A multibyte character immediately following an expansion of a
single-character name, e.g. $1 through $9, $?, $-, etc. was
corrupted when in a UTF-8 locale, e.g.:
$ set -- foo; echo "$1テスト"
foo?スト
Prior discussion:
https://www.mail-archive.com/ast-users@lists.research.att.com/msg01060.htmlhttps://bugzilla.redhat.com/show_bug.cgi?id=1256495
src/cmd/ksh93/sh/macro.c:
- Apply a Red Hat patch by Paulo Andrade that avoids calling
fcmbget() if backtracking more than one byte might be required.
src/cmd/ksh93/tests/basic.c:
- Test "テスト" following expansion of "$1", "$?" and "$#".
Co-authored-by: Martijn Dekker <martijn@inlv.org>
Multidimensional associative arrays are created with an extra array
member named '0', which is set to no value. Reproducer:
$ typeset -A foo
$ typeset -A foo[bar]
$ typeset -p foo
typeset -A foo=([bar]=([0]='') )
The bugfix prevents nv_setarray from creating the extra '[0]' member
when an associative array is empty. This bug was discussed on the old
mailing list:
https://www.mail-archive.com/ast-developers@lists.research.att.com/msg01574.html
src/cmd/ksh93/sh/array.c:
- Do not allow the creation of an extra array member when an array
is empty.
src/cmd/ksh93/tests/arrays.sh:
- Add a regression test for creating multidimensional associative
arrays, but use the output from 'typeset -p' instead of fgrep.
When the classic fork/exec mechanism was used (via sh_fork()) to
run an external command from within a non-forking subshell, SIGINT
was blocked until that subshell was exited. If a subsequent loop
was run in the subshell, it became uninterruptible, e.g.:
$ arch/*/bin/ksh -c '(/usr/bin/true; while :; do :; done); exit'
^C^C^C^C^C
src/cmd/ksh93/sh/xec.c:
- sh_fork() did not reset the savesig variable in the parent part
of the fork when running in a virtual subshell. This had the
effect of delaying signal handling until exiting the subshell.
There is no reason for that subshell check that I can discern, so
this removes it.
I've verified that this causes no regression test failures
even when ksh is compiled with -DSHOPT_SPAWN=0 which means the
classic fork/exec mechanism is always used.
Fixes: https://github.com/ksh93/ksh/issues/86
src/cmd/ksh93/tests/builtins.sh:
- Sleep longer after forking a background job to give the OS more
time to launch it; this will hopefully avoid an intermittent
regression test failure on the Github CI runners.
Due to the mysterious workings of vmalloc(3), occasionally a
spurious leak result still showed up. The leak is always smaller
in bytes than the number of test iterations, so it can't be a leak
in the thing tested.
src/cmd/ksh93/tests/leaks.sh:
- Run each test N=512 times.
- Use a 'err_exit_if_leak' function to add a tolerance of N/4 (128)
bytes to each test result check.
Resolves: https://github.com/ksh93/ksh/issues/100
The following is quoted from Marcin Cieślak [*]:
When running under FreeBSD /bin/sh (and not ksh) we get spurious
file named '=' created in the root. This is because the "checksh"
function runs /bin/sh -c '(( .sh.version >= 20111111 ))' which
produces a "=" file with /bin/sh as a side effect.
Fixes https://github.com/ksh93/ksh/issues/13
bin/package,
src/cmd/INIT/package.sh:
- Fix the creation of a spurious '=' file by making sure the shell
has support for (( ... )) expressions.
.gitignore:
- Remove the '=' file entry since it no longer has a purpose.
[*]: https://bsd.network/@saper/103196289917156347
This bugfix is from Marcin Cieślak's fork of the INIT build
system. Before this bugfix, running 'bin/package host cpu'
on FreeBSD would always report one CPU core, even if the CPU
is multi-core:
$ ./bin/package host cpu
1
bin/package,
src/cmd/INIT/package.sh:
- Correctly report the number of CPUs on FreeBSD by using
'sysctl -n hw.ncpu'.
src/cmd/INIT/mamake.c:
- Fix a rare build error by applying Oracle's patch to increase
mamake's buffer size[*]. Description from the original patch:
The build of KornShell might spuriously fail
with the following error.
...
/usr/bin/ksh: line 40: syntax error at line 44: `else unmatched
mamake [lib/libast]: *** exit code 3 making ast.req
mamake: *** exit code 139 making lib/libast
The patch increases the buffer size of mamake to avoid
spurious build failures.
I can't reproduce build error, but this patch should be merged
anyway because OpenSUSE also increases mamake's buffer size
in a patch titled 'workaround-stupid-build-system.diff'[**].
This indicates that the build failure is a heisenbug that can
occur on at least Linux and Solaris.
[*]: 7cad9dae78
[**]: https://build.opensuse.org/package/view_file/shells/ksh/workaround-stupid-build-system.diff?expand=1
src/*/*/Mamfile,
src/lib/libast/Makefile:
- There were a few instances where the CCFLAGS and LDFLAGS were missing
in the Mamfiles and a Makefile. This commit fixes the problem by merging
the changes from Debian's blhc.diff patch:
f8fea737c9/debian/patches/blhc.diff
Related discussion:
https://github.com/ksh93/ksh/issues/95#issuecomment-664010969
src/cmd/ksh93/tests/leaks.sh:
- When ksh is compiled to use the system's malloc(3) instead of AST
vmalloc(3), the vmstate builtin returns either nothing or zero.
Detect this as a regression test failure and refuse to run tests.
- Tweak iterations. Tests don't need 500 or 1000 runs for vmstate.
src/cmd/ksh93/data/builtins.c:
- Do not compile in vmstate builtin when using system's malloc(3).
If an array or upper/lowercase variable was declared with a null
initial value within a virtual/non-forked subshell, like:
( typeset -a foo; ... )
( typeset -A foo; ... )
( typeset -l foo; ... )
( typeset -u foo; ... )
then the type declaration leaked out of the subshell into the
parent shell environment, though without any values that may
subsequently have been assigned.
src/cmd/ksh93/bltins/typeset.c: setall():
- When deciding whether to create a virtual subshell scope for a
variable, use sh_assignok(), which was actually designed for the
purpose, instead of _nv_unset(). This allows getting rid of a
tangled mess of special-casing that never worked quite right.
src/cmd/ksh93/tests/arrays.sh:
- Add regression tests checking that array declarations don't leak
out of virtual subshells.
src/cmd/ksh93/tests/attributes.sh:
- Add regression tests for combining the 'export' and 'readonly'
attributes with every other possible typeset attribute on unset
variables. This also includes a subshell leak test for each one.
Fixes: https://github.com/ksh93/ksh/issues/88
When a builtin is given an unrecognized option, the usage information
for that builtin should be shown as 'Usage: builtin-name options'. The
sleep and suspend builtins were an exception to this. 'suspend' would
not show usage information and sleep wouldn't exit on error:
$ suspend -e
/usr/bin/ksh: suspend: -e: unknown option
$ time sleep -e 1
sleep: -e: unknown option
real 0m1.00s
user 0m0.00s
sys 0m0.00s
src/cmd/ksh93/bltins/sleep.c:
- Show usage information and exit when sleep is given an unknown
option. This bugfix was backported from ksh2020: https://github.com/att/ast/pull/1024
src/cmd/ksh93/bltins/trap.c:
- Use the normal method of parsing options with optget to fix the
suspend builtin's test failure.
src/cmd/ksh93/tests/builtins.sh:
- Add the ksh2020 regression test for getting the usage information
of each builtin. Enable all /opt/ast/bin builtins in a subshell
since those should be tested as well (aside from getconf and uname
because those builtins fallback to the real commands on error).
Add support for multibyte characters to $IFS
This commit fixes BUG_MULTIBIFS, which had two bug reports in the ksh2020 branch.
src/cmd/ksh93/sh/macro.c:
- Backport Eric Scrivner's fix for multibyte IFS characters (slightly modified
for compatibility with C89). Explanation from https://github.com/att/ast/pull/737:
Previously, the varsub method used for the macro expansion of $param, ${param},
and ${param op word} would incorrectly expand the internal field separator (IFS)
if it was a multibyte character. This was due to truncation based on the
incorrect assumption that the IFS would never be larger than a single byte.
This change fixes this issue by carefully tracking the number of bytes that
should be persisted in the IFS case and ensuring that all bytes are written
during expansion and substitution.
Bug report: https://github.com/att/ast/issues/13
- Fixed another bug that caused multibyte characters with the same initial byte
to be treated as the same character by the IFS. This bug was occurring because
the first byte of a multibyte character wasn't being written to the stack when
the IFS delimiter had the same initial byte:
$ IFS=£
$ v='§'
$ set -- $v
$ v="${1-}"
$ echo "$v" | hd # The first byte should be c2, but it isn't due to the bug
00000000 a7 0a |..|
00000002
Bug report: https://github.com/att/ast/issues/1372
src/cmd/ksh93/tests/variables.sh:
- Add (reworked) regression tests from ksh2020 for the multibyte IFS bugs.
- Add a regression test for att/ast#1372 based on the reproducer.
The following explanation is mostly taken from Tomas Klacko's report on
the old mailing list (which also contains a C program reproducer) [*]:
1. When ksh starts a binary, it sets its environment variable "_"
to "*number*/path/to/binary". Where "number" is the pid of the
ksh process.
2. The binary forks and the child executes a suid root shell script
which begins with #!/bin/sh. For this bug to occur, ksh must be /bin/sh.
3. The ksh process interpreting the suid shell script leaves the "_"
variable as not set (nv_getval(L_ARGNOD) returns NULL) because
the "number" from step 1 is not the pid of its parent process.
4-5. Because "_" is not set and the script is suid root, an infinite
loop occurs because when the SHELL environment variable contains
"/bin/sh" pathshell() returns "/bin/sh". This becomes an infinite
loop of /bin/sh /dev/fd/3 executing /bin/sh /dev/fd/3.
src/cmd/ksh93/sh/init.c: get_lastarg():
- Disable the check for if the "number" refers to the process id of
the parent process.
src/cmd/ksh93/sh/main.c: sh_main():
- Prevent an infinite loop when '$_' is not passed in from the environment.
Solaris applies this bugfix to their version of ksh:
https://github.com/oracle/solaris-userland/blob/master/components/ksh93/patches/190-17432413.patch
[*]: https://www.mail-archive.com/ast-developers@lists.research.att.com/msg01680.html
When a command substitution is run on the same line as a here-document,
a syntax error occurs due to a regression introduced in ksh93u+ 2011-04-15:
true << EOF; true $(true)
EOF
syntax error at line 1: `<<EOF' here-document not contained within command substitution
The regression is caused by an error check that was added to make
the following script causes a syntax error (because the here-document
isn't completed inside of the command substitution):
$(true << EOF)
EOF
src/cmd/ksh93/sh/lex.c:
- Only throw an error when a here-document in a command substitution
isn't completed inside of the command substitution.
src/cmd/ksh93/tests/heredoc.sh:
- Add a regression test for running a command substitution on the
same line as a here-document.
- Add a missed regression test for using here-documents in command
substitutions. This is the original bug that was fixed in ksh93u+
2011-04-15 (it is why the error message was added), but a regression
test for here-documents in command substitutions wasn't added in
that version.
This bugfix was backported from ksh93v- 2013-10-10-alpha.
When ksh is compiled with SHOPT_SPAWN (the default), which uses
posix_spawn(3) or vfork(2) (via sh_ntfork()) to launch external
commands, at least two race conditions occur when launching
external commands while job control is active. See:
https://bugs.launchpad.net/ubuntu/+source/ksh/+bug/1887863/comments/3https://www.mail-archive.com/ast-developers@research.att.com/msg00717.html
The basic issue is that this performance optimisation is
incompatible with job control, because it uses a spawning mechanism
that doesn't copy the parent process' memory pages into the child
process, therefore no state that involves memory can be set before
exec-ing the external program. This makes it impossible to
correctly set the terminal's process group ID in the child process,
something that is essential for job control to work.
src/cmd/ksh93/sh/xec.c:
- Use sh_fork() instead of sh_ntfork() if job control is active.
This uses fork(2), which is 30%-ish slower on most sytems, but
allows for correctly setting the terminal process group.
src/cmd/ksh93/tests/basic.sh:
- Add regression test for the race condition reported in #79.
src/cmd/INIT/cc.darwin:
- Remove hardcoded flag to disable SHOPT_SPAWN on the Mac.
It should be safe to use now.
Fixes https://github.com/ksh93/ksh/issues/79
This code has always been completely undocumented since it was
added sometime between 2002 and 2004[*]. No one (including Google)
knows what it's for and no one is likely to find out.
Not only that, it doesn't compile. If SHOPT_AMP is defined, then it
errors out on an undefined function `print_fun` and an undefined
member `shpath` of 'struct Shell_s'. So it's clear that the code
had been abandoned by its authors for some time as of 2012.
src/cmd/ksh93/sh/xec.c:
- Remove vestigial SHOPT_AMP stuff, whatever that was.
[*] Found out by searching multishell ksh93 repo:
https://github.com/multishell/ksh93/
This merges some fixes to support building dtksh with -DBUILD_DTKSH.
These patches were sent through private email from the CDE developer
Chase. The reason these patches were submitted is because Chase wishes
to include ksh in CDE as an up-to-date git submodule. Quote from Chase:
"... my priority is to get your new version into our code as a git
submodule, and do it quickly before our code bases differ too widely."
Link to CDE project for anyone interested:
https://sourceforge.net/projects/cdesktopenv/
Although the patches were privately discussed, there are some public
emails on the CDE mailing list (links shortened due to long URLs):
ksh-chaos thread: https://bit.ly/3hjJ83b
dtksh alias thread: https://bit.ly/3hkzKfJ
The main fix is for suid_exec, which is now told that /usr/dt is a
valid directory to run from via preprocessor flags. A patch for
Shift-JIS was also submitted, but it isn't in this commit because it
isn't an effective fix for the existing Shift-JIS bugs. I will be
giving that patch some more testing.
From: Chase <nicetrynsa@protonmail.ch>
Co-authored by: Johnothan King <johnothanking@protonmail.com>
This applies ksh93-jobs.dif from OpenSUSE. Source:
https://build.opensuse.org/package/show/openSUSE:Leap:42.3:Update/ksh
src/cmd/ksh93/sh/jobs.c:
- jog_init(): Save errno in case close(JOBTTY) fails. If cause of
failure was interruption by a signal (EINTR), repeat close.
- job_kill(): Replace Red Hat fix for #35 with nicer OpenSUSE fix
that doesn't add a goto before declaring variables. Re: ff358f34
A file descriptor (at least 3, can't reproduce for 4 and up) opened
with 'exec' or 'redirect' in a virtual/non-forked subshell survived
that subshell after exiting it:
$ ksh -c '(redirect 3>&1); echo bug >&3'
bug
src/cmd/ksh93/sh/io.c:
- Apply a patch from OpenSUSE (ksh93-redirectleak.dif). Source:
https://build.opensuse.org/package/show/openSUSE:Leap:42.3:Update/ksh
src/cmd/ksh93/tests/io.sh:
- Add regression test.
Thanks to Marc Wilson for flagging this up.
ksh's built-in test, [ and [[ commands treat /dev/fd/* specially:
e.g. 'test /dev/fd/0' returns true even if it doesn't physically
exist, as on e.g. HP-UX. However, external commands need it to
exist physically.
src/cmd/ksh93/tests/subshell.sh:
- To decide whether to run a test with 'tee', use external 'test'
command to check if /dev/stdout and /dev/fd/1 actually exist.
'whence -a' is documented to list all possible interpretations of a
command, but failed to list a built-in command if a shell function
by the same name exists or is marked undefined using 'autoload'.
src/cmd/ksh93/bltins/whence.c: whence():
- Refactor and separate the code for reporting functions and
built-in commands so that both can be reported for one name.
src/cmd/ksh93/data/builtins.c: sh_optwhence[]:
- Correct 'whence --man' to document that:
* 'type' is equivalent to 'whence -v'
* '-a' output is like '-v'
src/cmd/ksh93/tests/builtins.sh:
- Test 'whence -a' with these combinations:
* a function, built-in and external command
* an undefined/autoload function, built-in and external command
Fixes https://github.com/ksh93/ksh/issues/83
$ ksh -c 'whence -a printf'
printf is a shell builtin
printf is /usr/bin/printf
printf is an undefined function
The third line should not appear.
src/cmd/ksh93/bltins/whence.c:
- Remove faulty extra check for undefined (= autoload) functions.
This was already handled earlier, on lines 192-193.
src/cmd/ksh93/tests/builtins.sh:
- Add regression test.
- For previous 'whence -a' test, don't bother with shell function.
Fixes https://github.com/ksh93/ksh/issues/26
Some regression tests have to be run with the -i option, making the
shell behave (mostly) as if it is interactive. This causes ksh to
print a final newline upon EOF (Ctrl+D). This is functional if the
shell is really interactive, i.e. if standard input is on a
terminal and we're not running a shell script: it ensures that a
parent shell's prompt appears on a new line. But for tests like
ksh -i -c 'testcommands'
or
ksh -i <<EOF
testcommands
EOF
it's a minor annoyance. Adding an explicit 'exit' is an effective
workaround, but we might as well fix it.
src/cmd/ksh93/sh/main.c: exfile(): done:
- If shell is "interactive", only print final newline if standard
input is on a terminal and we're not running a -c script.
This commit fixes two different crashes related to kshdb:
- When redirect is given an invalid file descriptor, a segfault
no longer occurs. Reproducer:
$ ksh -c 'redirect 9>&200000000000'
- Fix a crash due to free(3) being used on an invalid pointer.
This can be reproduced with kshdb (commands from att/ast#582):
$ git clone https://github.com/rocky/kshdb.git
$ cd kshdb
$ ksh autogen.sh
$ echo "print hi there" > $HOME/.kshdbrc
$ ./kshdb -L . test/example/dbg-test1.sh
src/cmd/ksh93/bltins/misc.c: b_dot_cmd():
- The string pointed to by shp->st.filename must be able to be
freed from memory with free(3), so duplicate the string with
strdup(3).
src/cmd/ksh93/sh/io.c: sh_redirect():
- Show an error message when a file descriptor is invalid to
fix a memory fault.
Commit 80d9ae2b removed the line that set the NV_EXPORT flag on an
alias when the obsolete ksh88 'alias -x' option was used. But it
turns out that flag actually did something: it caused 'whence -v'
to report the alias as an exported alias -- misleadingly, because
exported aliases have never actually exised in ksh93. Since '-x' no
longer sets that flag, that message is never printed.
src/cmd/ksh93/data/msg.c,
src/cmd/ksh93/include/path.h:
- Remove is_xalias[] = "%s is an exported alias for " message.
src/cmd/ksh93/bltins/whence.c:
- Remove dead code to check for (formerly) exported alias.
My tests with running shbench[*] on ksh binaries compiled by clang
and gcc yielded no performance difference between compiling with
'-O2' and '-Os'. So we might as well reduce ksh's size and memory
footprint by default.
[*] http://fossil.0branch.com/csb/https://github.com/ksh-community/shbench
src/cmd/INIT/make.probe:
- Change default gcc optimisation level from -O2 to -Os.
- Change default non-gcc optimisation level from -O to -Os.
The coshell(1) command, which is required for libcoshell to be
useful, is not known to be shipped by any distribution. It was
removed by the ksh-community fork and hence also by 93u+m (in
2940b3f5). The coshell facility as a whole is obsolete and
insecure. For a long time now, the statically linked libcoshell
library has been 40+ kilobytes of dead weight in the ksh binary.
Prior discussion (ksh2020): https://github.com/att/ast/issues/619
src/lib/libcoshell/*:
- Removed.
src/cmd/ksh93/*:
- Remove the SHOPT_COSHELL compiler option (which was enabled) and
a lot of code that was conditional upon #ifdef SHOPT_COSHELL.
- init.c: e_version[]: Removing SHOPT_COSHELL changed the "J"
feature identifier in ${.sh.version} to a lowercase "j", which
was conditional upon SHOPT_BGX (background job extensions).
But src/cmd/ksh93/RELEASE documents (at 08-12-04, on line 1188):
| +SHOPT_BGX enables background job extensions. Noted by "J" in
| the version string when enabled. [...]
That is the only available documentation. So change that "j" back
to a "J", leaving the version string unchanged after this commit.
- jobs.c: job_walk(): We need to keep one 'job_waitsafe(SIGCHLD);'
call that was conditional upon SHOPT_COSHELL; removing it caused
a regression test failure in tests/sigchld.sh, 'SIGCHLD blocked
for script at end of pipeline' (which means that until now, a ksh
compiled without libcoshell had broken SIGCHLD handling.)
bin/package, src/cmd/INIT/package.sh:
- Don't export COSHELL variable.
Support for the long-dead 3DFS userland versioning file system was
already removed from ksh93 (although I'd overlooked some minor
things), but libast still supported it. This removes that too.
src/lib/libast/include/fs3d.h,
src/lib/libast/man/fs3d.3,
src/lib/libast/misc/fs3d.c:
- Removed.
bin/package,
src/cmd/INIT/package.sh:
- Remove attempted use of removed vpath builtin.
src/cmd/ksh93/*:
- Remove minor 3dfs vestiges.
src/lib/lib{ast,cmd,coshell}/*:
- Remove code supporting 3dfs.
This commit backports the main changes to sh_delay from ksh93v-
and ksh2020, which fixes the following bugs:
- Microsecond amounts of less than one millisecond are no longer
ignored. The following loop will now take a minimum of one
second to complete:
for ((i = 0; i != 10000; i++)) do
sleep PT100U
done
- 'sleep 30' no longer adds an extra 30 milliseconds to the total
amount of time to sleep. This bug is hard to notice since 30
milliseconds can be considered within the margin of error. The
only reason why longer delays weren't affected is because the old
code masked the bug when the interval is greater than 30 seconds:
else if(n > 30)
{
sleep(n);
t -= n;
}
This caused 'sleep -s' to break with intervals greater than 30
seconds, so an actual fix is used instead of a workaround.
- 'sleep -s' now functions correctly with intervals of more than
30 seconds as the new code doesn't need the old workaround. This
is done by handling '-s' in sh_delay.
src/cmd/ksh93/bltins/sleep.c:
- Remove the replacement for sleep(3) from the sleep builtin.
- Replace the old sh_delay function with the newer one from ksh2020.
The new function uses tvsleep, which uses nanosleep(3) internally.
src/cmd/ksh93/include/shell.h,
src/cmd/ksh93/edit/edit.c,
src/cmd/ksh93/sh/jobs.c,
src/cmd/ksh93/sh/xec.c,
src/cmd/ksh93/shell.3:
- Update sh_delay documentation and usage since the function now
requires two arguments.
src/cmd/ksh93/tests/builtins.sh:
- Add a regression test for 'sleep -s' when the interval is greater
than 30 seconds. The other bugs can't be tested for in a feasible
manner across all systems:
https://github.com/ksh93/ksh/pull/72#issuecomment-657215616
With this change no more preset aliases exist, so the preset alias
tables can be safely removed. All ksh commands can now be used
without 'unalias -a' removing them, even in interactive shells.
Additionally, the history and r commands are no longer limited to
being used in interactive shells.
src/cmd/ksh93/bltins/hist.c:
- Implement the history and r commands as builtins. Also guarantee
lflag is set to one by avoiding 'lflag++'.
src/cmd/ksh93/Makefile,
src/cmd/ksh93/Mamfile,
src/cmd/ksh93/sh/main.c,
src/cmd/ksh93/sh/init.c,
src/cmd/ksh93/data/aliases.c:
- Remove the table of predefined aliases because the last few have
been removed. During init the alias tree is now initialized the
same way as the function tree.
src/cmd/ksh93/bltins/typeset.c:
- Remove the bugfix for unsetting predefined aliases because it is
now a no-op. Aliases are no longer able to have the NV_NOFREE
attribute.
src/cmd/ksh93/tests/alias.sh:
- Remove the regression test for unsetting predefined aliases since
those no longer exist.
src/cmd/ksh93/data/builtins.c:
- Update sh_opthist[] for 'hist --man', etc.
src/cmd/ksh93/sh.1:
- Remove the list of preset aliases since those no longer exist.
- Document history and r as builtins instead of preset aliases.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
These two default aliases are useful on interactive shells. In
scripts, they interfere with possible function or command names.
As of this commit, these final two default aliases are only loaded
for interactive shells, leaving zero default aliases for scripts.
This completes the project to get rid of misguided default aliases.
src/cmd/ksh93/include/shtable.h,
src/cmd/ksh93/data/aliases.c:
src/cmd/ksh93/sh/init.c:
- Add empty alias table shtab_noaliases[] for scripts.
- Rename inittree() to sh_inittree() and make it external.
- nv_init(), sh_reinit(): Initialise empty alias tree for scripts.
src/cmd/ksh93/sh/main.c: sh_main():
- If interactive, reinitialise alias tree for interactive shells.
src/cmd/ksh93/tests/alias.sh:
- To test default alias removal, launch shell with -i.
In a locale other than C/POSIX, ksh produces corrupted usage
messages for alternatives, e.g. this output of 'typeset -\?':
| Usage: typeset [-bflmnprstuxACHS] [-a[type]] [-i[base]] <..CUT..>
| [-T[tname]] [-Z[n]] [name[=value]...]
| Or:[name[=value]...]
| typeset[name[=value]...]
| [[name[=value]...]
| options[name[=value]...]
| ] -f [name...]
Correct output is:
| Usage: typeset [-bflmnprstuxACHS] [-a[type]] [-i[base]] <..CUT..>
| [-T[tname]] [-Z[n]] [name[=value]...]
| Or: typeset [ options ] -f [name...]
Similar corruption occurs in --help and --man output.
This bug is ancient: it's already in ksh 1993-12-28 s+.
ksh2020 has this fixed. A 'git bisect' run pinpointed the fix
to this commit, which fixes the ERROR_translating macro after
removing the AST-specific locale subsystem:
https://github.com/att/ast/commit/4abc061e
But making the same change in ksh 93u+m produced no results
(probably because we have not removed that subsystem).
However, disabling the use of translation macros in optget.sh
altogether (replacing them with dummies that were already coded in
a preprocessor directive fallback for a reduced standalone libast)
turns out to work. It's not as if there is actually any translation
anyway, so this effectively fixes this bug.
The actual cause of this bug remains mysterious, but should be
somewhere in the AST translation and/or locale subsystem.
src/lib/libast/misc/optget.c:
- Use fallback translation macros.
src/cmd/ksh93/tests/builtins.sh:
- Add regression tests for output of -?, --?x, --help and --man
for a usage string with an alternative ("Or:") usage message.
Before the fix, these failed when running the tests in the
C.UTF-8 locale (as in 'bin/shtests -u builtins').
A regression test failure was occurring on FreeBSD for
bin/shtests -u builtins
because UTF-8 characters were wrongly encoded as bytes in the
C.UTF-8 locale. The cause is that iswprint() always returns false
on FreeBSD if the ksh-specific C.UTF-8 locale is active, as the OS
doesn't support it.
That iswprint() call is redundant anyway; the new is_invisible()
function now handles this.
src/cmd/ksh93/sh/string.c: sh_fmtq():
- Remove redundant iswprint() test.
Many terminals (xterm being one example) give the Home and End keys
the escape sequences '^[[H' and '^[[F'. The first sequence is
handled in both editing modes by moving the cursor to start of
line, but ksh ignored the second sequence.
src/cmd/ksh93/edit/emacs.c,
src/cmd/ksh93/edit/vi.c:
- Add case labels for '^[[F' so that in both editing modes the End
key moves the cursor to the end of the line.
This converts the 'autoload', 'compound', 'float', 'functions',
'integer' and 'nameref' default aliases into regular built-in
commands, so that 'unalias -a' does not remove them. Shell
functions can now use these names, which improves compatibility
with POSIX shell scripts.
src/cmd/ksh93/data/aliases.c:
- Remove default typeset aliases.
src/cmd/ksh93/data/builtins.c,
src/cmd/ksh93/include/builtins.h:
- Add corresponding built-in command declarations. Typeset-style
commands are now defined by a pointer range, SYSTYPESET ..
SYSTYPESET_END. A couple need their own IDs (SYSCOMPOUND,
SYSNAMEREF) for special-casing in sh/xec.c.
- Update 'typeset --man'.
src/cmd/ksh93/bltins/typeset.c: b_typeset():
- Recognise the new builtin commands by argv[0]. Implement them by
inserting the corresponding 'typeset' options into the argument
list before parsing options. This may seem like a bit of a hack,
but it is simpler, shorter, more future-proof and less
error-prone than manually copying and adapting all the complex
flaggery from the option parsing loop.
src/cmd/ksh93/sh/parse.c,
src/cmd/ksh93/sh/xec.c:
- Recognise typeset-style commands by SYSTYPESET .. SYSTYPESET_END
pointer range.
- Special-case 'compound' (SYSCOMPOUND) and 'nameref' (SYSNAMEREF)
along with recognising the corresponding 'typeset' options.
src/cmd/ksh93/sh.1:
- Update to document the new built-ins.
- Since not all declaration commands are special built-ins now,
identify declaration commands using a double-dagger "\(dd"
character (which renders as '=' in ASCII) and disassociate their
definition from that of special built-ins.
src/cmd/ksh93/tests/variables.sh:
- Adapt a regression test as there is no more 'integer' alias.
Now that we have an iffe feature test for getrusage(3), introduced
in 70fc1da7, the millisecond-precision 'times' command from the
last version of ksh2020 can easily be backported.
src/cmd/ksh93/bltins/misc.c:
- Incorporate ksh2020 'times' command, with a couple of tweaks:
* Use locale's radix point instead of '.'.
* Pad seconds with initial zero if < 10.
src/cmd/ksh93/data/builtins.c:
- Update version date for 'times --man'.
src/cmd/ksh93/tests/builtins.sh:
- Update 'times' test for 3 digits after radix point.
The backported 'time' keyword code introduced a bug (shared by
ksh2020): the $TIMEFORMAT format sequences %0R, %0U and %0S output
a decimal fraction, acting as %1R, %1U and %1S.
A minor ksh2020 behaviour change that was also backported was that
the $TIMEFORMAT formatting no longer errored out on encountering an
invalid identifier, but continued. That behaviour is now reverted.
Neither of these two regressions occurred on older systems that
have to use times(3) instead of getrusage(2) or gettimeofday(2).
This commit also tweaks a regression test so that it doesn't fail
if the old times(3) interface is used.
src/cmd/ksh93/sh/xec.c: p_time():
- (Fix indentation of a for loop.)
- On modern systems, when outputting the result of $TIMEFORMAT
format sequences, only print fraction if precision is nonzero.
- On modern systems, when encountering an invalid format sequence,
abort formatting in the same way as done for old systems.
- On old systems, initialise 'n' in a more readable way when used
as the index for tm[].
src/cmd/ksh93/tests/basic.sh:
- Don't fail, but issue warning on old systems that use times(3).
Otherwise, check milliseconds: with the ksh 'sleep' builtin,
'TIMEFORMAT=%3R; time sleep .002' should always output '0.002'.
- Change regression test for TIMEFORMAT='%0S%' to check for the
correct output, '0%', instead of checking for an error message.
This commit backports the required fixes from ksh2020 for using
millisecond precision with the 'time' keyword. The bugfix refactors
a decent amount of code to rely on the BSD 'timeradd' and
'timersub' macros for calculating the total amount of time elapsed
(as these aren't standard, they are selectively implemented in an
iffe feature test for platforms without them). getrusage(3) is now
preferred since it usually has higher precision than times(3) (the
latter is used as a fallback).
There are three other fixes as well:
src/lib/libast/features/time:
- Test for getrusage with an iffe feature test rather than
assume _sys_times == _lib_getrusage.
src/cmd/ksh93/sh/xec.c:
- A single percent at the end of a format specifier is now
treated as a literal '%' (like in Bash).
- Zero-pad seconds if seconds < 10. This was already done for
the times builtin in commit 5c677a4c, although it wasn't
applied to the time keyword.
- Backport the ksh2020 bugfix for the time keyword by using
timeradd and timersub with gettimeofday (which is used with
a timeofday macro). Prefer getrusage when it is available.
- Allow compiling without the 'timeofday' ifdef for better
portability.
This is the order of priority for getting the elapsed time:
1) getrusage (most precise)
2) times + gettimeofday (best fallback)
3) only times (doesn't support millisecond precision)
This was tested by using debug '#undef' statements in xec.c.
src/cmd/ksh93/features/time:
- Implement feature tests for the 'timeradd' and 'timersub'
macros.
- Do a feature test for getrusage like in the libast time test.
src/cmd/ksh93/tests/basic.sh:
- Add test for millisecond precision.
- Add test for handling of '%' at the end of a format specifier.
- Add test for locale-specific radix point.
'set -b' had no effect; it should cause the shell to notify job
state changes immediately instead of waiting for the next prompt.
This fixes a regression that was introduced in ksh93t 2008-07-25.
The bugfix is from: https://github.com/att/ast/pull/1089
src/cmd/ksh93/sh/jobs.c:
- Save the tty wait state and avoid changing it if TTYWAIT was
already on to avoid breaking 'set -b'.
The last 'sh_offstate' is inside of an '#if' directive because it
is only required when ksh is compiled with SHOPT_COSHELL enabled.
src/cmd/ksh93/tests/pty.sh:
- Add a regression test for 'set -b' in interactive shells.
src/cmd/ksh93/tests/pty.sh:
- init: Remove superfluous lineno=$LINENO assignments. They aren't
needed if we avoid alias expansion on the err_exit function call.
- In the test "vi mode file name completion", append the main
shell's PID to /tmp/fakehome to make a slightly less insecure
temporary directory name. Unfortunately we cannot use $tmp as
that uses $TMPDIR which may cause a false pass. (re: 4cecde1d)
Apparently, on FreeBSD, the stty command does not work correctly
for setting 'erase' or 'kill' on a pty pseudoterminal. I've no
idea whether the bug is in FreeBSD stty or in AST pty, but in any
case, a workaround is needed for the time being.
src/cmd/ksh93/tests/pty.sh:
- Save terminal state on init; set a trap to restore it on exit.
- Issue 'stty erase ^H kill ^X' on the real terminal before
entering pty pseudoterminals.
Resolves#44.
For unknown reasons, the test for a memory leak in 'read -C stat
<<< "$data"' can show an intermittent minor variation in memory
usage when run with shcomp on certain versions of macOS.
The reported variations are 48 bytes or 80 bytes. This is too small
to be the result of an actual memory leak in the tested command;
it is repeated 500 times so that any real leak should show a
difference of at least 500 bytes.
src/cmd/ksh93/tests/leaks.sh:
- Add a tolerance of 128 bytes to get rid of the false failure.
Fixes#70 (hopefully).
This applies ksh-20100621-fdstatus.patch from Red Hat. Not very
much information is available, so this one is more or less taken
on faith. But it seems to make sense on the face of it: calling
sh_fcntl() instead of fcntl(2) directly makes the shell update its
internal file descriptor state more frequently.
It claims to fix Red Hat bug 924440. The report is currently closed
to the public: https://bugzilla.redhat.com/show_bug.cgi?id=924440
However, Kamil Dudka at Red Hat writes:
https://github.com/ksh93/ksh/issues/67#issuecomment-656379993
| Yes, the summary of RHBZ#924440 is "crash in bestreclaim() after
| traversing a memory block with a very large size". We did not have
| any in house reproducer for the bug. The mentioned patch was
| provided and verified by a customer.
...and Marc Wilson dug up a Red Hat erratum containing this info:
https://download.rhn.redhat.com/errata/RHBA-2013-1599.html
| Previously, the ksh shell did not resize the file descriptor list
| every time it was necessary. This could lead to memory corruption
| when several file descriptors were used. As a consequence, ksh
| terminated unexpectedly. This updated version resizes the file
| descriptor list every time it is needed, and ksh no longer
| crashes in the described scenario. (BZ#924440)
No reproducer means no regression test can be added now.
src/cmd/ksh93/sh/io.c,
src/cmd/ksh93/sh/subshell.c,
src/cmd/ksh93/sh/xec.c:
- Change several fcntl(2) calls to sh_fcntl(). This function calls
fcntl(2) and then updates the shell's file descriptor state.
Type names that start with a lowercase 'a' cause an error when used:
$ typeset -T al=(typeset bar)
$ al foo=(bar=testset)
/usr/bin/ksh: al: : invalid variable name
The error occurs because when the parser checks for the alias
builtin (to set 'assignment' to two instead of one), only the first
letter of 'argp->argval' is checked (rather than the entire
string). This was fixed in ksh93v- by comparing argp->argval
against "alias", but in ksh93u+m the check can simply be removed
because it is only run when a builtin has the BLT_DCL flag. As of
04b9171, the alias builtin does not have that flag.
src/cmd/ksh93/sh/parse.c:
- Remove the bugged check for the alias builtin.
src/cmd/ksh93/tests/types.sh:
- Add a regression test for type names starting with a lowercase 'a'.
