mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
fix 806x
This commit is contained in:
parent
47f2dca1ab
commit
788b4dbd8c
99 changed files with 13809 additions and 520 deletions
26
root/target/linux/ipq806x/Makefile
Executable file
26
root/target/linux/ipq806x/Makefile
Executable file
|
@ -0,0 +1,26 @@
|
|||
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
ARCH:=arm
|
||||
BOARD:=ipq806x
|
||||
BOARDNAME:=Qualcomm Atheros IPQ806X
|
||||
FEATURES:=squashfs nand fpu ramdisk
|
||||
CPU_TYPE:=cortex-a15
|
||||
CPU_SUBTYPE:=neon-vfpv4
|
||||
SUBTARGETS:=generic
|
||||
|
||||
KERNEL_PATCHVER:=5.10
|
||||
|
||||
KERNELNAME:=zImage Image dtbs
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
DEFAULT_PACKAGES += \
|
||||
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
|
||||
kmod-ata-ahci kmod-ata-ahci-platform \
|
||||
kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
||||
kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \
|
||||
kmod-ath10k-ct wpad-basic-wolfssl \
|
||||
uboot-envtools
|
||||
|
||||
$(eval $(call BuildTarget))
|
75
root/target/linux/ipq806x/base-files/etc/board.d/01_leds
Executable file
75
root/target/linux/ipq806x/base-files/etc/board.d/01_leds
Executable file
|
@ -0,0 +1,75 @@
|
|||
#
|
||||
# Copyright (C) 2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
buffalo,wxr-2533dhp)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt"
|
||||
ucidef_set_led_switch "wan" "WAN" "white:internet" "switch0" "0x20"
|
||||
;;
|
||||
compex,wpq864)
|
||||
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "pcie-usb" "PCIe USB" "green:usb-pcie" "usb3-port1"
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
||||
;;
|
||||
meraki,mr52)
|
||||
ucidef_set_led_netdev "eth0" "eth0" "green:lan1" "eth0"
|
||||
ucidef_set_led_netdev "eth1" "eth1" "green:lan2" "eth1"
|
||||
;;
|
||||
nec,wg2600hp)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
||||
ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
|
||||
;;
|
||||
nec,wg2600hp3)
|
||||
ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
|
||||
;;
|
||||
netgear,d7800 |\
|
||||
netgear,r7500 |\
|
||||
netgear,r7500v2 |\
|
||||
netgear,r7800 |\
|
||||
netgear,xr500)
|
||||
ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"
|
||||
ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
|
||||
ucidef_set_led_ide "esata" "eSATA" "white:esata"
|
||||
;;
|
||||
tplink,ad7200)
|
||||
ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1"
|
||||
ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
|
||||
ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
|
||||
ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
|
||||
ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
|
||||
;;
|
||||
tplink,c2600)
|
||||
ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
|
||||
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
|
||||
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
|
||||
;;
|
||||
tplink,vr2600v)
|
||||
ucidef_set_led_usbport "usb" "USB" "white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
|
||||
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "white:wlan2g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "white:wlan5g" "phy1tpt"
|
||||
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
ucidef_set_led_netdev "wan" "WAN" "white:internet" "eth1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
94
root/target/linux/ipq806x/base-files/etc/board.d/02_network
Executable file
94
root/target/linux/ipq806x/base-files/etc/board.d/02_network
Executable file
|
@ -0,0 +1,94 @@
|
|||
#
|
||||
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
||||
# Copyright (c) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
askey,rt4230w-rev6 |\
|
||||
asrock,g10 |\
|
||||
nec,wg2600hp)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
|
||||
;;
|
||||
buffalo,wxr-2533dhp |\
|
||||
compex,wpq864 |\
|
||||
netgear,d7800 |\
|
||||
netgear,r7500 |\
|
||||
netgear,r7500v2 |\
|
||||
qcom,ipq8064-ap148 |\
|
||||
tplink,vr2600v)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
linksys,ea7500-v1)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
|
||||
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
||||
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
||||
;;
|
||||
linksys,ea8500)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
|
||||
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
||||
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
||||
;;
|
||||
meraki,mr42)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
meraki,mr52)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
;;
|
||||
nec,wg2600hp3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
|
||||
;;
|
||||
netgear,r7800 |\
|
||||
netgear,xr500 |\
|
||||
tplink,c2600)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
|
||||
;;
|
||||
qcom,ipq8064-ap161)
|
||||
ucidef_set_interface_lan "eth1 eth2"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
|
||||
;;
|
||||
qcom,ipq8064-db149)
|
||||
ucidef_set_interface_lan "eth1 eth2 eth3"
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
|
||||
;;
|
||||
tplink,ad7200)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
|
||||
;;
|
||||
ubnt,unifi-ac-hd)
|
||||
ucidef_set_interface_lan "eth0 eth1"
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
|
||||
ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
|
||||
ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
|
||||
;;
|
||||
*)
|
||||
echo "Unsupported hardware. Network interfaces not intialized"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
122
root/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
Executable file
122
root/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
Executable file
|
@ -0,0 +1,122 @@
|
|||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:01:00.0.bin")
|
||||
case "$board" in
|
||||
meraki,mr52)
|
||||
CI_UBIPART=art
|
||||
caldata_extract_ubi "ART" 0x1000 0x844
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-pci-0000:01:00.0.bin")
|
||||
case $board in
|
||||
askey,rt4230w-rev6)
|
||||
caldata_extract "0:ART" 0x1000 0x2f20
|
||||
;;
|
||||
asrock,g10)
|
||||
caldata_extract "0:art" 0x1000 0x2f20
|
||||
;;
|
||||
buffalo,wxr-2533dhp |\
|
||||
nec,wg2600hp |\
|
||||
nec,wg2600hp3 |\
|
||||
tplink,vr2600v)
|
||||
caldata_extract "ART" 0x1000 0x2f20
|
||||
;;
|
||||
linksys,ea7500-v1 |\
|
||||
linksys,ea8500)
|
||||
caldata_extract "art" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) 1)
|
||||
;;
|
||||
meraki,mr42)
|
||||
CI_UBIPART=art
|
||||
caldata_extract_ubi "ART" 0x1000 0x2f20
|
||||
;;
|
||||
netgear,d7800 |\
|
||||
netgear,r7500v2 |\
|
||||
netgear,r7800 |\
|
||||
netgear,xr500)
|
||||
caldata_extract "art" 0x1000 0x2f20
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
caldata_extract "radio" 0x1000 0x2f20
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
caldata_extract "0:art" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:appsblenv ethaddr) 1)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-pci-0001:01:00.0.bin")
|
||||
case $board in
|
||||
askey,rt4230w-rev6)
|
||||
caldata_extract "0:ART" 0x5000 0x2f20
|
||||
;;
|
||||
asrock,g10)
|
||||
caldata_extract "0:art" 0x5000 0x2f20
|
||||
;;
|
||||
buffalo,wxr-2533dhp |\
|
||||
nec,wg2600hp |\
|
||||
nec,wg2600hp3 |\
|
||||
tplink,vr2600v)
|
||||
caldata_extract "ART" 0x5000 0x2f20
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
caldata_extract "0:art" 0x1000 0x2f20
|
||||
;;
|
||||
linksys,ea7500-v1 |\
|
||||
linksys,ea8500)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) 2)
|
||||
;;
|
||||
meraki,mr42 |\
|
||||
meraki,mr52)
|
||||
CI_UBIPART=art
|
||||
caldata_extract_ubi "ART" 0x5000 0x2f20
|
||||
;;
|
||||
netgear,d7800 |\
|
||||
netgear,r7500v2 |\
|
||||
netgear,r7800 |\
|
||||
netgear,xr500)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
caldata_extract "radio" 0x5000 0x2f20
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
caldata_extract "0:art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii 0:appsblenv ethaddr)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/cal-pci-0002:01:00.0.bin")
|
||||
case "$board" in
|
||||
meraki,mr42)
|
||||
CI_UBIPART=art
|
||||
caldata_extract_ubi "ART" 0x9000 0x844
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-pci-0002:01:00.0.bin")
|
||||
case $board in
|
||||
edgecore,ecw5410)
|
||||
caldata_extract "0:art" 0x5000 0x2f20
|
||||
;;
|
||||
meraki,mr52)
|
||||
CI_UBIPART=art
|
||||
caldata_extract_ubi "ART" 0x9000 0x2f20
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
exit 1
|
||||
;;
|
||||
esac
|
39
root/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
Executable file
39
root/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
Executable file
|
@ -0,0 +1,39 @@
|
|||
#!/bin/ash
|
||||
|
||||
[ "$ACTION" == "add" ] || exit 0
|
||||
|
||||
PHYNBR=${DEVPATH##*/phy}
|
||||
|
||||
[ -n $PHYNBR ] || exit 0
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
ubnt,unifi-ac-hd)
|
||||
macaddr_add $(mtd_get_mac_binary EEPROM 0x6) $(($PHYNBR + 1)) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
esac
|
||||
|
||||
OPATH=${DEVPATH##/devices/platform/}
|
||||
OPATH=${OPATH%%/ieee*}
|
||||
|
||||
# 10 radios is enough for anyone!
|
||||
for i in $(seq 0 9);
|
||||
do
|
||||
BUS=$(uci get wireless.@wifi-device[$i].path)
|
||||
if [ "$BUS " == "$OPATH " ]
|
||||
then
|
||||
PHYNAME=${DEVPATH##*ieee80211/}
|
||||
NPHYNAME=$(uci get wireless.@wifi-device[$i].phyname)
|
||||
if [ "$NPHYNAME " != " " ]
|
||||
then
|
||||
if [ "$PHYNAME " != "$NPHYNAME " ]
|
||||
then
|
||||
iw $PHYNAME set name $NPHYNAME
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
done
|
20
root/target/linux/ipq806x/base-files/etc/init.d/bootcount
Executable file
20
root/target/linux/ipq806x/base-files/etc/init.d/bootcount
Executable file
|
@ -0,0 +1,20 @@
|
|||
#!/bin/sh /etc/rc.common
|
||||
|
||||
START=99
|
||||
|
||||
. "$IPKG_INSTROOT/lib/upgrade/asrock.sh"
|
||||
|
||||
boot() {
|
||||
case $(board_name) in
|
||||
asrock,g10)
|
||||
asrock_bootconfig_mangle "bootcheck" && reboot
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
fw_setenv bootcount 0
|
||||
;;
|
||||
linksys,ea7500-v1 |\
|
||||
linksys,ea8500)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
esac
|
||||
}
|
17
root/target/linux/ipq806x/base-files/etc/init.d/cpufreq
Executable file
17
root/target/linux/ipq806x/base-files/etc/init.d/cpufreq
Executable file
|
@ -0,0 +1,17 @@
|
|||
#!/bin/sh /etc/rc.common
|
||||
|
||||
START=15
|
||||
|
||||
boot() {
|
||||
local governor
|
||||
|
||||
governor=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_governor)
|
||||
|
||||
if [ "$governor" = "ondemand" ]; then
|
||||
# Effective only with ondemand
|
||||
echo 600000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
|
||||
echo 600000 > /sys/devices/system/cpu/cpufreq/policy1/scaling_min_freq
|
||||
echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
|
||||
echo 50 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
|
||||
fi
|
||||
}
|
4
root/target/linux/ipq806x/base-files/etc/inittab
Executable file
4
root/target/linux/ipq806x/base-files/etc/inittab
Executable file
|
@ -0,0 +1,4 @@
|
|||
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
|
||||
::sysinit:/etc/init.d/rcS S boot
|
||||
::shutdown:/etc/init.d/rcS K shutdown
|
||||
ttyMSM0::askfirst:/usr/libexec/login.sh
|
7
root/target/linux/ipq806x/base-files/etc/uci-defaults/04_led_migration
Executable file
7
root/target/linux/ipq806x/base-files/etc/uci-defaults/04_led_migration
Executable file
|
@ -0,0 +1,7 @@
|
|||
. /lib/functions/migrations.sh
|
||||
|
||||
remove_devicename_leds
|
||||
|
||||
migrations_apply system
|
||||
|
||||
exit 0
|
13
root/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth
Executable file
13
root/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth
Executable file
|
@ -0,0 +1,13 @@
|
|||
. /lib/functions.sh
|
||||
|
||||
preinit_reorder_eth() {
|
||||
case $(board_name) in
|
||||
ubnt,unifi-ac-hd)
|
||||
ip link set eth0 name ethtmp
|
||||
ip link set eth1 name eth0
|
||||
ip link set ethtmp name eth1
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_main preinit_reorder_eth
|
14
root/target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh
Executable file
14
root/target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh
Executable file
|
@ -0,0 +1,14 @@
|
|||
. /lib/functions.sh
|
||||
|
||||
preinit_set_mac_address() {
|
||||
case $(board_name) in
|
||||
asrock,g10)
|
||||
lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
|
||||
wan_mac=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
|
||||
ip link set dev eth0 address "${lan_mac}"
|
||||
ip link set dev eth1 address "${wan_mac}"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_main preinit_set_mac_address
|
54
root/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh
Executable file
54
root/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh
Executable file
|
@ -0,0 +1,54 @@
|
|||
. /lib/functions.sh
|
||||
|
||||
asrock_bootconfig_mangle() {
|
||||
local mtdnum="$(find_mtd_index 0:bootconfig)"
|
||||
|
||||
if [ -z "$mtdnum" ]; then
|
||||
echo "cannot find bootconfig mtd partition"
|
||||
return 1
|
||||
fi
|
||||
dd if=/dev/mtd$mtdnum of=/tmp/mtd$mtdnum bs=1k
|
||||
|
||||
local partition_byte="$(dd if=/tmp/mtd$mtdnum bs=1 skip=52 count=1)"
|
||||
local upgrade_byte="$(dd if=/tmp/mtd$mtdnum bs=1 skip=4 count=1)"
|
||||
|
||||
if [ $1 = "bootcheck" ]; then
|
||||
if [ ! -s $upgrade_byte ]; then
|
||||
dd if=/dev/mtd$mtdnum of=/tmp/mtd$mtdnum bs=1k
|
||||
printf '\x00' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=4
|
||||
printf '\x00' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=56
|
||||
else
|
||||
return 1
|
||||
fi
|
||||
elif [ $1 = "sysupgrade" ]; then
|
||||
printf '\x01' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=4
|
||||
printf '\x01' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=56
|
||||
fi
|
||||
|
||||
if [ -s $partition_byte ]; then
|
||||
printf '\x01' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=52
|
||||
else
|
||||
printf '\x00' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=52
|
||||
fi
|
||||
|
||||
mtd write /tmp/mtd$mtdnum /dev/mtd$mtdnum
|
||||
return 0
|
||||
}
|
||||
|
||||
asrock_upgrade_prepare() {
|
||||
local ubidev="$( nand_find_ubi ubi )"
|
||||
|
||||
#Set upgrade flag. If something goes wrong, router will boot with
|
||||
#factory firmware.
|
||||
asrock_bootconfig_mangle 'sysupgrade'
|
||||
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "cannot find bootconfig mtd partition"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Just delete these partitions if present and use
|
||||
# OpenWrt's standard names for those.
|
||||
ubirmvol /dev/$ubidev -N ubi_rootfs &> /dev/null || true
|
||||
ubirmvol /dev/$ubidev -N ubi_rootfs_data &> /dev/null || true
|
||||
}
|
44
root/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh
Executable file
44
root/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh
Executable file
|
@ -0,0 +1,44 @@
|
|||
# Copyright (C) 2018 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions.sh
|
||||
|
||||
# The mtd partition 'ubi' and 'rootfs_1' on NAND flash are os-image
|
||||
# partitions. These partitions are called as "Bank1/Bank2" in U-Boot
|
||||
# on WXR-2533DHP, and they are checked conditions when booting.
|
||||
# Then, U-Boot checks kernel and rootfs volumes in ubi, but U-Boot
|
||||
# needs "ubi_rootfs" as rootfs volume name. And, U-Boot checks the
|
||||
# checksum at the end of rootfs (ubi_rootfs).
|
||||
# When U-Boot writes os-image into the Bank, only kernel, rootfs
|
||||
# (ubi_rootfs) and rootfs_data (ubi_rootfs_data) volumes are wrote
|
||||
# into the Bank. (not full ubi image)
|
||||
#
|
||||
# == U-Boot Behaviors ==
|
||||
# - Bank1/Bank2 images are good, images are different
|
||||
# -> writes os-image to Bank1 from Bank2
|
||||
# (this behavior is used to firmware upgrade in stock firmware)
|
||||
# - Bank1 image is broken (or checksum error)
|
||||
# -> writes os-image to Bank1 from Bank2
|
||||
# - Bank2 image is broken (or checksum error)
|
||||
# -> writes os-image to Bank2 from Bank1
|
||||
# - Bank1/Bank2 images are broken (or checksum error)
|
||||
# -> start tftp
|
||||
|
||||
buffalo_upgrade_prepare_ubi() {
|
||||
local ubidev="$( nand_find_ubi ubi )"
|
||||
local mtdnum2="$( find_mtd_index rootfs_1 )"
|
||||
|
||||
if [ ! "$mtdnum2" ]; then
|
||||
echo "cannot find second ubi mtd partition rootfs_1"
|
||||
return 1
|
||||
fi
|
||||
|
||||
local ubidev2="$( nand_find_ubi rootfs_1 )"
|
||||
if [ ! "$ubidev2" ] && [ -n "$mtdnum2" ]; then
|
||||
ubiattach -m "$mtdnum2"
|
||||
ubidev2="$( nand_find_ubi rootfs_1 )"
|
||||
fi
|
||||
|
||||
ubirmvol /dev/$ubidev -N ubi_rootfs_data &> /dev/null || true
|
||||
ubirmvol /dev/$ubidev2 -N kernel &> /dev/null || true
|
||||
}
|
102
root/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh
Executable file
102
root/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh
Executable file
|
@ -0,0 +1,102 @@
|
|||
#
|
||||
# Copyright (C) 2014-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
linksys_get_target_firmware() {
|
||||
|
||||
local cur_boot_part mtd_ubi0
|
||||
|
||||
cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
|
||||
if [ -z "${cur_boot_part}" ] ; then
|
||||
mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
|
||||
case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
|
||||
kernel1|rootfs1)
|
||||
cur_boot_part=1
|
||||
;;
|
||||
kernel2|rootfs2)
|
||||
cur_boot_part=2
|
||||
;;
|
||||
esac
|
||||
>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
|
||||
"${cur_boot_part}" "${mtd_ubi0}"
|
||||
fi
|
||||
|
||||
case $cur_boot_part in
|
||||
1)
|
||||
fw_setenv -s - <<-EOF
|
||||
boot_part 2
|
||||
auto_recovery yes
|
||||
EOF
|
||||
printf "kernel2"
|
||||
return
|
||||
;;
|
||||
2)
|
||||
fw_setenv -s - <<-EOF
|
||||
boot_part 1
|
||||
auto_recovery yes
|
||||
EOF
|
||||
printf "kernel1"
|
||||
return
|
||||
;;
|
||||
*)
|
||||
return
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
platform_do_upgrade_linksys() {
|
||||
local magic_long="$(get_magic_long "$1")"
|
||||
|
||||
mkdir -p /var/lock
|
||||
local part_label="$(linksys_get_target_firmware)"
|
||||
touch /var/lock/fw_printenv.lock
|
||||
|
||||
if [ ! -n "$part_label" ]
|
||||
then
|
||||
echo "cannot find target partition"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
local target_mtd=$(find_mtd_part $part_label)
|
||||
|
||||
[ "$magic_long" = "73797375" ] && {
|
||||
CI_KERNPART="$part_label"
|
||||
if [ "$part_label" = "kernel1" ]
|
||||
then
|
||||
CI_UBIPART="rootfs1"
|
||||
else
|
||||
CI_UBIPART="rootfs2"
|
||||
fi
|
||||
|
||||
|
||||
# remove "squashfs" vol (in case we are flashing over a stock image, which is also UBI)
|
||||
|
||||
local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
|
||||
if [ ! "$mtdnum" ]; then
|
||||
echo "cannot find ubi mtd partition $CI_UBIPART"
|
||||
return 1
|
||||
fi
|
||||
|
||||
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
|
||||
if [ ! "$ubidev" ]; then
|
||||
ubiattach -m "$mtdnum"
|
||||
sync
|
||||
ubidev="$( nand_find_ubi "$CI_UBIPART" )"
|
||||
fi
|
||||
|
||||
if [ "$ubidev" ]; then
|
||||
|
||||
local squash_ubivol="$( nand_find_volume $ubidev squashfs )"
|
||||
|
||||
# kill volume
|
||||
[ "$squash_ubivol" ] && ubirmvol /dev/$ubidev -N squashfs || true
|
||||
fi
|
||||
|
||||
|
||||
# complete std upgrade
|
||||
nand_upgrade_tar "$1"
|
||||
}
|
||||
[ "$magic_long" = "27051956" ] && {
|
||||
get_image "$1" | mtd write - $part_label
|
||||
}
|
||||
}
|
71
root/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
Executable file
71
root/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
Executable file
|
@ -0,0 +1,71 @@
|
|||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
platform_check_image() {
|
||||
return 0;
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
askey,rt4230w-rev6 |\
|
||||
compex,wpq864|\
|
||||
netgear,d7800 |\
|
||||
netgear,r7500 |\
|
||||
netgear,r7500v2 |\
|
||||
netgear,r7800 |\
|
||||
netgear,xr500 |\
|
||||
qcom,ipq8064-ap148 |\
|
||||
qcom,ipq8064-ap161)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
asrock,g10)
|
||||
asrock_upgrade_prepare
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
buffalo,wxr-2533dhp)
|
||||
buffalo_upgrade_prepare_ubi
|
||||
CI_ROOTPART="ubi_rootfs"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
||||
if [ "$part" = "rootfs1" ]; then
|
||||
fw_setenv active 2 || exit 1
|
||||
CI_UBIPART="rootfs2"
|
||||
else
|
||||
fw_setenv active 1 || exit 1
|
||||
CI_UBIPART="rootfs1"
|
||||
fi
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
linksys,ea7500-v1 |\
|
||||
linksys,ea8500)
|
||||
platform_do_upgrade_linksys "$1"
|
||||
;;
|
||||
meraki,mr42 |\
|
||||
meraki,mr52)
|
||||
CI_KERNPART="bootkernel2"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
PART_NAME="os-image:rootfs"
|
||||
MTD_CONFIG_ARGS="-s 0x200000"
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
tplink,vr2600v)
|
||||
PART_NAME="kernel:rootfs"
|
||||
MTD_CONFIG_ARGS="-s 0x200000"
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
zyxel_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
124
root/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
Executable file
124
root/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
Executable file
|
@ -0,0 +1,124 @@
|
|||
#
|
||||
# Copyright (C) 2016 lede-project.org
|
||||
#
|
||||
|
||||
zyxel_get_rootfs() {
|
||||
local rootfsdev
|
||||
|
||||
if read cmdline < /proc/cmdline; then
|
||||
case "$cmdline" in
|
||||
*root=*)
|
||||
rootfsdev="${cmdline##*root=}"
|
||||
rootfsdev="${rootfsdev%% *}"
|
||||
;;
|
||||
esac
|
||||
|
||||
echo "${rootfsdev}"
|
||||
fi
|
||||
}
|
||||
|
||||
zyxel_do_flash() {
|
||||
local tar_file=$1
|
||||
local kernel=$2
|
||||
local rootfs=$3
|
||||
local dualflagmtd=$4
|
||||
|
||||
# keep sure its unbound
|
||||
losetup --detach-all || {
|
||||
echo Failed to detach all loop devices. Skip this try.
|
||||
reboot -f
|
||||
}
|
||||
|
||||
# use the first found directory in the tar archive
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
echo "flashing kernel to $kernel"
|
||||
tar xf $tar_file ${board_dir}/kernel -O >$kernel
|
||||
|
||||
echo "flashing rootfs to ${rootfs}"
|
||||
tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
|
||||
|
||||
# a padded rootfs is needed for overlay fs creation
|
||||
local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
|
||||
[ $offset -lt 65536 ] && {
|
||||
echo Wrong size for rootfs: $offset
|
||||
sleep 10
|
||||
reboot -f
|
||||
}
|
||||
|
||||
# Mount loop for rootfs_data
|
||||
local loopdev="$(losetup -f)"
|
||||
losetup -o $offset $loopdev $rootfs || {
|
||||
echo "Failed to mount looped rootfs_data."
|
||||
sleep 10
|
||||
reboot -f
|
||||
}
|
||||
|
||||
echo "Format new rootfs_data at position ${offset}."
|
||||
mkfs.ext4 -F -L rootfs_data $loopdev
|
||||
mkdir /tmp/new_root
|
||||
mount -t ext4 $loopdev /tmp/new_root && {
|
||||
echo "Saving config to rootfs_data at position ${offset}."
|
||||
cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
|
||||
umount /tmp/new_root
|
||||
}
|
||||
|
||||
# flashing successful, toggle the dualflag
|
||||
case "$rootfs" in
|
||||
"/dev/mmcblk0p5")
|
||||
printf "\xff" >$dualflagmtd
|
||||
;;
|
||||
"/dev/mmcblk0p8")
|
||||
printf "\x01" >$dualflagmtd
|
||||
;;
|
||||
esac
|
||||
|
||||
# Cleanup
|
||||
losetup -d $loopdev >/dev/null 2>&1
|
||||
sync
|
||||
umount -a
|
||||
reboot -f
|
||||
}
|
||||
|
||||
zyxel_do_upgrade() {
|
||||
local tar_file="$1"
|
||||
local board=$(board_name)
|
||||
local rootfs="$(zyxel_get_rootfs)"
|
||||
local kernel=
|
||||
|
||||
[ -b "${rootfs}" ] || return 1
|
||||
case "$board" in
|
||||
zyxel,nbg6817)
|
||||
local dualflagmtd="$(find_mtd_part 0:dual_flag)"
|
||||
[ -b $dualflagmtd ] || return 1
|
||||
|
||||
case "$rootfs" in
|
||||
"/dev/mmcblk0p5")
|
||||
# booted from the primary partition set
|
||||
# write to the alternative set
|
||||
kernel="/dev/mmcblk0p7"
|
||||
rootfs="/dev/mmcblk0p8"
|
||||
;;
|
||||
"/dev/mmcblk0p8")
|
||||
# booted from the alternative partition set
|
||||
# write to the primary set
|
||||
kernel="/dev/mmcblk0p4"
|
||||
rootfs="/dev/mmcblk0p5"
|
||||
;;
|
||||
*)
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
|
||||
zyxel_do_flash $tar_file $kernel $rootfs $dualflagmtd
|
||||
|
||||
nand_do_upgrade "$1"
|
||||
|
||||
return 0
|
||||
}
|
15
root/target/linux/ipq806x/base-files/sbin/asrock_g10_back_to_factory
Executable file
15
root/target/linux/ipq806x/base-files/sbin/asrock_g10_back_to_factory
Executable file
|
@ -0,0 +1,15 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/upgrade/asrock.sh
|
||||
|
||||
case $(board_name) in
|
||||
asrock,g10)
|
||||
asrock_bootconfig_mangle "factory"
|
||||
if [ $? -eq 0 ]; then
|
||||
reboot
|
||||
fi
|
||||
;;
|
||||
*)
|
||||
echo "Unsupported hardware."
|
||||
;;
|
||||
esac
|
|
@ -99,24 +99,17 @@ CONFIG_CRC16=y
|
|||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRYPTO_ACOMP2=y
|
||||
CONFIG_CRYPTO_AEAD=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DEV_QCOM_RNG=y
|
||||
CONFIG_CRYPTO_DRBG=y
|
||||
CONFIG_CRYPTO_DRBG_HMAC=y
|
||||
CONFIG_CRYPTO_DRBG_MENU=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_HMAC=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_JITTERENTROPY=y
|
||||
CONFIG_CRYPTO_LIB_SHA256=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_NULL2=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
|
@ -144,6 +137,7 @@ CONFIG_DWMAC_IPQ806X=y
|
|||
CONFIG_DYNAMIC_DEBUG=y
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_ETHERNET_PACKET_MANGLE=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
|
@ -219,7 +213,6 @@ CONFIG_KRAITCC=y
|
|||
CONFIG_KRAIT_CLOCKS=y
|
||||
CONFIG_KRAIT_L2_ACCESSORS=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LLD_VERSION=0
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LZO_COMPRESS=y
|
468
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
Executable file
468
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
Executable file
|
@ -0,0 +1,468 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8062.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/delete-node/ &nand_pins;
|
||||
|
||||
/ {
|
||||
model = "NEC Platforms Aterm WG2600HP3";
|
||||
compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac2;
|
||||
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&buttons_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
mode0 {
|
||||
label = "mode0";
|
||||
gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
mode1 {
|
||||
label = "mode1";
|
||||
gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
active_green {
|
||||
label = "green:active";
|
||||
gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
active_red {
|
||||
label = "red:active";
|
||||
gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g_green {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan2g_red {
|
||||
label = "red:wlan2g";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan5g_green {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wlan5g_red {
|
||||
label = "red:wlan5g";
|
||||
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
tv_green {
|
||||
label = "green:tv";
|
||||
gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
tv_red {
|
||||
label = "red:tv";
|
||||
gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
converter_green {
|
||||
label = "green:converter";
|
||||
gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
converter_red {
|
||||
label = "red:converter";
|
||||
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
pinctrl-0 = <&akro_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
buttons_pins: buttons_pins {
|
||||
mux {
|
||||
pins = "gpio22", "gpio24", "gpio40",
|
||||
"gpio41";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
leds_pins: leds_pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15", "gpio35",
|
||||
"gpio36", "gpio38", "gpio42",
|
||||
"gpio43", "gpio46", "gpio55",
|
||||
"gpio56", "gpio57", "gpio58";
|
||||
function = "gpio";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
akro2 {
|
||||
pins = "gpio15", "gpio35", "gpio38",
|
||||
"gpio42", "gpio43", "gpio46",
|
||||
"gpio55", "gpio56", "gpio57",
|
||||
"gpio58";
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
akro4 {
|
||||
pins = "gpio14", "gpio36";
|
||||
drive-strength = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Stock firmware has the following settings, so let's do the same.
|
||||
* I don't sure why these are required.
|
||||
*/
|
||||
akro_pins: akro_pinmux {
|
||||
akro {
|
||||
pins = "gpio17", "gpio26", "gpio47";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
reset {
|
||||
pins = "gpio45";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
gmac0_rgmii {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
|
||||
spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0000000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x0020000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x0040000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "SBL3";
|
||||
reg = <0x0080000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x0100000 0x0010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@110000 {
|
||||
label = "SSD";
|
||||
reg = <0x0110000 0x0010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
label = "TZ";
|
||||
reg = <0x0120000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1a0000 {
|
||||
label = "RPM";
|
||||
reg = <0x01a0000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@220000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0220000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2a0000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x02a0000 0x0010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@2b0000 {
|
||||
label = "PRODUCTDATA";
|
||||
reg = <0x02b0000 0x0030000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2e0000 {
|
||||
label = "ART";
|
||||
reg = <0x02e0000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@320000 {
|
||||
label = "TP";
|
||||
reg = <0x0320000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@360000 {
|
||||
label = "TINY";
|
||||
reg = <0x0360000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@860000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x0860000 0x17a0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
|
||||
|
||||
nvmem-cells = <&macaddr_PRODUCTDATA_12>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
force_gen1 = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
ieee80211-freq-limit = <2400000 2483000>;
|
||||
qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
|
||||
|
||||
nvmem-cells = <&macaddr_PRODUCTDATA_c>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x80080080 /* PAD0_MODE */
|
||||
0x0c 0x06000000 /* PAD6_MODE */
|
||||
0x10 0x002613a0 /* PWS_REG */
|
||||
0x50 0xcc36cc36 /* LED_CTRL0 */
|
||||
0x54 0xca36ca36 /* LED_CTRL1 */
|
||||
0x58 0xc936c936 /* LED_CTRL2 */
|
||||
0x5c 0x03ffff00 /* LED_CTRL3 */
|
||||
0x7c 0x0000004e /* PORT0_STATUS */
|
||||
0x94 0x0000004e /* PORT6_STATUS */
|
||||
0xe0 0xc74164de /* SGMII_CTRL */
|
||||
0xe4 0x0006a545 /* MAC_PWR_SEL */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
mdiobus = <&mdio0>;
|
||||
nvmem-cells = <&macaddr_factory_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
mdiobus = <&mdio0>;
|
||||
nvmem-cells = <&macaddr_factory_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
macaddr_PRODUCTDATA_c: macaddr@c {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
|
||||
macaddr_PRODUCTDATA_12: macaddr@12 {
|
||||
reg = <0x12 0x6>;
|
||||
};
|
||||
};
|
98
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062.dtsi
Executable file
98
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062.dtsi
Executable file
|
@ -0,0 +1,98 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
#include "qcom-ipq8064.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8062";
|
||||
compatible = "qcom,ipq8062", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "okay";
|
||||
|
||||
serial@16340000 {
|
||||
status = "okay";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
&opp_table0 {
|
||||
/delete-node/opp-1200000000;
|
||||
/delete-node/opp-1400000000;
|
||||
|
||||
/*
|
||||
* Voltage thresholds are <target min max>
|
||||
*/
|
||||
opp-384000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <950000 902500 997500>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <900000 855000 945000>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <850000 807500 892500>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
|
||||
};
|
||||
|
||||
opp-600000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <950000 945000 955000>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <900000 895000 905000>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <850000 845000 855000>;
|
||||
};
|
||||
|
||||
opp-800000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <1000000 995000 1005000>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <950000 945000 955000>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <900000 895000 905000>;
|
||||
};
|
||||
|
||||
opp-1000000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <1050000 997500 1102500>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <1000000 995000 1005000>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <950000 945000 955000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&smb208_s2a {
|
||||
regulator-max-microvolt = <1150000>;
|
||||
};
|
||||
|
||||
&smb208_s2b {
|
||||
regulator-max-microvolt = <1150000>;
|
||||
};
|
364
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
Executable file
364
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
Executable file
|
@ -0,0 +1,364 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
label-mac-device = &gmac2;
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pin: usb0_pwr_en_pin {
|
||||
mux {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pin: usb1_pwr_en_pin {
|
||||
mux {
|
||||
pins = "gpio23";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x40000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "SBL3";
|
||||
reg = <0x60000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@90000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "SSD";
|
||||
reg = <0xa0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b0000 {
|
||||
label = "TZ";
|
||||
reg = <0xb0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e0000 {
|
||||
label = "RPM";
|
||||
reg = <0xe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "fs-uboot";
|
||||
reg = <0x100000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@170000 {
|
||||
label = "uboot-env";
|
||||
reg = <0x170000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1b0000 {
|
||||
label = "radio";
|
||||
reg = <0x1b0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f0000 {
|
||||
label = "os-image";
|
||||
reg = <0x1f0000 0x400000>;
|
||||
};
|
||||
|
||||
partition@5f0000 {
|
||||
label = "rootfs";
|
||||
reg = <0x5f0000 0x1900000>;
|
||||
};
|
||||
|
||||
defaultmac: partition@1ef0000 {
|
||||
label = "default-mac";
|
||||
reg = <0x1ef0000 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1ef0200 {
|
||||
label = "pin";
|
||||
reg = <0x1ef0200 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1ef0400 {
|
||||
label = "product-info";
|
||||
reg = <0x1ef0400 0x0fc00>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f00000 {
|
||||
label = "partition-table";
|
||||
reg = <0x1f00000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f10000 {
|
||||
label = "soft-version";
|
||||
reg = <0x1f10000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f20000 {
|
||||
label = "support-list";
|
||||
reg = <0x1f20000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f30000 {
|
||||
label = "profile";
|
||||
reg = <0x1f30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f40000 {
|
||||
label = "default-config";
|
||||
reg = <0x1f40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f50000 {
|
||||
label = "user-config";
|
||||
reg = <0x1f50000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f90000 {
|
||||
label = "qos-db";
|
||||
reg = <0x1f90000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fd0000 {
|
||||
label = "usb-config";
|
||||
reg = <0x1fd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "log";
|
||||
reg = <0x1fe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_8>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(-1)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_8>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_8>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_8>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&defaultmac {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_defaultmac_8: macaddr@8 {
|
||||
reg = <0x8 0x6>;
|
||||
};
|
||||
};
|
135
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
Executable file
135
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
Executable file
|
@ -0,0 +1,135 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8064-ad7200-c2600.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link Talon AD7200";
|
||||
compatible = "tplink,ad7200", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
led_enable {
|
||||
label = "led-enable";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_LIGHTS_TOGGLE>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
lan {
|
||||
label = "blue:lan";
|
||||
gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb1 {
|
||||
label = "blue:usb1";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "blue:wlan5g";
|
||||
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "blue:usb3";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "blue:wlan2g";
|
||||
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
label = "orange:wan";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_blue {
|
||||
label = "blue:wan";
|
||||
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "blue:wps";
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan60g {
|
||||
label = "blue:wlan60g";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status: status {
|
||||
label = "blue:status";
|
||||
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio53", "gpio54", "gpio67";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
|
||||
"gpio33", "gpio55", "gpio56", "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
};
|
121
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
Executable file
121
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
Executable file
|
@ -0,0 +1,121 @@
|
|||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
|
||||
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&flash {
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
159
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
Executable file
159
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
Executable file
|
@ -0,0 +1,159 @@
|
|||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064/AP161";
|
||||
compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29",
|
||||
"gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59",
|
||||
"gpio60", "gpio61", "gpio62",
|
||||
"gpio2", "gpio66";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flash {
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x20080 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
qca,phy-rgmii-en;
|
||||
qca,txclk-delay-en;
|
||||
qca,rxclk-delay-en;
|
||||
};
|
||||
|
||||
phy3: ethernet-phy@3 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
119
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
Executable file
119
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
Executable file
|
@ -0,0 +1,119 @@
|
|||
#include "qcom-ipq8064-ad7200-c2600.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link Archer C2600";
|
||||
compatible = "tplink,c2600", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
led-boot = &power;
|
||||
led-failsafe = &general;
|
||||
led-running = &power;
|
||||
led-upgrade = &general;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
ledswitch {
|
||||
label = "ledswitch";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_LIGHTS_TOGGLE>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
lan {
|
||||
label = "white:lan";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb4 {
|
||||
label = "white:usb_4";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb_2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
general: general {
|
||||
label = "white:general";
|
||||
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
|
||||
"gpio53", "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
371
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
Executable file
371
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
Executable file
|
@ -0,0 +1,371 @@
|
|||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4 D7800";
|
||||
compatible = "netgear,d7800", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0xe000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_white: power_white {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(1)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(2)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
artbak: art@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0400000>;
|
||||
};
|
||||
|
||||
ubi@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0x1C00000>;
|
||||
};
|
||||
|
||||
netgear@3480000 {
|
||||
label = "netgear";
|
||||
reg = <0x3480000 0x4480000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
reserve@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
163
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts
Executable file
163
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts
Executable file
|
@ -0,0 +1,163 @@
|
|||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064/DB149";
|
||||
compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi2_serial;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
rgmii0_pins: rgmii0_pins {
|
||||
mux {
|
||||
pins = "gpio2", "gpio66";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi2 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "okay";
|
||||
|
||||
gsbi2_serial: serial@12490000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gsbi4_serial {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&flash {
|
||||
m25p,fast-read;
|
||||
|
||||
partition@0 {
|
||||
label = "lowlevel_init";
|
||||
reg = <0x0 0x1b0000>;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "u-boot";
|
||||
reg = <0x1b0000 0x80000>;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x230000 0x40000>;
|
||||
};
|
||||
|
||||
partition@3 {
|
||||
label = "caldata";
|
||||
reg = <0x270000 0x40000>;
|
||||
};
|
||||
|
||||
partition@4 {
|
||||
label = "firmware";
|
||||
reg = <0x2b0000 0x1d50000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
phy6: ethernet-phy@6 {
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
phy7: ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <0>;
|
||||
phy-handle = <&phy4>;
|
||||
|
||||
pinctrl-0 = <&rgmii0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
phy-handle = <&phy6>;
|
||||
};
|
||||
|
||||
&gmac3 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <3>;
|
||||
phy-handle = <&phy7>;
|
||||
};
|
91
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
Executable file
91
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
Executable file
|
@ -0,0 +1,91 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8064-eax500.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys EA7500 V1 WiFi Router";
|
||||
compatible = "linksys,ea7500-v1", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0xe000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
/* look for root deviceblock nbr in this bootarg */
|
||||
find-rootblock = "ubi.mtd=";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio65", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio6";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@5f80000 {
|
||||
label = "sysdiag";
|
||||
reg = <0x5f80000 0x100000>;
|
||||
};
|
||||
|
||||
partition@6080000 {
|
||||
label = "syscfg";
|
||||
reg = <0x6080000 0x1f80000>;
|
||||
};
|
||||
};
|
128
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
Executable file
128
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
Executable file
|
@ -0,0 +1,128 @@
|
|||
#include "qcom-ipq8064-eax500.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys EA8500 WiFi Router";
|
||||
compatible = "linksys,ea8500", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wps {
|
||||
label = "green:wps";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "green:wifi";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio65", "gpio67", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio53", "gpio54";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@5f80000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5f80000 0x2080000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <1>;
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,emulation = <0>;
|
||||
};
|
||||
|
||||
/* LAN */
|
||||
&gmac2 {
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,emulation = <0>;
|
||||
};
|
207
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
Executable file
207
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
Executable file
|
@ -0,0 +1,207 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyMSM0,115200n8";
|
||||
/* append to bootargs adding the root deviceblock nbr from bootloader */
|
||||
append-rootblock = "ubi.mtd=";
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x0c80000>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0000000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x0040000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "SBL2";
|
||||
reg = <0x0180000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2c0000 {
|
||||
label = "SBL3";
|
||||
reg = <0x02c0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@540000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x0540000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@660000 {
|
||||
label = "SSD";
|
||||
reg = <0x0660000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@780000 {
|
||||
label = "TZ";
|
||||
reg = <0x0780000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
label = "RPM";
|
||||
reg = <0x0a00000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@c80000 {
|
||||
label = "art";
|
||||
reg = <0x0c80000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@dc0000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0dc0000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ec0000 {
|
||||
label = "u_env";
|
||||
reg = <0x0ec0000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@f00000 {
|
||||
label = "s_env";
|
||||
reg = <0x0f00000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@f40000 {
|
||||
label = "devinfo";
|
||||
reg = <0x0f40000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "kernel1";
|
||||
reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs */
|
||||
};
|
||||
|
||||
partition@1280000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1280000 0x2500000>;
|
||||
};
|
||||
|
||||
partition@3780000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3780000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@3a80000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3a80000 0x2500000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x00010 0x2613a0 /* PWS_REG */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
250
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts
Executable file
250
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts
Executable file
|
@ -0,0 +1,250 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
compatible = "asrock,g10", "qcom,ipq8064";
|
||||
model = "ASRock G10";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
ethernet1 = &gmac0;
|
||||
|
||||
led-boot = &led_status_blue;
|
||||
led-failsafe = &led_status_amber;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-override = "console=ttyMSM0,115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/*
|
||||
* this is a bit misleading. Because there are about seven
|
||||
* multicolor LEDs connected all wired together in parallel.
|
||||
*/
|
||||
|
||||
status_yellow {
|
||||
label = "yellow:status";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_amber: status_amber {
|
||||
label = "amber:status";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_blue: status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/*
|
||||
* LED is declared in vendors boardfile but it's not
|
||||
* working and the manual doesn't mention anything
|
||||
* about the LED being white.
|
||||
|
||||
status_white {
|
||||
label = "white:status";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
*/
|
||||
};
|
||||
|
||||
i2c-gpio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
|
||||
<&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
|
||||
i2c-gpio,delay-us = <5>;
|
||||
i2c-gpio,scl-output-only;
|
||||
|
||||
mcu@50 {
|
||||
reg = <0x50>;
|
||||
compatible = "sonix,sn8f25e21";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ir-remote {
|
||||
label = "ir-remote";
|
||||
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps5g {
|
||||
label = "wps5g";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps2g {
|
||||
label = "wps2g";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4_serial {
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio26";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio15", "gpio16", "gpio64", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0_pins {
|
||||
mux {
|
||||
pins = "gpio10", "gpio11";
|
||||
function = "gsbi4";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rpm {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcsr {
|
||||
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
|
||||
};
|
||||
|
||||
/delete-node/ &pcie2_pins;
|
||||
/delete-node/ &pcie2;
|
316
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
Executable file
316
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
Executable file
|
@ -0,0 +1,316 @@
|
|||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4 R7500";
|
||||
compatible = "netgear,r7500", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0xe000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_white: power_white {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
status = "disabled";
|
||||
|
||||
spi@1a280000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
clocks = <&gcc USB30_1_MASTER_CLK>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
clocks = <&gcc USB30_0_MASTER_CLK>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1340000 {
|
||||
label = "kernel";
|
||||
reg = <0x1340000 0x0400000>;
|
||||
};
|
||||
|
||||
ubi@1740000 {
|
||||
label = "ubi";
|
||||
reg = <0x1740000 0x1600000>;
|
||||
};
|
||||
|
||||
netgear@2d40000 {
|
||||
label = "netgear";
|
||||
reg = <0x2d40000 0x0c00000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
reserve@3940000 {
|
||||
label = "reserve";
|
||||
reg = <0x3940000 0x46c0000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&tcsr {
|
||||
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
|
||||
compatible = "qcom,tcsr";
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
369
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
Executable file
369
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
Executable file
|
@ -0,0 +1,369 @@
|
|||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4 R7500v2";
|
||||
compatible = "netgear,r7500v2", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rsvd@5fe00000 {
|
||||
reg = <0x5fe00000 0x200000>;
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb1 {
|
||||
label = "amber:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "amber:usb3";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
status {
|
||||
label = "amber:status";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet {
|
||||
label = "white:internet";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(1)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(2)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
artbak: art@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0400000>;
|
||||
};
|
||||
|
||||
ubi@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0x6080000>;
|
||||
};
|
||||
|
||||
reserve@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
317
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
Executable file
317
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
Executable file
|
@ -0,0 +1,317 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Ubiquiti UniFi AC HD";
|
||||
compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac2;
|
||||
led-boot = &led_dome_white;
|
||||
led-failsafe = &led_dome_white;
|
||||
led-running = &led_dome_blue;
|
||||
led-upgrade = &led_dome_blue;
|
||||
mdio-gpio0 = &mdio0;
|
||||
ethernet0 = &gmac2;
|
||||
ethernet1 = &gmac1;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_dome_blue: dome_blue {
|
||||
label = "blue:dome";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_dome_white: dome_white {
|
||||
label = "white:dome";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio9", "gpio53";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-none;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&CPU_SPC {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
status = "okay";
|
||||
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
|
||||
spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
cs-gpios = <&qcom_pinmux 20 0>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "mx25u25635f", "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "SBL2";
|
||||
reg = <0x30000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "SBL3";
|
||||
reg = <0x50000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x80000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@90000 {
|
||||
label = "SSD";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "TZ";
|
||||
reg = <0xa0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@d0000 {
|
||||
label = "RPM";
|
||||
reg = <0xd0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
label = "APPSBL";
|
||||
reg = <0xf0000 0xc0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1b0000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1b0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
eeprom: partition@1c0000 {
|
||||
label = "EEPROM";
|
||||
reg = <0x1c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1d0000 {
|
||||
label = "bootselect";
|
||||
reg = <0x1d0000 0x10000>;
|
||||
};
|
||||
|
||||
partition@1e0000 {
|
||||
compatible = "denx,fit";
|
||||
label = "firmware";
|
||||
reg = <0x1e0000 0xe70000>;
|
||||
};
|
||||
|
||||
partition@1050000 {
|
||||
label = "kernel1";
|
||||
reg = <0x1050000 0xe70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1ec0000 {
|
||||
label = "debug";
|
||||
reg = <0x1ec0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fc0000 {
|
||||
label = "cfg";
|
||||
reg = <0x1fc0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
phy5: ethernet-phy@5 {
|
||||
reg = <5>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
mdiobus = <&mdio0>;
|
||||
phy-handle = <&phy5>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
nvmem-cells = <&macaddr_eeprom_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
mdiobus = <&mdio0>;
|
||||
phy-handle = <&phy4>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_eeprom_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcsr {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hs_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ss_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hs_phy_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ss_phy_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&eeprom {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_eeprom_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_eeprom_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
69
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
Executable file
69
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
Executable file
|
@ -0,0 +1,69 @@
|
|||
#include "qcom-ipq8064.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "okay";
|
||||
|
||||
serial@16340000 {
|
||||
status = "okay";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
&CPU_SPC {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&sata {
|
||||
ports-implemented = <0x1>;
|
||||
};
|
||||
|
||||
&ss_phy_0 {
|
||||
qcom,rx-eq = <2>;
|
||||
qcom,tx-deamp_3_5db = <32>;
|
||||
qcom,mpll = <5>;
|
||||
};
|
||||
|
||||
&ss_phy_1 {
|
||||
qcom,rx-eq = <2>;
|
||||
qcom,tx-deamp_3_5db = <32>;
|
||||
qcom,mpll = <5>;
|
||||
};
|
393
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
Executable file
393
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
Executable file
|
@ -0,0 +1,393 @@
|
|||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "TP-Link Archer VR2600v";
|
||||
compatible = "tplink,vr2600v", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &general;
|
||||
led-running = &power;
|
||||
led-upgrade = &general;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
dect {
|
||||
label = "dect";
|
||||
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_PHONE>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
ledswitch {
|
||||
label = "ledswitch";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_LIGHTS_TOGGLE>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
dsl {
|
||||
label = "white:dsl";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "white:usb";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "white:lan";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "white:wlan2g";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "white:wlan5g";
|
||||
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
phone {
|
||||
label = "white:phone";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
general: general {
|
||||
label = "white:general";
|
||||
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
|
||||
"gpio26", "gpio53", "gpio56", "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
W25Q128@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x40000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@80000 {
|
||||
label = "SBL3";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@100000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x100000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@110000 {
|
||||
label = "SSD";
|
||||
reg = <0x110000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@120000 {
|
||||
label = "TZ";
|
||||
reg = <0x120000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@1a0000 {
|
||||
label = "RPM";
|
||||
reg = <0x1a0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@220000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x220000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@2a0000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x2a0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
OLDART@2e0000 {
|
||||
label = "OLDART";
|
||||
reg = <0x2e0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@320000 {
|
||||
label = "kernel";
|
||||
reg = <0x320000 0x300000>;
|
||||
};
|
||||
|
||||
rootfs@620000 {
|
||||
label = "rootfs";
|
||||
reg = <0x620000 0x960000>;
|
||||
};
|
||||
|
||||
defaultmac: default-mac@0xfaf100 {
|
||||
label = "default-mac";
|
||||
reg = <0xfaf100 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ART@fc0000 {
|
||||
label = "ART";
|
||||
reg = <0xfc0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_defaultmac_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&defaultmac {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_defaultmac_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
};
|
436
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
Executable file
436
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
Executable file
|
@ -0,0 +1,436 @@
|
|||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "NEC Aterm WG2600HP";
|
||||
compatible = "nec,wg2600hp", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_green;
|
||||
led-failsafe = &power_red;
|
||||
led-running = &power_green;
|
||||
led-upgrade = &power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
bridge {
|
||||
label = "bridge";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
converter {
|
||||
label = "converter";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
converter_green {
|
||||
label = "green:converter";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
active_green {
|
||||
label = "green:active";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
active_red {
|
||||
label = "red:active";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
converter_red {
|
||||
label = "red:converter";
|
||||
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g_green {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g_red {
|
||||
label = "red:wlan2g";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan5g_green {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan5g_red {
|
||||
label = "red:wlan5g";
|
||||
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
tv_green {
|
||||
label = "green:tv";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
tv_red {
|
||||
label = "red:tv";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&CPU_SPC {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x06000000 /* PAD0_MODE */
|
||||
0x0000c 0x00080080 /* PAD6_MODE */
|
||||
0x000e4 0x0006a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x0000004e /* PORT0_STATUS */
|
||||
0x00094 0x0000004e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_PRODUCTDATA_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_PRODUCTDATA_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
status = "okay";
|
||||
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
|
||||
spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x40000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@80000 {
|
||||
label = "SBL3";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@100000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x100000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@110000 {
|
||||
label = "SSD";
|
||||
reg = <0x110000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@120000 {
|
||||
label = "TZ";
|
||||
reg = <0x120000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@1a0000 {
|
||||
label = "RPM";
|
||||
reg = <0x1a0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@220000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x220000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@2a0000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x2a0000 0x10000>;
|
||||
};
|
||||
|
||||
PRODUCTDATA: PRODUCTDATA@2b0000 {
|
||||
label = "PRODUCTDATA";
|
||||
reg = <0x2b0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ART@2e0000 {
|
||||
label = "ART";
|
||||
reg = <0x2e0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TP@320000 {
|
||||
label = "TP";
|
||||
reg = <0x320000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TINY@360000 {
|
||||
label = "TINY";
|
||||
reg = <0x360000 0x500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@860000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x860000 0x17a0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_PRODUCTDATA_12>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_PRODUCTDATA_c>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio54", "gpio24", "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
|
||||
"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
|
||||
"gpio64", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_pwr_en_pins: usb_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio22";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&PRODUCTDATA {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_PRODUCTDATA_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_PRODUCTDATA_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
macaddr_PRODUCTDATA_c: macaddr@c {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
|
||||
macaddr_PRODUCTDATA_12: macaddr@12 {
|
||||
reg = <0x12 0x6>;
|
||||
};
|
||||
};
|
465
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
Executable file
465
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
Executable file
|
@ -0,0 +1,465 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
|
||||
* Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
|
||||
* All rights reserved.
|
||||
*/
|
||||
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
compatible = "compex,wpq864", "qcom,ipq8064";
|
||||
model = "Compex WPQ864";
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
ethernet0 = &gmac1;
|
||||
ethernet1 = &gmac0;
|
||||
|
||||
led-boot = &led_pass;
|
||||
led-failsafe = &led_fail;
|
||||
led-running = &led_pass;
|
||||
led-upgrade = &led_pass;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
rss4 {
|
||||
label = "green:rss4";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rss3 {
|
||||
label = "green:rss3";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
rss2 {
|
||||
label = "orange:rss2";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rss1 {
|
||||
label = "red:rss1";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_pass: pass {
|
||||
label = "green:pass";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_fail: fail {
|
||||
label = "green:fail";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "green:usb";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb-pcie {
|
||||
label = "green:usb-pcie";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "gpio-beeper";
|
||||
|
||||
pinctrl-0 = <&beeper_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&rpm {
|
||||
pinctrl-0 = <&rpm_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mt29f2g08abbeah4@0 {
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0000000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x0040000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@180000 {
|
||||
label = "SBL2";
|
||||
reg = <0x0180000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@2c0000 {
|
||||
label = "SBL3";
|
||||
reg = <0x02c0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@540000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x0540000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@660000 {
|
||||
label = "SSD";
|
||||
reg = <0x0660000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@780000 {
|
||||
label = "TZ";
|
||||
reg = <0x0780000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@a00000 {
|
||||
label = "RPM";
|
||||
reg = <0x0a00000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
};
|
||||
|
||||
ART@1200000 {
|
||||
label = "ART";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
};
|
||||
|
||||
ubi@1340000 {
|
||||
label = "ubi";
|
||||
reg = <0x1340000 0x4000000>;
|
||||
};
|
||||
|
||||
BOOTCONFIG@5340000 {
|
||||
label = "BOOTCONFIG";
|
||||
reg = <0x5340000 0x0060000>;
|
||||
};
|
||||
|
||||
SBL2-1@53a0000- {
|
||||
label = "SBL2_1";
|
||||
reg = <0x53a0000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3-1@54e0000 {
|
||||
label = "SBL3_1";
|
||||
reg = <0x54e0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG-1@5760000 {
|
||||
label = "DDRCONFIG_1";
|
||||
reg = <0x5760000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD-1@5880000 {
|
||||
label = "SSD_1";
|
||||
reg = <0x5880000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ-1@59a0000 {
|
||||
label = "TZ_1";
|
||||
reg = <0x59a0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM-1@5c20000 {
|
||||
label = "RPM_1";
|
||||
reg = <0x5c20000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
BOOTCONFIG1@5ea0000 {
|
||||
label = "BOOTCONFIG1";
|
||||
reg = <0x5ea0000 0x0060000>;
|
||||
};
|
||||
|
||||
APPSBL-1@5f00000 {
|
||||
label = "APPSBL_1";
|
||||
reg = <0x5f00000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ubi-1@6400000 {
|
||||
label = "ubi_1";
|
||||
reg = <0x6400000 0x4000000>;
|
||||
};
|
||||
|
||||
unused@a400000 {
|
||||
label = "unused";
|
||||
reg = <0xa400000 0x5c00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4_serial {
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&flash {
|
||||
compatible = "jedec,spi-nor";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ss_phy_0 { /* USB3 port 0 SS phy */
|
||||
status = "okay";
|
||||
|
||||
rx_eq = <2>;
|
||||
tx_deamp_3_5db = <32>;
|
||||
mpll = <160>;
|
||||
};
|
||||
|
||||
&ss_phy_1 { /* USB3 port 1 SS phy */
|
||||
status = "okay";
|
||||
|
||||
rx_eq = <2>;
|
||||
tx_deamp_3_5db = <32>;
|
||||
mpll = <160>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
||||
state_default: pinctrl0 {
|
||||
pcie0_pcie2_perst {
|
||||
pins = "gpio3";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22",
|
||||
"gpio23", "gpio24", "gpio25", "gpio53";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio54";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
beeper_pins: beeper_pins {
|
||||
mux {
|
||||
pins = "gpio55";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
rpm_pins: rpm_pins {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0_pins {
|
||||
mux {
|
||||
pins = "gpio10", "gpio11";
|
||||
function = "gsbi4";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcsr {
|
||||
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
|
||||
};
|
520
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
Executable file
520
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
Executable file
|
@ -0,0 +1,520 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Buffalo WXR-2533DHP";
|
||||
compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
|
||||
|
||||
memory@42000000 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &power;
|
||||
led-failsafe = &diag;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
|
||||
bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb {
|
||||
label = "green:usb";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "usbport";
|
||||
trigger-sources = <&hub_port0 &hub_port1>;
|
||||
};
|
||||
|
||||
guestport {
|
||||
label = "green:guestport";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
diag: diag {
|
||||
label = "orange:diag";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet_orange {
|
||||
label = "orange:internet";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet_white {
|
||||
label = "white:internet";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wireless_orange {
|
||||
label = "orange:wireless";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wireless_white {
|
||||
label = "white:wireless";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
router_orange {
|
||||
label = "orange:router";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
router_white {
|
||||
label = "white:router";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
label = "power";
|
||||
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
eject {
|
||||
label = "eject";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_EJECTCD>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
guest {
|
||||
label = "guest";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
ap {
|
||||
label = "ap";
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
router {
|
||||
label = "router";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
auto {
|
||||
label = "auto";
|
||||
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ubi@0 {
|
||||
label = "ubi";
|
||||
reg = <0x0000000 0x4000000>;
|
||||
};
|
||||
|
||||
rootfs_1@4000000 {
|
||||
label = "rootfs_1";
|
||||
reg = <0x4000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x07600000 /* PAD0_MODE */
|
||||
0x00008 0x01000000 /* PAD5_MODE */
|
||||
0x0000c 0x00000080 /* PAD6_MODE */
|
||||
0x00050 0xcc35cc35 /* LED_CTRL0 */
|
||||
0x00054 0xca35ca35 /* LED_CTRL1 */
|
||||
0x00058 0xc935c935 /* LED_CTRL2 */
|
||||
0x0005c 0x03ffff00 /* LED_CTRL3 */
|
||||
0x000e4 0x0006a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x0000007e /* PORT0_STATUS */
|
||||
0x00094 0x0000007e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_ART_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
nvmem-cells = <&macaddr_ART_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4_serial {
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
|
||||
spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@10000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x10000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@30000 {
|
||||
label = "SBL2";
|
||||
reg = <0x30000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@60000 {
|
||||
label = "SBL3";
|
||||
reg = <0x60000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@90000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@a0000 {
|
||||
label = "SSD";
|
||||
reg = <0xa0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@b0000 {
|
||||
label = "TZ";
|
||||
reg = <0xb0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@e0000 {
|
||||
label = "RPM";
|
||||
reg = <0xe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@100000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x100000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@170000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x170000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ART: ART@180000 {
|
||||
label = "ART";
|
||||
reg = <0x180000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
BOOTCONFIG@1c0000 {
|
||||
label = "BOOTCONFIG";
|
||||
reg = <0x1c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL_1@1d0000 {
|
||||
label = "APPSBL_1";
|
||||
reg = <0x1d0000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dwc3_0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub_port0: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&dwc3_1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub_port1: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_ART_1e>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_ART_18>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
|
||||
"gpio58", "gpio64", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
|
||||
"gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0_pins {
|
||||
mux {
|
||||
pins = "gpio10", "gpio11";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs{
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_pwr_en_pins: usb_pwr_en_pins {
|
||||
mux{
|
||||
pins = "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ART {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_ART_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_ART_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
macaddr_ART_18: macaddr@18 {
|
||||
reg = <0x18 0x6>;
|
||||
};
|
||||
|
||||
macaddr_ART_1e: macaddr@1e {
|
||||
reg = <0x1e 0x6>;
|
||||
};
|
||||
};
|
316
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
Executable file
316
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
Executable file
|
@ -0,0 +1,316 @@
|
|||
#include "qcom-ipq8065.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "ZyXEL NBG6817";
|
||||
compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
sdcc1 = &sdcc1;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
|
||||
append-rootblock = "root=/dev/mmcblk0p";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
internet {
|
||||
label = "white:internet";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi2g {
|
||||
label = "amber:wifi2g";
|
||||
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* wifi2g amber from the manual is missing */
|
||||
|
||||
wifi5g {
|
||||
label = "amber:wifi5g";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* wifi5g amber from the manual is missing */
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio53", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio9", "gpio26", "gpio33", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
pwr {
|
||||
pins = "gpio17";
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ovc {
|
||||
pins = "gpio16";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
pwr {
|
||||
pins = "gpio14";
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ovc {
|
||||
pins = "gpio15";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <51200000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
||||
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
||||
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
||||
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
||||
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
||||
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
||||
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
||||
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
||||
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
||||
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
||||
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
||||
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
||||
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
||||
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
qca,ar8327-initvals = <
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&amba {
|
||||
sdcc1: sdcc@12400000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
439
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
Executable file
439
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
Executable file
|
@ -0,0 +1,439 @@
|
|||
#include "qcom-ipq8065.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rsvd@5fe00000 {
|
||||
reg = <0x5fe00000 0x200000>;
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac2;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
|
||||
mdio-gpio0 = &mdio0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power_white: power_white {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9",
|
||||
"gpio22", "gpio23", "gpio24",
|
||||
"gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29",
|
||||
"gpio30", "gpio31", "gpio32";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
spi6_pins: spi6_pins {
|
||||
mux {
|
||||
pins = "gpio55", "gpio56", "gpio58";
|
||||
function = "gsbi6";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
mosi {
|
||||
pins = "gpio55";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
miso {
|
||||
pins = "gpio56";
|
||||
drive-strength = <14>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio57";
|
||||
drive-strength = <12>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio58";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
reset {
|
||||
pins = "gpio33";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
||||
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
||||
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
||||
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
||||
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
||||
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
||||
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
||||
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
||||
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
||||
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
||||
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
||||
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
||||
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
||||
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
||||
>;
|
||||
qca,ar8327-vlans = <
|
||||
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
|
||||
0x2 0x21 /* VLAN2 Ports 0/5 */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
qca,ar8327-initvals = <
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi0: wifi@1,0 {
|
||||
compatible = "pci168c,0046";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi1: wifi@1,0 {
|
||||
compatible = "pci168c,0046";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
48
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
Executable file
48
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
Executable file
|
@ -0,0 +1,48 @@
|
|||
#include "qcom-ipq8065-nighthawk.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4S R7800";
|
||||
compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
|
||||
};
|
||||
|
||||
&leds {
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0x6080000>;
|
||||
};
|
||||
|
||||
partition@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(1)>;
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(2)>;
|
||||
};
|
321
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
Executable file
321
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
Executable file
|
@ -0,0 +1,321 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "qcom-ipq8065.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Askey RT4230W REV6";
|
||||
compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x3e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &ledctrl3;
|
||||
led-failsafe = &ledctrl1;
|
||||
led-running = &ledctrl2;
|
||||
led-upgrade = &ledctrl3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ledctrl1: ledctrl1 {
|
||||
label = "ledctrl1";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
ledctrl2: ledctrl2 {
|
||||
label = "ledctrl2";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
ledctrl3: ledctrl3 {
|
||||
label = "ledctrl3";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio54", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio22", "gpio23", "gpio24";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:SBL1";
|
||||
reg = <0x0000000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "0:MIBIB";
|
||||
reg = <0x0040000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
partition@180000 {
|
||||
label = "0:SBL2";
|
||||
reg = <0x0180000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
partition@2c0000 {
|
||||
label = "0:SBL3";
|
||||
reg = <0x02c0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
partition@540000 {
|
||||
label = "0:DDRCONFIG";
|
||||
reg = <0x0540000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
partition@660000 {
|
||||
label = "0:SSD";
|
||||
reg = <0x0660000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
partition@780000 {
|
||||
label = "0:TZ";
|
||||
reg = <0x0780000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
partition@a00000 {
|
||||
label = "0:RPM";
|
||||
reg = <0x0a00000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
partition@c80000 {
|
||||
label = "0:APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1180000 {
|
||||
label = "0:APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
};
|
||||
ART: partition@1200000 {
|
||||
label = "0:ART";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1340000 {
|
||||
label = "0:BOOTCONFIG";
|
||||
reg = <0x1340000 0x0060000>;
|
||||
read-only;
|
||||
};
|
||||
partition@13a0000 {
|
||||
label = "0:SBL2_1";
|
||||
reg = <0x13a0000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
partition@14e0000 {
|
||||
label = "0:SBL3_1";
|
||||
reg = <0x14e0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1760000 {
|
||||
label = "0:DDRCONFIG_1";
|
||||
reg = <0x1760000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1880000 {
|
||||
label = "0:SSD_1";
|
||||
reg = <0x1880000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
partition@19a0000 {
|
||||
label = "0:TZ_1";
|
||||
reg = <0x19a0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1c20000 {
|
||||
label = "0:RPM_1";
|
||||
reg = <0x1c20000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1ea0000 {
|
||||
label = "0:BOOTCONFIG1";
|
||||
reg = <0x1ea0000 0x0060000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1f00000 {
|
||||
label = "0:APPSBL_1";
|
||||
reg = <0x1f00000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
partition@2400000 {
|
||||
label = "ubi";
|
||||
reg = <0x2400000 0x1a000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00050 0xcf02cf02 /* LED_CTRL_0 */
|
||||
0x00054 0xc832c832 /* LED_CTRL_1 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <0>;
|
||||
|
||||
nvmem-cells = <&macaddr_ART_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
nvmem-cells = <&macaddr_ART_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
clocks = <&gcc USB30_1_MASTER_CLK>;
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
clocks = <&gcc USB30_0_MASTER_CLK>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&ART {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_ART_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_ART_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
54
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-xr500.dts
Executable file
54
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-xr500.dts
Executable file
|
@ -0,0 +1,54 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8065-nighthawk.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk XR500";
|
||||
compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
};
|
||||
|
||||
&leds {
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0xce00000>;
|
||||
};
|
||||
|
||||
partition@e680000 {
|
||||
label = "reserve";
|
||||
reg = <0xe680000 0x0780000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
nvmem-cells = <&macaddr_art_c>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_c: macaddr@c {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
};
|
167
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
Executable file
167
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
Executable file
|
@ -0,0 +1,167 @@
|
|||
#include "qcom-ipq8064.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8065";
|
||||
compatible = "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "okay";
|
||||
|
||||
serial@16340000 {
|
||||
status = "okay";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
compatible = "qcom,pcie-ipq8064-v2";
|
||||
};
|
||||
|
||||
&sata {
|
||||
ports-implemented = <0x1>;
|
||||
};
|
||||
|
||||
&smb208_s2a {
|
||||
regulator-min-microvolt = <775000>;
|
||||
regulator-max-microvolt = <1275000>;
|
||||
};
|
||||
|
||||
&smb208_s2b {
|
||||
regulator-min-microvolt = <775000>;
|
||||
regulator-max-microvolt = <1275000>;
|
||||
};
|
||||
|
||||
&ss_phy_0 {
|
||||
qcom,rx-eq = <2>;
|
||||
qcom,tx-deamp_3_5db = <32>;
|
||||
qcom,mpll = <5>;
|
||||
};
|
||||
|
||||
&ss_phy_1 {
|
||||
qcom,rx-eq = <2>;
|
||||
qcom,tx-deamp_3_5db = <32>;
|
||||
qcom,mpll = <5>;
|
||||
};
|
||||
|
||||
&opp_table_l2 {
|
||||
/delete-node/opp-1200000000;
|
||||
|
||||
opp-1400000000 {
|
||||
opp-hz = /bits/ 64 <1400000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
clock-latency-ns = <100000>;
|
||||
opp-level = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&opp_table0 {
|
||||
/*
|
||||
* On ipq8065 1.2 ghz freq is not present
|
||||
* Remove it to make cpufreq work and not
|
||||
* complain for missing definition
|
||||
*/
|
||||
|
||||
/delete-node/opp-1200000000;
|
||||
|
||||
/*
|
||||
* Voltage thresholds are <target min max>
|
||||
*/
|
||||
opp-384000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
|
||||
opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
|
||||
opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
|
||||
opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
|
||||
};
|
||||
|
||||
opp-600000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
|
||||
opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
|
||||
opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
|
||||
opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
|
||||
};
|
||||
|
||||
opp-800000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
|
||||
opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
|
||||
opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
|
||||
opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
|
||||
};
|
||||
|
||||
opp-1000000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
|
||||
opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
|
||||
opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
|
||||
opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
|
||||
};
|
||||
|
||||
opp-1400000000 {
|
||||
opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
|
||||
opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
|
||||
opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
|
||||
opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
|
||||
opp-level = <1>;
|
||||
};
|
||||
|
||||
opp-1725000000 {
|
||||
opp-hz = /bits/ 64 <1725000000>;
|
||||
opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
|
||||
opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
|
||||
opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
|
||||
opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
|
||||
opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
|
||||
opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
|
||||
opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
|
||||
opp-supported-hw = <0x1>;
|
||||
clock-latency-ns = <100000>;
|
||||
opp-level = <2>;
|
||||
};
|
||||
};
|
|
@ -0,0 +1,239 @@
|
|||
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
device_type = "memory";
|
||||
linux,usable-memory = <0x41500000 0x1ea00000>;
|
||||
reg = <0x40000000 0x20000000>;
|
||||
};
|
||||
|
||||
cpus {
|
||||
idle-states {
|
||||
CPU_SPC: spc {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
mdio0_pins_active: mdio0_pins_active {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "mdio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
output-low;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
phy_active: phy_active {
|
||||
phy {
|
||||
pins = "gpio6", "gpio7";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1_pins {
|
||||
mux {
|
||||
pins = "gpio51", "gpio52";
|
||||
function = "gsbi1";
|
||||
drive-strength = <4>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi1 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_UART_W_FC>;
|
||||
|
||||
serial@12450000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x0 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi0: wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x10000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x0 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi1: wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x10000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x0 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi2: wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x10000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x2140000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "sbl1";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "mibib";
|
||||
reg = <0x40000 0x140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "sbl2";
|
||||
reg = <0x180000 0x140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2c0000 {
|
||||
label = "sbl3";
|
||||
reg = <0x2c0000 0x280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@540000 {
|
||||
label = "ddrconfig";
|
||||
reg = <0x540000 0x120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@660000 {
|
||||
label = "ssd";
|
||||
reg = <0x660000 0x120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@780000 {
|
||||
label = "tz";
|
||||
reg = <0x780000 0x280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
label = "rpm";
|
||||
reg = <0xa00000 0x280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fc0000 {
|
||||
label = "u-boot";
|
||||
reg = <0x1fc0000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@21c0000 {
|
||||
label = "bootkernel1";
|
||||
reg = <0x21c0000 0xa80000>;
|
||||
};
|
||||
|
||||
partition@2c40000 {
|
||||
label = "bootkernel2";
|
||||
reg = <0x2c40000 0xa80000>;
|
||||
};
|
||||
|
||||
partition@36c0000 {
|
||||
label = "ubi";
|
||||
reg = <0x36c0000 0x46c0000>;
|
||||
};
|
||||
|
||||
partition@7d80000 {
|
||||
label = "art";
|
||||
reg = <0x7d80000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
332
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
Executable file
332
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
Executable file
|
@ -0,0 +1,332 @@
|
|||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "Edgecore ECW5410";
|
||||
compatible = "edgecore,ecw5410", "qcom,ipq8064";
|
||||
|
||||
reserved-memory {
|
||||
nss@40000000 {
|
||||
reg = <0x40000000 0x1000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem: smem@41000000 {
|
||||
reg = <0x41000000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wifi_dump@44000000 {
|
||||
reg = <0x44000000 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
idle-states {
|
||||
CPU_SPC: spc {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial1 = &gsbi1_serial;
|
||||
ethernet0 = &gmac2;
|
||||
ethernet1 = &gmac3;
|
||||
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g_green {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g_yellow {
|
||||
label = "yellow:wlan2g";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g_green {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g_yellow {
|
||||
label = "yellow:wlan5g";
|
||||
gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&qcom_pinmux {
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio23", "gpio24", "gpio26",
|
||||
"gpio28", "gpio59";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1_pins {
|
||||
mux {
|
||||
pins = "gpio51", "gpio52", "gpio53", "gpio54";
|
||||
function = "gsbi1";
|
||||
drive-strength = <12>;
|
||||
bias-none;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi1 {
|
||||
qcom,mode = <GSBI_PROT_UART_W_FC>;
|
||||
status = "okay";
|
||||
|
||||
serial@12450000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "okay";
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hs_phy_0 { /* USB3 port 0 HS phy */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hs_phy_1 { /* USB3 port 1 HS phy */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ss_phy_0 { /* USB3 port 0 SS phy */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ss_phy_1 { /* USB3 port 1 SS phy */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
rootfs1@0 {
|
||||
label = "rootfs1";
|
||||
reg = <0x0000000 0x4000000>;
|
||||
};
|
||||
|
||||
rootfs2@4000000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x4000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <2>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
&gmac3 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <3>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
204
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
Executable file
204
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
Executable file
|
@ -0,0 +1,204 @@
|
|||
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||
|
||||
#include "qcom-ipq8068-cryptid-common.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Meraki MR42";
|
||||
compatible = "meraki,mr42", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
serial1 = &gsbi1_serial;
|
||||
ethernet0 = &gmac3;
|
||||
|
||||
led-boot = &led_active;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_active;
|
||||
led-upgrade = &led_active;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_power: power {
|
||||
label = "orange:power";
|
||||
gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_active: active {
|
||||
label = "white:active";
|
||||
gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac3 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <3>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy2>;
|
||||
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gsbi2 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
};
|
||||
|
||||
&gsbi2_i2c {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ina2xx@40 {
|
||||
compatible = "ina219";
|
||||
shunt-resistor = <40000>;
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
eeprom@56 {
|
||||
compatible = "atmel,24c64";
|
||||
pagesize = <32>;
|
||||
reg = <0x56>;
|
||||
read-only;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
mac_address: mac-address@66 {
|
||||
reg = <0x66 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi6 {
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gsbi6_i2c {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
tlc591xx@40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,tlc59108";
|
||||
reg = <0x40>;
|
||||
|
||||
red@0 {
|
||||
label = "red:user";
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
green@1 {
|
||||
label = "green:user";
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
blue@2 {
|
||||
label = "blue:user";
|
||||
reg = <0x2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy2: ethernet-phy2 {
|
||||
reg = <2>;
|
||||
|
||||
reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <24000>;
|
||||
|
||||
eee-broken-100tx;
|
||||
eee-broken-1000t;
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
i2c0_pins: i2c0_pins {
|
||||
mux {
|
||||
pins = "gpio24", "gpio25";
|
||||
function = "gsbi2";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio26";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1_pins {
|
||||
mux {
|
||||
pins = "gpio29", "gpio30";
|
||||
function = "gsbi6";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio31", "gpio32";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <2>;
|
||||
};
|
||||
|
||||
&wifi2 {
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <3>;
|
||||
};
|
230
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
Executable file
230
root/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
Executable file
|
@ -0,0 +1,230 @@
|
|||
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||
|
||||
#include "qcom-ipq8068-cryptid-common.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Meraki MR52";
|
||||
compatible = "meraki,mr52", "qcom,ipq8064";
|
||||
|
||||
aliases {
|
||||
serial1 = &gsbi1_serial;
|
||||
mdio-gpio0 = &mdio_gpio0;
|
||||
ethernet0 = &gmac2;
|
||||
ethernet1 = &gmac3;
|
||||
|
||||
led-boot = &led_active;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_active;
|
||||
led-upgrade = &led_active;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_power: power {
|
||||
label = "orange:power";
|
||||
gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan2_green {
|
||||
label = "green:lan2";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan1_green {
|
||||
label = "green:lan1";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_active: active {
|
||||
label = "white:active";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan2_orange {
|
||||
label = "orange:lan2";
|
||||
gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan1_orange {
|
||||
label = "orange:lan1";
|
||||
gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <2>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac3 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <3>;
|
||||
mdiobus = <&mdio_gpio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy4>;
|
||||
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&gsbi7 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
};
|
||||
|
||||
&gsbi7_i2c {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ina2xx@45 {
|
||||
compatible = "ina219";
|
||||
shunt-resistor = <80000>;
|
||||
reg = <0x45>;
|
||||
};
|
||||
|
||||
tlc591xx@49 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,tlc59108";
|
||||
reg = <0x49>;
|
||||
|
||||
red@0 {
|
||||
label = "red:user";
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
green@1 {
|
||||
label = "green:user";
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
blue@2 {
|
||||
label = "blue:user";
|
||||
reg = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c64";
|
||||
pagesize = <32>;
|
||||
reg = <0x52>;
|
||||
read-only;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
mac_address: mac-address@66 {
|
||||
reg = <0x66 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
i2c_pins: i2c_pins {
|
||||
mux {
|
||||
pins = "gpio8", "gpio9";
|
||||
function = "gsbi7";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio19", "gpio26";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
input;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
mdio_gpio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
|
||||
&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
phy0: ethernet-phy0 {
|
||||
reg = <0>;
|
||||
reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <24000>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy4 {
|
||||
reg = <4>;
|
||||
reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <24000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <4>;
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <3>;
|
||||
};
|
||||
|
||||
&wifi2 {
|
||||
nvmem-cells = <&mac_address>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <2>;
|
||||
};
|
1
root/target/linux/ipq806x/generic/target.mk
Executable file
1
root/target/linux/ipq806x/generic/target.mk
Executable file
|
@ -0,0 +1 @@
|
|||
BOARDNAME:=Generic
|
473
root/target/linux/ipq806x/image/Makefile
Executable file
473
root/target/linux/ipq806x/image/Makefile
Executable file
|
@ -0,0 +1,473 @@
|
|||
# Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/image.mk
|
||||
|
||||
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
||||
DEVICE_VARS += TPLINK_BOARD_ID
|
||||
|
||||
define Build/buffalo-rootfs-cksum
|
||||
( \
|
||||
echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
|
||||
$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
|
||||
) >> $@
|
||||
endef
|
||||
|
||||
define Build/edimax-header
|
||||
$(eval edimax_model=$(word 1,$(1)))
|
||||
|
||||
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
||||
-b -s CSYS -m $(edimax_model) \
|
||||
-f 0x70000 -S 0x1200000 \
|
||||
-i $@ -o $@.new
|
||||
@mv $@.new $@
|
||||
endef
|
||||
|
||||
define Device/Default
|
||||
PROFILES := Default
|
||||
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
||||
KERNEL_LOADADDR = 0x42208000
|
||||
DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
|
||||
DEVICE_DTS_CONFIG := config@1
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
||||
IMAGE/sysupgrade.bin/squashfs :=
|
||||
endef
|
||||
|
||||
define Device/LegacyImage
|
||||
KERNEL_SUFFIX := -uImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none
|
||||
KERNEL_NAME := zImage
|
||||
endef
|
||||
|
||||
define Device/FitImage
|
||||
KERNEL_SUFFIX := -fit-uImage.itb
|
||||
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
KERNEL_NAME := Image
|
||||
endef
|
||||
|
||||
define Device/FitImageLzma
|
||||
KERNEL_SUFFIX := -fit-uImage.itb
|
||||
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
KERNEL_NAME := Image
|
||||
endef
|
||||
|
||||
define Device/UbiFit
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES := nand-factory.bin nand-sysupgrade.bin
|
||||
IMAGE/nand-factory.bin := append-ubi
|
||||
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
define Device/DniImage
|
||||
KERNEL_SUFFIX := -uImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none
|
||||
KERNEL_NAME := zImage
|
||||
NETGEAR_BOARD_ID :=
|
||||
NETGEAR_HW_ID :=
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
|
||||
endef
|
||||
|
||||
define Device/TpSafeImage
|
||||
KERNEL_SUFFIX := -uImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none
|
||||
KERNEL_NAME := zImage
|
||||
TPLINK_BOARD_ID :=
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
|
||||
endef
|
||||
|
||||
define Device/ZyXELImage
|
||||
KERNEL_SUFFIX := -uImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
|
||||
KERNEL_NAME := zImage
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
|
||||
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
endef
|
||||
|
||||
define Device/askey_rt4230w-rev6
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := Askey
|
||||
DEVICE_MODEL := RT4230W
|
||||
DEVICE_VARIANT := REV6
|
||||
SOC := qcom-ipq8065
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
||||
KERNEL_IN_UBI := 1
|
||||
endef
|
||||
TARGET_DEVICES += askey_rt4230w-rev6
|
||||
|
||||
define Device/asrock_g10
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_VENDOR := ASRock
|
||||
DEVICE_MODEL := G10
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 5332k
|
||||
DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
|
||||
IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
|
||||
endef
|
||||
TARGET_DEVICES += asrock_g10
|
||||
|
||||
define Device/buffalo_wxr-2533dhp
|
||||
$(call Device/LegacyImage)
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_VENDOR := Buffalo
|
||||
DEVICE_MODEL := WXR-2533DHP
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 65536k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
|
||||
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wxr-2533dhp
|
||||
|
||||
define Device/compex_wpq864
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Compex
|
||||
DEVICE_MODEL := WPQ864
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_PACKAGES := kmod-gpio-beeper
|
||||
endef
|
||||
TARGET_DEVICES += compex_wpq864
|
||||
|
||||
define Device/edgecore_ecw5410
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Edgecore
|
||||
DEVICE_MODEL := ECW5410
|
||||
SOC := qcom-ipq8068
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@v2.0-ap160
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
|
||||
endef
|
||||
TARGET_DEVICES += edgecore_ecw5410
|
||||
|
||||
define Device/linksys_ea7500-v1
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := Linksys
|
||||
DEVICE_MODEL := EA7500
|
||||
DEVICE_VARIANT := v1
|
||||
SOC := qcom-ipq8064
|
||||
PAGESIZE := 2048
|
||||
BLOCKSIZE := 128k
|
||||
KERNEL_SIZE := 3072k
|
||||
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += linksys_ea7500-v1
|
||||
|
||||
define Device/linksys_ea8500
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := Linksys
|
||||
DEVICE_MODEL := EA8500
|
||||
SOC := qcom-ipq8064
|
||||
PAGESIZE := 2048
|
||||
BLOCKSIZE := 128k
|
||||
KERNEL_SIZE := 3072k
|
||||
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
|
||||
BOARD_NAME := ea8500
|
||||
SUPPORTED_DEVICES += ea8500
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += linksys_ea8500
|
||||
|
||||
define Device/meraki_mr42
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Cisco Meraki
|
||||
DEVICE_MODEL := MR42
|
||||
SOC := qcom-ipq8068
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_LOADADDR = 0x44208000
|
||||
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
||||
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
||||
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
||||
-uboot-envtools ath10k-firmware-qca9887-ct \
|
||||
ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
||||
kmod-leds-tlc591xx
|
||||
endef
|
||||
TARGET_DEVICES += meraki_mr42
|
||||
|
||||
define Device/meraki_mr52
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Cisco Meraki
|
||||
DEVICE_MODEL := MR52
|
||||
SOC := qcom-ipq8068
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_LOADADDR = 0x44208000
|
||||
DEVICE_DTS_CONFIG := config@2
|
||||
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
||||
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
||||
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
||||
-uboot-envtools ath10k-firmware-qca9887-ct \
|
||||
ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
||||
kmod-leds-tlc591xx
|
||||
endef
|
||||
TARGET_DEVICES += meraki_mr52
|
||||
|
||||
define Device/nec_wg2600hp
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := NEC
|
||||
DEVICE_MODEL := Aterm WG2600HP
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 64k
|
||||
BOARD_NAME := wg2600hp
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += nec_wg2600hp
|
||||
|
||||
define Device/nec_wg2600hp3
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := NEC Platforms
|
||||
DEVICE_MODEL := Aterm WG2600HP3
|
||||
SOC := qcom-ipq8062
|
||||
BLOCKSIZE := 64k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
|
||||
-kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
|
||||
ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
|
||||
endef
|
||||
TARGET_DEVICES += nec_wg2600hp3
|
||||
|
||||
define Device/netgear_d7800
|
||||
$(call Device/DniImage)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := Nighthawk X4 D7800
|
||||
SOC := qcom-ipq8064
|
||||
KERNEL_SIZE := 4096k
|
||||
NETGEAR_BOARD_ID := D7800
|
||||
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := d7800
|
||||
SUPPORTED_DEVICES += d7800
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_d7800
|
||||
|
||||
define Device/netgear_r7500
|
||||
$(call Device/DniImage)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := Nighthawk X4 R7500
|
||||
DEVICE_VARIANT := v1
|
||||
SOC := qcom-ipq8064
|
||||
KERNEL_SIZE := 4096k
|
||||
NETGEAR_BOARD_ID := R7500
|
||||
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := r7500
|
||||
SUPPORTED_DEVICES += r7500
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r7500
|
||||
|
||||
define Device/netgear_r7500v2
|
||||
$(call Device/DniImage)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := Nighthawk X4 R7500
|
||||
DEVICE_VARIANT := v2
|
||||
SOC := qcom-ipq8064
|
||||
KERNEL_SIZE := 4096k
|
||||
NETGEAR_BOARD_ID := R7500v2
|
||||
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := r7500v2
|
||||
SUPPORTED_DEVICES += r7500v2
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r7500v2
|
||||
|
||||
define Device/netgear_r7800
|
||||
$(call Device/DniImage)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := Nighthawk X4S R7800
|
||||
SOC := qcom-ipq8065
|
||||
KERNEL_SIZE := 4096k
|
||||
NETGEAR_BOARD_ID := R7800
|
||||
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := r7800
|
||||
SUPPORTED_DEVICES += r7800
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r7800
|
||||
|
||||
define Device/netgear_xr500
|
||||
$(call Device/DniImage)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := Nighthawk XR500
|
||||
SOC := qcom-ipq8065
|
||||
KERNEL_SIZE := 4096k
|
||||
NETGEAR_BOARD_ID := XR500
|
||||
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_xr500
|
||||
|
||||
define Device/qcom_ipq8064-ap148
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Qualcomm
|
||||
DEVICE_MODEL := AP148
|
||||
DEVICE_VARIANT := standard
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_DTS := qcom-ipq8064-ap148
|
||||
KERNEL_INSTALL := 1
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := ap148
|
||||
SUPPORTED_DEVICES += ap148
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += qcom_ipq8064-ap148
|
||||
|
||||
define Device/qcom_ipq8064-ap148-legacy
|
||||
$(call Device/LegacyImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Qualcomm
|
||||
DEVICE_MODEL := AP148
|
||||
DEVICE_VARIANT := legacy
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_DTS := qcom-ipq8064-ap148
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := ap148
|
||||
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
||||
|
||||
define Device/qcom_ipq8064-ap161
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Qualcomm
|
||||
DEVICE_MODEL := AP161
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_DTS := qcom-ipq8064-ap161
|
||||
KERNEL_INSTALL := 1
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := ap161
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += qcom_ipq8064-ap161
|
||||
|
||||
define Device/qcom_ipq8064-db149
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Qualcomm
|
||||
DEVICE_MODEL := DB149
|
||||
SOC := qcom-ipq8064
|
||||
DEVICE_DTS := qcom-ipq8064-db149
|
||||
KERNEL_INSTALL := 1
|
||||
BOARD_NAME := db149
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += qcom_ipq8064-db149
|
||||
|
||||
define Device/tplink_ad7200
|
||||
$(call Device/TpSafeImage)
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := AD7200
|
||||
DEVICE_VARIANT := v1/v2
|
||||
DEVICE_ALT0_VENDOR := TP-Link
|
||||
DEVICE_ALT0_MODEL := Talon AD7200
|
||||
DEVICE_ALT0_VARIANT := v1/v2
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
TPLINK_BOARD_ID := AD7200
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
|
||||
endef
|
||||
TARGET_DEVICES += tplink_ad7200
|
||||
|
||||
define Device/tplink_c2600
|
||||
$(call Device/TpSafeImage)
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := Archer C2600
|
||||
DEVICE_VARIANT := v1
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := c2600
|
||||
SUPPORTED_DEVICES += c2600
|
||||
TPLINK_BOARD_ID := C2600
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += tplink_c2600
|
||||
|
||||
define Device/tplink_vr2600v
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := Archer VR2600v
|
||||
DEVICE_VARIANT := v1
|
||||
KERNEL_SUFFIX := -uImage
|
||||
KERNEL = kernel-bin | append-dtb | uImage none
|
||||
KERNEL_NAME := zImage
|
||||
KERNEL_SIZE := 3072k
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := vr2600v
|
||||
SUPPORTED_DEVICES += vr2600v
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
||||
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += tplink_vr2600v
|
||||
|
||||
define Device/ubnt_unifi-ac-hd
|
||||
$(call Device/FitImageLzma)
|
||||
DEVICE_VENDOR := Ubiquiti
|
||||
DEVICE_MODEL := UniFi AC HD
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 64k
|
||||
IMAGE_SIZE := 14784k
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_unifi-ac-hd
|
||||
|
||||
define Device/zyxel_nbg6817
|
||||
DEVICE_VENDOR := ZyXEL
|
||||
DEVICE_MODEL := NBG6817
|
||||
SOC := qcom-ipq8065
|
||||
KERNEL_SIZE := 4096k
|
||||
BLOCKSIZE := 64k
|
||||
BOARD_NAME := nbg6817
|
||||
RAS_BOARD := NBG6817
|
||||
RAS_ROOTFS_SIZE := 20934k
|
||||
RAS_VERSION := "V1.99(OWRT.9999)C0"
|
||||
SUPPORTED_DEVICES += nbg6817
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
|
||||
$(call Device/ZyXELImage)
|
||||
endef
|
||||
TARGET_DEVICES += zyxel_nbg6817
|
||||
|
||||
$(eval $(call BuildImage))
|
16
root/target/linux/ipq806x/modules.mk
Executable file
16
root/target/linux/ipq806x/modules.mk
Executable file
|
@ -0,0 +1,16 @@
|
|||
define KernelPackage/phy-qcom-ipq806x-usb
|
||||
TITLE:=Qualcomm IPQ806x DWC3 USB PHY driver
|
||||
DEPENDS:=@TARGET_ipq806x
|
||||
KCONFIG:= CONFIG_PHY_QCOM_IPQ806X_USB
|
||||
FILES:= \
|
||||
$(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.ko
|
||||
AUTOLOAD:=$(call AutoLoad,45,phy-qcom-ipq806x-usb,1)
|
||||
$(call AddDepends/usb)
|
||||
endef
|
||||
|
||||
define KernelPackage/phy-qcom-ipq806x-usb/description
|
||||
This driver provides support for the integrated DesignWare
|
||||
USB3 IP Core within the QCOM SoCs.
|
||||
endef
|
||||
|
||||
$(eval $(call KernelPackage,phy-qcom-ipq806x-usb))
|
|
@ -33,7 +33,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
|||
|
||||
--- a/arch/arm/Kconfig
|
||||
+++ b/arch/arm/Kconfig
|
||||
@@ -321,7 +321,7 @@ config ARCH_MULTIPLATFORM
|
||||
@@ -322,7 +322,7 @@ config ARCH_MULTIPLATFORM
|
||||
select ARCH_SELECT_MEMORY_MODEL
|
||||
select ARM_HAS_SG_CHAIN
|
||||
select ARM_PATCH_PHYS_VIRT
|
|
@ -0,0 +1,21 @@
|
|||
From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <john@phrozen.org>
|
||||
Date: Thu, 9 Mar 2017 09:33:32 +0100
|
||||
Subject: [PATCH 65/69] arm: override compiler flags
|
||||
|
||||
Signed-off-by: John Crispin <john@phrozen.org>
|
||||
---
|
||||
arch/arm/Makefile | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm/Makefile
|
||||
+++ b/arch/arm/Makefile
|
||||
@@ -61,7 +61,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
|
||||
# macro, but instead defines a whole series of macros which makes
|
||||
# testing for a specific architecture or later rather impossible.
|
||||
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
|
||||
-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
|
||||
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
|
||||
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6
|
||||
# Only override the compiler option if ARMv6. The ARMv6K extensions are
|
||||
# always available in ARMv7
|
|
@ -22,7 +22,7 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
|
|||
|
||||
--- a/arch/arm/Kconfig
|
||||
+++ b/arch/arm/Kconfig
|
||||
@@ -1780,6 +1780,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
|
||||
@@ -1781,6 +1781,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
|
||||
The command-line arguments provided by the boot loader will be
|
||||
appended to the the device tree bootargs property.
|
||||
|
||||
|
@ -189,7 +189,7 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
|
|||
static int kernel_init(void *);
|
||||
|
||||
extern void init_IRQ(void);
|
||||
@@ -905,6 +909,18 @@ asmlinkage __visible void __init __no_sa
|
||||
@@ -906,6 +910,18 @@ asmlinkage __visible void __init __no_sa
|
||||
pr_notice("Kernel command line: %s\n", saved_command_line);
|
||||
/* parameters may set static keys */
|
||||
jump_label_init();
|
|
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -907,9 +907,27 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -907,8 +907,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-ipq4019-ap.dk04.1-c3.dtb \
|
||||
qcom-ipq4019-ap.dk07.1-c1.dtb \
|
||||
qcom-ipq4019-ap.dk07.1-c2.dtb \
|
||||
|
@ -33,8 +33,10 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|||
+ qcom-ipq8065-nbg6817.dtb \
|
||||
+ qcom-ipq8065-r7800.dtb \
|
||||
+ qcom-ipq8065-rt4230w-rev6.dtb \
|
||||
+ qcom-ipq8065-xr500.dtb \
|
||||
+ qcom-ipq8068-ecw5410.dtb \
|
||||
qcom-msm8226-samsung-s3ve3g.dtb \
|
||||
+ qcom-ipq8068-mr42.dtb \
|
||||
+ qcom-ipq8068-mr52.dtb \
|
||||
qcom-msm8660-surf.dtb \
|
||||
qcom-msm8960-cdp.dtb \
|
||||
qcom-msm8974-fairphone-fp2.dtb \
|
10
root/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch
Executable file
10
root/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch
Executable file
|
@ -0,0 +1,10 @@
|
|||
--- a/drivers/firmware/qcom_scm.c
|
||||
+++ b/drivers/firmware/qcom_scm.c
|
||||
@@ -1275,6 +1275,7 @@ static const struct of_device_id qcom_sc
|
||||
SCM_HAS_BUS_CLK)
|
||||
},
|
||||
{ .compatible = "qcom,scm-ipq4019" },
|
||||
+ { .compatible = "qcom,scm-ipq806x" },
|
||||
{ .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
|
||||
{ .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
|
||||
{ .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
|
220
root/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
Executable file
220
root/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
Executable file
|
@ -0,0 +1,220 @@
|
|||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -20,7 +20,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
- cpu@0 {
|
||||
+ cpu0: cpu@0 {
|
||||
compatible = "qcom,krait";
|
||||
enable-method = "qcom,kpss-acc-v1";
|
||||
device_type = "cpu";
|
||||
@@ -30,7 +30,7 @@
|
||||
qcom,saw = <&saw0>;
|
||||
};
|
||||
|
||||
- cpu@1 {
|
||||
+ cpu1: cpu@1 {
|
||||
compatible = "qcom,krait";
|
||||
enable-method = "qcom,kpss-acc-v1";
|
||||
device_type = "cpu";
|
||||
@@ -67,7 +67,7 @@
|
||||
no-map;
|
||||
};
|
||||
|
||||
- smem@41000000 {
|
||||
+ smem: smem@41000000 {
|
||||
reg = <0x41000000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
@@ -128,6 +128,7 @@
|
||||
gpio-ranges = <&qcom_pinmux 0 0 69>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
+ #address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -155,6 +156,7 @@
|
||||
function = "pcie3_rst";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
+ output-low;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -190,6 +192,7 @@
|
||||
intc: interrupt-controller@2000000 {
|
||||
compatible = "qcom,msm-qgic2";
|
||||
interrupt-controller;
|
||||
+ #address-cells = <0>;
|
||||
#interrupt-cells = <3>;
|
||||
reg = <0x02000000 0x1000>,
|
||||
<0x02002000 0x1000>;
|
||||
@@ -219,21 +222,23 @@
|
||||
acc0: clock-controller@2088000 {
|
||||
compatible = "qcom,kpss-acc-v1";
|
||||
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
||||
+ clock-output-names = "acpu0_aux";
|
||||
};
|
||||
|
||||
acc1: clock-controller@2098000 {
|
||||
compatible = "qcom,kpss-acc-v1";
|
||||
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
||||
+ clock-output-names = "acpu1_aux";
|
||||
};
|
||||
|
||||
saw0: regulator@2089000 {
|
||||
- compatible = "qcom,saw2";
|
||||
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
|
||||
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
||||
regulator;
|
||||
};
|
||||
|
||||
saw1: regulator@2099000 {
|
||||
- compatible = "qcom,saw2";
|
||||
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
|
||||
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
||||
regulator;
|
||||
};
|
||||
@@ -251,7 +256,7 @@
|
||||
|
||||
syscon-tcsr = <&tcsr>;
|
||||
|
||||
- serial@12490000 {
|
||||
+ gsbi2_serial: serial@12490000 {
|
||||
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||
reg = <0x12490000 0x1000>,
|
||||
<0x12480000 0x1000>;
|
||||
@@ -261,7 +266,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
- i2c@124a0000 {
|
||||
+ gsbi2_i2c: i2c@124a0000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
reg = <0x124a0000 0x1000>;
|
||||
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -326,7 +331,7 @@
|
||||
|
||||
syscon-tcsr = <&tcsr>;
|
||||
|
||||
- serial@1a240000 {
|
||||
+ gsbi5_serial: serial@1a240000 {
|
||||
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||
reg = <0x1a240000 0x1000>,
|
||||
<0x1a200000 0x1000>;
|
||||
@@ -397,7 +402,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
- sata@29000000 {
|
||||
+ sata: sata@29000000 {
|
||||
compatible = "qcom,ipq806x-ahci", "generic-ahci";
|
||||
reg = <0x29000000 0x180>;
|
||||
|
||||
@@ -430,13 +435,35 @@
|
||||
reg = <0x00700000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
+
|
||||
+ tsens_calib: calib@400 {
|
||||
+ reg = <0x400 0xb>;
|
||||
+ };
|
||||
+ tsens_backup: backup@410 {
|
||||
+ reg = <0x410 0xb>;
|
||||
+ };
|
||||
+ speedbin_efuse: speedbin@0c0 {
|
||||
+ reg = <0x0c0 0x4>;
|
||||
+ };
|
||||
};
|
||||
|
||||
gcc: clock-controller@900000 {
|
||||
- compatible = "qcom,gcc-ipq8064";
|
||||
+ compatible = "qcom,gcc-ipq8064", "syscon";
|
||||
reg = <0x00900000 0x4000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
+ #power-domain-cells = <1>;
|
||||
+
|
||||
+ tsens: thermal-sensor@900000 {
|
||||
+ compatible = "qcom,ipq8064-tsens";
|
||||
+
|
||||
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
|
||||
+ nvmem-cell-names = "calib", "calib_backup";
|
||||
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ interrupt-names = "uplow";
|
||||
+ #thermal-sensor-cells = <1>;
|
||||
+ #qcom,sensors = <11>;
|
||||
+ };
|
||||
};
|
||||
|
||||
tcsr: syscon@1a400000 {
|
||||
@@ -622,7 +649,7 @@
|
||||
|
||||
gmac0: ethernet@37000000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37000000 0x200000>;
|
||||
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -645,7 +672,7 @@
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37200000 0x200000>;
|
||||
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -668,7 +695,7 @@
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37400000 0x200000>;
|
||||
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -691,7 +718,7 @@
|
||||
|
||||
gmac3: ethernet@37600000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37600000 0x200000>;
|
||||
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -740,13 +767,13 @@
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
- amba {
|
||||
- compatible = "simple-bus";
|
||||
+ amba: amba {
|
||||
+ compatible = "arm,amba-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
- sdcc@12400000 {
|
||||
+ sdcc1: sdcc@12400000 {
|
||||
status = "disabled";
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
arm,primecell-periphid = <0x00051180>;
|
||||
@@ -760,13 +787,12 @@
|
||||
non-removable;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
- mmc-ddr-1_8v;
|
||||
vmmc-supply = <&vsdcc_fixed>;
|
||||
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
- sdcc@12180000 {
|
||||
+ sdcc3: sdcc@12180000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
arm,primecell-periphid = <0x00051180>;
|
||||
status = "disabled";
|
846
root/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
Executable file
846
root/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
Executable file
|
@ -0,0 +1,846 @@
|
|||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -8,6 +8,8 @@
|
||||
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
+#include <dt-bindings/mfd/qcom-rpm.h>
|
||||
+#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
@@ -28,6 +30,16 @@
|
||||
next-level-cache = <&L2>;
|
||||
qcom,acc = <&acc0>;
|
||||
qcom,saw = <&saw0>;
|
||||
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
|
||||
+ clock-names = "cpu", "l2";
|
||||
+ clock-latency = <100000>;
|
||||
+ cpu-supply = <&smb208_s2a>;
|
||||
+ operating-points-v2 = <&opp_table0>;
|
||||
+ voltage-tolerance = <5>;
|
||||
+ cooling-min-state = <0>;
|
||||
+ cooling-max-state = <10>;
|
||||
+ #cooling-cells = <2>;
|
||||
+ cpu-idle-states = <&CPU_SPC>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
@@ -38,14 +50,350 @@
|
||||
next-level-cache = <&L2>;
|
||||
qcom,acc = <&acc1>;
|
||||
qcom,saw = <&saw1>;
|
||||
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
|
||||
+ clock-names = "cpu", "l2";
|
||||
+ clock-latency = <100000>;
|
||||
+ cpu-supply = <&smb208_s2b>;
|
||||
+ operating-points-v2 = <&opp_table0>;
|
||||
+ voltage-tolerance = <5>;
|
||||
+ cooling-min-state = <0>;
|
||||
+ cooling-max-state = <10>;
|
||||
+ #cooling-cells = <2>;
|
||||
+ cpu-idle-states = <&CPU_SPC>;
|
||||
+ };
|
||||
+
|
||||
+ idle-states {
|
||||
+ CPU_SPC: spc {
|
||||
+ compatible = "qcom,idle-state-spc";
|
||||
+ status = "disabled";
|
||||
+ entry-latency-us = <400>;
|
||||
+ exit-latency-us = <900>;
|
||||
+ min-residency-us = <3000>;
|
||||
+ };
|
||||
};
|
||||
+ };
|
||||
|
||||
- L2: l2-cache {
|
||||
- compatible = "cache";
|
||||
- cache-level = <2>;
|
||||
+ opp_table_l2: opp_table_l2 {
|
||||
+ compatible = "operating-points-v2";
|
||||
+
|
||||
+ opp-384000000 {
|
||||
+ opp-hz = /bits/ 64 <384000000>;
|
||||
+ opp-microvolt = <1100000>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <0>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1000000000 {
|
||||
+ opp-hz = /bits/ 64 <1000000000>;
|
||||
+ opp-microvolt = <1100000>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1200000000 {
|
||||
+ opp-hz = /bits/ 64 <1200000000>;
|
||||
+ opp-microvolt = <1150000>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <2>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ opp_table0: opp_table0 {
|
||||
+ compatible = "operating-points-v2-kryo-cpu";
|
||||
+ nvmem-cells = <&speedbin_efuse>;
|
||||
+
|
||||
+ /*
|
||||
+ * Voltage thresholds are <target min max>
|
||||
+ */
|
||||
+ opp-384000000 {
|
||||
+ opp-hz = /bits/ 64 <384000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <0>;
|
||||
+ };
|
||||
+
|
||||
+ opp-600000000 {
|
||||
+ opp-hz = /bits/ 64 <600000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-800000000 {
|
||||
+ opp-hz = /bits/ 64 <800000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1000000000 {
|
||||
+ opp-hz = /bits/ 64 <1000000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1200000000 {
|
||||
+ opp-hz = /bits/ 64 <1200000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <2>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1400000000 {
|
||||
+ opp-hz = /bits/ 64 <1400000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
+ thermal-zones {
|
||||
+ tsens_tz_sensor0 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 0>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor1 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 1>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor2 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 2>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor3 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 3>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor4 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 4>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor5 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 5>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor6 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 6>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor7 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 7>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor8 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 8>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor9 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 9>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tsens_tz_sensor10 {
|
||||
+ polling-delay-passive = <0>;
|
||||
+ polling-delay = <0>;
|
||||
+ thermal-sensors = <&tsens 10>;
|
||||
+
|
||||
+ trips {
|
||||
+ cpu-critical {
|
||||
+ temperature = <105000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "critical";
|
||||
+ };
|
||||
+
|
||||
+ cpu-hot {
|
||||
+ temperature = <95000>;
|
||||
+ hysteresis = <2000>;
|
||||
+ type = "hot";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0>;
|
||||
@@ -93,6 +441,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ fab-scaling {
|
||||
+ compatible = "qcom,fab-scaling";
|
||||
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
|
||||
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
|
||||
+ fab_freq_high = <533000000>;
|
||||
+ fab_freq_nominal = <400000000>;
|
||||
+ cpu_freq_threshold = <1000000000>;
|
||||
+ };
|
||||
+
|
||||
firmware {
|
||||
scm {
|
||||
compatible = "qcom,scm-ipq806x", "qcom,scm";
|
||||
@@ -120,6 +477,78 @@
|
||||
reg-names = "lpass-lpaif";
|
||||
};
|
||||
|
||||
+ L2: l2-cache {
|
||||
+ compatible = "qcom,krait-cache", "cache";
|
||||
+ cache-level = <2>;
|
||||
+ qcom,saw = <&saw_l2>;
|
||||
+
|
||||
+ clocks = <&kraitcc 4>;
|
||||
+ clock-names = "l2";
|
||||
+ l2-supply = <&smb208_s1a>;
|
||||
+ operating-points-v2 = <&opp_table_l2>;
|
||||
+ };
|
||||
+
|
||||
+ rpm: rpm@108000 {
|
||||
+ compatible = "qcom,rpm-ipq8064";
|
||||
+ reg = <0x108000 0x1000>;
|
||||
+ qcom,ipc = <&l2cc 0x8 2>;
|
||||
+
|
||||
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
||||
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
|
||||
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ interrupt-names = "ack", "err", "wakeup";
|
||||
+
|
||||
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
|
||||
+ clock-names = "ram";
|
||||
+
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ rpmcc: clock-controller {
|
||||
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
|
||||
+ #clock-cells = <1>;
|
||||
+ };
|
||||
+
|
||||
+ regulators {
|
||||
+ compatible = "qcom,rpm-smb208-regulators";
|
||||
+
|
||||
+ smb208_s1a: s1a {
|
||||
+ regulator-min-microvolt = <1050000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+
|
||||
+ smb208_s1b: s1b {
|
||||
+ regulator-min-microvolt = <1050000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+
|
||||
+ smb208_s2a: s2a {
|
||||
+ regulator-min-microvolt = < 800000>;
|
||||
+ regulator-max-microvolt = <1250000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+
|
||||
+ smb208_s2b: s2b {
|
||||
+ regulator-min-microvolt = < 800000>;
|
||||
+ regulator-max-microvolt = <1250000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rng@1a500000 {
|
||||
+ compatible = "qcom,prng";
|
||||
+ reg = <0x1a500000 0x200>;
|
||||
+ clocks = <&gcc PRNG_CLK>;
|
||||
+ clock-names = "core";
|
||||
+ };
|
||||
+
|
||||
qcom_pinmux: pinmux@800000 {
|
||||
compatible = "qcom,ipq8064-pinctrl";
|
||||
reg = <0x800000 0x4000>;
|
||||
@@ -160,6 +589,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ i2c4_pins: i2c4_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio12", "gpio13";
|
||||
+ function = "gsbi4";
|
||||
+ drive-strength = <12>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
@@ -169,6 +607,53 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ nand_pins: nand_pins {
|
||||
+ disable {
|
||||
+ pins = "gpio34", "gpio35", "gpio36",
|
||||
+ "gpio37", "gpio38";
|
||||
+ function = "nand";
|
||||
+ drive-strength = <10>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+
|
||||
+ pullups {
|
||||
+ pins = "gpio39";
|
||||
+ function = "nand";
|
||||
+ drive-strength = <10>;
|
||||
+ bias-pull-up;
|
||||
+ };
|
||||
+
|
||||
+ hold {
|
||||
+ pins = "gpio40", "gpio41", "gpio42",
|
||||
+ "gpio43", "gpio44", "gpio45",
|
||||
+ "gpio46", "gpio47";
|
||||
+ function = "nand";
|
||||
+ drive-strength = <10>;
|
||||
+ bias-bus-hold;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ mdio0_pins: mdio0_pins {
|
||||
+ mux {
|
||||
+ pins = "gpio0", "gpio1";
|
||||
+ function = "mdio";
|
||||
+ drive-strength = <8>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rgmii2_pins: rgmii2_pins {
|
||||
+ mux {
|
||||
+ pins = "gpio27", "gpio28", "gpio29",
|
||||
+ "gpio30", "gpio31", "gpio32",
|
||||
+ "gpio51", "gpio52", "gpio59",
|
||||
+ "gpio60", "gpio61", "gpio62";
|
||||
+ function = "rgmii2";
|
||||
+ drive-strength = <8>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
leds_pins: leds_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9",
|
||||
@@ -231,6 +716,17 @@
|
||||
clock-output-names = "acpu1_aux";
|
||||
};
|
||||
|
||||
+ l2cc: clock-controller@2011000 {
|
||||
+ compatible = "qcom,kpss-gcc", "syscon";
|
||||
+ reg = <0x2011000 0x1000>;
|
||||
+ clock-output-names = "acpu_l2_aux";
|
||||
+ };
|
||||
+
|
||||
+ kraitcc: clock-controller {
|
||||
+ compatible = "qcom,krait-cc-v1";
|
||||
+ #clock-cells = <1>;
|
||||
+ };
|
||||
+
|
||||
saw0: regulator@2089000 {
|
||||
compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
|
||||
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
||||
@@ -243,6 +739,52 @@
|
||||
regulator;
|
||||
};
|
||||
|
||||
+ saw_l2: regulator@02012000 {
|
||||
+ compatible = "qcom,saw2", "syscon";
|
||||
+ reg = <0x02012000 0x1000>;
|
||||
+ regulator;
|
||||
+ };
|
||||
+
|
||||
+ sic_non_secure: sic-non-secure@12100000 {
|
||||
+ compatible = "syscon";
|
||||
+ reg = <0x12100000 0x10000>;
|
||||
+ };
|
||||
+
|
||||
+ gsbi1: gsbi@12440000 {
|
||||
+ compatible = "qcom,gsbi-v1.0.0";
|
||||
+ cell-index = <1>;
|
||||
+ reg = <0x12440000 0x100>;
|
||||
+ clocks = <&gcc GSBI1_H_CLK>;
|
||||
+ clock-names = "iface";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges;
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ syscon-tcsr = <&tcsr>;
|
||||
+
|
||||
+ gsbi1_serial: serial@12450000 {
|
||||
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||
+ reg = <0x12450000 0x100>,
|
||||
+ <0x12400000 0x03>;
|
||||
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ gsbi1_i2c: i2c@12460000 {
|
||||
+ compatible = "qcom,i2c-qup-v1.1.1";
|
||||
+ reg = <0x12460000 0x1000>;
|
||||
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
gsbi2: gsbi@12480000 {
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <2>;
|
||||
@@ -368,6 +910,33 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ gsbi6: gsbi@16500000 {
|
||||
+ status = "disabled";
|
||||
+ compatible = "qcom,gsbi-v1.0.0";
|
||||
+ cell-index = <6>;
|
||||
+ reg = <0x16500000 0x100>;
|
||||
+ clocks = <&gcc GSBI6_H_CLK>;
|
||||
+ clock-names = "iface";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges;
|
||||
+
|
||||
+ syscon-tcsr = <&tcsr>;
|
||||
+
|
||||
+ gsbi6_i2c: i2c@16580000 {
|
||||
+ compatible = "qcom,i2c-qup-v1.1.1";
|
||||
+ reg = <0x16580000 0x1000>;
|
||||
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+
|
||||
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
gsbi7: gsbi@16600000 {
|
||||
status = "disabled";
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
@@ -389,6 +958,19 @@
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
+
|
||||
+ gsbi7_i2c: i2c@16680000 {
|
||||
+ compatible = "qcom,i2c-qup-v1.1.1";
|
||||
+ reg = <0x16680000 0x1000>;
|
||||
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+
|
||||
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ };
|
||||
};
|
||||
|
||||
sata_phy: sata-phy@1b400000 {
|
||||
@@ -478,6 +1060,95 @@
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
+ sfpb_mutex_block: syscon@1200600 {
|
||||
+ compatible = "syscon";
|
||||
+ reg = <0x01200600 0x100>;
|
||||
+ };
|
||||
+
|
||||
+ hs_phy_0: hs_phy_0 {
|
||||
+ compatible = "qcom,ipq806x-usb-phy-hs";
|
||||
+ reg = <0x110f8800 0x30>;
|
||||
+ clocks = <&gcc USB30_0_UTMI_CLK>;
|
||||
+ clock-names = "ref";
|
||||
+ #phy-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ ss_phy_0: ss_phy_0 {
|
||||
+ compatible = "qcom,ipq806x-usb-phy-ss";
|
||||
+ reg = <0x110f8830 0x30>;
|
||||
+ clocks = <&gcc USB30_0_MASTER_CLK>;
|
||||
+ clock-names = "ref";
|
||||
+ #phy-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ usb3_0: usb3@110f8800 {
|
||||
+ compatible = "qcom,dwc3", "syscon";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ reg = <0x110f8800 0x8000>;
|
||||
+ clocks = <&gcc USB30_0_MASTER_CLK>;
|
||||
+ clock-names = "core";
|
||||
+
|
||||
+ ranges;
|
||||
+
|
||||
+ resets = <&gcc USB30_0_MASTER_RESET>;
|
||||
+ reset-names = "master";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ dwc3_0: dwc3@11000000 {
|
||||
+ compatible = "snps,dwc3";
|
||||
+ reg = <0x11000000 0xcd00>;
|
||||
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ phys = <&hs_phy_0>, <&ss_phy_0>;
|
||||
+ phy-names = "usb2-phy", "usb3-phy";
|
||||
+ dr_mode = "host";
|
||||
+ snps,dis_u3_susphy_quirk;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ hs_phy_1: hs_phy_1 {
|
||||
+ compatible = "qcom,ipq806x-usb-phy-hs";
|
||||
+ reg = <0x100f8800 0x30>;
|
||||
+ clocks = <&gcc USB30_1_UTMI_CLK>;
|
||||
+ clock-names = "ref";
|
||||
+ #phy-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ ss_phy_1: ss_phy_1 {
|
||||
+ compatible = "qcom,ipq806x-usb-phy-ss";
|
||||
+ reg = <0x100f8830 0x30>;
|
||||
+ clocks = <&gcc USB30_1_MASTER_CLK>;
|
||||
+ clock-names = "ref";
|
||||
+ #phy-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ usb3_1: usb3@100f8800 {
|
||||
+ compatible = "qcom,dwc3", "syscon";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ reg = <0x100f8800 0x8000>;
|
||||
+ clocks = <&gcc USB30_1_MASTER_CLK>;
|
||||
+ clock-names = "core";
|
||||
+
|
||||
+ ranges;
|
||||
+
|
||||
+ resets = <&gcc USB30_1_MASTER_RESET>;
|
||||
+ reset-names = "master";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ dwc3_1: dwc3@10000000 {
|
||||
+ compatible = "snps,dwc3";
|
||||
+ reg = <0x10000000 0xcd00>;
|
||||
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ phys = <&hs_phy_1>, <&ss_phy_1>;
|
||||
+ phy-names = "usb2-phy", "usb3-phy";
|
||||
+ dr_mode = "host";
|
||||
+ snps,dis_u3_susphy_quirk;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
pcie0: pci@1b500000 {
|
||||
compatible = "qcom,pcie-ipq8064";
|
||||
reg = <0x1b500000 0x1000
|
||||
@@ -739,6 +1410,59 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
+ adm_dma: dma@18300000 {
|
||||
+ compatible = "qcom,adm";
|
||||
+ reg = <0x18300000 0x100000>;
|
||||
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ #dma-cells = <1>;
|
||||
+
|
||||
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+
|
||||
+ resets = <&gcc ADM0_RESET>,
|
||||
+ <&gcc ADM0_PBUS_RESET>,
|
||||
+ <&gcc ADM0_C0_RESET>,
|
||||
+ <&gcc ADM0_C1_RESET>,
|
||||
+ <&gcc ADM0_C2_RESET>;
|
||||
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
|
||||
+ qcom,ee = <0>;
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ nand_controller: nand-controller@1ac00000 {
|
||||
+ compatible = "qcom,ipq806x-nand";
|
||||
+ reg = <0x1ac00000 0x800>;
|
||||
+
|
||||
+ clocks = <&gcc EBI2_CLK>,
|
||||
+ <&gcc EBI2_AON_CLK>;
|
||||
+ clock-names = "core", "aon";
|
||||
+
|
||||
+ dmas = <&adm_dma 3>;
|
||||
+ dma-names = "rxtx";
|
||||
+ qcom,cmd-crci = <15>;
|
||||
+ qcom,data-crci = <3>;
|
||||
+
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ mdio0: mdio@37000000 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ compatible = "qcom,ipq8064-mdio", "syscon";
|
||||
+ reg = <0x37000000 0x200000>;
|
||||
+ resets = <&gcc GMAC_CORE1_RESET>;
|
||||
+ reset-names = "stmmaceth";
|
||||
+ clocks = <&gcc GMAC_CORE1_CLK>;
|
||||
+ clock-names = "stmmaceth";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
vsdcc_fixed: vsdcc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "SDCC Power";
|
||||
@@ -814,4 +1538,17 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ sfpb_mutex: sfpb-mutex {
|
||||
+ compatible = "qcom,sfpb-mutex";
|
||||
+ syscon = <&sfpb_mutex_block 4 4>;
|
||||
+
|
||||
+ #hwlock-cells = <1>;
|
||||
+ };
|
||||
+
|
||||
+ smem {
|
||||
+ compatible = "qcom,smem";
|
||||
+ memory-region = <&smem>;
|
||||
+ hwlocks = <&sfpb_mutex 3>;
|
||||
+ };
|
||||
};
|
|
@ -4,7 +4,7 @@
|
|||
device_type = "memory";
|
||||
};
|
||||
|
||||
- mdio0: mdio@0 {
|
||||
- mdio0: mdio-0 {
|
||||
- status = "okay";
|
||||
- compatible = "virtual,mdio-gpio";
|
||||
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
|
||||
|
@ -71,7 +71,7 @@
|
|||
- };
|
||||
- };
|
||||
-
|
||||
mdio1: mdio@1 {
|
||||
mdio1: mdio-1 {
|
||||
status = "okay";
|
||||
compatible = "virtual,mdio-gpio";
|
||||
@@ -216,6 +149,68 @@
|
|
@ -69,7 +69,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
},
|
||||
},
|
||||
};
|
||||
@@ -1293,6 +1295,7 @@ static struct clk_rcg sdc1_src = {
|
||||
@@ -1424,6 +1426,7 @@ static struct clk_rcg tsif_ref_src = {
|
||||
.parent_names = gcc_pxo_pll8,
|
||||
.num_parents = 2,
|
||||
.ops = &clk_rcg_ops,
|
||||
|
@ -77,23 +77,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
},
|
||||
}
|
||||
};
|
||||
@@ -1341,6 +1344,7 @@ static struct clk_rcg sdc3_src = {
|
||||
.parent_names = gcc_pxo_pll8,
|
||||
.num_parents = 2,
|
||||
.ops = &clk_rcg_ops,
|
||||
+ .flags = CLK_SET_RATE_GATE,
|
||||
},
|
||||
}
|
||||
};
|
||||
@@ -1424,6 +1428,7 @@ static struct clk_rcg tsif_ref_src = {
|
||||
.parent_names = gcc_pxo_pll8,
|
||||
.num_parents = 2,
|
||||
.ops = &clk_rcg_ops,
|
||||
+ .flags = CLK_SET_RATE_GATE,
|
||||
},
|
||||
}
|
||||
};
|
||||
@@ -2694,7 +2699,8 @@ static struct clk_dyn_rcg ubi32_core1_sr
|
||||
@@ -2694,7 +2697,8 @@ static struct clk_dyn_rcg ubi32_core1_sr
|
||||
.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
|
||||
.num_parents = 5,
|
||||
.ops = &clk_dyn_rcg_ops,
|
||||
|
@ -103,7 +87,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
},
|
||||
},
|
||||
};
|
||||
@@ -2747,7 +2753,8 @@ static struct clk_dyn_rcg ubi32_core2_sr
|
||||
@@ -2747,7 +2751,8 @@ static struct clk_dyn_rcg ubi32_core2_sr
|
||||
.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
|
||||
.num_parents = 5,
|
||||
.ops = &clk_dyn_rcg_ops,
|
|
@ -107,7 +107,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
{ 64000000, P_PLL8, 3, 1, 2 },
|
||||
{ 96000000, P_PLL8, 4, 0, 0 },
|
||||
{ 192000000, P_PLL8, 2, 0, 0 },
|
||||
@@ -2647,7 +2703,9 @@ static const struct freq_tbl clk_tbl_nss
|
||||
@@ -2645,7 +2701,9 @@ static const struct freq_tbl clk_tbl_nss
|
||||
{ 110000000, P_PLL18, 1, 1, 5 },
|
||||
{ 275000000, P_PLL18, 2, 0, 0 },
|
||||
{ 550000000, P_PLL18, 1, 0, 0 },
|
||||
|
@ -117,7 +117,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
{ }
|
||||
};
|
||||
|
||||
@@ -2759,6 +2817,186 @@ static struct clk_dyn_rcg ubi32_core2_sr
|
||||
@@ -2757,6 +2815,186 @@ static struct clk_dyn_rcg ubi32_core2_sr
|
||||
},
|
||||
};
|
||||
|
||||
|
@ -304,7 +304,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
static struct clk_regmap *gcc_ipq806x_clks[] = {
|
||||
[PLL0] = &pll0.clkr,
|
||||
[PLL0_VOTE] = &pll0_vote,
|
||||
@@ -2766,6 +3004,7 @@ static struct clk_regmap *gcc_ipq806x_cl
|
||||
@@ -2764,6 +3002,7 @@ static struct clk_regmap *gcc_ipq806x_cl
|
||||
[PLL4_VOTE] = &pll4_vote,
|
||||
[PLL8] = &pll8.clkr,
|
||||
[PLL8_VOTE] = &pll8_vote,
|
||||
|
@ -312,7 +312,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
[PLL14] = &pll14.clkr,
|
||||
[PLL14_VOTE] = &pll14_vote,
|
||||
[PLL18] = &pll18.clkr,
|
||||
@@ -2880,6 +3119,12 @@ static struct clk_regmap *gcc_ipq806x_cl
|
||||
@@ -2878,6 +3117,12 @@ static struct clk_regmap *gcc_ipq806x_cl
|
||||
[PLL9] = &hfpll0.clkr,
|
||||
[PLL10] = &hfpll1.clkr,
|
||||
[PLL12] = &hfpll_l2.clkr,
|
||||
|
@ -325,7 +325,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
};
|
||||
|
||||
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
|
||||
@@ -3011,6 +3256,11 @@ static const struct qcom_reset_map gcc_i
|
||||
@@ -3009,6 +3254,11 @@ static const struct qcom_reset_map gcc_i
|
||||
[GMAC_CORE3_RESET] = { 0x3cfc, 0 },
|
||||
[GMAC_CORE4_RESET] = { 0x3d1c, 0 },
|
||||
[GMAC_AHB_RESET] = { 0x3e24, 0 },
|
|
@ -0,0 +1,681 @@
|
|||
From cc41a266280cad0b55319e614167c88dff344248 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Sat, 22 Feb 2020 16:33:10 +0100
|
||||
Subject: [PATCH 1/8] cpufreq: add Krait dedicated scaling driver
|
||||
|
||||
This new driver is based on generic cpufreq-dt driver.
|
||||
Krait SoCs have 2-4 cpu and one shared L2 cache that can
|
||||
operate at different frequency based on the maximum cpu clk
|
||||
across all core.
|
||||
L2 frequency and voltage are scaled on every frequency change
|
||||
if needed. On Krait SoCs is present a bug that can cause
|
||||
transition problem between frequency bin, to workaround this
|
||||
on more than one transition, the L2 frequency is first set to the
|
||||
base rate and then to the target rate.
|
||||
The L2 frequency use the OPP framework and use the opp-level
|
||||
bindings to link the l2 freq to different cpu freq. This is needed
|
||||
as the Krait l2 clk are note mapped 1:1 to the core clks and some
|
||||
of the l2 clk is set based on a range of the cpu clks. If the driver
|
||||
find a broken config (for example no opp-level set) the l2 scaling is
|
||||
skipped.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
---
|
||||
drivers/cpufreq/Kconfig.arm | 14 +-
|
||||
drivers/cpufreq/Makefile | 2 +
|
||||
drivers/cpufreq/qcom-cpufreq-krait.c | 589 +++++++++++++++++++++++++++
|
||||
3 files changed, 604 insertions(+), 1 deletion(-)
|
||||
create mode 100644 drivers/cpufreq/qcom-cpufreq-krait.c
|
||||
|
||||
--- a/drivers/cpufreq/Kconfig.arm
|
||||
+++ b/drivers/cpufreq/Kconfig.arm
|
||||
@@ -150,6 +150,18 @@ config ARM_QCOM_CPUFREQ_HW
|
||||
The driver implements the cpufreq interface for this HW engine.
|
||||
Say Y if you want to support CPUFreq HW.
|
||||
|
||||
+config ARM_QCOM_CPUFREQ_KRAIT
|
||||
+ tristate "CPU Frequency scaling support for Krait SoCs"
|
||||
+ depends on ARCH_QCOM || COMPILE_TEST
|
||||
+ select PM_OPP
|
||||
+ select ARM_QCOM_CPUFREQ_NVMEM
|
||||
+ help
|
||||
+ This adds the CPUFreq driver for Qualcomm Krait SoC based boards.
|
||||
+ This scale the cache clk and regulator based on the different cpu
|
||||
+ clks when scaling the different cores clk.
|
||||
+
|
||||
+ If in doubt, say N.
|
||||
+
|
||||
config ARM_RASPBERRYPI_CPUFREQ
|
||||
tristate "Raspberry Pi cpufreq support"
|
||||
depends on CLK_RASPBERRYPI || COMPILE_TEST
|
||||
@@ -339,4 +351,4 @@ config ARM_PXA2xx_CPUFREQ
|
||||
help
|
||||
This add the CPUFreq driver support for Intel PXA2xx SOCs.
|
||||
|
||||
- If in doubt, say N.
|
||||
+ If in doubt, say N.
|
||||
\ No newline at end of file
|
||||
--- a/drivers/cpufreq/Makefile
|
||||
+++ b/drivers/cpufreq/Makefile
|
||||
@@ -63,6 +63,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2
|
||||
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
|
||||
obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
|
||||
obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
|
||||
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRAIT) += qcom-cpufreq-krait.o
|
||||
obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
|
||||
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
|
||||
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
|
||||
@@ -86,6 +87,7 @@ obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += te
|
||||
obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o
|
||||
obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
|
||||
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
|
||||
+obj-$(CONFIG_ARM_KRAIT_CPUFREQ) += krait-cpufreq.o
|
||||
|
||||
|
||||
##################################################################################
|
||||
--- /dev/null
|
||||
+++ b/drivers/cpufreq/qcom-cpufreq-krait.c
|
||||
@@ -0,0 +1,603 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0
|
||||
+
|
||||
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/cpu.h>
|
||||
+#include <linux/cpufreq.h>
|
||||
+#include <linux/cpumask.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_device.h>
|
||||
+#include <linux/pm_opp.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/regulator/consumer.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/thermal.h>
|
||||
+
|
||||
+#include "cpufreq-dt.h"
|
||||
+
|
||||
+static struct platform_device *l2_pdev;
|
||||
+
|
||||
+struct private_data {
|
||||
+ struct opp_table *opp_table;
|
||||
+ struct device *cpu_dev;
|
||||
+ const char *reg_name;
|
||||
+ bool have_static_opps;
|
||||
+};
|
||||
+
|
||||
+static int set_target(struct cpufreq_policy *policy, unsigned int index)
|
||||
+{
|
||||
+ struct private_data *priv = policy->driver_data;
|
||||
+ unsigned long freq = policy->freq_table[index].frequency;
|
||||
+ unsigned long target_freq = freq * 1000;
|
||||
+ struct dev_pm_opp *opp;
|
||||
+ unsigned int level;
|
||||
+ int cpu, ret;
|
||||
+
|
||||
+ if (l2_pdev) {
|
||||
+ int policy_cpu = policy->cpu;
|
||||
+
|
||||
+ /* find the max freq across all core */
|
||||
+ for_each_present_cpu(cpu)
|
||||
+ if (cpu != policy_cpu)
|
||||
+ target_freq = max(
|
||||
+ target_freq,
|
||||
+ (unsigned long)cpufreq_quick_get(cpu));
|
||||
+
|
||||
+ opp = dev_pm_opp_find_freq_exact(priv->cpu_dev, target_freq,
|
||||
+ true);
|
||||
+ if (IS_ERR(opp)) {
|
||||
+ dev_err(&l2_pdev->dev, "failed to find OPP for %ld\n",
|
||||
+ target_freq);
|
||||
+ return PTR_ERR(opp);
|
||||
+ }
|
||||
+ level = dev_pm_opp_get_level(opp);
|
||||
+ dev_pm_opp_put(opp);
|
||||
+
|
||||
+ /*
|
||||
+ * Hardware constraint:
|
||||
+ * Krait CPU cannot operate at 384MHz with L2 at 1Ghz.
|
||||
+ * Assume index 0 with the idle freq and level > 0 as
|
||||
+ * any L2 freq > 384MHz.
|
||||
+ * Skip CPU freq change in this corner case.
|
||||
+ */
|
||||
+ if (unlikely(index == 0 && level != 0)) {
|
||||
+ dev_err(priv->cpu_dev, "Krait CPU can't operate at idle freq with L2 at 1GHz");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ opp = dev_pm_opp_find_level_exact(&l2_pdev->dev, level);
|
||||
+ if (IS_ERR(opp)) {
|
||||
+ dev_err(&l2_pdev->dev,
|
||||
+ "failed to find level OPP for %d\n", level);
|
||||
+ return PTR_ERR(opp);
|
||||
+ }
|
||||
+ target_freq = dev_pm_opp_get_freq(opp);
|
||||
+ dev_pm_opp_put(opp);
|
||||
+
|
||||
+ ret = dev_pm_opp_set_rate(&l2_pdev->dev, target_freq);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ arch_set_freq_scale(policy->related_cpus, freq,
|
||||
+ policy->cpuinfo.max_freq);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+/*
|
||||
+ * An earlier version of opp-v1 bindings used to name the regulator
|
||||
+ * "cpu0-supply", we still need to handle that for backwards compatibility.
|
||||
+ */
|
||||
+static const char *find_supply_name(struct device *dev)
|
||||
+{
|
||||
+ struct device_node *np;
|
||||
+ struct property *pp;
|
||||
+ int cpu = dev->id;
|
||||
+ const char *name = NULL;
|
||||
+
|
||||
+ np = of_node_get(dev->of_node);
|
||||
+
|
||||
+ /* This must be valid for sure */
|
||||
+ if (WARN_ON(!np))
|
||||
+ return NULL;
|
||||
+
|
||||
+ /* Try "cpu0" for older DTs */
|
||||
+ if (!cpu) {
|
||||
+ pp = of_find_property(np, "cpu0-supply", NULL);
|
||||
+ if (pp) {
|
||||
+ name = "cpu0";
|
||||
+ goto node_put;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ pp = of_find_property(np, "cpu-supply", NULL);
|
||||
+ if (pp) {
|
||||
+ name = "cpu";
|
||||
+ goto node_put;
|
||||
+ }
|
||||
+
|
||||
+ dev_dbg(dev, "no regulator for cpu%d\n", cpu);
|
||||
+node_put:
|
||||
+ of_node_put(np);
|
||||
+ return name;
|
||||
+}
|
||||
+
|
||||
+static int resources_available(void)
|
||||
+{
|
||||
+ struct device *cpu_dev;
|
||||
+ struct regulator *cpu_reg;
|
||||
+ struct clk *cpu_clk;
|
||||
+ int ret = 0;
|
||||
+ const char *name;
|
||||
+
|
||||
+ cpu_dev = get_cpu_device(0);
|
||||
+ if (!cpu_dev) {
|
||||
+ pr_err("failed to get cpu0 device\n");
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+
|
||||
+ cpu_clk = clk_get(cpu_dev, NULL);
|
||||
+ ret = PTR_ERR_OR_ZERO(cpu_clk);
|
||||
+ if (ret) {
|
||||
+ /*
|
||||
+ * If cpu's clk node is present, but clock is not yet
|
||||
+ * registered, we should try defering probe.
|
||||
+ */
|
||||
+ if (ret == -EPROBE_DEFER)
|
||||
+ dev_dbg(cpu_dev, "clock not ready, retry\n");
|
||||
+ else
|
||||
+ dev_err(cpu_dev, "failed to get clock: %d\n", ret);
|
||||
+
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ clk_put(cpu_clk);
|
||||
+
|
||||
+ name = find_supply_name(cpu_dev);
|
||||
+ /* Platform doesn't require regulator */
|
||||
+ if (!name)
|
||||
+ return 0;
|
||||
+
|
||||
+ cpu_reg = regulator_get_optional(cpu_dev, name);
|
||||
+ ret = PTR_ERR_OR_ZERO(cpu_reg);
|
||||
+ if (ret) {
|
||||
+ /*
|
||||
+ * If cpu's regulator supply node is present, but regulator is
|
||||
+ * not yet registered, we should try defering probe.
|
||||
+ */
|
||||
+ if (ret == -EPROBE_DEFER)
|
||||
+ dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
|
||||
+ else
|
||||
+ dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
|
||||
+
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ regulator_put(cpu_reg);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int cpufreq_init(struct cpufreq_policy *policy)
|
||||
+{
|
||||
+ struct cpufreq_frequency_table *freq_table;
|
||||
+ struct opp_table *opp_table = NULL;
|
||||
+ unsigned int transition_latency;
|
||||
+ struct private_data *priv;
|
||||
+ struct device *cpu_dev;
|
||||
+ bool fallback = false;
|
||||
+ struct clk *cpu_clk;
|
||||
+ const char *name;
|
||||
+ int ret;
|
||||
+
|
||||
+ cpu_dev = get_cpu_device(policy->cpu);
|
||||
+ if (!cpu_dev) {
|
||||
+ pr_err("failed to get cpu%d device\n", policy->cpu);
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+
|
||||
+ cpu_clk = clk_get(cpu_dev, NULL);
|
||||
+ if (IS_ERR(cpu_clk)) {
|
||||
+ ret = PTR_ERR(cpu_clk);
|
||||
+ dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ /* Get OPP-sharing information from "operating-points-v2" bindings */
|
||||
+ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
|
||||
+ if (ret) {
|
||||
+ if (ret != -ENOENT)
|
||||
+ goto out_put_clk;
|
||||
+
|
||||
+ /*
|
||||
+ * operating-points-v2 not supported, fallback to old method of
|
||||
+ * finding shared-OPPs for backward compatibility if the
|
||||
+ * platform hasn't set sharing CPUs.
|
||||
+ */
|
||||
+ if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
|
||||
+ fallback = true;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * OPP layer will be taking care of regulators now, but it needs to know
|
||||
+ * the name of the regulator first.
|
||||
+ */
|
||||
+ name = find_supply_name(cpu_dev);
|
||||
+ if (name) {
|
||||
+ opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
|
||||
+ if (IS_ERR(opp_table)) {
|
||||
+ ret = PTR_ERR(opp_table);
|
||||
+ dev_err(cpu_dev,
|
||||
+ "Failed to set regulator for cpu%d: %d\n",
|
||||
+ policy->cpu, ret);
|
||||
+ goto out_put_clk;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
||||
+ if (!priv) {
|
||||
+ ret = -ENOMEM;
|
||||
+ goto out_put_regulator;
|
||||
+ }
|
||||
+
|
||||
+ priv->reg_name = name;
|
||||
+ priv->opp_table = opp_table;
|
||||
+
|
||||
+ /*
|
||||
+ * Initialize OPP tables for all policy->cpus. They will be shared by
|
||||
+ * all CPUs which have marked their CPUs shared with OPP bindings.
|
||||
+ *
|
||||
+ * For platforms not using operating-points-v2 bindings, we do this
|
||||
+ * before updating policy->cpus. Otherwise, we will end up creating
|
||||
+ * duplicate OPPs for policy->cpus.
|
||||
+ *
|
||||
+ * OPPs might be populated at runtime, don't check for error here
|
||||
+ */
|
||||
+ if (!dev_pm_opp_of_cpumask_add_table(policy->cpus))
|
||||
+ priv->have_static_opps = true;
|
||||
+
|
||||
+ /*
|
||||
+ * But we need OPP table to function so if it is not there let's
|
||||
+ * give platform code chance to provide it for us.
|
||||
+ */
|
||||
+ ret = dev_pm_opp_get_opp_count(cpu_dev);
|
||||
+ if (ret <= 0) {
|
||||
+ dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
|
||||
+ ret = -EPROBE_DEFER;
|
||||
+ goto out_free_opp;
|
||||
+ }
|
||||
+
|
||||
+ if (fallback) {
|
||||
+ cpumask_setall(policy->cpus);
|
||||
+
|
||||
+ /*
|
||||
+ * OPP tables are initialized only for policy->cpu, do it for
|
||||
+ * others as well.
|
||||
+ */
|
||||
+ ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
|
||||
+ if (ret)
|
||||
+ dev_err(cpu_dev,
|
||||
+ "%s: failed to mark OPPs as shared: %d\n",
|
||||
+ __func__, ret);
|
||||
+ }
|
||||
+
|
||||
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
|
||||
+ if (ret) {
|
||||
+ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
|
||||
+ goto out_free_opp;
|
||||
+ }
|
||||
+
|
||||
+ priv->cpu_dev = cpu_dev;
|
||||
+
|
||||
+ policy->driver_data = priv;
|
||||
+ policy->clk = cpu_clk;
|
||||
+ policy->freq_table = freq_table;
|
||||
+
|
||||
+ policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
|
||||
+
|
||||
+ transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
|
||||
+ if (!transition_latency)
|
||||
+ transition_latency = CPUFREQ_ETERNAL;
|
||||
+
|
||||
+ policy->cpuinfo.transition_latency = transition_latency;
|
||||
+ policy->dvfs_possible_from_any_cpu = true;
|
||||
+
|
||||
+ dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+out_free_opp:
|
||||
+ if (priv->have_static_opps)
|
||||
+ dev_pm_opp_of_cpumask_remove_table(policy->cpus);
|
||||
+ kfree(priv);
|
||||
+out_put_regulator:
|
||||
+ if (name)
|
||||
+ dev_pm_opp_put_regulators(opp_table);
|
||||
+out_put_clk:
|
||||
+ clk_put(cpu_clk);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int cpufreq_online(struct cpufreq_policy *policy)
|
||||
+{
|
||||
+ /* We did light-weight tear down earlier, nothing to do here */
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int cpufreq_offline(struct cpufreq_policy *policy)
|
||||
+{
|
||||
+ /*
|
||||
+ * Preserve policy->driver_data and don't free resources on light-weight
|
||||
+ * tear down.
|
||||
+ */
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int cpufreq_exit(struct cpufreq_policy *policy)
|
||||
+{
|
||||
+ struct private_data *priv = policy->driver_data;
|
||||
+
|
||||
+ dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
|
||||
+ if (priv->have_static_opps)
|
||||
+ dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
|
||||
+ if (priv->reg_name)
|
||||
+ dev_pm_opp_put_regulators(priv->opp_table);
|
||||
+
|
||||
+ clk_put(policy->clk);
|
||||
+ kfree(priv);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct cpufreq_driver krait_cpufreq_driver = {
|
||||
+ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
|
||||
+ CPUFREQ_IS_COOLING_DEV,
|
||||
+ .verify = cpufreq_generic_frequency_table_verify,
|
||||
+ .target_index = set_target,
|
||||
+ .get = cpufreq_generic_get,
|
||||
+ .init = cpufreq_init,
|
||||
+ .exit = cpufreq_exit,
|
||||
+ .online = cpufreq_online,
|
||||
+ .offline = cpufreq_offline,
|
||||
+ .name = "krait-cpufreq",
|
||||
+ .suspend = cpufreq_generic_suspend,
|
||||
+};
|
||||
+
|
||||
+struct krait_data {
|
||||
+ unsigned long idle_freq;
|
||||
+ bool regulator_enabled;
|
||||
+};
|
||||
+
|
||||
+static int krait_cache_set_opp(struct dev_pm_set_opp_data *data)
|
||||
+{
|
||||
+ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
|
||||
+ struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0];
|
||||
+ struct regulator *reg = data->regulators[0];
|
||||
+ struct clk *clk = data->clk;
|
||||
+ struct krait_data *kdata;
|
||||
+ unsigned long idle_freq;
|
||||
+ int ret;
|
||||
+
|
||||
+ kdata = (struct krait_data *)dev_get_drvdata(data->dev);
|
||||
+ idle_freq = kdata->idle_freq;
|
||||
+
|
||||
+ /* Scaling up? Scale voltage before frequency */
|
||||
+ if (freq >= old_freq) {
|
||||
+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
|
||||
+ supply->u_volt,
|
||||
+ supply->u_volt_max);
|
||||
+ if (ret)
|
||||
+ goto exit;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Set to idle bin if switching from normal to high bin
|
||||
+ * or vice versa. It has been notice that a bug is triggered
|
||||
+ * in cache scaling when more than one bin is scaled, to fix
|
||||
+ * this we first need to transition to the base rate and then
|
||||
+ * to target rate
|
||||
+ */
|
||||
+ if (likely(freq != idle_freq && old_freq != idle_freq)) {
|
||||
+ ret = clk_set_rate(clk, idle_freq);
|
||||
+ if (ret)
|
||||
+ goto exit;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_set_rate(clk, freq);
|
||||
+ if (ret)
|
||||
+ goto exit;
|
||||
+
|
||||
+ /* Scaling down? Scale voltage after frequency */
|
||||
+ if (freq < old_freq) {
|
||||
+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
|
||||
+ supply->u_volt,
|
||||
+ supply->u_volt_max);
|
||||
+ }
|
||||
+
|
||||
+ if (unlikely(!kdata->regulator_enabled)) {
|
||||
+ ret = regulator_enable(reg);
|
||||
+ if (ret < 0)
|
||||
+ dev_warn(data->dev, "Failed to enable regulator: %d", ret);
|
||||
+ else
|
||||
+ kdata->regulator_enabled = true;
|
||||
+ }
|
||||
+
|
||||
+exit:
|
||||
+ return ret;
|
||||
+};
|
||||
+
|
||||
+static int krait_cache_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ struct krait_data *data;
|
||||
+ struct opp_table *table;
|
||||
+ struct dev_pm_opp *opp;
|
||||
+ struct device *cpu_dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
||||
+ if (!data)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1);
|
||||
+ if (IS_ERR(table)) {
|
||||
+ ret = PTR_ERR(table);
|
||||
+ if (ret != -EPROBE_DEFER)
|
||||
+ dev_err(dev, "failed to set regulators %d\n", ret);
|
||||
+
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = PTR_ERR_OR_ZERO(
|
||||
+ dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp));
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = dev_pm_opp_of_add_table(dev);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "failed to parse L2 freq thresholds\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq);
|
||||
+ dev_pm_opp_put(opp);
|
||||
+
|
||||
+ /*
|
||||
+ * Check opp-level configuration
|
||||
+ * At least 2 level must be set or the cache will always be scaled
|
||||
+ * the idle freq causing some performance problem
|
||||
+ *
|
||||
+ * In case of invalid configuration, the l2 scaling is skipped
|
||||
+ */
|
||||
+ cpu_dev = get_cpu_device(0);
|
||||
+ if (!cpu_dev) {
|
||||
+ pr_err("failed to get cpu0 device\n");
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Check if we have at least opp-level 1, 0 should always be set to
|
||||
+ * the idle freq
|
||||
+ */
|
||||
+ opp = dev_pm_opp_find_level_exact(dev, 1);
|
||||
+ if (IS_ERR(opp)) {
|
||||
+ dev_err(dev,
|
||||
+ "Invalid configuration found of l2 opp. Can't find opp-level 1");
|
||||
+ goto invalid_conf;
|
||||
+ }
|
||||
+ dev_pm_opp_put(opp);
|
||||
+
|
||||
+ /*
|
||||
+ * Check if we have at least opp-level 1 in the cpu opp, 0 should always
|
||||
+ * be set to the idle freq
|
||||
+ */
|
||||
+ opp = dev_pm_opp_find_level_exact(cpu_dev, 1);
|
||||
+ if (IS_ERR(opp)) {
|
||||
+ dev_err(dev,
|
||||
+ "Invalid configuration found of cpu opp. Can't find opp-level 1");
|
||||
+ goto invalid_conf;
|
||||
+ }
|
||||
+ dev_pm_opp_put(opp);
|
||||
+
|
||||
+ platform_set_drvdata(pdev, data);
|
||||
+
|
||||
+ /* The l2 scaling is enabled by linking the cpufreq driver */
|
||||
+ l2_pdev = pdev;
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+invalid_conf:
|
||||
+ dev_pm_opp_remove_table(dev);
|
||||
+ dev_pm_opp_put_regulators(table);
|
||||
+ dev_pm_opp_unregister_set_opp_helper(table);
|
||||
+
|
||||
+ return -EINVAL;
|
||||
+};
|
||||
+
|
||||
+static int krait_cache_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ struct opp_table *table = dev_pm_opp_get_opp_table(dev);
|
||||
+
|
||||
+ dev_pm_opp_remove_table(dev);
|
||||
+ dev_pm_opp_put_regulators(table);
|
||||
+ dev_pm_opp_unregister_set_opp_helper(table);
|
||||
+
|
||||
+ return 0;
|
||||
+};
|
||||
+
|
||||
+static const struct of_device_id krait_cache_match_table[] = {
|
||||
+ { .compatible = "qcom,krait-cache" },
|
||||
+ {}
|
||||
+};
|
||||
+
|
||||
+static struct platform_driver krait_cache_driver = {
|
||||
+ .driver = {
|
||||
+ .name = "krait-cache",
|
||||
+ .of_match_table = krait_cache_match_table,
|
||||
+ },
|
||||
+ .probe = krait_cache_probe,
|
||||
+ .remove = krait_cache_remove,
|
||||
+};
|
||||
+module_platform_driver(krait_cache_driver);
|
||||
+
|
||||
+static int krait_cpufreq_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
|
||||
+ int ret;
|
||||
+
|
||||
+ /*
|
||||
+ * All per-cluster (CPUs sharing clock/voltages) initialization is done
|
||||
+ * from ->init(). In probe(), we just need to make sure that clk and
|
||||
+ * regulators are available. Else defer probe and retry.
|
||||
+ *
|
||||
+ * FIXME: Is checking this only for CPU0 sufficient ?
|
||||
+ */
|
||||
+ ret = resources_available();
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ if (data) {
|
||||
+ if (data->have_governor_per_policy)
|
||||
+ krait_cpufreq_driver.flags |=
|
||||
+ CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
|
||||
+
|
||||
+ krait_cpufreq_driver.resume = data->resume;
|
||||
+ if (data->suspend)
|
||||
+ krait_cpufreq_driver.suspend = data->suspend;
|
||||
+ }
|
||||
+
|
||||
+ ret = cpufreq_register_driver(&krait_cpufreq_driver);
|
||||
+ if (ret)
|
||||
+ dev_err(&pdev->dev, "failed register driver: %d\n", ret);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int krait_cpufreq_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ cpufreq_unregister_driver(&krait_cpufreq_driver);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver krait_cpufreq_platdrv = {
|
||||
+ .driver = {
|
||||
+ .name = "krait-cpufreq",
|
||||
+ },
|
||||
+ .probe = krait_cpufreq_probe,
|
||||
+ .remove = krait_cpufreq_remove,
|
||||
+};
|
||||
+module_platform_driver(krait_cpufreq_platdrv);
|
||||
+
|
||||
+MODULE_ALIAS("platform:krait-cpufreq");
|
||||
+MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
|
||||
+MODULE_DESCRIPTION("Dedicated Krait SoC cpufreq driver");
|
||||
+MODULE_LICENSE("GPL");
|
|
@ -0,0 +1,243 @@
|
|||
--- a/drivers/clk/qcom/Makefile
|
||||
+++ b/drivers/clk/qcom/Makefile
|
||||
@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k
|
||||
clk-qcom-y += clk-hfpll.o
|
||||
clk-qcom-y += reset.o
|
||||
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
|
||||
+clk-qcom-y += fab_scaling.o
|
||||
|
||||
# Keep alphabetically sorted by config
|
||||
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/fab_scaling.c
|
||||
@@ -0,0 +1,172 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * Permission to use, copy, modify, and/or distribute this software for any
|
||||
+ * purpose with or without fee is hereby granted, provided that the above
|
||||
+ * copyright notice and this permission notice appear in all copies.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_device.h>
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/clk-provider.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/fab_scaling.h>
|
||||
+
|
||||
+struct qcom_fab_scaling_data {
|
||||
+ u32 fab_freq_high;
|
||||
+ u32 fab_freq_nominal;
|
||||
+ u32 cpu_freq_threshold;
|
||||
+ struct clk *apps_fab_clk;
|
||||
+ struct clk *ddr_fab_clk;
|
||||
+};
|
||||
+
|
||||
+static struct qcom_fab_scaling_data *drv_data;
|
||||
+
|
||||
+int scale_fabrics(unsigned long max_cpu_freq)
|
||||
+{
|
||||
+ struct clk *apps_fab_clk = drv_data->apps_fab_clk,
|
||||
+ *ddr_fab_clk = drv_data->ddr_fab_clk;
|
||||
+ unsigned long target_freq, cur_freq;
|
||||
+ int ret;
|
||||
+
|
||||
+ /* Skip fab scaling if the driver is not ready */
|
||||
+ if (!apps_fab_clk || !ddr_fab_clk)
|
||||
+ return 0;
|
||||
+
|
||||
+ if (max_cpu_freq > drv_data->cpu_freq_threshold)
|
||||
+ target_freq = drv_data->fab_freq_high;
|
||||
+ else
|
||||
+ target_freq = drv_data->fab_freq_nominal;
|
||||
+
|
||||
+ cur_freq = clk_get_rate(ddr_fab_clk);
|
||||
+
|
||||
+ if (target_freq != cur_freq) {
|
||||
+ ret = clk_set_rate(apps_fab_clk, target_freq);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ ret = clk_set_rate(ddr_fab_clk, target_freq);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+EXPORT_SYMBOL(scale_fabrics);
|
||||
+
|
||||
+static int ipq806x_fab_scaling_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device_node *np = pdev->dev.of_node;
|
||||
+ struct clk *apps_fab_clk, *ddr_fab_clk;
|
||||
+ int ret;
|
||||
+
|
||||
+ if (!np)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
|
||||
+ if (!drv_data)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) {
|
||||
+ pr_err("FABRICS turbo freq not found. Using defaults...\n");
|
||||
+ drv_data->fab_freq_high = 533000000;
|
||||
+ }
|
||||
+
|
||||
+ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) {
|
||||
+ pr_err("FABRICS nominal freq not found. Using defaults...\n");
|
||||
+ drv_data->fab_freq_nominal = 400000000;
|
||||
+ }
|
||||
+
|
||||
+ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) {
|
||||
+ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n");
|
||||
+ drv_data->cpu_freq_threshold = 1000000000;
|
||||
+ }
|
||||
+
|
||||
+ apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk");
|
||||
+ ret = PTR_ERR_OR_ZERO(apps_fab_clk);
|
||||
+ if (ret) {
|
||||
+ /*
|
||||
+ * If apps fab clk node is present, but clock is not yet
|
||||
+ * registered, we should try defering probe.
|
||||
+ */
|
||||
+ if (ret != -EPROBE_DEFER) {
|
||||
+ pr_err("Failed to get APPS FABRIC clock: %d\n", ret);
|
||||
+ ret = -ENODEV;
|
||||
+ }
|
||||
+ goto err;
|
||||
+ }
|
||||
+
|
||||
+ clk_prepare_enable(apps_fab_clk);
|
||||
+ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high);
|
||||
+ drv_data->apps_fab_clk = apps_fab_clk;
|
||||
+
|
||||
+ ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk");
|
||||
+ ret = PTR_ERR_OR_ZERO(ddr_fab_clk);
|
||||
+ if (ret) {
|
||||
+ /*
|
||||
+ * If ddr fab clk node is present, but clock is not yet
|
||||
+ * registered, we should try defering probe.
|
||||
+ */
|
||||
+ if (ret != -EPROBE_DEFER) {
|
||||
+ pr_err("Failed to get DDR FABRIC clock: %d\n", ret);
|
||||
+ ddr_fab_clk = NULL;
|
||||
+ ret = -ENODEV;
|
||||
+ }
|
||||
+ goto err;
|
||||
+ }
|
||||
+
|
||||
+ clk_prepare_enable(ddr_fab_clk);
|
||||
+ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high);
|
||||
+ drv_data->ddr_fab_clk = ddr_fab_clk;
|
||||
+
|
||||
+ return 0;
|
||||
+err:
|
||||
+ kfree(drv_data);
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int ipq806x_fab_scaling_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ kfree(drv_data);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id fab_scaling_ipq806x_match_table[] = {
|
||||
+ { .compatible = "qcom,fab-scaling" },
|
||||
+ { }
|
||||
+};
|
||||
+
|
||||
+static struct platform_driver fab_scaling_ipq806x_driver = {
|
||||
+ .probe = ipq806x_fab_scaling_probe,
|
||||
+ .remove = ipq806x_fab_scaling_remove,
|
||||
+ .driver = {
|
||||
+ .name = "fab-scaling",
|
||||
+ .of_match_table = fab_scaling_ipq806x_match_table,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int __init fab_scaling_ipq806x_init(void)
|
||||
+{
|
||||
+ return platform_driver_register(&fab_scaling_ipq806x_driver);
|
||||
+}
|
||||
+late_initcall(fab_scaling_ipq806x_init);
|
||||
+
|
||||
+static void __exit fab_scaling_ipq806x_exit(void)
|
||||
+{
|
||||
+ platform_driver_unregister(&fab_scaling_ipq806x_driver);
|
||||
+}
|
||||
+module_exit(fab_scaling_ipq806x_exit);
|
||||
--- /dev/null
|
||||
+++ b/include/linux/fab_scaling.h
|
||||
@@ -0,0 +1,31 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * Permission to use, copy, modify, and/or distribute this software for any
|
||||
+ * purpose with or without fee is hereby granted, provided that the above
|
||||
+ * copyright notice and this permission notice appear in all copies.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+
|
||||
+#ifndef __FAB_SCALING_H
|
||||
+#define __FAB_SCALING_H
|
||||
+
|
||||
+/**
|
||||
+ * scale_fabrics - Scale DDR and APPS FABRICS
|
||||
+ *
|
||||
+ * This function monitors all the registered clocks and does APPS
|
||||
+ * and DDR FABRIC scaling based on the idle frequencies with which
|
||||
+ * it was registered.
|
||||
+ *
|
||||
+ */
|
||||
+int scale_fabrics(unsigned long max_cpu_freq);
|
||||
+
|
||||
+#endif
|
||||
--- a/drivers/cpufreq/qcom-cpufreq-krait.c
|
||||
+++ b/drivers/cpufreq/qcom-cpufreq-krait.c
|
||||
@@ -15,6 +15,7 @@
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/thermal.h>
|
||||
+#include <linux/fab_scaling.h>
|
||||
|
||||
#include "cpufreq-dt.h"
|
||||
|
||||
@@ -68,6 +69,13 @@ static int set_target(struct cpufreq_pol
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
+ /*
|
||||
+ * Scale fabrics with max freq across all cores
|
||||
+ */
|
||||
+ ret = scale_fabrics(target_freq);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
opp = dev_pm_opp_find_level_exact(&l2_pdev->dev, level);
|
||||
if (IS_ERR(opp)) {
|
||||
dev_err(&l2_pdev->dev,
|
|
@ -0,0 +1,239 @@
|
|||
From 6949d651e3be3ebbfedb6bbd5b541cfda6ee58a9 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 10 Feb 2021 10:40:17 +0100
|
||||
Subject: [PATCH 1/2] mtd: nand: raw: qcom_nandc: add boot_layout_mode support
|
||||
|
||||
ipq806x nand have a special ecc configuration for the boot pages. The
|
||||
use of the non-boot pages configuration on boot pages cause I/O error
|
||||
and can cause broken data written to the nand. Add support for this
|
||||
special configuration if the page to be read/write is in the size of the
|
||||
boot pages set by the dts.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
---
|
||||
drivers/mtd/nand/raw/qcom_nandc.c | 82 +++++++++++++++++++++++++++++--
|
||||
1 file changed, 77 insertions(+), 5 deletions(-)
|
||||
|
||||
--- a/drivers/mtd/nand/raw/qcom_nandc.c
|
||||
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
|
||||
@@ -159,6 +159,11 @@
|
||||
/* NAND_CTRL bits */
|
||||
#define BAM_MODE_EN BIT(0)
|
||||
|
||||
+
|
||||
+#define UD_SIZE_BYTES_MASK (0x3ff << UD_SIZE_BYTES)
|
||||
+#define SPARE_SIZE_BYTES_MASK (0xf << SPARE_SIZE_BYTES)
|
||||
+#define ECC_NUM_DATA_BYTES_MASK (0x3ff << ECC_NUM_DATA_BYTES)
|
||||
+
|
||||
/*
|
||||
* the NAND controller performs reads/writes with ECC in 516 byte chunks.
|
||||
* the driver calls the chunks 'step' or 'codeword' interchangeably
|
||||
@@ -430,6 +435,13 @@ struct qcom_nand_controller {
|
||||
* @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
|
||||
* ecc/non-ecc mode for the current nand flash
|
||||
* device
|
||||
+ *
|
||||
+ * @boot_pages_conf: keep track of the current ecc configuration used by
|
||||
+ * the driver for read/write operation. (boot pages
|
||||
+ * have different configuration than normal page)
|
||||
+ * @boot_pages: number of pages starting from 0 used as boot pages
|
||||
+ * where the driver will use the boot pages ecc
|
||||
+ * configuration for read/write operation
|
||||
*/
|
||||
struct qcom_nand_host {
|
||||
struct nand_chip chip;
|
||||
@@ -452,6 +464,9 @@ struct qcom_nand_host {
|
||||
u32 ecc_bch_cfg;
|
||||
u32 clrflashstatus;
|
||||
u32 clrreadstatus;
|
||||
+
|
||||
+ bool boot_pages_conf;
|
||||
+ u32 boot_pages;
|
||||
};
|
||||
|
||||
/*
|
||||
@@ -460,12 +475,14 @@ struct qcom_nand_host {
|
||||
* @ecc_modes - ecc mode for NAND
|
||||
* @is_bam - whether NAND controller is using BAM
|
||||
* @is_qpic - whether NAND CTRL is part of qpic IP
|
||||
+ * @has_boot_pages - whether NAND has different ecc settings for boot pages
|
||||
* @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
|
||||
*/
|
||||
struct qcom_nandc_props {
|
||||
u32 ecc_modes;
|
||||
bool is_bam;
|
||||
bool is_qpic;
|
||||
+ bool has_boot_pages;
|
||||
u32 dev_cmd_reg_start;
|
||||
};
|
||||
|
||||
@@ -1604,7 +1621,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *
|
||||
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
|
||||
oob_size1 = host->bbm_size;
|
||||
|
||||
- if (cw == (ecc->steps - 1)) {
|
||||
+ if (cw == (ecc->steps - 1) && !host->boot_pages_conf) {
|
||||
data_size2 = ecc->size - data_size1 -
|
||||
((ecc->steps - 1) * 4);
|
||||
oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
|
||||
@@ -1685,7 +1702,7 @@ check_for_erased_page(struct qcom_nand_h
|
||||
}
|
||||
|
||||
for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
|
||||
- if (cw == (ecc->steps - 1)) {
|
||||
+ if (cw == (ecc->steps - 1) && !host->boot_pages_conf) {
|
||||
data_size = ecc->size - ((ecc->steps - 1) * 4);
|
||||
oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
|
||||
} else {
|
||||
@@ -1844,7 +1861,7 @@ static int read_page_ecc(struct qcom_nan
|
||||
for (i = 0; i < ecc->steps; i++) {
|
||||
int data_size, oob_size;
|
||||
|
||||
- if (i == (ecc->steps - 1)) {
|
||||
+ if (i == (ecc->steps - 1) && !host->boot_pages_conf) {
|
||||
data_size = ecc->size - ((ecc->steps - 1) << 2);
|
||||
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
|
||||
host->spare_bytes;
|
||||
@@ -1941,6 +1958,30 @@ static int copy_last_cw(struct qcom_nand
|
||||
return ret;
|
||||
}
|
||||
|
||||
+static void
|
||||
+check_boot_pages_conf(struct qcom_nand_host *host, int page)
|
||||
+{
|
||||
+ bool boot_pages_conf = page < host->boot_pages;
|
||||
+
|
||||
+ /* Skip conf write if we are already in the correct mode */
|
||||
+ if (boot_pages_conf != host->boot_pages_conf) {
|
||||
+ host->boot_pages_conf = boot_pages_conf;
|
||||
+
|
||||
+ host->cw_data = boot_pages_conf ? 512 : 516;
|
||||
+ host->spare_bytes = host->cw_size - host->ecc_bytes_hw -
|
||||
+ host->bbm_size - host->cw_data;
|
||||
+
|
||||
+ host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK);
|
||||
+ host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES |
|
||||
+ host->cw_data << UD_SIZE_BYTES;
|
||||
+
|
||||
+ host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK;
|
||||
+ host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES;
|
||||
+ host->ecc_buf_cfg = (boot_pages_conf ? 0x1ff : 0x203) <<
|
||||
+ NUM_STEPS;
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
/* implements ecc->read_page() */
|
||||
static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
|
||||
int oob_required, int page)
|
||||
@@ -1949,6 +1990,9 @@ static int qcom_nandc_read_page(struct n
|
||||
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
|
||||
u8 *data_buf, *oob_buf = NULL;
|
||||
|
||||
+ if (host->boot_pages)
|
||||
+ check_boot_pages_conf(host, page);
|
||||
+
|
||||
nand_read_page_op(chip, page, 0, NULL, 0);
|
||||
data_buf = buf;
|
||||
oob_buf = oob_required ? chip->oob_poi : NULL;
|
||||
@@ -1968,6 +2012,9 @@ static int qcom_nandc_read_page_raw(stru
|
||||
int cw, ret;
|
||||
u8 *data_buf = buf, *oob_buf = chip->oob_poi;
|
||||
|
||||
+ if (host->boot_pages)
|
||||
+ check_boot_pages_conf(host, page);
|
||||
+
|
||||
for (cw = 0; cw < ecc->steps; cw++) {
|
||||
ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf,
|
||||
page, cw);
|
||||
@@ -1988,6 +2035,9 @@ static int qcom_nandc_read_oob(struct na
|
||||
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
|
||||
struct nand_ecc_ctrl *ecc = &chip->ecc;
|
||||
|
||||
+ if (host->boot_pages)
|
||||
+ check_boot_pages_conf(host, page);
|
||||
+
|
||||
clear_read_regs(nandc);
|
||||
clear_bam_transaction(nandc);
|
||||
|
||||
@@ -2008,6 +2058,9 @@ static int qcom_nandc_write_page(struct
|
||||
u8 *data_buf, *oob_buf;
|
||||
int i, ret;
|
||||
|
||||
+ if (host->boot_pages)
|
||||
+ check_boot_pages_conf(host, page);
|
||||
+
|
||||
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
|
||||
|
||||
clear_read_regs(nandc);
|
||||
@@ -2023,7 +2076,7 @@ static int qcom_nandc_write_page(struct
|
||||
for (i = 0; i < ecc->steps; i++) {
|
||||
int data_size, oob_size;
|
||||
|
||||
- if (i == (ecc->steps - 1)) {
|
||||
+ if (i == (ecc->steps - 1) && !host->boot_pages_conf) {
|
||||
data_size = ecc->size - ((ecc->steps - 1) << 2);
|
||||
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
|
||||
host->spare_bytes;
|
||||
@@ -2080,6 +2133,9 @@ static int qcom_nandc_write_page_raw(str
|
||||
u8 *data_buf, *oob_buf;
|
||||
int i, ret;
|
||||
|
||||
+ if (host->boot_pages)
|
||||
+ check_boot_pages_conf(host, page);
|
||||
+
|
||||
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
|
||||
clear_read_regs(nandc);
|
||||
clear_bam_transaction(nandc);
|
||||
@@ -2098,7 +2154,7 @@ static int qcom_nandc_write_page_raw(str
|
||||
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
|
||||
oob_size1 = host->bbm_size;
|
||||
|
||||
- if (i == (ecc->steps - 1)) {
|
||||
+ if (i == (ecc->steps - 1) && !host->boot_pages_conf) {
|
||||
data_size2 = ecc->size - data_size1 -
|
||||
((ecc->steps - 1) << 2);
|
||||
oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
|
||||
@@ -2158,6 +2214,9 @@ static int qcom_nandc_write_oob(struct n
|
||||
int data_size, oob_size;
|
||||
int ret;
|
||||
|
||||
+ if (host->boot_pages)
|
||||
+ check_boot_pages_conf(host, page);
|
||||
+
|
||||
host->use_ecc = true;
|
||||
clear_bam_transaction(nandc);
|
||||
|
||||
@@ -2806,6 +2865,7 @@ static int qcom_nand_host_init_and_regis
|
||||
struct nand_chip *chip = &host->chip;
|
||||
struct mtd_info *mtd = nand_to_mtd(chip);
|
||||
struct device *dev = nandc->dev;
|
||||
+ u32 boot_pages_size;
|
||||
int ret;
|
||||
|
||||
ret = of_property_read_u32(dn, "reg", &host->cs);
|
||||
@@ -2866,6 +2926,17 @@ static int qcom_nand_host_init_and_regis
|
||||
if (ret)
|
||||
nand_cleanup(chip);
|
||||
|
||||
+ if (nandc->props->has_boot_pages &&
|
||||
+ of_property_read_bool(dn, "nand-is-boot-medium")) {
|
||||
+ ret = of_property_read_u32(dn, "qcom,boot_pages_size",
|
||||
+ &boot_pages_size);
|
||||
+ if (ret)
|
||||
+ dev_warn(dev, "can't get boot pages size");
|
||||
+ else
|
||||
+ /* Convert size to nand pages */
|
||||
+ host->boot_pages = boot_pages_size / mtd->writesize;
|
||||
+ }
|
||||
+
|
||||
return ret;
|
||||
}
|
||||
|
||||
@@ -3032,6 +3103,7 @@ static int qcom_nandc_remove(struct plat
|
||||
static const struct qcom_nandc_props ipq806x_nandc_props = {
|
||||
.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
|
||||
.is_bam = false,
|
||||
+ .has_boot_pages = true,
|
||||
.dev_cmd_reg_start = 0x0,
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
From 6fb003a7a117f97a35b078ba726c84adeae29c4c Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 10 Feb 2021 10:54:19 +0100
|
||||
Subject: [PATCH 2/2] Documentation: devicetree: mtd: qcom_nandc: document
|
||||
qcom,boot_layout_size binding
|
||||
|
||||
Document new qcom,boot_layout_size binding used to apply special
|
||||
read/write confituation to boots partitions.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
---
|
||||
Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 11 +++++++++++
|
||||
1 file changed, 11 insertions(+)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
|
||||
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
|
||||
@@ -52,6 +52,15 @@ Optional properties:
|
||||
be used according to chip requirement and available
|
||||
OOB size.
|
||||
|
||||
+EBI2 specific properties:
|
||||
+- nand-is-boot-medium: nand contains boot partitions and different ecc configuration
|
||||
+ should be used for these partitions.
|
||||
+- qcom,boot_pages_size: should contain the size of the total boot partitions
|
||||
+ where the boot layout read/write specific configuration
|
||||
+ should be used. The boot layout is considered from the
|
||||
+ start of the nand to the value set in this binding.
|
||||
+ Only used in combination with 'nand-is-boot-medium'.
|
||||
+
|
||||
Each nandcs device node may optionally contain a 'partitions' sub-node, which
|
||||
further contains sub-nodes describing the flash partition mapping. See
|
||||
partition.txt for more detail.
|
||||
@@ -80,6 +89,9 @@ nand-controller@1ac00000 {
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
+ nand-is-boot-medium;
|
||||
+ qcom,boot_pages_size: <0x58a0000>;
|
||||
+
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
|
@ -0,0 +1,965 @@
|
|||
From 5c9f8c2dbdbe53818bcde6aa6695e1331e5f841f Mon Sep 17 00:00:00 2001
|
||||
From: Jonathan McDowell <noodles@earth.li>
|
||||
Date: Sat, 14 Nov 2020 14:02:33 +0000
|
||||
Subject: dmaengine: qcom: Add ADM driver
|
||||
|
||||
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
|
||||
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
|
||||
|
||||
The ADM supports both memory to memory transactions and memory
|
||||
to/from peripheral device transactions. The controller also provides
|
||||
flow control capabilities for transactions to/from peripheral devices.
|
||||
|
||||
The initial release of this driver supports slave transfers to/from
|
||||
peripherals and also incorporates CRCI (client rate control interface)
|
||||
flow control.
|
||||
|
||||
The hardware only supports a 32 bit physical address, so specifying
|
||||
!PHYS_ADDR_T_64BIT gives maximum COMPILE_TEST coverage without having to
|
||||
spend effort on kludging things in the code that will never actually be
|
||||
needed on real hardware.
|
||||
|
||||
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
||||
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
|
||||
Signed-off-by: Jonathan McDowell <noodles@earth.li>
|
||||
Link: https://lore.kernel.org/r/20201114140233.GM32650@earth.li
|
||||
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
||||
---
|
||||
drivers/dma/qcom/Kconfig | 11 +
|
||||
drivers/dma/qcom/Makefile | 1 +
|
||||
drivers/dma/qcom/qcom_adm.c | 903 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
3 files changed, 915 insertions(+)
|
||||
create mode 100644 drivers/dma/qcom/qcom_adm.c
|
||||
|
||||
--- a/drivers/dma/qcom/Kconfig
|
||||
+++ b/drivers/dma/qcom/Kconfig
|
||||
@@ -1,4 +1,15 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
+config QCOM_ADM
|
||||
+ tristate "Qualcomm ADM support"
|
||||
+ depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT
|
||||
+ select DMA_ENGINE
|
||||
+ select DMA_VIRTUAL_CHANNELS
|
||||
+ help
|
||||
+ Enable support for the Qualcomm Application Data Mover (ADM) DMA
|
||||
+ controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
|
||||
+ This controller provides DMA capabilities for both general purpose
|
||||
+ and on-chip peripheral devices.
|
||||
+
|
||||
config QCOM_BAM_DMA
|
||||
tristate "QCOM BAM DMA support"
|
||||
depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
|
||||
--- a/drivers/dma/qcom/Makefile
|
||||
+++ b/drivers/dma/qcom/Makefile
|
||||
@@ -1,4 +1,5 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
|
||||
obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
|
||||
obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
|
||||
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/dma/qcom/qcom_adm.c
|
||||
@@ -0,0 +1,903 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0-only
|
||||
+/*
|
||||
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/dmaengine.h>
|
||||
+#include <linux/dma-mapping.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_address.h>
|
||||
+#include <linux/of_irq.h>
|
||||
+#include <linux/of_dma.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/reset.h>
|
||||
+#include <linux/scatterlist.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#include "../dmaengine.h"
|
||||
+#include "../virt-dma.h"
|
||||
+
|
||||
+/* ADM registers - calculated from channel number and security domain */
|
||||
+#define ADM_CHAN_MULTI 0x4
|
||||
+#define ADM_CI_MULTI 0x4
|
||||
+#define ADM_CRCI_MULTI 0x4
|
||||
+#define ADM_EE_MULTI 0x800
|
||||
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * (chan))
|
||||
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * (ee))
|
||||
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
|
||||
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * (chan))
|
||||
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
|
||||
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
|
||||
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
|
||||
+#define ADM_CI_CONF(ci) (0x390 + (ci) * ADM_CI_MULTI)
|
||||
+#define ADM_GP_CTL 0x3d8
|
||||
+#define ADM_CRCI_CTL(crci, ee) (0x400 + (crci) * ADM_CRCI_MULTI + \
|
||||
+ ADM_EE_OFFS(ee))
|
||||
+
|
||||
+/* channel status */
|
||||
+#define ADM_CH_STATUS_VALID BIT(1)
|
||||
+
|
||||
+/* channel result */
|
||||
+#define ADM_CH_RSLT_VALID BIT(31)
|
||||
+#define ADM_CH_RSLT_ERR BIT(3)
|
||||
+#define ADM_CH_RSLT_FLUSH BIT(2)
|
||||
+#define ADM_CH_RSLT_TPD BIT(1)
|
||||
+
|
||||
+/* channel conf */
|
||||
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
|
||||
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
|
||||
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
|
||||
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
|
||||
+#define ADM_CH_CONF_SEC_DOMAIN(ee) ((((ee) & 0x3) << 4) | (((ee) & 0x4) << 11))
|
||||
+
|
||||
+/* channel result conf */
|
||||
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
|
||||
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
|
||||
+
|
||||
+/* CRCI CTL */
|
||||
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
|
||||
+#define ADM_CRCI_CTL_RST BIT(17)
|
||||
+
|
||||
+/* CI configuration */
|
||||
+#define ADM_CI_RANGE_END(x) ((x) << 24)
|
||||
+#define ADM_CI_RANGE_START(x) ((x) << 16)
|
||||
+#define ADM_CI_BURST_4_WORDS BIT(2)
|
||||
+#define ADM_CI_BURST_8_WORDS BIT(3)
|
||||
+
|
||||
+/* GP CTL */
|
||||
+#define ADM_GP_CTL_LP_EN BIT(12)
|
||||
+#define ADM_GP_CTL_LP_CNT(x) ((x) << 8)
|
||||
+
|
||||
+/* Command pointer list entry */
|
||||
+#define ADM_CPLE_LP BIT(31)
|
||||
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
|
||||
+
|
||||
+/* Command list entry */
|
||||
+#define ADM_CMD_LC BIT(31)
|
||||
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
|
||||
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
|
||||
+
|
||||
+#define ADM_CMD_TYPE_SINGLE 0x0
|
||||
+#define ADM_CMD_TYPE_BOX 0x3
|
||||
+
|
||||
+#define ADM_CRCI_MUX_SEL BIT(4)
|
||||
+#define ADM_DESC_ALIGN 8
|
||||
+#define ADM_MAX_XFER (SZ_64K - 1)
|
||||
+#define ADM_MAX_ROWS (SZ_64K - 1)
|
||||
+#define ADM_MAX_CHANNELS 16
|
||||
+
|
||||
+struct adm_desc_hw_box {
|
||||
+ u32 cmd;
|
||||
+ u32 src_addr;
|
||||
+ u32 dst_addr;
|
||||
+ u32 row_len;
|
||||
+ u32 num_rows;
|
||||
+ u32 row_offset;
|
||||
+};
|
||||
+
|
||||
+struct adm_desc_hw_single {
|
||||
+ u32 cmd;
|
||||
+ u32 src_addr;
|
||||
+ u32 dst_addr;
|
||||
+ u32 len;
|
||||
+};
|
||||
+
|
||||
+struct adm_async_desc {
|
||||
+ struct virt_dma_desc vd;
|
||||
+ struct adm_device *adev;
|
||||
+
|
||||
+ size_t length;
|
||||
+ enum dma_transfer_direction dir;
|
||||
+ dma_addr_t dma_addr;
|
||||
+ size_t dma_len;
|
||||
+
|
||||
+ void *cpl;
|
||||
+ dma_addr_t cp_addr;
|
||||
+ u32 crci;
|
||||
+ u32 mux;
|
||||
+ u32 blk_size;
|
||||
+};
|
||||
+
|
||||
+struct adm_chan {
|
||||
+ struct virt_dma_chan vc;
|
||||
+ struct adm_device *adev;
|
||||
+
|
||||
+ /* parsed from DT */
|
||||
+ u32 id; /* channel id */
|
||||
+
|
||||
+ struct adm_async_desc *curr_txd;
|
||||
+ struct dma_slave_config slave;
|
||||
+ struct list_head node;
|
||||
+
|
||||
+ int error;
|
||||
+ int initialized;
|
||||
+};
|
||||
+
|
||||
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
|
||||
+{
|
||||
+ return container_of(common, struct adm_chan, vc.chan);
|
||||
+}
|
||||
+
|
||||
+struct adm_device {
|
||||
+ void __iomem *regs;
|
||||
+ struct device *dev;
|
||||
+ struct dma_device common;
|
||||
+ struct device_dma_parameters dma_parms;
|
||||
+ struct adm_chan *channels;
|
||||
+
|
||||
+ u32 ee;
|
||||
+
|
||||
+ struct clk *core_clk;
|
||||
+ struct clk *iface_clk;
|
||||
+
|
||||
+ struct reset_control *clk_reset;
|
||||
+ struct reset_control *c0_reset;
|
||||
+ struct reset_control *c1_reset;
|
||||
+ struct reset_control *c2_reset;
|
||||
+ int irq;
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
+ * adm_free_chan - Frees dma resources associated with the specific channel
|
||||
+ *
|
||||
+ * Free all allocated descriptors associated with this channel
|
||||
+ *
|
||||
+ */
|
||||
+static void adm_free_chan(struct dma_chan *chan)
|
||||
+{
|
||||
+ /* free all queued descriptors */
|
||||
+ vchan_free_chan_resources(to_virt_chan(chan));
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_get_blksize - Get block size from burst value
|
||||
+ *
|
||||
+ */
|
||||
+static int adm_get_blksize(unsigned int burst)
|
||||
+{
|
||||
+ int ret;
|
||||
+
|
||||
+ switch (burst) {
|
||||
+ case 16:
|
||||
+ case 32:
|
||||
+ case 64:
|
||||
+ case 128:
|
||||
+ ret = ffs(burst >> 4) - 1;
|
||||
+ break;
|
||||
+ case 192:
|
||||
+ ret = 4;
|
||||
+ break;
|
||||
+ case 256:
|
||||
+ ret = 5;
|
||||
+ break;
|
||||
+ default:
|
||||
+ ret = -EINVAL;
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
|
||||
+ *
|
||||
+ * @achan: ADM channel
|
||||
+ * @desc: Descriptor memory pointer
|
||||
+ * @sg: Scatterlist entry
|
||||
+ * @crci: CRCI value
|
||||
+ * @burst: Burst size of transaction
|
||||
+ * @direction: DMA transfer direction
|
||||
+ */
|
||||
+static void *adm_process_fc_descriptors(struct adm_chan *achan, void *desc,
|
||||
+ struct scatterlist *sg, u32 crci,
|
||||
+ u32 burst,
|
||||
+ enum dma_transfer_direction direction)
|
||||
+{
|
||||
+ struct adm_desc_hw_box *box_desc = NULL;
|
||||
+ struct adm_desc_hw_single *single_desc;
|
||||
+ u32 remainder = sg_dma_len(sg);
|
||||
+ u32 rows, row_offset, crci_cmd;
|
||||
+ u32 mem_addr = sg_dma_address(sg);
|
||||
+ u32 *incr_addr = &mem_addr;
|
||||
+ u32 *src, *dst;
|
||||
+
|
||||
+ if (direction == DMA_DEV_TO_MEM) {
|
||||
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
|
||||
+ row_offset = burst;
|
||||
+ src = &achan->slave.src_addr;
|
||||
+ dst = &mem_addr;
|
||||
+ } else {
|
||||
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
|
||||
+ row_offset = burst << 16;
|
||||
+ src = &mem_addr;
|
||||
+ dst = &achan->slave.dst_addr;
|
||||
+ }
|
||||
+
|
||||
+ while (remainder >= burst) {
|
||||
+ box_desc = desc;
|
||||
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
|
||||
+ box_desc->row_offset = row_offset;
|
||||
+ box_desc->src_addr = *src;
|
||||
+ box_desc->dst_addr = *dst;
|
||||
+
|
||||
+ rows = remainder / burst;
|
||||
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
|
||||
+ box_desc->num_rows = rows << 16 | rows;
|
||||
+ box_desc->row_len = burst << 16 | burst;
|
||||
+
|
||||
+ *incr_addr += burst * rows;
|
||||
+ remainder -= burst * rows;
|
||||
+ desc += sizeof(*box_desc);
|
||||
+ }
|
||||
+
|
||||
+ /* if leftover bytes, do one single descriptor */
|
||||
+ if (remainder) {
|
||||
+ single_desc = desc;
|
||||
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
|
||||
+ single_desc->len = remainder;
|
||||
+ single_desc->src_addr = *src;
|
||||
+ single_desc->dst_addr = *dst;
|
||||
+ desc += sizeof(*single_desc);
|
||||
+
|
||||
+ if (sg_is_last(sg))
|
||||
+ single_desc->cmd |= ADM_CMD_LC;
|
||||
+ } else {
|
||||
+ if (box_desc && sg_is_last(sg))
|
||||
+ box_desc->cmd |= ADM_CMD_LC;
|
||||
+ }
|
||||
+
|
||||
+ return desc;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
|
||||
+ *
|
||||
+ * @achan: ADM channel
|
||||
+ * @desc: Descriptor memory pointer
|
||||
+ * @sg: Scatterlist entry
|
||||
+ * @direction: DMA transfer direction
|
||||
+ */
|
||||
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan, void *desc,
|
||||
+ struct scatterlist *sg,
|
||||
+ enum dma_transfer_direction direction)
|
||||
+{
|
||||
+ struct adm_desc_hw_single *single_desc;
|
||||
+ u32 remainder = sg_dma_len(sg);
|
||||
+ u32 mem_addr = sg_dma_address(sg);
|
||||
+ u32 *incr_addr = &mem_addr;
|
||||
+ u32 *src, *dst;
|
||||
+
|
||||
+ if (direction == DMA_DEV_TO_MEM) {
|
||||
+ src = &achan->slave.src_addr;
|
||||
+ dst = &mem_addr;
|
||||
+ } else {
|
||||
+ src = &mem_addr;
|
||||
+ dst = &achan->slave.dst_addr;
|
||||
+ }
|
||||
+
|
||||
+ do {
|
||||
+ single_desc = desc;
|
||||
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
|
||||
+ single_desc->src_addr = *src;
|
||||
+ single_desc->dst_addr = *dst;
|
||||
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
|
||||
+ ADM_MAX_XFER : remainder;
|
||||
+
|
||||
+ remainder -= single_desc->len;
|
||||
+ *incr_addr += single_desc->len;
|
||||
+ desc += sizeof(*single_desc);
|
||||
+ } while (remainder);
|
||||
+
|
||||
+ /* set last command if this is the end of the whole transaction */
|
||||
+ if (sg_is_last(sg))
|
||||
+ single_desc->cmd |= ADM_CMD_LC;
|
||||
+
|
||||
+ return desc;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_prep_slave_sg - Prep slave sg transaction
|
||||
+ *
|
||||
+ * @chan: dma channel
|
||||
+ * @sgl: scatter gather list
|
||||
+ * @sg_len: length of sg
|
||||
+ * @direction: DMA transfer direction
|
||||
+ * @flags: DMA flags
|
||||
+ * @context: transfer context (unused)
|
||||
+ */
|
||||
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
|
||||
+ struct scatterlist *sgl,
|
||||
+ unsigned int sg_len,
|
||||
+ enum dma_transfer_direction direction,
|
||||
+ unsigned long flags,
|
||||
+ void *context)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ struct adm_device *adev = achan->adev;
|
||||
+ struct adm_async_desc *async_desc;
|
||||
+ struct scatterlist *sg;
|
||||
+ dma_addr_t cple_addr;
|
||||
+ u32 i, burst;
|
||||
+ u32 single_count = 0, box_count = 0, crci = 0;
|
||||
+ void *desc;
|
||||
+ u32 *cple;
|
||||
+ int blk_size = 0;
|
||||
+
|
||||
+ if (!is_slave_direction(direction)) {
|
||||
+ dev_err(adev->dev, "invalid dma direction\n");
|
||||
+ return NULL;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * get burst value from slave configuration
|
||||
+ */
|
||||
+ burst = (direction == DMA_MEM_TO_DEV) ?
|
||||
+ achan->slave.dst_maxburst :
|
||||
+ achan->slave.src_maxburst;
|
||||
+
|
||||
+ /* if using flow control, validate burst and crci values */
|
||||
+ if (achan->slave.device_fc) {
|
||||
+ blk_size = adm_get_blksize(burst);
|
||||
+ if (blk_size < 0) {
|
||||
+ dev_err(adev->dev, "invalid burst value: %d\n",
|
||||
+ burst);
|
||||
+ return ERR_PTR(-EINVAL);
|
||||
+ }
|
||||
+
|
||||
+ crci = achan->slave.slave_id & 0xf;
|
||||
+ if (!crci || achan->slave.slave_id > 0x1f) {
|
||||
+ dev_err(adev->dev, "invalid crci value\n");
|
||||
+ return ERR_PTR(-EINVAL);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ /* iterate through sgs and compute allocation size of structures */
|
||||
+ for_each_sg(sgl, sg, sg_len, i) {
|
||||
+ if (achan->slave.device_fc) {
|
||||
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
|
||||
+ ADM_MAX_ROWS);
|
||||
+ if (sg_dma_len(sg) % burst)
|
||||
+ single_count++;
|
||||
+ } else {
|
||||
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
|
||||
+ ADM_MAX_XFER);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
|
||||
+ if (!async_desc)
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+
|
||||
+ if (crci)
|
||||
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
|
||||
+ ADM_CRCI_CTL_MUX_SEL : 0;
|
||||
+ async_desc->crci = crci;
|
||||
+ async_desc->blk_size = blk_size;
|
||||
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
|
||||
+ box_count * sizeof(struct adm_desc_hw_box) +
|
||||
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
|
||||
+
|
||||
+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_NOWAIT);
|
||||
+ if (!async_desc->cpl)
|
||||
+ goto free;
|
||||
+
|
||||
+ async_desc->adev = adev;
|
||||
+
|
||||
+ /* both command list entry and descriptors must be 8 byte aligned */
|
||||
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
|
||||
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
|
||||
+
|
||||
+ for_each_sg(sgl, sg, sg_len, i) {
|
||||
+ async_desc->length += sg_dma_len(sg);
|
||||
+
|
||||
+ if (achan->slave.device_fc)
|
||||
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
|
||||
+ burst, direction);
|
||||
+ else
|
||||
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
|
||||
+ direction);
|
||||
+ }
|
||||
+
|
||||
+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
|
||||
+ async_desc->dma_len,
|
||||
+ DMA_TO_DEVICE);
|
||||
+ if (dma_mapping_error(adev->dev, async_desc->dma_addr))
|
||||
+ goto free;
|
||||
+
|
||||
+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
|
||||
+
|
||||
+ /* init cmd list */
|
||||
+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
|
||||
+ DMA_TO_DEVICE);
|
||||
+ *cple = ADM_CPLE_LP;
|
||||
+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
|
||||
+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
|
||||
+ DMA_TO_DEVICE);
|
||||
+
|
||||
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
|
||||
+
|
||||
+free:
|
||||
+ kfree(async_desc);
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_terminate_all - terminate all transactions on a channel
|
||||
+ * @achan: adm dma channel
|
||||
+ *
|
||||
+ * Dequeues and frees all transactions, aborts current transaction
|
||||
+ * No callbacks are done
|
||||
+ *
|
||||
+ */
|
||||
+static int adm_terminate_all(struct dma_chan *chan)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ struct adm_device *adev = achan->adev;
|
||||
+ unsigned long flags;
|
||||
+ LIST_HEAD(head);
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+ vchan_get_all_descriptors(&achan->vc, &head);
|
||||
+
|
||||
+ /* send flush command to terminate current transaction */
|
||||
+ writel_relaxed(0x0,
|
||||
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
|
||||
+
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+
|
||||
+ vchan_dma_desc_free_list(&achan->vc, &head);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ unsigned long flag;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flag);
|
||||
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_start_dma - start next transaction
|
||||
+ * @achan - ADM dma channel
|
||||
+ */
|
||||
+static void adm_start_dma(struct adm_chan *achan)
|
||||
+{
|
||||
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
|
||||
+ struct adm_device *adev = achan->adev;
|
||||
+ struct adm_async_desc *async_desc;
|
||||
+
|
||||
+ lockdep_assert_held(&achan->vc.lock);
|
||||
+
|
||||
+ if (!vd)
|
||||
+ return;
|
||||
+
|
||||
+ list_del(&vd->node);
|
||||
+
|
||||
+ /* write next command list out to the CMD FIFO */
|
||||
+ async_desc = container_of(vd, struct adm_async_desc, vd);
|
||||
+ achan->curr_txd = async_desc;
|
||||
+
|
||||
+ /* reset channel error */
|
||||
+ achan->error = 0;
|
||||
+
|
||||
+ if (!achan->initialized) {
|
||||
+ /* enable interrupts */
|
||||
+ writel(ADM_CH_CONF_SHADOW_EN |
|
||||
+ ADM_CH_CONF_PERM_MPU_CONF |
|
||||
+ ADM_CH_CONF_MPU_DISABLE |
|
||||
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
|
||||
+ adev->regs + ADM_CH_CONF(achan->id));
|
||||
+
|
||||
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
|
||||
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
|
||||
+
|
||||
+ achan->initialized = 1;
|
||||
+ }
|
||||
+
|
||||
+ /* set the crci block size if this transaction requires CRCI */
|
||||
+ if (async_desc->crci) {
|
||||
+ writel(async_desc->mux | async_desc->blk_size,
|
||||
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
|
||||
+ }
|
||||
+
|
||||
+ /* make sure IRQ enable doesn't get reordered */
|
||||
+ wmb();
|
||||
+
|
||||
+ /* write next command list out to the CMD FIFO */
|
||||
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
|
||||
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_dma_irq - irq handler for ADM controller
|
||||
+ * @irq: IRQ of interrupt
|
||||
+ * @data: callback data
|
||||
+ *
|
||||
+ * IRQ handler for the bam controller
|
||||
+ */
|
||||
+static irqreturn_t adm_dma_irq(int irq, void *data)
|
||||
+{
|
||||
+ struct adm_device *adev = data;
|
||||
+ u32 srcs, i;
|
||||
+ struct adm_async_desc *async_desc;
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ srcs = readl_relaxed(adev->regs +
|
||||
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
|
||||
+
|
||||
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
|
||||
+ struct adm_chan *achan = &adev->channels[i];
|
||||
+ u32 status, result;
|
||||
+
|
||||
+ if (srcs & BIT(i)) {
|
||||
+ status = readl_relaxed(adev->regs +
|
||||
+ ADM_CH_STATUS_SD(i, adev->ee));
|
||||
+
|
||||
+ /* if no result present, skip */
|
||||
+ if (!(status & ADM_CH_STATUS_VALID))
|
||||
+ continue;
|
||||
+
|
||||
+ result = readl_relaxed(adev->regs +
|
||||
+ ADM_CH_RSLT(i, adev->ee));
|
||||
+
|
||||
+ /* no valid results, skip */
|
||||
+ if (!(result & ADM_CH_RSLT_VALID))
|
||||
+ continue;
|
||||
+
|
||||
+ /* flag error if transaction was flushed or failed */
|
||||
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
|
||||
+ achan->error = 1;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+ async_desc = achan->curr_txd;
|
||||
+
|
||||
+ achan->curr_txd = NULL;
|
||||
+
|
||||
+ if (async_desc) {
|
||||
+ vchan_cookie_complete(&async_desc->vd);
|
||||
+
|
||||
+ /* kick off next DMA */
|
||||
+ adm_start_dma(achan);
|
||||
+ }
|
||||
+
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_tx_status - returns status of transaction
|
||||
+ * @chan: dma channel
|
||||
+ * @cookie: transaction cookie
|
||||
+ * @txstate: DMA transaction state
|
||||
+ *
|
||||
+ * Return status of dma transaction
|
||||
+ */
|
||||
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
|
||||
+ struct dma_tx_state *txstate)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ struct virt_dma_desc *vd;
|
||||
+ enum dma_status ret;
|
||||
+ unsigned long flags;
|
||||
+ size_t residue = 0;
|
||||
+
|
||||
+ ret = dma_cookie_status(chan, cookie, txstate);
|
||||
+ if (ret == DMA_COMPLETE || !txstate)
|
||||
+ return ret;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+
|
||||
+ vd = vchan_find_desc(&achan->vc, cookie);
|
||||
+ if (vd)
|
||||
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
|
||||
+
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+
|
||||
+ /*
|
||||
+ * residue is either the full length if it is in the issued list, or 0
|
||||
+ * if it is in progress. We have no reliable way of determining
|
||||
+ * anything inbetween
|
||||
+ */
|
||||
+ dma_set_residue(txstate, residue);
|
||||
+
|
||||
+ if (achan->error)
|
||||
+ return DMA_ERROR;
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_issue_pending - starts pending transactions
|
||||
+ * @chan: dma channel
|
||||
+ *
|
||||
+ * Issues all pending transactions and starts DMA
|
||||
+ */
|
||||
+static void adm_issue_pending(struct dma_chan *chan)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+
|
||||
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
|
||||
+ adm_start_dma(achan);
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_dma_free_desc - free descriptor memory
|
||||
+ * @vd: virtual descriptor
|
||||
+ *
|
||||
+ */
|
||||
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
|
||||
+{
|
||||
+ struct adm_async_desc *async_desc = container_of(vd,
|
||||
+ struct adm_async_desc, vd);
|
||||
+
|
||||
+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
|
||||
+ async_desc->dma_len, DMA_TO_DEVICE);
|
||||
+ kfree(async_desc->cpl);
|
||||
+ kfree(async_desc);
|
||||
+}
|
||||
+
|
||||
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
|
||||
+ u32 index)
|
||||
+{
|
||||
+ achan->id = index;
|
||||
+ achan->adev = adev;
|
||||
+
|
||||
+ vchan_init(&achan->vc, &adev->common);
|
||||
+ achan->vc.desc_free = adm_dma_free_desc;
|
||||
+}
|
||||
+
|
||||
+static int adm_dma_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct adm_device *adev;
|
||||
+ int ret;
|
||||
+ u32 i;
|
||||
+
|
||||
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
|
||||
+ if (!adev)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ adev->dev = &pdev->dev;
|
||||
+
|
||||
+ adev->regs = devm_platform_ioremap_resource(pdev, 0);
|
||||
+ if (IS_ERR(adev->regs))
|
||||
+ return PTR_ERR(adev->regs);
|
||||
+
|
||||
+ adev->irq = platform_get_irq(pdev, 0);
|
||||
+ if (adev->irq < 0)
|
||||
+ return adev->irq;
|
||||
+
|
||||
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "Execution environment unspecified\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ adev->core_clk = devm_clk_get(adev->dev, "core");
|
||||
+ if (IS_ERR(adev->core_clk))
|
||||
+ return PTR_ERR(adev->core_clk);
|
||||
+
|
||||
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
|
||||
+ if (IS_ERR(adev->iface_clk))
|
||||
+ return PTR_ERR(adev->iface_clk);
|
||||
+
|
||||
+ adev->clk_reset = devm_reset_control_get_exclusive(&pdev->dev, "clk");
|
||||
+ if (IS_ERR(adev->clk_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
|
||||
+ return PTR_ERR(adev->clk_reset);
|
||||
+ }
|
||||
+
|
||||
+ adev->c0_reset = devm_reset_control_get_exclusive(&pdev->dev, "c0");
|
||||
+ if (IS_ERR(adev->c0_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
|
||||
+ return PTR_ERR(adev->c0_reset);
|
||||
+ }
|
||||
+
|
||||
+ adev->c1_reset = devm_reset_control_get_exclusive(&pdev->dev, "c1");
|
||||
+ if (IS_ERR(adev->c1_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
|
||||
+ return PTR_ERR(adev->c1_reset);
|
||||
+ }
|
||||
+
|
||||
+ adev->c2_reset = devm_reset_control_get_exclusive(&pdev->dev, "c2");
|
||||
+ if (IS_ERR(adev->c2_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
|
||||
+ return PTR_ERR(adev->c2_reset);
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(adev->core_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(adev->iface_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
|
||||
+ goto err_disable_core_clk;
|
||||
+ }
|
||||
+
|
||||
+ reset_control_assert(adev->clk_reset);
|
||||
+ reset_control_assert(adev->c0_reset);
|
||||
+ reset_control_assert(adev->c1_reset);
|
||||
+ reset_control_assert(adev->c2_reset);
|
||||
+
|
||||
+ udelay(2);
|
||||
+
|
||||
+ reset_control_deassert(adev->clk_reset);
|
||||
+ reset_control_deassert(adev->c0_reset);
|
||||
+ reset_control_deassert(adev->c1_reset);
|
||||
+ reset_control_deassert(adev->c2_reset);
|
||||
+
|
||||
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
|
||||
+ sizeof(*adev->channels), GFP_KERNEL);
|
||||
+
|
||||
+ if (!adev->channels) {
|
||||
+ ret = -ENOMEM;
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ /* allocate and initialize channels */
|
||||
+ INIT_LIST_HEAD(&adev->common.channels);
|
||||
+
|
||||
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
|
||||
+ adm_channel_init(adev, &adev->channels[i], i);
|
||||
+
|
||||
+ /* reset CRCIs */
|
||||
+ for (i = 0; i < 16; i++)
|
||||
+ writel(ADM_CRCI_CTL_RST, adev->regs +
|
||||
+ ADM_CRCI_CTL(i, adev->ee));
|
||||
+
|
||||
+ /* configure client interfaces */
|
||||
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
|
||||
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
|
||||
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
|
||||
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
|
||||
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
|
||||
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
|
||||
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
|
||||
+ adev->regs + ADM_GP_CTL);
|
||||
+
|
||||
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
|
||||
+ 0, "adm_dma", adev);
|
||||
+ if (ret)
|
||||
+ goto err_disable_clks;
|
||||
+
|
||||
+ platform_set_drvdata(pdev, adev);
|
||||
+
|
||||
+ adev->common.dev = adev->dev;
|
||||
+ adev->common.dev->dma_parms = &adev->dma_parms;
|
||||
+
|
||||
+ /* set capabilities */
|
||||
+ dma_cap_zero(adev->common.cap_mask);
|
||||
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
|
||||
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
|
||||
+
|
||||
+ /* initialize dmaengine apis */
|
||||
+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
|
||||
+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
|
||||
+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||||
+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||||
+ adev->common.device_free_chan_resources = adm_free_chan;
|
||||
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
|
||||
+ adev->common.device_issue_pending = adm_issue_pending;
|
||||
+ adev->common.device_tx_status = adm_tx_status;
|
||||
+ adev->common.device_terminate_all = adm_terminate_all;
|
||||
+ adev->common.device_config = adm_slave_config;
|
||||
+
|
||||
+ ret = dma_async_device_register(&adev->common);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "failed to register dma async device\n");
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ ret = of_dma_controller_register(pdev->dev.of_node,
|
||||
+ of_dma_xlate_by_chan_id,
|
||||
+ &adev->common);
|
||||
+ if (ret)
|
||||
+ goto err_unregister_dma;
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_unregister_dma:
|
||||
+ dma_async_device_unregister(&adev->common);
|
||||
+err_disable_clks:
|
||||
+ clk_disable_unprepare(adev->iface_clk);
|
||||
+err_disable_core_clk:
|
||||
+ clk_disable_unprepare(adev->core_clk);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int adm_dma_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct adm_device *adev = platform_get_drvdata(pdev);
|
||||
+ struct adm_chan *achan;
|
||||
+ u32 i;
|
||||
+
|
||||
+ of_dma_controller_free(pdev->dev.of_node);
|
||||
+ dma_async_device_unregister(&adev->common);
|
||||
+
|
||||
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
|
||||
+ achan = &adev->channels[i];
|
||||
+
|
||||
+ /* mask IRQs for this channel/EE pair */
|
||||
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
|
||||
+
|
||||
+ tasklet_kill(&adev->channels[i].vc.task);
|
||||
+ adm_terminate_all(&adev->channels[i].vc.chan);
|
||||
+ }
|
||||
+
|
||||
+ devm_free_irq(adev->dev, adev->irq, adev);
|
||||
+
|
||||
+ clk_disable_unprepare(adev->core_clk);
|
||||
+ clk_disable_unprepare(adev->iface_clk);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id adm_of_match[] = {
|
||||
+ { .compatible = "qcom,adm", },
|
||||
+ {}
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, adm_of_match);
|
||||
+
|
||||
+static struct platform_driver adm_dma_driver = {
|
||||
+ .probe = adm_dma_probe,
|
||||
+ .remove = adm_dma_remove,
|
||||
+ .driver = {
|
||||
+ .name = "adm-dma-engine",
|
||||
+ .of_match_table = adm_of_match,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(adm_dma_driver);
|
||||
+
|
||||
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
||||
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
|
@ -0,0 +1,217 @@
|
|||
From 803eb124e1a64e42888542c3444bfe6dac412c7f Mon Sep 17 00:00:00 2001
|
||||
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
Date: Mon, 4 Jan 2021 09:41:35 +0530
|
||||
Subject: mtd: parsers: Add Qcom SMEM parser
|
||||
|
||||
NAND based Qualcomm platforms have the partition table populated in the
|
||||
Shared Memory (SMEM). Hence, add a parser for parsing the partitions
|
||||
from it.
|
||||
|
||||
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
||||
Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadhasivam@linaro.org
|
||||
---
|
||||
drivers/mtd/parsers/Kconfig | 8 ++
|
||||
drivers/mtd/parsers/Makefile | 1 +
|
||||
drivers/mtd/parsers/qcomsmempart.c | 170 +++++++++++++++++++++++++++++++++++++
|
||||
3 files changed, 179 insertions(+)
|
||||
create mode 100644 drivers/mtd/parsers/qcomsmempart.c
|
||||
|
||||
--- a/drivers/mtd/parsers/Kconfig
|
||||
+++ b/drivers/mtd/parsers/Kconfig
|
||||
@@ -196,6 +196,14 @@ config MTD_REDBOOT_PARTS_READONLY
|
||||
|
||||
endif # MTD_REDBOOT_PARTS
|
||||
|
||||
+config MTD_QCOMSMEM_PARTS
|
||||
+ tristate "Qualcomm SMEM NAND flash partition parser"
|
||||
+ depends on MTD_NAND_QCOM || COMPILE_TEST
|
||||
+ depends on QCOM_SMEM
|
||||
+ help
|
||||
+ This provides support for parsing partitions from Shared Memory (SMEM)
|
||||
+ for NAND flash on Qualcomm platforms.
|
||||
+
|
||||
config MTD_ROUTERBOOT_PARTS
|
||||
tristate "RouterBoot flash partition parser"
|
||||
depends on MTD && OF
|
||||
--- a/drivers/mtd/parsers/Makefile
|
||||
+++ b/drivers/mtd/parsers/Makefile
|
||||
@@ -13,4 +13,5 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
|
||||
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
+obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o
|
||||
obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/mtd/parsers/qcomsmempart.c
|
||||
@@ -0,0 +1,170 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0-only
|
||||
+/*
|
||||
+ * Qualcomm SMEM NAND flash partition parser
|
||||
+ *
|
||||
+ * Copyright (C) 2020, Linaro Ltd.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/ctype.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/mtd/mtd.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/soc/qcom/smem.h>
|
||||
+
|
||||
+#define SMEM_AARM_PARTITION_TABLE 9
|
||||
+#define SMEM_APPS 0
|
||||
+
|
||||
+#define SMEM_FLASH_PART_MAGIC1 0x55ee73aa
|
||||
+#define SMEM_FLASH_PART_MAGIC2 0xe35ebddb
|
||||
+#define SMEM_FLASH_PTABLE_V3 3
|
||||
+#define SMEM_FLASH_PTABLE_V4 4
|
||||
+#define SMEM_FLASH_PTABLE_MAX_PARTS_V3 16
|
||||
+#define SMEM_FLASH_PTABLE_MAX_PARTS_V4 48
|
||||
+#define SMEM_FLASH_PTABLE_HDR_LEN (4 * sizeof(u32))
|
||||
+#define SMEM_FLASH_PTABLE_NAME_SIZE 16
|
||||
+
|
||||
+/**
|
||||
+ * struct smem_flash_pentry - SMEM Flash partition entry
|
||||
+ * @name: Name of the partition
|
||||
+ * @offset: Offset in blocks
|
||||
+ * @length: Length of the partition in blocks
|
||||
+ * @attr: Flags for this partition
|
||||
+ */
|
||||
+struct smem_flash_pentry {
|
||||
+ char name[SMEM_FLASH_PTABLE_NAME_SIZE];
|
||||
+ __le32 offset;
|
||||
+ __le32 length;
|
||||
+ u8 attr;
|
||||
+} __packed __aligned(4);
|
||||
+
|
||||
+/**
|
||||
+ * struct smem_flash_ptable - SMEM Flash partition table
|
||||
+ * @magic1: Partition table Magic 1
|
||||
+ * @magic2: Partition table Magic 2
|
||||
+ * @version: Partition table version
|
||||
+ * @numparts: Number of partitions in this ptable
|
||||
+ * @pentry: Flash partition entries belonging to this ptable
|
||||
+ */
|
||||
+struct smem_flash_ptable {
|
||||
+ __le32 magic1;
|
||||
+ __le32 magic2;
|
||||
+ __le32 version;
|
||||
+ __le32 numparts;
|
||||
+ struct smem_flash_pentry pentry[SMEM_FLASH_PTABLE_MAX_PARTS_V4];
|
||||
+} __packed __aligned(4);
|
||||
+
|
||||
+static int parse_qcomsmem_part(struct mtd_info *mtd,
|
||||
+ const struct mtd_partition **pparts,
|
||||
+ struct mtd_part_parser_data *data)
|
||||
+{
|
||||
+ struct smem_flash_pentry *pentry;
|
||||
+ struct smem_flash_ptable *ptable;
|
||||
+ size_t len = SMEM_FLASH_PTABLE_HDR_LEN;
|
||||
+ struct mtd_partition *parts;
|
||||
+ int ret, i, numparts;
|
||||
+ char *name, *c;
|
||||
+
|
||||
+ pr_debug("Parsing partition table info from SMEM\n");
|
||||
+ ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
|
||||
+ if (IS_ERR(ptable)) {
|
||||
+ pr_err("Error reading partition table header\n");
|
||||
+ return PTR_ERR(ptable);
|
||||
+ }
|
||||
+
|
||||
+ /* Verify ptable magic */
|
||||
+ if (le32_to_cpu(ptable->magic1) != SMEM_FLASH_PART_MAGIC1 ||
|
||||
+ le32_to_cpu(ptable->magic2) != SMEM_FLASH_PART_MAGIC2) {
|
||||
+ pr_err("Partition table magic verification failed\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ /* Ensure that # of partitions is less than the max we have allocated */
|
||||
+ numparts = le32_to_cpu(ptable->numparts);
|
||||
+ if (numparts > SMEM_FLASH_PTABLE_MAX_PARTS_V4) {
|
||||
+ pr_err("Partition numbers exceed the max limit\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ /* Find out length of partition data based on table version */
|
||||
+ if (le32_to_cpu(ptable->version) <= SMEM_FLASH_PTABLE_V3) {
|
||||
+ len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V3 *
|
||||
+ sizeof(struct smem_flash_pentry);
|
||||
+ } else if (le32_to_cpu(ptable->version) == SMEM_FLASH_PTABLE_V4) {
|
||||
+ len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V4 *
|
||||
+ sizeof(struct smem_flash_pentry);
|
||||
+ } else {
|
||||
+ pr_err("Unknown ptable version (%d)", le32_to_cpu(ptable->version));
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Now that the partition table header has been parsed, verified
|
||||
+ * and the length of the partition table calculated, read the
|
||||
+ * complete partition table
|
||||
+ */
|
||||
+ ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
|
||||
+ if (IS_ERR_OR_NULL(ptable)) {
|
||||
+ pr_err("Error reading partition table\n");
|
||||
+ return PTR_ERR(ptable);
|
||||
+ }
|
||||
+
|
||||
+ parts = kcalloc(numparts, sizeof(*parts), GFP_KERNEL);
|
||||
+ if (!parts)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ for (i = 0; i < numparts; i++) {
|
||||
+ pentry = &ptable->pentry[i];
|
||||
+ if (pentry->name[0] == '\0')
|
||||
+ continue;
|
||||
+
|
||||
+ name = kstrdup(pentry->name, GFP_KERNEL);
|
||||
+ if (!name) {
|
||||
+ ret = -ENOMEM;
|
||||
+ goto out_free_parts;
|
||||
+ }
|
||||
+
|
||||
+ /* Convert name to lower case */
|
||||
+ for (c = name; *c != '\0'; c++)
|
||||
+ *c = tolower(*c);
|
||||
+
|
||||
+ parts[i].name = name;
|
||||
+ parts[i].offset = le32_to_cpu(pentry->offset) * mtd->erasesize;
|
||||
+ parts[i].mask_flags = pentry->attr;
|
||||
+ parts[i].size = le32_to_cpu(pentry->length) * mtd->erasesize;
|
||||
+ pr_debug("%d: %s offs=0x%08x size=0x%08x attr:0x%08x\n",
|
||||
+ i, pentry->name, le32_to_cpu(pentry->offset),
|
||||
+ le32_to_cpu(pentry->length), pentry->attr);
|
||||
+ }
|
||||
+
|
||||
+ pr_debug("SMEM partition table found: ver: %d len: %d\n",
|
||||
+ le32_to_cpu(ptable->version), numparts);
|
||||
+ *pparts = parts;
|
||||
+
|
||||
+ return numparts;
|
||||
+
|
||||
+out_free_parts:
|
||||
+ while (--i >= 0)
|
||||
+ kfree(parts[i].name);
|
||||
+ kfree(parts);
|
||||
+ *pparts = NULL;
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id qcomsmem_of_match_table[] = {
|
||||
+ { .compatible = "qcom,smem-part" },
|
||||
+ {},
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, qcomsmem_of_match_table);
|
||||
+
|
||||
+static struct mtd_part_parser mtd_parser_qcomsmem = {
|
||||
+ .parse_fn = parse_qcomsmem_part,
|
||||
+ .name = "qcomsmem",
|
||||
+ .of_match_table = qcomsmem_of_match_table,
|
||||
+};
|
||||
+module_mtd_part_parser(mtd_parser_qcomsmem);
|
||||
+
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
|
||||
+MODULE_DESCRIPTION("Qualcomm SMEM NAND flash partition parser");
|
|
@ -63,7 +63,7 @@
|
|||
|
||||
val = stmmac_get_platform_resources(pdev, &stmmac_res);
|
||||
if (val)
|
||||
@@ -346,6 +388,17 @@ static int ipq806x_gmac_probe(struct pla
|
||||
@@ -339,6 +381,17 @@ static int ipq806x_gmac_probe(struct pla
|
||||
0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
|
||||
0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
|
||||
0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET);
|
|
@ -17,7 +17,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -1088,7 +1088,7 @@
|
||||
@@ -1163,7 +1163,7 @@
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
|
@ -26,7 +26,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
|
||||
|
||||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -1139,7 +1139,7 @@
|
||||
@@ -1214,7 +1214,7 @@
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
|
@ -35,7 +35,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|||
0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
|
||||
|
||||
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -1190,7 +1190,7 @@
|
||||
@@ -1265,7 +1265,7 @@
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
|
@ -0,0 +1,285 @@
|
|||
From 5c7d1181056feef0b58fb2f556f55e170ba5b479 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Sat, 25 Jul 2020 19:14:59 +0200
|
||||
Subject: [PATCH 01/10] drivers: thermal: tsens: Add VER_0 tsens version
|
||||
|
||||
VER_0 is used to describe device based on tsens version before v0.1.
|
||||
These device are devices based on msm8960 for example apq8064 or
|
||||
ipq806x.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
Reported-by: kernel test robot <lkp@intel.com>
|
||||
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
|
||||
---
|
||||
drivers/thermal/qcom/tsens.c | 150 ++++++++++++++++++++++++++++-------
|
||||
drivers/thermal/qcom/tsens.h | 4 +-
|
||||
2 files changed, 124 insertions(+), 30 deletions(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens.c
|
||||
+++ b/drivers/thermal/qcom/tsens.c
|
||||
@@ -12,6 +12,7 @@
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/of_platform.h>
|
||||
+#include <linux/mfd/syscon.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/regmap.h>
|
||||
@@ -515,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int
|
||||
dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
|
||||
hw_id, __func__, temp);
|
||||
}
|
||||
+
|
||||
+ if (tsens_version(priv) < VER_0_1) {
|
||||
+ /* Constraint: There is only 1 interrupt control register for all
|
||||
+ * 11 temperature sensor. So monitoring more than 1 sensor based
|
||||
+ * on interrupts will yield inconsistent result. To overcome this
|
||||
+ * issue we will monitor only sensor 0 which is the master sensor.
|
||||
+ */
|
||||
+ break;
|
||||
+ }
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
@@ -530,6 +540,13 @@ static int tsens_set_trips(void *_sensor
|
||||
int high_val, low_val, cl_high, cl_low;
|
||||
u32 hw_id = s->hw_id;
|
||||
|
||||
+ if (tsens_version(priv) < VER_0_1) {
|
||||
+ /* Pre v0.1 IP had a single register for each type of interrupt
|
||||
+ * and thresholds
|
||||
+ */
|
||||
+ hw_id = 0;
|
||||
+ }
|
||||
+
|
||||
dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
|
||||
hw_id, __func__, low, high);
|
||||
|
||||
@@ -584,18 +601,21 @@ int get_temp_tsens_valid(const struct ts
|
||||
u32 valid;
|
||||
int ret;
|
||||
|
||||
- ret = regmap_field_read(priv->rf[valid_idx], &valid);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
- while (!valid) {
|
||||
- /* Valid bit is 0 for 6 AHB clock cycles.
|
||||
- * At 19.2MHz, 1 AHB clock is ~60ns.
|
||||
- * We should enter this loop very, very rarely.
|
||||
- */
|
||||
- ndelay(400);
|
||||
+ /* VER_0 doesn't have VALID bit */
|
||||
+ if (tsens_version(priv) >= VER_0_1) {
|
||||
ret = regmap_field_read(priv->rf[valid_idx], &valid);
|
||||
if (ret)
|
||||
return ret;
|
||||
+ while (!valid) {
|
||||
+ /* Valid bit is 0 for 6 AHB clock cycles.
|
||||
+ * At 19.2MHz, 1 AHB clock is ~60ns.
|
||||
+ * We should enter this loop very, very rarely.
|
||||
+ */
|
||||
+ ndelay(400);
|
||||
+ ret = regmap_field_read(priv->rf[valid_idx], &valid);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ }
|
||||
}
|
||||
|
||||
/* Valid bit is set, OK to read the temperature */
|
||||
@@ -608,15 +628,29 @@ int get_temp_common(const struct tsens_s
|
||||
{
|
||||
struct tsens_priv *priv = s->priv;
|
||||
int hw_id = s->hw_id;
|
||||
- int last_temp = 0, ret;
|
||||
+ int last_temp = 0, ret, trdy;
|
||||
+ unsigned long timeout;
|
||||
|
||||
- ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
|
||||
+ do {
|
||||
+ if (tsens_version(priv) == VER_0) {
|
||||
+ ret = regmap_field_read(priv->rf[TRDY], &trdy);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ if (!trdy)
|
||||
+ continue;
|
||||
+ }
|
||||
|
||||
- *temp = code_to_degc(last_temp, s) * 1000;
|
||||
+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
|
||||
- return 0;
|
||||
+ *temp = code_to_degc(last_temp, s) * 1000;
|
||||
+
|
||||
+ return 0;
|
||||
+ } while (time_before(jiffies, timeout));
|
||||
+
|
||||
+ return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
@@ -738,19 +772,34 @@ int __init init_common(struct tsens_priv
|
||||
priv->tm_offset = 0x1000;
|
||||
}
|
||||
|
||||
- res = platform_get_resource(op, IORESOURCE_MEM, 0);
|
||||
- tm_base = devm_ioremap_resource(dev, res);
|
||||
- if (IS_ERR(tm_base)) {
|
||||
- ret = PTR_ERR(tm_base);
|
||||
- goto err_put_device;
|
||||
+ if (tsens_version(priv) >= VER_0_1) {
|
||||
+ res = platform_get_resource(op, IORESOURCE_MEM, 0);
|
||||
+ tm_base = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(tm_base)) {
|
||||
+ ret = PTR_ERR(tm_base);
|
||||
+ goto err_put_device;
|
||||
+ }
|
||||
+
|
||||
+ priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
|
||||
+ } else { /* VER_0 share the same gcc regs using a syscon */
|
||||
+ struct device *parent = priv->dev->parent;
|
||||
+
|
||||
+ if (parent)
|
||||
+ priv->tm_map = syscon_node_to_regmap(parent->of_node);
|
||||
}
|
||||
|
||||
- priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
|
||||
- if (IS_ERR(priv->tm_map)) {
|
||||
- ret = PTR_ERR(priv->tm_map);
|
||||
+ if (IS_ERR_OR_NULL(priv->tm_map)) {
|
||||
+ if (!priv->tm_map)
|
||||
+ ret = -ENODEV;
|
||||
+ else
|
||||
+ ret = PTR_ERR(priv->tm_map);
|
||||
goto err_put_device;
|
||||
}
|
||||
|
||||
+ /* VER_0 have only tm_map */
|
||||
+ if (!priv->srot_map)
|
||||
+ priv->srot_map = priv->tm_map;
|
||||
+
|
||||
if (tsens_version(priv) > VER_0_1) {
|
||||
for (i = VER_MAJOR; i <= VER_STEP; i++) {
|
||||
priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
|
||||
@@ -771,6 +820,10 @@ int __init init_common(struct tsens_priv
|
||||
ret = PTR_ERR(priv->rf[TSENS_EN]);
|
||||
goto err_put_device;
|
||||
}
|
||||
+ /* in VER_0 TSENS need to be explicitly enabled */
|
||||
+ if (tsens_version(priv) == VER_0)
|
||||
+ regmap_field_write(priv->rf[TSENS_EN], 1);
|
||||
+
|
||||
ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
|
||||
if (ret)
|
||||
goto err_put_device;
|
||||
@@ -793,6 +846,19 @@ int __init init_common(struct tsens_priv
|
||||
goto err_put_device;
|
||||
}
|
||||
|
||||
+ priv->rf[TSENS_SW_RST] =
|
||||
+ devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
|
||||
+ if (IS_ERR(priv->rf[TSENS_SW_RST])) {
|
||||
+ ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
|
||||
+ goto err_put_device;
|
||||
+ }
|
||||
+
|
||||
+ priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
|
||||
+ if (IS_ERR(priv->rf[TRDY])) {
|
||||
+ ret = PTR_ERR(priv->rf[TRDY]);
|
||||
+ goto err_put_device;
|
||||
+ }
|
||||
+
|
||||
/* This loop might need changes if enum regfield_ids is reordered */
|
||||
for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
|
||||
for (i = 0; i < priv->feat->max_sensors; i++) {
|
||||
@@ -808,7 +874,7 @@ int __init init_common(struct tsens_priv
|
||||
}
|
||||
}
|
||||
|
||||
- if (priv->feat->crit_int) {
|
||||
+ if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
|
||||
/* Loop might need changes if enum regfield_ids is reordered */
|
||||
for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
|
||||
for (i = 0; i < priv->feat->max_sensors; i++) {
|
||||
@@ -846,7 +912,11 @@ int __init init_common(struct tsens_priv
|
||||
}
|
||||
|
||||
spin_lock_init(&priv->ul_lock);
|
||||
- tsens_enable_irq(priv);
|
||||
+
|
||||
+ /* VER_0 interrupt doesn't need to be enabled */
|
||||
+ if (tsens_version(priv) >= VER_0_1)
|
||||
+ tsens_enable_irq(priv);
|
||||
+
|
||||
tsens_debug_init(op);
|
||||
|
||||
err_put_device:
|
||||
@@ -945,10 +1015,19 @@ static int tsens_register_irq(struct tse
|
||||
if (irq == -ENXIO)
|
||||
ret = 0;
|
||||
} else {
|
||||
- ret = devm_request_threaded_irq(&pdev->dev, irq,
|
||||
- NULL, thread_fn,
|
||||
- IRQF_ONESHOT,
|
||||
- dev_name(&pdev->dev), priv);
|
||||
+ /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
|
||||
+ if (tsens_version(priv) == VER_0)
|
||||
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
|
||||
+ thread_fn, NULL,
|
||||
+ IRQF_TRIGGER_RISING,
|
||||
+ dev_name(&pdev->dev),
|
||||
+ priv);
|
||||
+ else
|
||||
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
|
||||
+ thread_fn, IRQF_ONESHOT,
|
||||
+ dev_name(&pdev->dev),
|
||||
+ priv);
|
||||
+
|
||||
if (ret)
|
||||
dev_err(&pdev->dev, "%s: failed to get irq\n",
|
||||
__func__);
|
||||
@@ -977,6 +1056,19 @@ static int tsens_register(struct tsens_p
|
||||
priv->ops->enable(priv, i);
|
||||
}
|
||||
|
||||
+ /* VER_0 require to set MIN and MAX THRESH
|
||||
+ * These 2 regs are set using the:
|
||||
+ * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
|
||||
+ * - CRIT_THRESH_1 for MIN THRESH hardcoded to 0°C
|
||||
+ */
|
||||
+ if (tsens_version(priv) < VER_0_1) {
|
||||
+ regmap_field_write(priv->rf[CRIT_THRESH_0],
|
||||
+ tsens_mC_to_hw(priv->sensor, 120000));
|
||||
+
|
||||
+ regmap_field_write(priv->rf[CRIT_THRESH_1],
|
||||
+ tsens_mC_to_hw(priv->sensor, 0));
|
||||
+ }
|
||||
+
|
||||
ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
--- a/drivers/thermal/qcom/tsens.h
|
||||
+++ b/drivers/thermal/qcom/tsens.h
|
||||
@@ -13,6 +13,7 @@
|
||||
#define CAL_DEGC_PT2 120
|
||||
#define SLOPE_FACTOR 1000
|
||||
#define SLOPE_DEFAULT 3200
|
||||
+#define TIMEOUT_US 100
|
||||
#define THRESHOLD_MAX_ADC_CODE 0x3ff
|
||||
#define THRESHOLD_MIN_ADC_CODE 0x0
|
||||
|
||||
@@ -25,7 +26,8 @@ struct tsens_priv;
|
||||
|
||||
/* IP version numbers in ascending order */
|
||||
enum tsens_ver {
|
||||
- VER_0_1 = 0,
|
||||
+ VER_0 = 0,
|
||||
+ VER_0_1,
|
||||
VER_1_X,
|
||||
VER_2_X,
|
||||
};
|
|
@ -0,0 +1,28 @@
|
|||
From efa0d50a6c5ec7619371dfe4d3e6ca54b73787d5 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 25 Nov 2020 16:47:21 +0100
|
||||
Subject: [PATCH 02/10] drivers: thermal: tsens: Don't hardcode sensor slope
|
||||
|
||||
Function compute_intercept_slope hardcode the sensor slope to
|
||||
SLOPE_DEFAULT. Change this and use the default value only if a slope is
|
||||
not defined. This is needed for tsens VER_0 that has a hardcoded slope
|
||||
table.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens.c | 3 ++-
|
||||
1 file changed, 2 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens.c
|
||||
+++ b/drivers/thermal/qcom/tsens.c
|
||||
@@ -86,7 +86,8 @@ void compute_intercept_slope(struct tsen
|
||||
"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
|
||||
__func__, i, p1[i], p2[i]);
|
||||
|
||||
- priv->sensor[i].slope = SLOPE_DEFAULT;
|
||||
+ if (!priv->sensor[i].slope)
|
||||
+ priv->sensor[i].slope = SLOPE_DEFAULT;
|
||||
if (mode == TWO_PT_CALIB) {
|
||||
/*
|
||||
* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
|
|
@ -0,0 +1,119 @@
|
|||
From 6bac2e2fa36c2d7c304768a689d8b73155b90aa2 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 25 Nov 2020 17:15:51 +0100
|
||||
Subject: [PATCH 03/10] drivers: thermal: tsens: Convert msm8960 to reg_field
|
||||
|
||||
Convert msm9860 driver to reg_field to use the init_common
|
||||
function.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens-8960.c | 80 ++++++++++++++++++++++++++++++-
|
||||
1 file changed, 79 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens-8960.c
|
||||
+++ b/drivers/thermal/qcom/tsens-8960.c
|
||||
@@ -51,11 +51,22 @@
|
||||
#define MIN_LIMIT_TH 0x0
|
||||
#define MAX_LIMIT_TH 0xff
|
||||
|
||||
-#define S0_STATUS_ADDR 0x3628
|
||||
#define INT_STATUS_ADDR 0x363c
|
||||
#define TRDY_MASK BIT(7)
|
||||
#define TIMEOUT_US 100
|
||||
|
||||
+#define S0_STATUS_OFF 0x3628
|
||||
+#define S1_STATUS_OFF 0x362c
|
||||
+#define S2_STATUS_OFF 0x3630
|
||||
+#define S3_STATUS_OFF 0x3634
|
||||
+#define S4_STATUS_OFF 0x3638
|
||||
+#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */
|
||||
+#define S6_STATUS_OFF 0x3668
|
||||
+#define S7_STATUS_OFF 0x366c
|
||||
+#define S8_STATUS_OFF 0x3670
|
||||
+#define S9_STATUS_OFF 0x3674
|
||||
+#define S10_STATUS_OFF 0x3678
|
||||
+
|
||||
static int suspend_8960(struct tsens_priv *priv)
|
||||
{
|
||||
int ret;
|
||||
@@ -269,6 +280,71 @@ static int get_temp_8960(const struct ts
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
+static struct tsens_features tsens_8960_feat = {
|
||||
+ .ver_major = VER_0,
|
||||
+ .crit_int = 0,
|
||||
+ .adc = 1,
|
||||
+ .srot_split = 0,
|
||||
+ .max_sensors = 11,
|
||||
+};
|
||||
+
|
||||
+static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
|
||||
+ /* ----- SROT ------ */
|
||||
+ /* No VERSION information */
|
||||
+
|
||||
+ /* CNTL */
|
||||
+ [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0),
|
||||
+ [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1),
|
||||
+ /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
|
||||
+ [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7),
|
||||
+
|
||||
+ /* ----- TM ------ */
|
||||
+ /* INTERRUPT ENABLE */
|
||||
+ /* NO INTERRUPT ENABLE */
|
||||
+
|
||||
+ /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
|
||||
+ [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7),
|
||||
+ [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15),
|
||||
+ /* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
|
||||
+ * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
|
||||
+ * MIN_THRESH_0 -> CRIT_THRESH_1
|
||||
+ * MAX_THRESH_0 -> CRIT_THRESH_0
|
||||
+ */
|
||||
+ [CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23),
|
||||
+ [CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31),
|
||||
+
|
||||
+ /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
|
||||
+ /* 1 == clear, 0 == normal operation */
|
||||
+ [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9),
|
||||
+ [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10),
|
||||
+
|
||||
+ /* NO CRITICAL INTERRUPT SUPPORT on 8960 */
|
||||
+
|
||||
+ /* Sn_STATUS */
|
||||
+ [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7),
|
||||
+ [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7),
|
||||
+
|
||||
+ /* No VALID field on 8960 */
|
||||
+ /* TSENS_INT_STATUS bits: 1 == threshold violated */
|
||||
+ [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
|
||||
+ [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
|
||||
+ [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
|
||||
+ /* No CRITICAL field on 8960 */
|
||||
+ [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
|
||||
+
|
||||
+ /* TRDY: 1=ready, 0=in progress */
|
||||
+ [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
|
||||
+};
|
||||
+
|
||||
static const struct tsens_ops ops_8960 = {
|
||||
.init = init_8960,
|
||||
.calibrate = calibrate_8960,
|
||||
@@ -282,4 +358,6 @@ static const struct tsens_ops ops_8960 =
|
||||
struct tsens_plat_data data_8960 = {
|
||||
.num_sensors = 11,
|
||||
.ops = &ops_8960,
|
||||
+ .feat = &tsens_8960_feat,
|
||||
+ .fields = tsens_8960_regfields,
|
||||
};
|
|
@ -0,0 +1,81 @@
|
|||
From c04f98a496929f75d75c65115d5717423c3d0634 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 25 Nov 2020 17:16:36 +0100
|
||||
Subject: [PATCH 04/10] drivers: thermal: tsens: Use init_common for msm8960
|
||||
|
||||
Use init_common and drop custom init for msm8960.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
|
||||
1 file changed, 1 insertion(+), 51 deletions(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens-8960.c
|
||||
+++ b/drivers/thermal/qcom/tsens-8960.c
|
||||
@@ -173,56 +173,6 @@ static void disable_8960(struct tsens_pr
|
||||
regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
|
||||
}
|
||||
|
||||
-static int init_8960(struct tsens_priv *priv)
|
||||
-{
|
||||
- int ret, i;
|
||||
- u32 reg_cntl;
|
||||
-
|
||||
- priv->tm_map = dev_get_regmap(priv->dev, NULL);
|
||||
- if (!priv->tm_map)
|
||||
- return -ENODEV;
|
||||
-
|
||||
- /*
|
||||
- * The status registers for each sensor are discontiguous
|
||||
- * because some SoCs have 5 sensors while others have more
|
||||
- * but the control registers stay in the same place, i.e
|
||||
- * directly after the first 5 status registers.
|
||||
- */
|
||||
- for (i = 0; i < priv->num_sensors; i++) {
|
||||
- if (i >= 5)
|
||||
- priv->sensor[i].status = S0_STATUS_ADDR + 40;
|
||||
- priv->sensor[i].status += i * 4;
|
||||
- }
|
||||
-
|
||||
- reg_cntl = SW_RST;
|
||||
- ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
-
|
||||
- if (priv->num_sensors > 1) {
|
||||
- reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
|
||||
- reg_cntl &= ~SW_RST;
|
||||
- ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
|
||||
- CONFIG_MASK, CONFIG);
|
||||
- } else {
|
||||
- reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
|
||||
- reg_cntl &= ~CONFIG_MASK_8660;
|
||||
- reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
|
||||
- }
|
||||
-
|
||||
- reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
|
||||
- ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
-
|
||||
- reg_cntl |= EN;
|
||||
- ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
-
|
||||
- return 0;
|
||||
-}
|
||||
-
|
||||
static int calibrate_8960(struct tsens_priv *priv)
|
||||
{
|
||||
int i;
|
||||
@@ -346,7 +296,7 @@ static const struct reg_field tsens_8960
|
||||
};
|
||||
|
||||
static const struct tsens_ops ops_8960 = {
|
||||
- .init = init_8960,
|
||||
+ .init = init_common,
|
||||
.calibrate = calibrate_8960,
|
||||
.get_temp = get_temp_8960,
|
||||
.enable = enable_8960,
|
|
@ -0,0 +1,66 @@
|
|||
From b3e8bd33b84a6b6c863bd1733bd15b5f1483b8ab Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 25 Nov 2020 17:06:55 +0100
|
||||
Subject: [PATCH 05/10] drivers: thermal: tsens: Fix bug in sensor enable for
|
||||
msm8960
|
||||
|
||||
Device based on tsens VER_0 contains a hardware bug that results in some
|
||||
problem with sensor enablement. Sensor id 6-11 can't be enabled
|
||||
selectively and all of them must be enabled in one step.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens-8960.c | 23 ++++++++++++++++++++---
|
||||
1 file changed, 20 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens-8960.c
|
||||
+++ b/drivers/thermal/qcom/tsens-8960.c
|
||||
@@ -27,9 +27,9 @@
|
||||
#define EN BIT(0)
|
||||
#define SW_RST BIT(1)
|
||||
#define SENSOR0_EN BIT(3)
|
||||
+#define MEASURE_PERIOD BIT(18)
|
||||
#define SLP_CLK_ENA BIT(26)
|
||||
#define SLP_CLK_ENA_8660 BIT(24)
|
||||
-#define MEASURE_PERIOD 1
|
||||
#define SENSOR0_SHIFT 3
|
||||
|
||||
/* INT_STATUS_ADDR bitmasks */
|
||||
@@ -126,17 +126,34 @@ static int resume_8960(struct tsens_priv
|
||||
static int enable_8960(struct tsens_priv *priv, int id)
|
||||
{
|
||||
int ret;
|
||||
- u32 reg, mask;
|
||||
+ u32 reg, mask = BIT(id);
|
||||
|
||||
ret = regmap_read(priv->tm_map, CNTL_ADDR, ®);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
- mask = BIT(id + SENSOR0_SHIFT);
|
||||
+ /* HARDWARE BUG:
|
||||
+ * On platforms with more than 6 sensors, all remaining sensors
|
||||
+ * must be enabled together, otherwise undefined results are expected.
|
||||
+ * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
|
||||
+ * all the sensors are enabled in one step hence this bug is not
|
||||
+ * triggered.
|
||||
+ */
|
||||
+ if (id > 5)
|
||||
+ mask = GENMASK(10, 6);
|
||||
+
|
||||
+ mask <<= SENSOR0_SHIFT;
|
||||
+
|
||||
+ /* Sensors already enabled. Skip. */
|
||||
+ if ((reg & mask) == mask)
|
||||
+ return 0;
|
||||
+
|
||||
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
+ reg |= MEASURE_PERIOD;
|
||||
+
|
||||
if (priv->num_sensors > 1)
|
||||
reg |= mask | SLP_CLK_ENA | EN;
|
||||
else
|
|
@ -0,0 +1,109 @@
|
|||
From 1ff9f982051759e0387e8c7e793b49c48eae291d Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Wed, 25 Nov 2020 17:11:05 +0100
|
||||
Subject: [PATCH 06/10] drivers: thermal: tsens: Replace custom 8960 apis with
|
||||
generic apis
|
||||
|
||||
Rework calibrate function to use common function. Derive the offset from
|
||||
a missing hardcoded slope table and the data from the nvmem calib
|
||||
efuses.
|
||||
Drop custom get_temp function and use generic api.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
|
||||
1 file changed, 15 insertions(+), 41 deletions(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens-8960.c
|
||||
+++ b/drivers/thermal/qcom/tsens-8960.c
|
||||
@@ -67,6 +67,13 @@
|
||||
#define S9_STATUS_OFF 0x3674
|
||||
#define S10_STATUS_OFF 0x3678
|
||||
|
||||
+/* Original slope - 200 to compensate mC to C inaccuracy */
|
||||
+static u32 tsens_msm8960_slope[] = {
|
||||
+ 976, 976, 954, 976,
|
||||
+ 911, 932, 932, 999,
|
||||
+ 932, 999, 932
|
||||
+ };
|
||||
+
|
||||
static int suspend_8960(struct tsens_priv *priv)
|
||||
{
|
||||
int ret;
|
||||
@@ -194,9 +201,7 @@ static int calibrate_8960(struct tsens_p
|
||||
{
|
||||
int i;
|
||||
char *data;
|
||||
-
|
||||
- ssize_t num_read = priv->num_sensors;
|
||||
- struct tsens_sensor *s = priv->sensor;
|
||||
+ u32 p1[11];
|
||||
|
||||
data = qfprom_read(priv->dev, "calib");
|
||||
if (IS_ERR(data))
|
||||
@@ -204,49 +209,18 @@ static int calibrate_8960(struct tsens_p
|
||||
if (IS_ERR(data))
|
||||
return PTR_ERR(data);
|
||||
|
||||
- for (i = 0; i < num_read; i++, s++)
|
||||
- s->offset = data[i];
|
||||
+ for (i = 0; i < priv->num_sensors; i++) {
|
||||
+ p1[i] = data[i];
|
||||
+ priv->sensor[i].slope = tsens_msm8960_slope[i];
|
||||
+ }
|
||||
+
|
||||
+ compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
|
||||
|
||||
kfree(data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
-/* Temperature on y axis and ADC-code on x-axis */
|
||||
-static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
|
||||
-{
|
||||
- int slope, offset;
|
||||
-
|
||||
- slope = thermal_zone_get_slope(s->tzd);
|
||||
- offset = CAL_MDEGC - slope * s->offset;
|
||||
-
|
||||
- return adc_code * slope + offset;
|
||||
-}
|
||||
-
|
||||
-static int get_temp_8960(const struct tsens_sensor *s, int *temp)
|
||||
-{
|
||||
- int ret;
|
||||
- u32 code, trdy;
|
||||
- struct tsens_priv *priv = s->priv;
|
||||
- unsigned long timeout;
|
||||
-
|
||||
- timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
|
||||
- do {
|
||||
- ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
- if (!(trdy & TRDY_MASK))
|
||||
- continue;
|
||||
- ret = regmap_read(priv->tm_map, s->status, &code);
|
||||
- if (ret)
|
||||
- return ret;
|
||||
- *temp = code_to_mdegC(code, s);
|
||||
- return 0;
|
||||
- } while (time_before(jiffies, timeout));
|
||||
-
|
||||
- return -ETIMEDOUT;
|
||||
-}
|
||||
-
|
||||
static struct tsens_features tsens_8960_feat = {
|
||||
.ver_major = VER_0,
|
||||
.crit_int = 0,
|
||||
@@ -315,7 +289,7 @@ static const struct reg_field tsens_8960
|
||||
static const struct tsens_ops ops_8960 = {
|
||||
.init = init_common,
|
||||
.calibrate = calibrate_8960,
|
||||
- .get_temp = get_temp_8960,
|
||||
+ .get_temp = get_temp_common,
|
||||
.enable = enable_8960,
|
||||
.disable = disable_8960,
|
||||
.suspend = suspend_8960,
|
|
@ -0,0 +1,65 @@
|
|||
From 5716a61239c6ac9ceb137e825e93c3aea06c4634 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Fri, 19 Mar 2021 00:48:23 +0100
|
||||
Subject: [PATCH 07/10] drivers: thermal: tsens: Drop unused define for msm8960
|
||||
|
||||
Drop unused define for msm8960 replaced by generic api and reg_field.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
|
||||
1 file changed, 1 insertion(+), 23 deletions(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens-8960.c
|
||||
+++ b/drivers/thermal/qcom/tsens-8960.c
|
||||
@@ -10,8 +10,6 @@
|
||||
#include <linux/thermal.h>
|
||||
#include "tsens.h"
|
||||
|
||||
-#define CAL_MDEGC 30000
|
||||
-
|
||||
#define CONFIG_ADDR 0x3640
|
||||
#define CONFIG_ADDR_8660 0x3620
|
||||
/* CONFIG_ADDR bitmasks */
|
||||
@@ -21,39 +19,19 @@
|
||||
#define CONFIG_SHIFT_8660 28
|
||||
#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
|
||||
|
||||
-#define STATUS_CNTL_ADDR_8064 0x3660
|
||||
#define CNTL_ADDR 0x3620
|
||||
/* CNTL_ADDR bitmasks */
|
||||
#define EN BIT(0)
|
||||
#define SW_RST BIT(1)
|
||||
-#define SENSOR0_EN BIT(3)
|
||||
+
|
||||
#define MEASURE_PERIOD BIT(18)
|
||||
#define SLP_CLK_ENA BIT(26)
|
||||
#define SLP_CLK_ENA_8660 BIT(24)
|
||||
#define SENSOR0_SHIFT 3
|
||||
|
||||
-/* INT_STATUS_ADDR bitmasks */
|
||||
-#define MIN_STATUS_MASK BIT(0)
|
||||
-#define LOWER_STATUS_CLR BIT(1)
|
||||
-#define UPPER_STATUS_CLR BIT(2)
|
||||
-#define MAX_STATUS_MASK BIT(3)
|
||||
-
|
||||
#define THRESHOLD_ADDR 0x3624
|
||||
-/* THRESHOLD_ADDR bitmasks */
|
||||
-#define THRESHOLD_MAX_LIMIT_SHIFT 24
|
||||
-#define THRESHOLD_MIN_LIMIT_SHIFT 16
|
||||
-#define THRESHOLD_UPPER_LIMIT_SHIFT 8
|
||||
-#define THRESHOLD_LOWER_LIMIT_SHIFT 0
|
||||
-
|
||||
-/* Initial temperature threshold values */
|
||||
-#define LOWER_LIMIT_TH 0x50
|
||||
-#define UPPER_LIMIT_TH 0xdf
|
||||
-#define MIN_LIMIT_TH 0x0
|
||||
-#define MAX_LIMIT_TH 0xff
|
||||
|
||||
#define INT_STATUS_ADDR 0x363c
|
||||
-#define TRDY_MASK BIT(7)
|
||||
-#define TIMEOUT_US 100
|
||||
|
||||
#define S0_STATUS_OFF 0x3628
|
||||
#define S1_STATUS_OFF 0x362c
|
|
@ -0,0 +1,26 @@
|
|||
From 0d0c22a59bf2672b57e23da9a9ea743e91b71f54 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Sat, 25 Jul 2020 19:55:57 +0200
|
||||
Subject: [PATCH 08/10] drivers: thermal: tsens: Add support for ipq8064-tsens
|
||||
|
||||
Add support for tsens present in ipq806x SoCs based on generic msm8960
|
||||
tsens driver.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
---
|
||||
drivers/thermal/qcom/tsens.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens.c
|
||||
+++ b/drivers/thermal/qcom/tsens.c
|
||||
@@ -968,6 +968,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, t
|
||||
|
||||
static const struct of_device_id tsens_table[] = {
|
||||
{
|
||||
+ .compatible = "qcom,ipq8064-tsens",
|
||||
+ .data = &data_8960,
|
||||
+ }, {
|
||||
.compatible = "qcom,msm8916-tsens",
|
||||
.data = &data_8916,
|
||||
}, {
|
|
@ -0,0 +1,112 @@
|
|||
From ac369071920d427dd484cf74cddba2774bba45f5 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Thu, 9 Jul 2020 22:35:54 +0200
|
||||
Subject: [PATCH 09/10] dt-bindings: thermal: tsens: Document ipq8064 bindings
|
||||
|
||||
Document the use of bindings used for msm8960 tsens based devices.
|
||||
msm8960 use the same gcc regs and is set as a child of the qcom gcc.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||
---
|
||||
.../bindings/thermal/qcom-tsens.yaml | 56 ++++++++++++++++---
|
||||
1 file changed, 48 insertions(+), 8 deletions(-)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
|
||||
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
|
||||
@@ -19,6 +19,11 @@ description: |
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
+ - description: msm9860 TSENS based
|
||||
+ items:
|
||||
+ - enum:
|
||||
+ - qcom,ipq8064-tsens
|
||||
+
|
||||
- description: v0.1 of TSENS
|
||||
items:
|
||||
- enum:
|
||||
@@ -73,7 +78,9 @@ properties:
|
||||
maxItems: 2
|
||||
items:
|
||||
- const: calib
|
||||
- - const: calib_sel
|
||||
+ - enum:
|
||||
+ - calib_backup
|
||||
+ - calib_sel
|
||||
|
||||
"#qcom,sensors":
|
||||
description:
|
||||
@@ -88,12 +95,20 @@ properties:
|
||||
Number of cells required to uniquely identify the thermal sensors. Since
|
||||
we have multiple sensors this is set to 1
|
||||
|
||||
+required:
|
||||
+ - compatible
|
||||
+ - interrupts
|
||||
+ - interrupt-names
|
||||
+ - "#thermal-sensor-cells"
|
||||
+ - "#qcom,sensors"
|
||||
+
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
+ - qcom,ipq8064-tsens
|
||||
- qcom,msm8916-tsens
|
||||
- qcom,msm8974-tsens
|
||||
- qcom,msm8976-tsens
|
||||
@@ -114,19 +129,44 @@ allOf:
|
||||
interrupt-names:
|
||||
minItems: 2
|
||||
|
||||
-required:
|
||||
- - compatible
|
||||
- - reg
|
||||
- - "#qcom,sensors"
|
||||
- - interrupts
|
||||
- - interrupt-names
|
||||
- - "#thermal-sensor-cells"
|
||||
+ - if:
|
||||
+ properties:
|
||||
+ compatible:
|
||||
+ contains:
|
||||
+ enum:
|
||||
+ - qcom,tsens-v0_1
|
||||
+ - qcom,tsens-v1
|
||||
+ - qcom,tsens-v2
|
||||
+
|
||||
+ then:
|
||||
+ required:
|
||||
+ - reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
+ // Example msm9860 based SoC (ipq8064):
|
||||
+ gcc: clock-controller {
|
||||
+
|
||||
+ /* ... */
|
||||
+
|
||||
+ tsens: thermal-sensor {
|
||||
+ compatible = "qcom,ipq8064-tsens";
|
||||
+
|
||||
+ nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
|
||||
+ nvmem-cell-names = "calib", "calib_backup";
|
||||
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ interrupt-names = "uplow";
|
||||
+
|
||||
+ #qcom,sensors = <11>;
|
||||
+ #thermal-sensor-cells = <1>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ - |
|
||||
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
// Example 1 (legacy: for pre v1 IP):
|
||||
tsens1: thermal-sensor@900000 {
|
||||
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
|
|
@ -0,0 +1,32 @@
|
|||
From 68e720ed73c8f038c8c500e4c49c1e65a993a448 Mon Sep 17 00:00:00 2001
|
||||
From: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
Date: Tue, 6 Apr 2021 04:45:31 +0200
|
||||
Subject: [PATCH 10/10] drivers: thermal: tsens: Fix wrong slope on msm-8960
|
||||
|
||||
Some user using some stats with the old legacy implementation and the
|
||||
new implementation using the compute_intercept_slope reported an offset
|
||||
of 3C. Fix the slope table to reflect the original temp.
|
||||
|
||||
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
||||
---
|
||||
drivers/thermal/qcom/tsens-8960.c | 8 ++++----
|
||||
1 file changed, 4 insertions(+), 4 deletions(-)
|
||||
|
||||
--- a/drivers/thermal/qcom/tsens-8960.c
|
||||
+++ b/drivers/thermal/qcom/tsens-8960.c
|
||||
@@ -45,11 +45,11 @@
|
||||
#define S9_STATUS_OFF 0x3674
|
||||
#define S10_STATUS_OFF 0x3678
|
||||
|
||||
-/* Original slope - 200 to compensate mC to C inaccuracy */
|
||||
+/* Original slope - 350 to compensate mC to C inaccuracy */
|
||||
static u32 tsens_msm8960_slope[] = {
|
||||
- 976, 976, 954, 976,
|
||||
- 911, 932, 932, 999,
|
||||
- 932, 999, 932
|
||||
+ 826, 826, 804, 826,
|
||||
+ 761, 782, 782, 849,
|
||||
+ 782, 849, 782
|
||||
};
|
||||
|
||||
static int suspend_8960(struct tsens_priv *priv)
|
|
@ -0,0 +1,75 @@
|
|||
From e67f325e9cd67562b761e884680c0fec03a6f404 Mon Sep 17 00:00:00 2001
|
||||
From: Matthew Hagan <mnhagan88@gmail.com>
|
||||
Date: Tue, 8 Jun 2021 19:59:06 +0100
|
||||
Subject: net: stmmac: explicitly deassert GMAC_AHB_RESET
|
||||
|
||||
We are currently assuming that GMAC_AHB_RESET will already be deasserted
|
||||
by the bootloader. However if this has not been done, probing of the GMAC
|
||||
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
|
||||
prior to probing.
|
||||
|
||||
v2 changes:
|
||||
- remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
|
||||
- unwrap dev_err() message in stmmac_main.c
|
||||
- add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c
|
||||
|
||||
v3 changes:
|
||||
- add error pointer to dev_err() output
|
||||
- add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
|
||||
- revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
|
||||
on the returned value of ret by the calling function
|
||||
|
||||
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
|
||||
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||||
---
|
||||
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++
|
||||
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++++
|
||||
include/linux/stmmac.h | 1 +
|
||||
3 files changed, 12 insertions(+)
|
||||
|
||||
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
|
||||
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
|
||||
@@ -5023,6 +5023,10 @@ int stmmac_dvr_probe(struct device *devi
|
||||
reset_control_reset(priv->plat->stmmac_rst);
|
||||
}
|
||||
|
||||
+ ret = reset_control_deassert(priv->plat->stmmac_ahb_rst);
|
||||
+ if (ret == -ENOTSUPP)
|
||||
+ dev_err(priv->device, "unable to bring out of ahb reset\n");
|
||||
+
|
||||
/* Init MAC and get the capabilities */
|
||||
ret = stmmac_hw_init(priv);
|
||||
if (ret)
|
||||
@@ -5247,6 +5251,7 @@ int stmmac_dvr_remove(struct device *dev
|
||||
phylink_destroy(priv->phylink);
|
||||
if (priv->plat->stmmac_rst)
|
||||
reset_control_assert(priv->plat->stmmac_rst);
|
||||
+ reset_control_assert(priv->plat->stmmac_ahb_rst);
|
||||
pm_runtime_put(dev);
|
||||
pm_runtime_disable(dev);
|
||||
if (priv->hw->pcs != STMMAC_PCS_TBI &&
|
||||
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
|
||||
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
|
||||
@@ -617,6 +617,12 @@ stmmac_probe_config_dt(struct platform_d
|
||||
plat->stmmac_rst = NULL;
|
||||
}
|
||||
|
||||
+ plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
|
||||
+ &pdev->dev, "ahb");
|
||||
+ if (IS_ERR(plat->stmmac_ahb_rst))
|
||||
+ if (PTR_ERR(plat->stmmac_ahb_rst) == -EPROBE_DEFER)
|
||||
+ goto error_hw_init;
|
||||
+
|
||||
return plat;
|
||||
|
||||
error_hw_init:
|
||||
--- a/include/linux/stmmac.h
|
||||
+++ b/include/linux/stmmac.h
|
||||
@@ -192,6 +192,7 @@ struct plat_stmmacenet_data {
|
||||
unsigned int clk_ref_rate;
|
||||
s32 ptp_max_adj;
|
||||
struct reset_control *stmmac_rst;
|
||||
+ struct reset_control *stmmac_ahb_rst;
|
||||
struct stmmac_axi *axi;
|
||||
int has_gmac4;
|
||||
bool has_sun8i;
|
|
@ -0,0 +1,64 @@
|
|||
From f95c4c56d65225a537a2d88735fde7ec4d37641d Mon Sep 17 00:00:00 2001
|
||||
From: Matthew Hagan <mnhagan88@gmail.com>
|
||||
Date: Sat, 5 Jun 2021 18:35:38 +0100
|
||||
Subject: ARM: dts: qcom: add ahb reset to ipq806x-gmac
|
||||
|
||||
Add GMAC_AHB_RESET to the resets property of each gmac node.
|
||||
|
||||
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
|
||||
Link: https://lore.kernel.org/r/20210605173546.4102455-2-mnhagan88@gmail.com
|
||||
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
||||
---
|
||||
arch/arm/boot/dts/qcom-ipq8064.dtsi | 20 ++++++++++++--------
|
||||
1 file changed, 12 insertions(+), 8 deletions(-)
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -1335,8 +1335,9 @@
|
||||
clocks = <&gcc GMAC_CORE1_CLK>;
|
||||
clock-names = "stmmaceth";
|
||||
|
||||
- resets = <&gcc GMAC_CORE1_RESET>;
|
||||
- reset-names = "stmmaceth";
|
||||
+ resets = <&gcc GMAC_CORE1_RESET>,
|
||||
+ <&gcc GMAC_AHB_RESET>;
|
||||
+ reset-names = "stmmaceth", "ahb";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -1358,8 +1359,9 @@
|
||||
clocks = <&gcc GMAC_CORE2_CLK>;
|
||||
clock-names = "stmmaceth";
|
||||
|
||||
- resets = <&gcc GMAC_CORE2_RESET>;
|
||||
- reset-names = "stmmaceth";
|
||||
+ resets = <&gcc GMAC_CORE2_RESET>,
|
||||
+ <&gcc GMAC_AHB_RESET>;
|
||||
+ reset-names = "stmmaceth", "ahb";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -1381,8 +1383,9 @@
|
||||
clocks = <&gcc GMAC_CORE3_CLK>;
|
||||
clock-names = "stmmaceth";
|
||||
|
||||
- resets = <&gcc GMAC_CORE3_RESET>;
|
||||
- reset-names = "stmmaceth";
|
||||
+ resets = <&gcc GMAC_CORE3_RESET>,
|
||||
+ <&gcc GMAC_AHB_RESET>;
|
||||
+ reset-names = "stmmaceth", "ahb";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -1404,8 +1407,9 @@
|
||||
clocks = <&gcc GMAC_CORE4_CLK>;
|
||||
clock-names = "stmmaceth";
|
||||
|
||||
- resets = <&gcc GMAC_CORE4_RESET>;
|
||||
- reset-names = "stmmaceth";
|
||||
+ resets = <&gcc GMAC_CORE4_RESET>,
|
||||
+ <&gcc GMAC_AHB_RESET>;
|
||||
+ reset-names = "stmmaceth", "ahb";
|
||||
|
||||
status = "disabled";
|
||||
};
|
|
@ -1,6 +1,6 @@
|
|||
--- a/arch/arm/Kconfig
|
||||
+++ b/arch/arm/Kconfig
|
||||
@@ -1793,6 +1793,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL
|
||||
@@ -1794,6 +1794,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL
|
||||
|
||||
endchoice
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -128,6 +128,7 @@
|
||||
gpio-ranges = <&qcom_pinmux 0 0 69>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
+ #address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -155,6 +156,7 @@
|
||||
function = "pcie3_rst";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
+ output-low;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -190,6 +192,7 @@
|
||||
intc: interrupt-controller@2000000 {
|
||||
compatible = "qcom,msm-qgic2";
|
||||
interrupt-controller;
|
||||
+ #address-cells = <0>;
|
||||
#interrupt-cells = <3>;
|
||||
reg = <0x02000000 0x1000>,
|
||||
<0x02002000 0x1000>;
|
||||
@@ -630,10 +736,13 @@
|
||||
tsens_calib_backup: calib_backup@410 {
|
||||
reg = <0x410 0xb>;
|
||||
};
|
||||
+ speedbin_efuse: speedbin@0c0 {
|
||||
+ reg = <0x0c0 0x4>;
|
||||
+ };
|
||||
};
|
||||
|
||||
gcc: clock-controller@900000 {
|
||||
- compatible = "qcom,gcc-ipq8064";
|
||||
+ compatible = "qcom,gcc-ipq8064", "syscon";
|
||||
reg = <0x00900000 0x4000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
@@ -722,7 +749,7 @@
|
||||
|
||||
gmac0: ethernet@37000000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37000000 0x200000>;
|
||||
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -745,7 +772,7 @@
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37200000 0x200000>;
|
||||
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -768,7 +795,7 @@
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37400000 0x200000>;
|
||||
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
@@ -791,7 +818,7 @@
|
||||
|
||||
gmac3: ethernet@37600000 {
|
||||
device_type = "network";
|
||||
- compatible = "qcom,ipq806x-gmac";
|
||||
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
reg = <0x37600000 0x200000>;
|
||||
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
|
@ -1,355 +0,0 @@
|
|||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -8,6 +8,8 @@
|
||||
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
+#include <dt-bindings/mfd/qcom-rpm.h>
|
||||
+#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
@@ -28,6 +30,16 @@
|
||||
next-level-cache = <&L2>;
|
||||
qcom,acc = <&acc0>;
|
||||
qcom,saw = <&saw0>;
|
||||
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
|
||||
+ clock-names = "cpu", "l2";
|
||||
+ clock-latency = <100000>;
|
||||
+ cpu-supply = <&smb208_s2a>;
|
||||
+ operating-points-v2 = <&opp_table0>;
|
||||
+ voltage-tolerance = <5>;
|
||||
+ cooling-min-state = <0>;
|
||||
+ cooling-max-state = <10>;
|
||||
+ #cooling-cells = <2>;
|
||||
+ cpu-idle-states = <&CPU_SPC>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
@@ -38,16 +50,130 @@
|
||||
next-level-cache = <&L2>;
|
||||
qcom,acc = <&acc1>;
|
||||
qcom,saw = <&saw1>;
|
||||
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
|
||||
+ clock-names = "cpu", "l2";
|
||||
+ clock-latency = <100000>;
|
||||
+ cpu-supply = <&smb208_s2b>;
|
||||
+ operating-points-v2 = <&opp_table0>;
|
||||
+ voltage-tolerance = <5>;
|
||||
+ cooling-min-state = <0>;
|
||||
+ cooling-max-state = <10>;
|
||||
+ #cooling-cells = <2>;
|
||||
+ cpu-idle-states = <&CPU_SPC>;
|
||||
+ };
|
||||
+
|
||||
+ idle-states {
|
||||
+ CPU_SPC: spc {
|
||||
+ compatible = "qcom,idle-state-spc";
|
||||
+ status = "disabled";
|
||||
+ entry-latency-us = <400>;
|
||||
+ exit-latency-us = <900>;
|
||||
+ min-residency-us = <3000>;
|
||||
+ };
|
||||
};
|
||||
+ };
|
||||
|
||||
- L2: l2-cache {
|
||||
- compatible = "cache";
|
||||
- cache-level = <2>;
|
||||
+ opp_table_l2: opp_table_l2 {
|
||||
+ compatible = "operating-points-v2";
|
||||
+
|
||||
+ opp-384000000 {
|
||||
+ opp-hz = /bits/ 64 <384000000>;
|
||||
+ opp-microvolt = <1100000>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <0>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1000000000 {
|
||||
+ opp-hz = /bits/ 64 <1000000000>;
|
||||
+ opp-microvolt = <1100000>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1200000000 {
|
||||
+ opp-hz = /bits/ 64 <1200000000>;
|
||||
+ opp-microvolt = <1150000>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
+ opp_table0: opp_table0 {
|
||||
+ compatible = "operating-points-v2-kryo-cpu";
|
||||
+ nvmem-cells = <&speedbin_efuse>;
|
||||
+
|
||||
+ /*
|
||||
+ * Voltage thresholds are <target min max>
|
||||
+ */
|
||||
+ opp-384000000 {
|
||||
+ opp-hz = /bits/ 64 <384000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <0>;
|
||||
+ };
|
||||
+
|
||||
+ opp-600000000 {
|
||||
+ opp-hz = /bits/ 64 <600000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-800000000 {
|
||||
+ opp-hz = /bits/ 64 <800000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1000000000 {
|
||||
+ opp-hz = /bits/ 64 <1000000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <1>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1200000000 {
|
||||
+ opp-hz = /bits/ 64 <1200000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <2>;
|
||||
+ };
|
||||
+
|
||||
+ opp-1400000000 {
|
||||
+ opp-hz = /bits/ 64 <1400000000>;
|
||||
+ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
|
||||
+ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
|
||||
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
|
||||
+ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
|
||||
+ opp-supported-hw = <0x1>;
|
||||
+ clock-latency-ns = <100000>;
|
||||
+ opp-level = <2>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
thermal-zones {
|
||||
tsens_tz_sensor0 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&tsens 0>;
|
||||
@@ -93,6 +441,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ fab-scaling {
|
||||
+ compatible = "qcom,fab-scaling";
|
||||
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
|
||||
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
|
||||
+ fab_freq_high = <533000000>;
|
||||
+ fab_freq_nominal = <400000000>;
|
||||
+ cpu_freq_threshold = <1000000000>;
|
||||
+ };
|
||||
+
|
||||
firmware {
|
||||
scm {
|
||||
compatible = "qcom,scm-ipq806x", "qcom,scm";
|
||||
@@ -120,6 +477,17 @@
|
||||
reg-names = "lpass-lpaif";
|
||||
};
|
||||
|
||||
+ L2: l2-cache {
|
||||
+ compatible = "qcom,krait-cache", "cache";
|
||||
+ cache-level = <2>;
|
||||
+ qcom,saw = <&saw_l2>;
|
||||
+
|
||||
+ clocks = <&kraitcc 4>;
|
||||
+ clock-names = "l2";
|
||||
+ l2-supply = <&smb208_s1a>;
|
||||
+ operating-points-v2 = <&opp_table_l2>;
|
||||
+ };
|
||||
+
|
||||
qcom_pinmux: pinmux@800000 {
|
||||
compatible = "qcom,ipq8064-pinctrl";
|
||||
reg = <0x800000 0x4000>;
|
||||
@@ -160,6 +589,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ i2c4_pins: i2c4_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio12", "gpio13";
|
||||
+ function = "gsbi4";
|
||||
+ drive-strength = <12>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
@@ -169,6 +607,28 @@
|
||||
};
|
||||
};
|
||||
|
||||
+
|
||||
+ mdio0_pins: mdio0_pins {
|
||||
+ mux {
|
||||
+ pins = "gpio0", "gpio1";
|
||||
+ function = "mdio";
|
||||
+ drive-strength = <8>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rgmii2_pins: rgmii2_pins {
|
||||
+ mux {
|
||||
+ pins = "gpio27", "gpio28", "gpio29",
|
||||
+ "gpio30", "gpio31", "gpio32",
|
||||
+ "gpio51", "gpio52", "gpio59",
|
||||
+ "gpio60", "gpio61", "gpio62";
|
||||
+ function = "rgmii2";
|
||||
+ drive-strength = <8>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
leds_pins: leds_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9",
|
||||
@@ -243,6 +739,22 @@
|
||||
regulator;
|
||||
};
|
||||
|
||||
+ kraitcc: clock-controller {
|
||||
+ compatible = "qcom,krait-cc-v1";
|
||||
+ #clock-cells = <1>;
|
||||
+ };
|
||||
+
|
||||
+ saw_l2: regulator@02012000 {
|
||||
+ compatible = "qcom,saw2", "syscon";
|
||||
+ reg = <0x02012000 0x1000>;
|
||||
+ regulator;
|
||||
+ };
|
||||
+
|
||||
+ sic_non_secure: sic-non-secure@12100000 {
|
||||
+ compatible = "syscon";
|
||||
+ reg = <0x12100000 0x10000>;
|
||||
+ };
|
||||
+
|
||||
gsbi2: gsbi@12480000 {
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <2>;
|
||||
@@ -478,6 +985,11 @@
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
+ sfpb_mutex_block: syscon@1200600 {
|
||||
+ compatible = "syscon";
|
||||
+ reg = <0x01200600 0x100>;
|
||||
+ };
|
||||
+
|
||||
pcie0: pci@1b500000 {
|
||||
compatible = "qcom,pcie-ipq8064";
|
||||
reg = <0x1b500000 0x1000
|
||||
@@ -739,6 +1335,20 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
+ mdio0: mdio@37000000 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ compatible = "qcom,ipq8064-mdio", "syscon";
|
||||
+ reg = <0x37000000 0x200000>;
|
||||
+ resets = <&gcc GMAC_CORE1_RESET>;
|
||||
+ reset-names = "stmmaceth";
|
||||
+ clocks = <&gcc GMAC_CORE1_CLK>;
|
||||
+ clock-names = "stmmaceth";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
vsdcc_fixed: vsdcc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "SDCC Power";
|
||||
@@ -814,4 +1463,17 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ sfpb_mutex: sfpb-mutex {
|
||||
+ compatible = "qcom,sfpb-mutex";
|
||||
+ syscon = <&sfpb_mutex_block 4 4>;
|
||||
+
|
||||
+ #hwlock-cells = <1>;
|
||||
+ };
|
||||
+
|
||||
+ smem {
|
||||
+ compatible = "qcom,smem";
|
||||
+ memory-region = <&smem>;
|
||||
+ hwlocks = <&sfpb_mutex 3>;
|
||||
+ };
|
||||
};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -1020,6 +1020,37 @@
|
||||
compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
+ regulators {
|
||||
+ compatible = "qcom,rpm-smb208-regulators";
|
||||
+
|
||||
+ smb208_s1a: s1a {
|
||||
+ regulator-min-microvolt = <1050000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+
|
||||
+ smb208_s1b: s1b {
|
||||
+ regulator-min-microvolt = <1050000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+
|
||||
+ smb208_s2a: s2a {
|
||||
+ regulator-min-microvolt = < 800000>;
|
||||
+ regulator-max-microvolt = <1250000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+
|
||||
+ smb208_s2b: s2b {
|
||||
+ regulator-min-microvolt = < 800000>;
|
||||
+ regulator-max-microvolt = <1250000>;
|
||||
+
|
||||
+ qcom,switch-mode-frequency = <1200000>;
|
||||
+ };
|
||||
+ };
|
||||
};
|
||||
|
||||
tcsr: syscon@1a400000 {
|
|
@ -1,44 +0,0 @@
|
|||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -750,6 +750,41 @@
|
||||
reg = <0x12100000 0x10000>;
|
||||
};
|
||||
|
||||
+ gsbi1: gsbi@12440000 {
|
||||
+ compatible = "qcom,gsbi-v1.0.0";
|
||||
+ cell-index = <1>;
|
||||
+ reg = <0x12440000 0x100>;
|
||||
+ clocks = <&gcc GSBI1_H_CLK>;
|
||||
+ clock-names = "iface";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges;
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ syscon-tcsr = <&tcsr>;
|
||||
+
|
||||
+ gsbi1_serial: serial@12450000 {
|
||||
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||
+ reg = <0x12450000 0x100>,
|
||||
+ <0x12400000 0x03>;
|
||||
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ gsbi1_i2c: i2c@12460000 {
|
||||
+ compatible = "qcom,i2c-qup-v1.1.1";
|
||||
+ reg = <0x12460000 0x1000>;
|
||||
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
gsbi2: gsbi@12480000 {
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <2>;
|
Loading…
Add table
Add a link
Reference in a new issue