mirror of
https://github.com/albfan/miraclecast.git
synced 2025-02-15 04:42:06 +00:00
141 lines
4.7 KiB
Markdown
141 lines
4.7 KiB
Markdown
# MiracleCast - Wifi-Display/Miracast Implementation
|
|
|
|
The MiracleCast project provides software to connect external monitors to your system via Wi-Fi. It is compatible to the Wifi-Display specification also known as Miracast. MiracleCast implements the Display-Source as well as Display-Sink side.
|
|
|
|
The Display-Source side allows you to connect external displays to your system and stream local content to the device. A lot of effort is put into making this as easy as connecting external displays via HDMI.
|
|
|
|
On the other hand, the Display-Sink side allows you to create wifi-capable external displays yourself. You can use it on your embedded devices or even on full desktops to allow other systems to use your device as external display.
|
|
|
|
|
|
## Requirements
|
|
|
|
The MiracleCast projects requires the following software to be installed:
|
|
- **systemd**: A system management daemon. It is used for device-management (udev), dbus management (sd-bus) and service management.
|
|
Systemd must be compiled with --enable-kdbus, even though kdbus isn't used, but only the independent, experimental sd-libraries.
|
|
*required*: >=systemd-213
|
|
|
|
- **glib**: A utility library. Used by the current DHCP implementation. Will be removed once sd-dns gains DHCP-server capabilities.
|
|
*required*: ~=glib2-2.38 (might work with older releases, untested..)
|
|
|
|
- **check**: Test-suite for C programs. Used for optional tests of the MiracleCast code base.
|
|
*optional*: ~=check-0.9.11 (might work with older releases, untested..)
|
|
|
|
- **gstreamer**: MiracleCast relay on gstreamer to show cast its output. You can test if all needed is installed launching [res/test-viewer.sh](https://github.com/albfan/miraclecast/blob/master/res/test-viewer.sh)
|
|
|
|
- **P2P Wi-Fi device** Although widespread this days, there are some devices not compatible with [Wi-Fi Direct](http://en.wikipedia.org/wiki/Wi-Fi_Direct) (prior know as Wi-Fi P2P). Test yours with [res/test-wifi-capabilities.sh](https://github.com/albfan/miraclecast/blob/master/res/test-wifi-capabilities.sh)
|
|
|
|
- copy the dbus policy **res/org.freedesktop.miracle.conf** to `/etc/dbus-1/system.d/`
|
|
|
|
## Install
|
|
|
|
To compile MiracleCast, you can choose from [autotools](http://en.wikipedia.org/wiki/GNU_build_system) or [cmake](http://en.wikipedia.org/wiki/CMake):
|
|
|
|
|
|
Autotools:
|
|
|
|
$ ./autogen.sh
|
|
$ mkdir build
|
|
$ cd build
|
|
$ ../configure --prefix=/usr/local #avoid --prefix for a standard install
|
|
|
|
Cmake:
|
|
|
|
$ mkdir build
|
|
$ cd build
|
|
$ cmake ..
|
|
|
|
Compile
|
|
|
|
$ make
|
|
|
|
Test
|
|
|
|
$ make check #only with autotools by now
|
|
|
|
Install
|
|
|
|
$ sudo make install
|
|
|
|
### Ubuntu
|
|
|
|
This specific linux flavour is so hard to get miraclecast dependencies that an alternative repo was created to install systemd with dbus
|
|
|
|
https://github.com/albfan/systemd-ubuntu-with-dbus
|
|
|
|
> See specific instructions on that repo
|
|
|
|
### Arch linux
|
|
|
|
Use existing [AUR package](https://aur.archlinux.org/packages/miraclecast-github/). Remember to enable kdus to systemd-git dependency
|
|
|
|
$ export _systemd_git_kdbus=--enable-kdbus
|
|
|
|
You can achieve installation using [yaourt](https://wiki.archlinux.org/index.php/Yaourt)
|
|
|
|
## Documentation
|
|
|
|
Steps to use it as sink:
|
|
|
|
1. shutdown wpa_supplicant
|
|
|
|
$ sudo kill -9 $(ps -ef | grep wpa_supplican[t] | awk '{print $2}')
|
|
# now you can use `res/kill-wpa.sh`
|
|
|
|
>Remember to save your config to use with `res/normal-wifi.sh`
|
|
>it will be easily located with `ps -ef | grep wpa_supplicant` on `-c` option.
|
|
|
|
2. launch wifi daemon
|
|
|
|
$ sudo miracle-wifid &
|
|
|
|
3. launch sink control (your network card will be detected. here 3)
|
|
|
|
$ sudo miracle-sinkctl
|
|
[ADD] Link: 3
|
|
|
|
4. run WiFi Display on link:
|
|
|
|
> run 3
|
|
|
|
5. Pair your machine with other miracast device (mirroring)
|
|
|
|
6. See your screen device on this machine
|
|
|
|
Steps to use it as peer:
|
|
|
|
1. Repeat steps 1 and 2 from "use as sink"
|
|
|
|
2. launch wifi control
|
|
|
|
$ sudo miracle-wifictl
|
|
|
|
3. Enable visibility for other devices
|
|
|
|
4. Locate them using scanning
|
|
|
|
> psp-scan
|
|
|
|
5. Apart from list, or show info with peer <mac> there's nothing useful here by now.
|
|
|
|
## Autocompletion
|
|
|
|
Source [res/miraclecast-completion](https://github.com/albfan/miraclecast/blob/master/res/miraclecast-completion) for autocompletion
|
|
|
|
## License
|
|
|
|
This software is licensed under the terms of the GNU-LGPL license. Please see ./COPYING for further information.
|
|
|
|
## Credits
|
|
|
|
This software is originally maintained by: David Herrmann dh.herrmann@gmail.com
|
|
|
|
This fork is maintained by: Alberto Fanjul albertofanjul@gmail.com
|
|
|
|
If you have any questions, do not hesitate to contact one of the maintainers.
|
|
|
|
## Additional urls
|
|
|
|
- Website: http://www.freedesktop.org/wiki/Software/miracle
|
|
- Original repo: git://people.freedesktop.org/~dvdhrm/miracle
|
|
- Fork repo: https://github.com/albfan/miraclecast
|
|
|