd/ksh93/bltins/enum.c: put_enum():
- Always throw an error if the value is not in the list of possible
values for an enum type. Remove incorrect check for the NV_NOFREE
flag. Whatever that was meant to accomplish, I've no idea.
src/cmd/ksh93/sh/array.c: nv_arraysettype():
- Instead of sh_eval()ing a shell assignment, use nv_putval()
directly. Also use the stack (see src/lib/libast/man/stk.3)
instead of malloc to save the value; it's faster and will be
auto-freed at some point. This shortens the function and makes it
faster by not entering into a whole new shell context -- which
also fixes another problem: the error message from put_enum()
didn't cause the shell to exit for indexed enum arrays.
src/cmd/ksh93/sh/name.c: nv_setlist():
- Apply a patch from David Korn that correctly sets the data type
for associative arrays, fixing the ${array[@]} expansion yielding
random numbers. Thanks to @JohnoKing for the pointer.
https://github.com/ksh93/ksh/issues/87#issuecomment-662613887https://www.mail-archive.com/ast-developers@lists.research.att.com/msg00697.html
src/cmd/ksh93/tests/enum.sh:
- Add tests checking that invalid values are correctly blocked for
indexed and associative arrays of an enum type.
Makes progress on: https://github.com/ksh93/ksh/issues/87
Turns out the assumption I was operating on, that Linux and macOS
align arguments on 32 or 64 bit boundaries, is incorrect -- they
just need some extra bytes per argument. So we can use a bit more
of the arguments buffer on these systems than I thought.
src/cmd/ksh93/features/externs:
- Change the feature test to simply detect the # of extra bytes per
argument needed. On *BSD and commercial Unices, ARG_EXTRA_BYTES
shows as zero; on Linux and macOS (64-bit), this yields 8. On
Linux (32-bit), this yields 4.
src/cmd/ksh93/sh/path.c: path_xargs():
- Do not try to calculate alignment, just add ARG_EXTRA_BYTES to
each argument.
- Also add this when substracting the length of environment
variables and leading and trailing static command arguments.
src/cmd/ksh93/tests/path.sh:
- Test command -v/-V with -x.
- Add a robust regression test for command -x.
src/cmd/ksh93/data/builtins.c, src/cmd/ksh93/sh.1:
- Tweak docs. Glob patterns also expand to multiple words.
This test depends on the correctness of the locale data provided
by the OS, and some installations are broken. Failures of this test
most likely do not represent a bug in ksh or libast.
This takes another small step towards disentangling the build
system from the old AT&T environment. The USAGE_LICENSE macros with
author and copyright information, which was formerly generated
dynamically for each file from a database, are eliminated and the
copyright/author information is instead inserted into the AST
getopt usage strings directly.
Repetitive license/copyright information is also removed from the
getopt strings in the builtin commands (src/lib/libcmd/*.c and
src/cmd/ksh93/data/builtins.c). There's no need to include 55
identical license/copyright strings in the ksh binary; one (in the
main ksh getopt string, shown by ksh --man) ought to be enough!
This makes the ksh binary about 10k smaller.
It does mean that something like 'enum --author', 'typeset
--license' or 'shift --copyright' will now not show those notices
for those builtins, but I doubt anyone will care.
It is not correct to save sh.ifstable (a.k.a. shp->ifstable) before
calling a function and then restore it after; this can cause field
splitting to malfunction. See 70368c57.
The change to init.c in the Red Hat patch applied in 18b3f4aa
(shp->ifstable[0] = S_EOF) appears to be sufficient.
src/cmd/ksh93/bltins/alarm.c:
- Revert save/restore of sh.ifstable.
src/cmd/ksh93/tests/builtins.sh:
- Tweak the regression test to work correctly on a slower machine,
i.e. a Raspberry Pi running FreeBSD 12.2 arm64 (thanks to hyenias
for providing testing access).
This commit resolves the following incorrect variable assignments:
$ unset a; typeset -uF a=2; typeset -p a
typeset -X a=0x1.0000000000p+1
$ unset a; typeset -Fu a=2; typeset -p a
typeset -X a=0x1.0000000000p+1
$ unset a; typeset -ulF a=2; typeset -p a
typeset -l -X a=0x1.0000000000p+1
$ unset a; typeset -Ful a=2; typeset -p a
typeset -l -X a=0x1.0000000000p+1
$ unset a; typeset -Eu a=2; typeset -p a
typeset -E -X a=2
$ unset a; typeset -Eul a=2; typeset -p a
typeset -l -E -X a=2
src/cmd/ksh93/bltins/typeset.c:
- If the unsigned option (-u) was provided in conjunction with a
floating point (-F) then due to a flag collision with NV_UNSIGN
and NV_HEXFLOAT both having the value of NV_LTOU caused the
floating point to become a hexadecimal floating point (-X) in
error. Also, if a -E option flag was followed with a -u option
then the resulting variable would be both a scientific notation
and a hexadecimal floating point at the same time.
src/cmd/ksh93/tests/attributes.sh:
- Add regression tests.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
An unquoted variable expansion evaluated in a DEBUG trap action
caused IFS field splitting to be deactivated in code executed after
the trap action. Thanks to Koichi Nakashima for the reproducer:
| v=''
| trap ': $v' DEBUG
| A="a b c"
| set -- $A
| printf '%s\n' "$@"
|
| Expected
|
| a
| b
| c
|
| Actual
|
| a b c
src/cmd/ksh93/sh/fault.c: sh_trap():
- Remove incorrect save/restore of sh.ifstable, the internal state
table for field splitting. This reverts three lines added in ksh
93t+ 2009-11-30. Analysis: As an expansion is split into fields
(macro.c, lines 2367-2471), sh.ifstable is modified. If that
happens within a DEBUG trap, any modifications in ifstable are
undone by the restoring memccpy, leaving an inconsistent state.
src/cmd/ksh93/COMPATIBILITY:
- Document the DEBUG trap fixes, particularly the incorrect
inheritance by subshells and functions that some scripts may now
rely on because this bug is so longstanding. (re: 2a835a2d)
src/cmd/ksh93/tests/basic.sh:
- Add relevant tests.
Resolves: https://github.com/ksh93/ksh/issues/155
TODO: add a -T (-o functrace) option as in bash, which should allow
subshells and ksh-style functions to inherit DEBUG traps.
P.S.: The very handy multishell repo allows us to use 'git blame'
to trace the origin of the recently fixed DEBUG trap bugs.
The off-by-one error causing various bugs, reverted in 2a835a2d,
was introduced in ksh 93t 2008-07-25:
https://github.com/multishell/ksh93/commit/8e947ccf
(fault.c, line 321)
The incorrect check causing the exit status bug, reverted in
d00b4b39, was introduced in ksh 93t 2008-11-04:
https://github.com/multishell/ksh93/commit/b1ade268
(fault.c, line 459)
The ifstable save/restore causing the field splitting bug, reverted
in this commit, was introduced in ksh 93t+ 2009-11-30:
https://github.com/multishell/ksh93/commit/53d9f009
(fault.c, lines 440, 444, 482)
So all the bugs reported in #155 were fixed by simply reverting
these specific changes. I think that they are some experiments that
the developers simply forgot to remove. I've suspected such a thing
multiple times before. ksh93 was developed by researchers who were
genius innovators, but incredibly sloppy maintainers.
Turns out the previous commit also fixed the bug that disables the
DEBUG trap if a redirection is used in a DEBUG trap action -- in
other words, that's the same bug.
src/cmd/ksh93/tests/basic.sh:
- Add test from the reproducer in the bug report.
Makes progress on: https://github.com/ksh93/ksh/issues/155
This trap failed to be restored correctly when being trapped in
a subshell, causing corruption or a crash when restoring the
parent shell environment's trap upon leaving the subshell.
Thanks to Koichi Nakashima for the report and reproducer.
src/cmd/ksh93/sh/fault.c: sh_sigreset():
- Fix an off-by-one error in the loop that restores the
pseudosignal traps.
src/cmd/ksh93/tests/basic.sh:
- Test overwriting the main shell trap in a subshell for all
pseudosignals.
Makes progress on: https://github.com/ksh93/ksh/issues/155
UnixWare's ps prefers to read psinfo (from the proc structure in
kernel memory) within /proc as an anti-Trojan horse measure.
Updates to argv[0] are still reflected within /proc/$pid/cmdline,
which is useful for diagnostic purposes.
src/cmd/ksh93/sh/main.c:
- Remove __USLC__ from the list of platforms excluded from the
fixargs method.
src/cmd/ksh93/tests/basic.sh:
- Read /proc/$pid/cmdline instead of ps on UnixWare.
What is this for? See cefe087d
src/cmd/ksh93/Mamfile:
- Make iffe generate a test for the presence of setproctitle(3).
src/cmd/ksh93/sh/main.c:
- Include setproctitle test result.
- Re-enable fixargs() for FreeBSD and DragonFly BSD.
Disable it for UnixWare.
- fixargs(): Add _lib_setproctitle version. Keep it simple with a
128-character buffer array -- should be plenty for 'ps' output.
- fixargs(): Fix an off-by-one in zeroing the rest of the buffer.
src/cmd/ksh93/tests/basic.sh:
- Update the relevant regression test to run on FreeBSD/DragonFly
and tolerate the "ksh: " prefix added by setproctitle(3).
This adds informative error messages if incompatible options are
given. It also documents the exclusive -m, -n and -T options on
separate usage lines, as was already done with -f. The usage
message for incompatible options now looks something like this:
| $ ksh -c 'typeset -L10 -F -f -i foo'
| ksh: typeset: -i/-F/-E/-X cannot be used with -L/-R/-Z
| ksh: typeset: -f cannot be used with other options
| Usage: typeset [-bflmnprstuxACHS] [-a[type]] [-i[base]] [-E[n]]
| [-F[n]] [-L[n]] [-M[mapping]] [-R[n]] [-X[n]]
| [-h string] [-T[tname]] [-Z[n]] [name[=value]...]
| Or: typeset -f [name...]
| Or: typeset -m [name=name...]
| Or: typeset -n [name=name...]
| Or: typeset -T [tname[=(type definition)]...]
| Help: typeset [ --help | --man ] 2>&1
(see also the previous commit, e21a053e)
Unfortunately the first "Usage" line has some redundancies with the
"Or:" lines showing separate usages. It doesn't seem to be possible
to avoid this; it's a flaw in how libast generates everything
(usage, help, manual) from one huge getopt(3) string. I still think
the three added "Or:" lines are an improvement as it wasn't
previously shown that these options need to be used on their own.
src/cmd/ksh93/bltins/typeset.c: b_typeset():
- Instead of only showing a generic usage message, add an
informative error message if incompatible options were given.
- Conflicting options detection was failing because NV_LJUST and
NV_EXPNOTE have the same bitmask value. Use a new 'isadjust'
flag for -L/-R/-Z to remember if one of these was set.
- Detect conflict between -L/-R/-Z and a float option, not just -i.
src/cmd/ksh93/include/name.h, src/cmd/ksh93/data/msg.c:
- Add the two new error messages for incompatible options.
src/cmd/ksh93/data/builtins.c: sh_opttypeset[]:
- Add a space after 'float' in in "[+float?\btypeset -lE\b]" as
this makes 'float' appear on its own line, improving formatting.
- Show -m, -n, -T on separate usage lines like -f, as none of these
can be combined with other options.
- Remove "cannot be combined with other options" from -m and -n
descriptions, as that should now be clear from the separate usage
lines -- and even if not, the error message is now informative.
src/cmd/ksh93/sh.1, src/cmd/ksh93/COMPATIBILITY:
- Update.
src/cmd/ksh93/tests/types.sh:
- Remove obsolete test: 'typeset -RF' is no longer accepted.
(It crashed in 93u+, so this is not an incompatibility...)
Resolves: https://github.com/ksh93/ksh/issues/48
For example, this changes 'typeset -Q' (a bad option) from:
| ksh: typeset: -Q: unknown option
| Usage: typeset [-bflmnprstuxACHS] [-a[type]] [-i[base]] [-E[n]]
| [-F[n]] [-L[n]] [-M[mapping]] [-R[n]] [-X[n]]
| [-h string] [-T[tname]] [-Z[n]] [name[=value]...]
| Or: typeset [ options ] -f [name...]
to:
| ksh: typeset: -Q: unknown option
| Usage: typeset [-bflmnprstuxACHS] [-a[type]] [-i[base]] [-E[n]]
| [-F[n]] [-L[n]] [-M[mapping]] [-R[n]] [-X[n]]
| [-h string] [-T[tname]] [-Z[n]] [name[=value]...]
| Or: typeset -f [name...]
| Help: typeset [ --help | --man ] 2>&1
src/lib/libast/misc/optget.c: args():
- Revert the changes done in 6916a873 and ae92cd89. The --help and
--man labels weren't added consistently (they did not show up in
the example above) whereas they did show up unnecessarily in the
manual page itself.
- In the usage section and usage messges, only show an [ options ]
label on the first usage line; don't redundantly repeat on second
and further ("Or:") lines.
- In usage and --help (but not --man), add a new "Help:" line
telling the user about the --help and --man options. This
replaces the reverted changes. Show the 2>&1 redirection as a
reminder that you need to do this to pipe it into a pager, as
everything is written to standard error!
- Add some comments clarifying what I think this code does...
src/cmd/ksh93/tests/builtins.sh:
- Update to match changes in getopts usage output.
This fixes the following:
trap ':' DEBUG
r=$(exit 123)
echo $? # Expected 123, but actually 0.
Thanks to Koichi Nakashima for the report and reproducer.
src/cmd/ksh93/sh/fault.c: sh_trap():
- Restore the saved current exit status (exitval) for all traps.
Do not except the DEBUG trap from doing that. I've no idea why
this exception was made, but it's not correct.
src/cmd/ksh93/tests/basic.sh:
- Add tests.
Makes progress on: https://github.com/ksh93/ksh/issues/155
Commit d1483150 did not fully fix#153.
Test case from Harald van Dijk that was still failing:
$ mkdir test
$ cd test
$ rmdir $PWD
$ mkdir $PWD
$ ksh -c "(cd /); pwd"
/
Forking a virtual subshell in that case is needed to avoid ending
up in a directory that replaced the PWD, because it will not be
possible for a process to change back to the original directory.
src/cmd/ksh93/bltins/cd_pwd.c:
- When deciding whether to fork, instead of attempting to opendir
the PWD, compare the inodes $PWD and "." to determine if $PWD
still actually refers to the current directory. This uses the
test_inode() function which is also used by 'test foo -ef bar'.
src/cmd/ksh93/tests/subshell.sh:
- Add test based on the above.
Progresses: https://github.com/ksh93/ksh/issues/153
src/cmd/ksh93/tests/variables.sh:
- Fork the subshell with the test that includes unsetting LINENO
and changing its type. Otherwise, some side effect of that leaks
out of the subshell, messing up $LINENO. This is a bug, but it's
low priority -- we may get to it someday. Marked with a TODO.
- Do the LC_* tests in their own subshell. Skip them if changing
LANG to an invalid value does not produce a diagnostic message.
This occurs on OpenBSD and Alpine Linux (with musl libc). It
looks like their C libraries do not verify the locale, so
failures here are not a ksh problem; skip the tests in that case.
This commit also further mitigates the problems with restoring an
inaccessible or nonexistent PWD on exiting a virtual subshell.
Harald van Dijk writes:
> On a build of ksh with -fsanitize=undefined to help diagnose
> problems:
>
> $ mkdir deleted
> $ cd deleted
> $ rmdir ../deleted
> $ ksh -c '(cd /; (cd /)); :'
> /home/harald/ksh/src/cmd/ksh93/sh/subshell.c:561:22: runtime
> error: null pointer passed as argument 1, which is declared to
> never be null
> Segmentation fault (core dumped)
>
> Note that it segfaults the same with default compilation flags,
> but it does not print out the useful extra message. The code
> assumes that pwd is non-null and passes it to strcmp without
> checking, but it will be null if the current directory cannot be
> determined, for instance because it has been deleted.
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- Avoid the null pointer dereference reported above.
src/cmd/ksh93/bltins/cd_pwd.c: b_cd():
- Fork a virtual subshell even on systems with fchdir(2) if the
present working directory tests as inaccessible on invoking 'cd';
it may no longer exist and fchdir would fail to get a handle.
(For the test we have to opendir(3) the full path to the PWD and
not ".", as the latter may succeed even if the PWD is gone.)
src/cmd/ksh93/data/builtins.c:
- Update 'cd' version string.
Fixes: https://github.com/ksh93/ksh/issues/153
Related: https://github.com/ksh93/ksh/issues/141
This now makes ksh build on DragonFly BSD.
bin/package, src/cmd/INIT/package.sh:
- DragonFly also needs the -lm hack for LDFLAGS.
src/cmd/ksh93/sh/main.c, src/cmd/ksh93/tests/basic.sh:
- fixargs() doesn't work on DragonFly either
(re: 9b7c392a, 159fb9ee, cefe087d).
The following are backported from:
https://github.com/att/ast/issues/26#issuecomment-313927854https://github.com/att/ast/pull/19
src/lib/libast/comp/setlocale.c:
- Add missing #include <errno.h> since errno is used.
src/lib/libast/features/standards:
- Do not set any standards macros (_POSIX_SOURCE etc) on FreeBSD or
DragonflyBSD; they disable too much functionality on those.
src/lib/libast/features/wchar:
- Set _STDFILE_DECLARED on DragonFly, too.
src/lib/libast/include/sfio.h, src/lib/libast/include/sfio_t.h,
src/lib/libast/sfio/_sfopen.c, src/lib/libast/sfio/sfclrlock.c,
src/lib/libast/sfio/sfhdr.h, src/lib/libast/sfio/sfnew.c,
src/lib/libast/sfio/sfset.c:
- Rename SF_* macros to SFIO_* to avoid a conflict with system
headers.
src/lib/libast/string/strexpr.c:
- Rename error() to err() to avoid a conflict.
~- and ~+ are ksh93-specific tilde expansions that expand to
$OLDPWD and $PWD, respectively. On some systems, $OLDPWD is not set
on entry to the test script, because it is not exported to the
environment. This made it unset before any 'cd' was executed,
which (correctly) disabled ~- expansion.
src/cmd/ksh93/tests/basic.sh:
- Before testing 'cd ~-', make sure $OLDPWD is set by cd'ing to
/dev first (a directory guaranteed by POSIX).
src/cmd/ksh93/sh/main.c: fixargs():
- Erase the entire length of the command arguments buffer (the
space from argv[0] until environ[0]) so that remnants of longer
command arguments aren't left in 'ps' output when executing a
hashbang-ess script with a shorter command line.
- Disable fixargs() on FreeBSD. It has never had any effect on that
system; apparently it either requires another method to rewrite
arguments for 'ps' output purposes (which?) or it's not possible.
src/cmd/ksh93/tests/basic.sh:
- Skip the test if running on FreeBSD.
ksh 93u+ has a subshell leak bug where a variable exported in
function in a subshell is also visible in a different subshell.
This is long fixed in 93u+m, but there wasn't a regression test for
this particular bug yet, so this commit adds one.
